Big Problems with 975x power up edition

I'm on my second board. I'm running a Celeron 3.06 stock and OCZ gold 6400 RAM at 2.0 V. After changing the memory divider to 1.25, the board refuses to post. It powers on, the fans come on then powers off. This cycle repeats itself over and over without me touching the power button. Clearing the CMOS doesn't help. I currently left the battery out overnight and also unplugged the motherboard. I haven't tried it again today.
Of course I have tried switching the power supply, processor and RAM. this doesn't help.
Other issues that I've noticed include LAN isn't always detected in Windows XP. in the bios, the +12V is reported as 13 with both my Enermax and Fortron power supplies.
this board in its current state is a pain.
Celeron 3.06
Fortron 600 W
OCZ Gold 6400 RAM
Sapphire Radeon 1900xt
Benq 1655 DVDR
Western digital IDE
Segate SATA HD x 2 (non RAID)

I had this problem after changing my ram ratio and voltage.  Needless to say I was ready to cry 
I ended up trying the following:  Pulling wire from back.. no joy!    Clear CMOS.. no joy!    took memory sticks out and tried em in different slots.. no joy!  Had a mug of tea.. very calming and refreshing  Took graphics card and battery out because I was not sure the cmos clear switch was properly working, put it all back in and \o/ it booted albeit a bit shakey.
I reset bios settings and have not fiddled since.

Similar Messages

  • MS 7246 - 975X Power Up Edition (Problems)

    Hi! I am from Argentina and 7 months ago I been purchase a MS 7246 board. Since that time, I never could run my memories a 800MHZ and I never could make that my motherboard detect correctly my memories speed. I been really disappointed with msi and this motherboard, and sincerely I lost confidence in the support and manufacturing process; nevertheless, I will try posting my problem in this thread hoping that somebody could help me.
    Details about my hardware
    -   MSI 975x power up edition (BIOS 7.6)
    -   Intel core 2 6300
    -   2GB RAM DDR2 800MHZ Dual channel (OCZ2P8001G) 4-5-4-15
    -   Sapphire x850XT PCI-E
    My mother detects my memories as 667Mhz. System do not boot If I set manually my memories at 800Mhz using this configurations:
    -   CPU Clock X7
    -   FSB/Speed (266*7 = 1862Mhz @ Default speed)
    -   FSB & Memory ratio = 1.5 (Using “auto” here system detect memories speed @ 667Mhz)
    -   Memories speed (266*1.5*2=798 Mhz)
    -   Memories voltage 2.1v/2.2v
    -   CPU Voltage 1.25v/1.3v
    -   Other parameters are as default.
    Things that I been tried 
    -   I been tried setting by SPD or manually memories latencies at 4-5-4-15 but mother does not boot or simply hang.
    -   I been tried unsuccessfully increasing voltage to CPU or memories.
    -   I been tried unsuccessfully updating my bios but again nothing.
    I been read in internet that a loot! of people have similar problems. Some people fix those problems updating bios, but other people could not found a solution. Somebody could help me?
    Thank you very much!
    Eduardo 

    I had a look at your screenshots.  The first thing I noticed is that you RAM modules have really strange SPD values:
    Your stick's SPD values do not seem to comply with the JEDEC standard. Maybe this is an additional explanation to your problems causing BIOS and/or memory controller to be a little confused.
    The second thing I noticed is the fact that the automatic frequency/multiplier and Core voltage adjustions done by the C1E feature is now working properly:
    As you can see on the pictures I took from your screenshots, VCore and multiplier are now changing.  That means, that the feature is working properly.  If you close all background applications and running programs and leave only CPU-Z running, Core Voltage should drop to a certain minimum level and stay there with the multiplier set to x6.
    The fact that C1E is working now, could explain the small drop in temperatures to about 48°-50°C @CPU cores.
    Quote
    Comments:
    - Maybe cpu sensor is broken or bad? (I touch cpu cooler and is not so hot)
    I really doubt that.
    Quote
    - The northbridge 975x definitely is hot. (But i suppose that your should have same situation here)
    Yes, it has a tendency to get rather hot, especially if the system is overclocked.
    Quote
    - If I do not use my computer from 5 or 10 minutes temperatures decrease at 50ºc (core 0) and 48ºc (core 1), but not much more.
    This is the kind of drop I expected with C1E working properly again.
    Quote
    ¿Do you see something strange in my temperatures
    Your temperaturer are elevated and a little higher than average, but not really dangerous after all.  You should not worry yourself too much.  The shutdown temperature of your CPU is around 85°C.  So you still have some headroom. 
    However, if you find the time (and the money  ) you should at least consider optimizing your cooling solution, either by re-installing the heatsink and applying new and better thermal paste and by tweaking the airflow that goes through your case, or even better by installing a more efficient heatsink to your CPU. 
    Quote
    ¿Do you see something strange in my temperatures and memories?
    The issues you are experiencing with your memory are definately strange.  As I said before, I believe the reason is a rather simple incompatibility issue.  If this is caused by non-JEDEC SPD values or because your modules are of an older revision that use Elpida or Powerchip chips I don't know, but I am glad you were able to find a workaround.
    /UPDATE
    I googled around a little bit to find more information on general issures with the particular kind of OCZ modules you are using (OCZ2P8001G).  What I found was the following thread in the OCZ forum:
    http://www.xtremesystems.org/forums/showthread.php?t=112411
    If you find the time read a little bit around in it.  The fact that this thread exists asking for user reports on success/problem stories with this memory, if a clear indication that it is not an issue that has to do with your particular mainboard alone. In case you find 10 spare minutes to read around in it, pay attention to what is said about the revision and the chips used on the sticks.  Here are a few quotes from the thread. There are of course other voices as well, pointing to the chipset or the board in use.  But there seem to be quite a few different boards by all brands involved.  However, I dare to say that overall picture doesn't look to well for the modules: 
    Quote
    Yea but if you RMA them you just get the same model back. I don't think it would solve anything  (Unless they are giving out Rev2s?)
    Quote
    Well i've had nothing but problems with the 2 sets i've had. No one at OCZ informed me that i needed the rev2's to work how i want.
    Quote
    I'm pretty sure that OCZ gets the same Elpida chips from Samsung that other DIMM makers get. The only things specific to OCZ would be the PCB, SPD programming and speed binning.
    Quote
    That is what prompted Tony to suggest an RMA. That is how I know it is the ram having problems not the board.
    Quote
    If the ram won't do specified speeds, no matter what divider used, then off course something is wrong, but getting 4 sticks that stops at the exact same speeds is close to impossible. Send either myself or Ryder an email and we will sort you out. I will make sure you get an advanced shipment sent out today if you want.
    Quote
    All I really know about Rev. 1 ELP is that an OCZ rep told me it used the same Elpida chips as Gold but was higher binned. Rev. 2 uses different chips.
    Quote
    I don't know but IIRC, I read someone here post that they are using Micron D9xxx. Given the higher cost of rev. 2, that seems plausible enough.
    Quote
    If you are using Rev1, you are the first I've heard without problems.
    Quote
    I think the problem is rather isolated to only a group of people with bad sticks.

  • 975X Power Up Edition & Zalman 7700 heatsink

    I ordered a Zalman 7700 Heatsink and i have a 975X power up edition. I'm afraid this is not going to fit now, does anyone know if it does? I'm very concerned, I really wanted it to work.

    Quote from: NrthnStar5 on 03-August-07, 01:04:00
    I got it on no problem there, it is big. however I wanted to ask other users of this heatsink what their temps are. My CPU seems to idle around 37-39 C Degrees and under load will go up to 41-43 C Degrees. Fan setting is on the lowest. Is this normal? It's about the same as the stock heatsink. I did notice my case temp is quite a bit lower however which is nice and it's much quieter.
    Your temps are normal.
    Mine are idle at 33-37 C and 41-45 C under load with a Zalman 9700 and fan setting also on lowest, so there is nothing to worry about

  • I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.

    I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.
    at least that the operator has confirmed to me that he called me. I also have problems with either the start of the mac with the power off. I can not understand if it crashes or is just very very slow.
    Finally, I have a problem with the external hard disck. I often said to have been ejected incorrectly (not true) and I start to restore the startup recovery disk because disk utility is ineffective from the normal operating system .. is a shocking thing, but how you reduced. in four years it had never happened. seem to have windows or worse. Wake up.
    I am an Italian, alas, and then I would like an answer to my language because my € are the same as German French or English.

    You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
    Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
    If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
    Once you are using the "Firefox" button ...
    Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
    To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
    You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • Problem with launching 10g express edition

    Hi, i am from Czech Republic and i have big problem with launching Oracle database 10g Express Edition.
    After instal program i launch "Go to Database Home Page" and IE write to me "Page not found" (web adress is http://127.0.0.1:8080/apex).
    Please,can anyone help me what i have to do to launch it correctly?
    Thank you.
    Message was edited by:
    user628210
    Message was edited by:
    user628210

    hi again. first a have to apologize. i have oracle
    database express edition 10g from school,so i dont
    have registered version.When I said 'register' I didn't mean have it licensed, Oracle XE doesn't require any kind of license registration, it is free. By registering it I meant a technical issue. Once the database is started it tries to contact the listener at 1521 port, once contacted the oracle instance registers itself against it, and if it is successful you will have the administrator's page initialized and ready to access at the default 8080 port.
    when i type SQL commands, command line wrote me
    SP2-0734:unknown command beginning ENTERED COMMAND
    Could you please specify which command did you try to enter?
    >
    and when i open RUN DATABASE, command line wrote
    C:\OracleDatabase\app\oracle\product\10.2.0\server\BIN
    net started OracleServiceXE - system error 5, accessdenied
    What do you mean with 'RUN DATABASE'?
    ~ Madrid
    http://hrivera99.blogspot.com/

  • Having big problems with Creative Zen Micro Photo!! I need much urgent help!

    Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
    I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PM

    Might try this:? http://forums.creative.com/creativel...mp=true#M95059

  • Very big problem with JSF about FORM and "id=" for HTML form's elements and

    I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
    Suppose you have something like this, to render some datas form a Java Beans :
    <h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
    <h:column>
    <f:facet name="header">
    <h:outputText value="Name"/>
    </f:facet>
    <h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
    </h:column>
    </h:dataTable>
    Everything works fine...
    Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
    <td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
    You think you can use the java instructions :
    Enumeration NamesParam = request.getParameterNames();
    while (NomsParam.hasMoreElements()) {
    String NameParam = (String) NamesParam.nextElement();
    out.println("<h4>"++NameParam+ "+</h4>);
    YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
    Edited by: ungars on Jul 18, 2010 12:43 AM
    Edited by: ungars on Jul 18, 2010 12:45 AM

    While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
    However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
    In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
    "Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
    If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
    https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
    If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
    I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
    Ed

  • Big problem with playing videos on Vista

    I have a big problem with iTunes and Quick Time on Vista. I know other people in the german cmmunity who have it, too.
    If ich want to play a video with iTunes or Quickt Time my PC starts wokring very heavy. Then the programm shut down. Sometimes there is a bluescreen, too.
    In iTunes it is enough just to leftclick on a video an the programm is freezing without an error message.
    I bought a new iPod classic some days ago. With this error i can't use it and 350 € would be thrown away.
    I installed both prgramms again and again but that's no use.

    Seems to be a hard drive issue. I sometimes get the blue screen of death or a message that one of my 2 raid0 hard drives is starting to fall down. If I restart the PC (3 seconds on the power button... since iTunes blocked everything) and declare the hard drive is OK using the Intel Matrix soft provided by Dell on their website, everything is back to normal (as long as I don't use iTunes). Problem only occurs with iTunes. I am currently doing a backup of my complete HDD to an external drive. I'll try moving my iTunes library to this drive and see if it works better from a non raid 0 drive. Will keep you informed. But an external drive is always VERY slow compared to an internal so it can only be a degraded mode solution to the problem. Apple please do something!!!

  • Big problem with photos after update to iOS 4.3

    Hi everyone,
    I have a big problem with the photos on my iPhone 4 after updating to 4.3
    There is not enough space for them, anymore. Before the update I had about 9000 photos synced with iTunes -and I had about 10 GB free. Now, iTunes can't sync the photos anymore because there is not enough space on the iPhone??? The same amount of photos does not fit anymore. I suppose there is an error in the Itunes photo compression module. Anybody else with the problem? Any suggestions for a workaround?
    Thanks, Olaf
    Update: The same number of photos is taking up three times as much space than before.
    Message was edited by: olafoio

    Me too, but I have the solution.
    There seems to be 2 problems. First, for some reason your data is taking up more space post update, so if you were close to filling your device, you now overrun. This isn't well handeld by iTunes, but doesn't seem to be the biggest problem as I'm sure that would sort itself out if you could just get it to sync.
    The root problem is the 2nd one - the missing file. Mine was a photo, but it took me ages to find it and you're not going to like how I did it. I started to untick things to sync one by one (music first) and attempting the re-sync. I found that it was a file in my photos that was causing the problem, so I removed those and then re-loaded everything back up and I'm now OK again. I use Aperture to sync with.
    I had the same problem with the last OS update and it's a pain because it takes ages to sort with a nearly full 32G device.
    Now onto my iPad for an update, but that's proving to be a non-starter as the thing wont back up due to "another session in progress". More rooting around to solve that I guess......

  • 975X Power Up Edition + 800MHZ Ram

    Greetings everyone
    975X power up edition mobo, just got Corsair XMS2 6400 Ram, however the ram is not running at 6400/800mhz, but instead running at 667MHZ. I've reset my bios and still no change. Any suggestions on why this is?

    Quote from: Jack the Newbie on 04-August-07, 23:00:21
    It would be interesting to really verify that.
    Have a look at this list as well:
    http://ramlist.ath.cx/ddr2/
    Ok, Let's sum it up then
    First check this thread on the OCZ forum http://www.ocztechnologyforum.com/forum/showthread.php?t=25766&highlight=msi+975x+platinum+powerup+edition
    Viktor92 first used OCZ Gold DDR2 800, but then he couldn't post his pc. These modules have Powerchip chips.
    He then used OCZ DDR2 667, but couldn't get pasted 310Mhz FSB. These modules have Micron D9DQT (BT-3) chips, these are no longer in production
    He then replace the OCZ modules with G. Skill DDR2 800 Mhz modules which have for the most part Micron D9 chips or ProMOS 6-layer PCB. He could set his FSB to 333Mhz and run it stable.
    Now Mushkin PC2-6400 HP2 (2x2GB) has either Micron D9HBD (B7-37E)  Brainpower PCB or Micron D9GSV (B7-3) Brainpower PCB on it.
    Jack, you have Micron D9GMH (B6-3)  6-layer PCB chips, Micron D9GCT (B6-37E) (some)  6-layer PCB or Elpida  AG-6E-E  (before 05/2006)  6-layer PCB on your G.Skill-Kit (F2-6400PHU2-2GBHZ) memory and have the FSb on 346Mhz so that type of memory works ok.
    *edit: Just saw Viktor92 his post, thanks man! He has G. Skill F2-6400CL4D-2GBPK and those also have have ProMOS  6-layer PCB chips on it.*
    Finally I use GEIL PC26400 Ultra modules and those have either Aeneon AET93F30D or Elpida chips on it. I can't get passed the 310Mhz FSB so these are a no go for overclockers.
    So if you can reach a higher FSB than 310Mhz with the above Mushkin modules or with G. Skill modules or any other modules with Micron D9 chips or ProMOS 6-layer PCB chips on it then you could conclude that those modules are the best to go with this board. Do you agree with me?
    btw, I asked some techsupport guy of OCZ to test 4GB D/C Kit PN - OCZ2G8004GK and 4GB D/C Kit PN - OCZ2P8004GK memory kits for me to see if they work stable with a FSB higher than 310Mhz.
    Hopefully I will get an answer from him.

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

  • Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

    Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

    when I launch Photoshop CC, I get an error message
    and what exactly is the text of that error message?

  • My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

    My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!

    I think many of us need a Defense Against the Podcasts App professor.
    Have you looked at this Apple support page?
    http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US

  • I am no longer being asked for a password when downloading an app, big problem with kids

    I am no longer being asked for a password when downloading an app or music in iTunes, big problem with kids. How do I enable

    To elaborate further, in those restrictions you can specify exactly what types of actions you would like to restrict.
    I think you'll find this accomplishes your objective.

  • Problems with my power adapter!!!!

    I just got a new adapter for my Powerbook G4 the other day because the wiring at the plug on my old one wore out. My problem is that the new adapter, when plugged into my computer, sometimes just stops working like it has been unplugged or something. After unplugging the adapter from the wall socket and reinserting, it works fine until my computer goes to sleep. At some point in sleep mode, the little light from the plug in the computer turns off and my computer is only running on battery. This in itself is not that bad, but it gets to be a hassle having to unplug and then re-plug the wall plug everytime my computer goes to sleep. Can anyone help me understand this a little better?

    I purchased by G4 six months ago. Since Day one, I have had problems with the power. If I leave the computer plugged into the outlet 24 hours a day, the battery will slowly begin to drain. Even if I never unplug the power source from my computer, the computer begins to drain battery life. For example, I went to bed with my computer charged @ 100%. This morning (all while my computer was sleeping), I have 8% Battery Life left.
    I've spent 5-6 phone calls with Apple Care on this issue with no resolution. I sent my G4 off to Apple Care 2 weeks ago and they returned it with a "We Don't Recognize a Problem". I about went through the roof. And, yes, this happens with any outlet I use.
    I expect more from a $2500+ machine and their "award winning" customer service.
    Help?

Maybe you are looking for

  • What is the meaning of pricing attribute AC_INDICATOR

    Hi all, Could someone tell me what's the meaning of pricing attribute AC_INDICATOR? Best regards, Piercarlo

  • ServerSocket problems accepting 2 client at the same time

    hi all, i wrote a simple client-server pair, to synchronize databases, and works fine. but i found a problem: all ok when 2 clients try to connect to the server whit a little gap (ie 1 second), the problem is when they try to connect EXACTLY at the s

  • Fan does not operate

    HP Pavilion g7-1328dx Windows 7 I get a fan error message.  fan is not operating

  • Dynamic list heading.

    Hi, Can some one send some sample code for displaying headings dynamically and generating 2 lists at a time.It will be of great use to me.. Thanks,

  • Old timer

    I was certified a long time ago. What exactly do I have to do to get on certview? I may have tried to upgrade a few years ago but gave up.