Bizarre behavior with loadMovie and JPGs

I have a Flash CS3 (AS 2.0) image gallery that first loads
all the image URLs and reference IDs into an array from an XML
file. It then retrieves the selected thumbnail URL from the calling
PHP file as a default using loadVariables. Once the user is in the
SWF, they can navigate back and forth through the image list.
Here is the bizarre part:
I recently posted 2 more images and updated the corresponding
reference XML file. When I test it on my local machine, everything
runs smoothly. On the web server, it cannot load only the latest
images. All other images load!
I imagine this is a stretch, but has ANYONE experienced
something similar to this??
Thanks

Correct. If you clicked on thumbnail 41 or 42, a separate
window appears where you can view the full-sized image. Were you
able to see it?
I took your advice and looked at the XML file for Patios. The
recently added image records refer to URLs with the extension .JPG,
but the image files themselves are stored as .jpg. So the case is
different, and you're probably right that that is the problem. What
I still don't understand is the different behavior running locally
vs. from the server.
Thanks for the dialog!
M

Similar Messages

HT5117 I am producing an ibook with video and jpg images, what sizes should they be?

I am producing an ibook with video and jpg images, what sizes should they be?
<Image Edited by Host>

I and others answered a similar question only yesterday.
There are also many other similar posts and it is advised we first check out "our" problem by doing a search.
I also suggest you download "iBookstore Asset Guide 5" its a pdf and contains all the information you ask for.

Bizarre behavior with Keyword Tags and their check marks

I'm using LR v1.1. I ran into a bizarre situation today, but don't know how I got into it or how it finally was resolved.
I wanted to view all my photos in the Library view. Under the section "Keyword Tags" there were already check marks in in front of some keywords. I couldn't find a way to uncheck the check mark in front of them (which evidently only shows up on Intel Macs as mine). It seemed (and I could be wrong) that if I clicked on a check mark to try to remove it, a check mark suddenly appeared in front of a *different* keyword(!)
I also couldn't find a way to have no keyword selected at all.
Finally the checkmarks and the selection of the keyword tags disappeared, but I don't know the cause or the cure of this.
I'm on a MacPro with OS 10.4.10 with 6 GB RAM and just 1,300+ photos in my LR Library so far.

The check marks indicate the selected photos have those keywords. They are not selectable, the keywords are.

Strange behavior with Zoom and Image control

HELP - I have a strange behavior (bug?) with using Zoom
effect on an Image that has been placed on a Canvas. I am using
dynamically instantiated images which are placed on a canvas inside
a panel. I then assign a Zoom IN and Zoom Out behavior to the
image, triggered by ROLL_OVER and ROLL_OUT effect triggers. THE BUG
is that the image jumps around on the Zoom OUT and lands on a
random place on the canvas instead of coming back to the original
spot. This is especially true if the mouse goes in and out of the
image very quickly. HELP -- what am I doing wrong? Computer = Mac
OS X 10.4.9 Flex 2.0.1
Here's a simple demo of the bug -- be sure to move the mouse
in and out rapidly:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" creationComplete="setUp();">
<mx:Script><![CDATA[
import mx.events.EffectEvent;
import mx.effects.Fade;
import mx.effects.Zoom;
import mx.rpc.events.ResultEvent;
import flash.display.Sprite;
import mx.core.UIComponent;
import mx.controls.Image;
private var zoomIn:Zoom;
private var zoomOut:Zoom;
private function setUp():void {
var image:Image = new Image();
image.id = "album_1_1";
image.x = 200;
image.y = 200;
image.width = 64;
image.height = 64;
image.source = "
http://s3.amazonaws.com/davidmccallie/album-128.jpg";
image.addEventListener(MouseEvent.ROLL_OVER, doZoom);
image.addEventListener(MouseEvent.ROLL_OUT, doZoom);
myCanvas.addChild(image);
zoomIn = new Zoom();
zoomIn.zoomHeightTo = 2.0;
zoomIn.zoomWidthTo = 2.0;
zoomIn.captureRollEvents = true;
zoomIn.suspendBackgroundProcessing = true;
zoomOut = new Zoom();
zoomOut.zoomHeightTo = 1.0;
zoomOut.zoomWidthTo = 1.0;
zoomOut.captureRollEvents = true;
zoomOut.suspendBackgroundProcessing = true;
private function doZoom(event:MouseEvent):void {
var image:Image = Image(event.currentTarget);
if (event.type == MouseEvent.ROLL_OVER) {
zoomIn.target = event.currentTarget;
zoomIn.play();
} else if (event.type == MouseEvent.ROLL_OUT) {
zoomOut.target = event.currentTarget;
zoomOut.play();
]]>
</mx:Script>
<mx:Panel width="100%" height="100%"
layout="absolute">
<mx:Canvas id="myCanvas" width="100%" height="100%">
</mx:Canvas>
</mx:Panel>
</mx:Application>

There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect?

Unexpected behavior with UIWebView and Apple website

I am experiencing a very weird behavior when I try to load the new Apple website (www.apple.com) within a UIWebView. It first loads ok but when it finishes loading the WebView switches to a blank page.
I don't experience this kind of problem with other websites that I have tested. Therefore I don't believe that this is an issue of my application.
Could someone please do me a favor and confirm this behavior?
Thanks a lot,
Florian

Actually, Apple has always supported using custom folders in iMap for Deleted Messages, Drafts, Sent, & Junk. But I agree that with the release of 10.7.2 and iCloud with their new Archive feature, they haven't made it easy!
I run my Mac in Swedish, so forgive me if I don't remember or get the exact wording of each option 100% correct, but I'm sure you'll figure it:
In Mail Settings under your iCloud account, and in the middle tab (Mail Box Functions?), under the trash option at the bottom, make sure that:
Move deleted mail to the trash can is Checked!
Save deleted mail on on the server is Checked!
Delete trashed (?) mail permanently is set to NEVER!
Then go back to the main mail window and display the folders for your iCloud account on the LH side
Select your achive folder.
Go to the Mail Box menu in the menubar, Select "Use this mailbox for..." and then Select trash.
You will not notice that your archive folder now appears under the trash can in Apple Lion Mail (and the deleted items folder that is no longer the trash will appear under the folders).
This works a treat, and in fact I use this for Gmail as well. If you're interested, I have so much mail in all mail, but I want to have everything in Apple Mail. I also get to have a private backup on my Mac (and Time Machine).
So, in Gmail, I have an "Apple Trash" folder which I link to deleted items as above, and which every six months or so I relabel (in the gmail app) to another folder. That way I don't have 50,000 mails in my trash. I don't activate All Mail in Gmail's IMAP because everything I have is always in at least one other folder / lable which syncs to my mac!

Simulate gmail archive behavior with iCloud and apple mail (lion)

does anyone know of a way to configure an iCloud mail account in apple mail (lion) such that the delete button actually archives email? i'd like to simulate the behavior of a gmail account in apple mail, which does just that, i.e. delete sends messages to the "All Mail" folder. in this case, i'd like it to send emails to the "Archive" folder. as i have one gmail account and one iCloud account, it would be great if there was one consistent means of archiving mail, versus using the ctrl-cmd-A shortcut for iCloud mail.
iOS 5 actually has such a setting to do just that: "Archive Messages" under the iCloud mail settings. so it seems strange to me that apple mail would not.
thanks!

Actually, Apple has always supported using custom folders in iMap for Deleted Messages, Drafts, Sent, & Junk. But I agree that with the release of 10.7.2 and iCloud with their new Archive feature, they haven't made it easy!
I run my Mac in Swedish, so forgive me if I don't remember or get the exact wording of each option 100% correct, but I'm sure you'll figure it:
In Mail Settings under your iCloud account, and in the middle tab (Mail Box Functions?), under the trash option at the bottom, make sure that:
Move deleted mail to the trash can is Checked!
Save deleted mail on on the server is Checked!
Delete trashed (?) mail permanently is set to NEVER!
Then go back to the main mail window and display the folders for your iCloud account on the LH side
Select your achive folder.
Go to the Mail Box menu in the menubar, Select "Use this mailbox for..." and then Select trash.
You will not notice that your archive folder now appears under the trash can in Apple Lion Mail (and the deleted items folder that is no longer the trash will appear under the folders).
This works a treat, and in fact I use this for Gmail as well. If you're interested, I have so much mail in all mail, but I want to have everything in Apple Mail. I also get to have a private backup on my Mac (and Time Machine).
So, in Gmail, I have an "Apple Trash" folder which I link to deleted items as above, and which every six months or so I relabel (in the gmail app) to another folder. That way I don't have 50,000 mails in my trash. I don't activate All Mail in Gmail's IMAP because everything I have is always in at least one other folder / lable which syncs to my mac!

Strange behavior with Premiere and effects in CS6

Hello
I created a PS file with several layers of a subject for a TV show idea i am preparing for a presintation but every time a render my effects are not as i see them., speciffialy the 8-16 point Garbage mattes and keying.
The PS files where dragged and dropped into Premiere and as Sequences to maintin them in folders and in a Nested Sequence.,
Then i sort of sequences masked PS layers, using Ultra key to punch out the greene screen, 8/16 point Gabrage mattes to take out any other noise or background images un wanted, MOJO to warm up the subject i then placed the sequence as a NESTED sequence in my time line, but when i would render the Garbage Mattes, keying and all would be partially showing a previous tweek, but when i open the nested Sequence i would not see these errors or older tweeks, yet in the main Sequence aka composition i would see them yet when i would place the mouse over the time line to select an area for the position to play they would go away again,
sounds like a bug?
OSX10.7.4
imac i7 12GB
8TB RAID
CS6 Suite
Message was edited by: Andrew Yoole
This message was relocated from the After Effects Forum.

There must be bugs in the Zoom effect code -- I changed the
Zoom to Resize in the above code, and it works perfectly. Of
course, Resize is not as nice as Zoom because you can't set the
resize to be around the center of the image, but at least it works.
Does anyone know about bugs in the Zoom effect?

I attach a file in mail and the whole thing shows there ie. attach a PDF and the whole pdf content is displayed in the mail. Anyone know how I just get the icon toi appear as the attachment rather than the whole file? This only happens with pdf and jpg

Hi Folks,
When I attach a jpg or pdf to a mail it shows as the whole document "pasted" into the mail. Anyone know how I get the file to just show as an icon and not as a mass of pasted in docs?
Thanks,
Pedro

For your own viewing, you can of course control-click on the attachment and select "View as Icon".
For others' viewing, it depends upon their email reader. To ensure that attachments are not displayed expicitly you can put them all in a zip file (via control click and "Compress") then attaching them, or you can use third party stuff like Attachment Tamer.
charlie

Strange CSS behavior with IE9 and JDeveloper 11.1.1.6.0?

I am working with JDeveloper 11.1.1.6.0 and ADF. There is a single skinning CSS file that is just over 7800 lines. Everything is fine in Chrome, Firefox, IE7, IE8, and IE10. However, when running the application in IE9 some styles are not getting applied.
I noticed that the elements that were not getting styled were further down in the CSS file (around line 7500). I cut and pasted the styles at the beginning of the CSS file, refreshed, and lo and behold the elements that were not styled before were now getting their styles (I could inspect the page and see that the CSS wasn't getting loaded at all - not an issue with the CSS selectors not matching the HTML being rendered).
First I thought it may be a file size thing, but after reading this post, I'm not so sure. Plus that wouldn't explain why I only have the problem in IE9.
Has anyone run into any issues with IE9? It seems very strange to me that this would be a browser problem. My first thought was that there was some error or invalid CSS being used, but I started with a line of CSS and moved it further down in the order until it stopped working (I changed the background on the header to pink). There was one line of CSS where the background would be pink when applied on the line directly before, but when applying directly after the background was gray again. I scoured the CSS but couldn't see anything wrong with it (see below). I removed the CSS in question and the header background showed pink again. Moved it down a few lines and it stopped getting picked up by IE9. Continued this process but wasn't able to find a solution.
Here is the CSS in question in case something happens to stand out to someone else (I thought maybe "domready" was a reserved word or something):
table.plan-slab td.cereal-box af|panelGroupLayout.cereal-box-detail af|panelGroupLayout.plan-cost-domready,
table.cereal-box td.cereal-box-detail af|panelGroupLayout.cereal-box-detail-wrap af|panelGroupLayout.plan-cost-domready {
    position: absolute;
    left: 5px;
    right: 8px;
    bottom: 5px;

IE 6-9 do have CSS size limits, may be more pronounced in IE 9.
IE 10 has the limits raised.
http://blogs.msdn.com/b/ieinternals/archive/2011/05/14/10164546.aspx
http://support.microsoft.com/kb/262161

Strange behavior with getCommonCharacterFormat and links

I am working on a texteditor using TLF and Flash CS5. The problem I have is that when I use getCommonCharacterFormat on a single point selection the behavior is different if I have a link-tag adjacent to the selection compared to not having it.
Think of a text like this: "Hello beautiful world!"
- When I place the cursor at the end of the text in bold the format says bold and when i continue to write the text will be in bold.
- When I place the cursor just before the text in bold the format says not bold and when i continue to write the text will not be in bold.
This makes perfectly sence to me and is exactly what I would expect to happen.
But if I make the word "beautiful" into a link the behavior is very different.
- When I place the cursor at the end of the text in bold the format says not bold but when i continue to write the text will be in bold.
- When I place the cursor just before the text in bold the format says bold but when i continue to write the text will not be in bold.
Is this a bug or is there a good explanation to this behaviour? Should I do want I want to do in a different way?
I you want me to I can paste some example code that illustrates my problem.
/Peter

Sounds like a bug. The issue, for what it's worth, is that typing after a link is different than typing after a span, because new text that you type isn't added to the link. We'll investigate.
- robin

Strange behavior with 3560s and RPS 2300

I just installed an RPS 2300 in a small branch office that has a pair of WS-C3560-24PS switches. There are two odd things I'm noticing:
1) When I do "show env rps", it shows the RPS detected but I don't get any information about it.
Switch#show env rps
SW Status RPS Name RPS Serial# RPS Port#
1 Active <>
2) When the switch loses power it fails over to the RPS just fine, but does not fail back to regular power automatically. I have to unplug the RPS.
I've installed same model RPS with a pair of 3750-Es switches, and in that case, "show env rps" from the switch shows me the RPS information, and failback happens when regular power is restored.
Is there something different about the 3560s, or did I miss something in the configuration? The switches are running 12.2(55)SE7, IP Services.

Yes, just found via searching automatic failback is only supported on the 3560-E and 3750-E.
https://supportforums.cisco.com/message/3669961#3669961
Also noticed the "power rps" commands are only supported on the 3560v2, so those won't work for me.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3560/software/release/12-2_52_se/command/reference/3560cr/cli1.html#wpmkr11908996
What's funny is while the exec commands don't work, the config-mode commands do.
Switch#power rps name serialnumber
Can not execute cmd on legacy switch 1
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#power rps deviceid serialnumber
Oh well. I've been wanting to replace the 3560s with 3750Gs, so this is yet another reason to do so!

Very strange behavior with to_date and format 'yddd' after 31/12/2009

Hi, I have the following PL/SQL code which retrieve a date from a production batch code as fallow:
DECLARE
dtmDateFabric DATE;
BEGIN
-- on teste si l'on peut reconstituer la date fabric à partir du code lot
dtmDateFabric := TO_DATE ('9348', 'yddd');
DBMS_OUTPUT.put_line ('dtmdatefabric ' || dtmDateFabric);
END;
batch code is constitued like this: YDDD year of production and day number in year.
This code was perfectly working before 2010 and it used to return December 14, 2009.
And now the same code returns December 14, 2019.
And I can't use 'rddd' as format.
Any idea to resolve this issue ?
Thank's for help.
Olivier

It's not strange at all, we are in 2010 now, so if don't specify the decade, century and millennium it takes the current: 2 (millennium) 0(century) 1(decade) and your year becomes 2019...
You have to add a byte to your year format to specify the decade:
SQL> DECLARE
2 dtmDateFabric DATE;
3 BEGIN
4 -- on teste si l'on peut reconstituer la date fabric à partir du code lot
5 dtmDateFabric := TO_DATE ('09348', 'yyddd');
6 DBMS_OUTPUT.put_line ('dtmdatefabric ' || dtmDateFabric);
7 END;
8 /
dtmdatefabric 14-12-2009 00:00:00
Procedura PL/SQL completata correttamente.And you'll be ok untill 2099...
Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2010/01/07/creare-documenti-office-da-plsql/]
Edited by: Massimo Ruocchio on Jan 8, 2010 4:40 PM
Added explaination

Index issue with or and between when we set one partition index to unusable

Need to understand why optimizer unable to use index in case of "OR" whenn we set one partition index to unusable, the same query with between uses index.
“OR” condition fetch less data comparing to “BETWEEN” still oracle optimizer unable to use indexes in case of “OR”
1. Created local index on partitioned table
2. ndex partition t_dec_2009 set to unusable
-- Partitioned local Index behavior with “OR” and with “BETWEEN”
SQL> CREATE TABLE t (
2    id NUMBER NOT NULL,
3    d DATE NOT NULL,
4    n NUMBER NOT NULL,
5    pad VARCHAR2(4000) NOT NULL
6 )
7 PARTITION BY RANGE (d) (
8    PARTITION t_jan_2009 VALUES LESS THAN (to_date('2009-02-01','yyyy-mm-dd')),
9    PARTITION t_feb_2009 VALUES LESS THAN (to_date('2009-03-01','yyyy-mm-dd')),
10    PARTITION t_mar_2009 VALUES LESS THAN (to_date('2009-04-01','yyyy-mm-dd')),
11    PARTITION t_apr_2009 VALUES LESS THAN (to_date('2009-05-01','yyyy-mm-dd')),
12    PARTITION t_may_2009 VALUES LESS THAN (to_date('2009-06-01','yyyy-mm-dd')),
13    PARTITION t_jun_2009 VALUES LESS THAN (to_date('2009-07-01','yyyy-mm-dd')),
14    PARTITION t_jul_2009 VALUES LESS THAN (to_date('2009-08-01','yyyy-mm-dd')),
15    PARTITION t_aug_2009 VALUES LESS THAN (to_date('2009-09-01','yyyy-mm-dd')),
16    PARTITION t_sep_2009 VALUES LESS THAN (to_date('2009-10-01','yyyy-mm-dd')),
17    PARTITION t_oct_2009 VALUES LESS THAN (to_date('2009-11-01','yyyy-mm-dd')),
18    PARTITION t_nov_2009 VALUES LESS THAN (to_date('2009-12-01','yyyy-mm-dd')),
19    PARTITION t_dec_2009 VALUES LESS THAN (to_date('2010-01-01','yyyy-mm-dd'))
20 );
SQL> INSERT INTO t
2 SELECT rownum, to_date('2009-01-01','yyyy-mm-dd')+rownum/274, mod(rownum,11), rpad('*',100,'*')
3 FROM dual
4 CONNECT BY level <= 100000;
SQL> CREATE INDEX i ON t (d) LOCAL;
SQL> execute dbms_stats.gather_table_stats(user,'T')
-- Mark partition t_dec_2009 to unusable:
SQL> ALTER INDEX i MODIFY PARTITION t_dec_2009 UNUSABLE;
--- Let’s check whether the usable index partition can be used to apply a restriction: BETWEEN
SQL> SELECT count(d)
    FROM t
    WHERE d BETWEEN to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss')
                AND to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss');
SQL> SELECT * FROM table(dbms_xplan.display_cursor(format=>'basic +partition'));
| Id | Operation               | Name | Pstart| Pstop |
|   0 | SELECT STATEMENT        |      |       |       |
|   1 | SORT AGGREGATE         |      |       |       |
|   2 |   PARTITION RANGE SINGLE|      |    12 |    12 |
|   3 |    INDEX RANGE SCAN     | I    |    12 |    12 |
--- Let’s check whether the usable index partition can be used to apply a restriction: OR
SQL> SELECT count(d)
    FROM t
    WHERE
    (d >= to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-01-01 23:59:59','yyyy-mm-dd hh24:mi:ss'))
    or
    (d >= to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-02-02 02:00:00','yyyy-mm-dd hh24:mi:ss'))
SQL> SELECT * FROM table(dbms_xplan.display_cursor(format=>'basic +partition'));
| Id | Operation           | Name | Pstart| Pstop |
|   0 | SELECT STATEMENT    |      |       |       |
|   1 | SORT AGGREGATE     |      |       |       |
|   2 |   PARTITION RANGE OR|      |KEY(OR)|KEY(OR)|
|   3 |    TABLE ACCESS FULL| T    |KEY(OR)|KEY(OR)|
----------------------------------------------------“OR” condition fetch less data comparing to “BETWEEN” still oracle optimizer unable to use indexes in case of “OR”
Regards,
Sachin B.

Hi,
What is your database version????
I ran the same test and optimizer was able to pick the index for both the queries.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL>
SQL> set autotrace traceonly exp
SQL>
SQL>
SQL> SELECT count(d)
2 FROM t
3 WHERE d BETWEEN to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss')
4              AND to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss');
Execution Plan
Plan hash value: 2381380216
| Id | Operation                 | Name | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT          |      |     1 |     8 |    25   (0)| 00:00:01 |       |       |
|   1 | SORT AGGREGATE           |      |     1 |     8 |            |          |       |       |
|   2 |   PARTITION RANGE ITERATOR|      | 8520 | 68160 |    25   (0)| 00:00:01 |     1 |     2 |
|* 3 |    INDEX RANGE SCAN       | I    | 8520 | 68160 |    25   (0)| 00:00:01 |     1 |     2 |
Predicate Information (identified by operation id):
   3 - access("D">=TO_DATE(' 2009-01-01 23:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
              "D"<=TO_DATE(' 2009-02-02 01:00:00', 'syyyy-mm-dd hh24:mi:ss'))
SQL> SELECT count(d)
2 FROM t
3 WHERE
4 (
5 (d >= to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-01-01 23:59:59','yyyy-mm-dd hh24:mi:ss'
6 or
7 (d >= to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-02-02 02:00:00','yyyy-mm-dd hh24:mi:ss'
8 );
Execution Plan
Plan hash value: 3795917108
| Id | Operation                | Name | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT         |      |     1 |     8 |     4   (0)| 00:00:01 |       |       |
|   1 | SORT AGGREGATE          |      |     1 |     8 |            |          |       |       |
|   2 |   CONCATENATION          |      |       |       |            |          |       |       |
|   3 |    PARTITION RANGE SINGLE|      |    13 |   104 |     2   (0)| 00:00:01 |     2 |     2 |
|* 4 |     INDEX RANGE SCAN     | I    |    13 |   104 |     2   (0)| 00:00:01 |     2 |     2 |
|   5 |    PARTITION RANGE SINGLE|      |    13 |   104 |     2   (0)| 00:00:01 |     1 |     1 |
|* 6 |     INDEX RANGE SCAN     | I    |    13 |   104 |     2   (0)| 00:00:01 |     1 |     1 |
Predicate Information (identified by operation id):
   4 - access("D">=TO_DATE(' 2009-02-02 01:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
              "D"<=TO_DATE(' 2009-02-02 02:00:00', 'syyyy-mm-dd hh24:mi:ss'))
   6 - access("D">=TO_DATE(' 2009-01-01 23:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
              "D"<=TO_DATE(' 2009-01-01 23:59:59', 'syyyy-mm-dd hh24:mi:ss'))
       filter(LNNVL("D"<=TO_DATE(' 2009-02-02 02:00:00', 'syyyy-mm-dd hh24:mi:ss')) OR
              LNNVL("D">=TO_DATE(' 2009-02-02 01:00:00', 'syyyy-mm-dd hh24:mi:ss')))
SQL> set autotrace off
SQL>Asif Momen
http://momendba.blogspot.com

Problem with MathType and CS5 due to InDesign

We publish Math and Science curriculum and we run into the problem below.
the second bullets is imported wrong in CS5. Is there a work around? (I also emailed Design Science). We'd rather use CS5 since all our other subjects are done in CS5 and we want to be able to use spanning across columns which does not exist in CS4.
The same happens when using MT Extra instead of Euclid Extra.

BTW, Jongware, I was a bit unfair about the fonts. You can sign up for the 30-day free trial of Mathtype and then you get the fonts. Furthermore, the strong implication is that you need not delete them after the trial period is over, and therefore you also can extract them from the installer for use like this with no compunctions (which is what I did). Source: MathType: Font Installers.
redesign: Moving right along, just like Jongware, when I open your CS4 document in CS4, I see the same behavior Jongware saw and the same behavior you saw in CS5 (which I also see in CS5), namely the goofy circle glyph (seems to be GID 64 and U+F069):
I did have to turn on high-resolution previews, though otherwise I got something else entirely.
I notice, however, that you seem to have authored this file using some 3rd party plugins:
Since that seems to be a math-related plugin, it doesn't seem inconceivable that it is part of the issue.
I suggest you disable it and re-test in CS4.
The font does seem a bit goofy...The goofy circle glyph appears in FontForge, as a ccwcontourcircle, but not in
standard Mac font apps, like TextEdit. It's also the 'i' position in the font.
I don't know enough about fonts to dig and really figure out why you get one character when it is first and another when it is second, but I really don't think this is InDesign. Oh, right, let's look at the EPS file in another program...
Curiously, Preview.app indeed shows the bullet glyph in the first position (and in the second).
Adobe Illustrator, which I opened by accident (ha!), shows ccwcontourcircles.
So it seems that Apple and Adobe's EPS renderers treat this font differently.
I suppose it might be an Adobe bug, but I'm more inclined to suspect its ambiguous... The way the ccwcontourcircle is encoded seems strange to me.
Well, I think that's enough for me. Basically, Jongware and I see consistent behavior with CS4 and CS5 — oh, actually. Are you using CS4 and CS5 on the same machine? Or on different machines? Because...I suspect this is handled by the AGM library, and it may well be that using CS4 on a machine with CS5 makes it use CS5's AGM library. But that might not be true at all, just speculation.
Anyhow, I'm not sure what Jongware's newfound Adobe Support optimism is based on. I suspect you'll hear from Design Science in the next day or two, and maybe from Adobe by September. But perhaps I am too pessimistic on Adobe Support right now.
I suppose making it consistently ccwcountour doesn't help you overmuch though. Hrmm.

My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?

My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?

Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

Bizarre behavior with loadMovie and JPGs

Similar Messages

Maybe you are looking for