Blank space in the report detail section

Hi ,
I have data for ten columns and after that i am getting a blank space, so my report is scrolling to right side without any data.How shall i remove the blank space.Any suggestions.For one more i am getting this only at the second page (Detail section)
Regards,
Rajasekar

Thanks James for the reply,but i am not getting it correctly.
I have a year column which is the last column in my detail section.If i don't get any value for that year column then i am not getting these blank space at the right side of my report.If i have value for the year column then i am getting blank space double the times to my report detail section.
Any suggestions
Regards,
Rajasekar

Similar Messages

Blank Spaces in the report

Hi My Report has some columns which has the option as "Can Grow" so that when the returned value from the database is more that one line it can accomdate the data in the field.The problem i am facing is that when the records are printed in the pages and when the next record is unable to fit in the remaning section of the report it automatically pushes to the next page. In this scenario the previous page has blank space after the next record is printed.Is there way that i can suppress this balnk space and force teh record to be printed in the same page and when the page is over it follows in the next page.Thanks in Advance Moa

My problem was that I wanted to display several lines in a total field: order amount, minimum charge, delivery charge and tax. When any of them was zero, I needed to hide it without leaving a big gap. Here was the solution: Create a textbox. Set the textbox's "Suppress blank lines in embeded fields" property. Instead of using database field (for example, table.fieldValue) and a label, create a formula that says: <blockquote>If isNull{table.fieldValue} then "" else "Value:" + Chr(9) + ToText({table.fieldValue}) </blockquote>I placed a tab in this formula to space it out. Add tab stops (one left-aligned, one decimal) to your textbox, and drag the formula into it (embed) instead of the database field. Add the other fields to the textbox as well, separating fields by adding carriage returns. Bingo. The field and the line will disappear when there is no data. I hope this helps.

Show graphs before the report detail section

Post Author: Dan4sure
CA Forum: Charts and Graphs
I have a report where I have graphs in the report footer and the report details in a subreport. Is the a way to produce the same report without a subreport. I.e. is there a way to show the graphs in the report header or before the detail section?
Thanks, Dan

Post Author: Dan4sure
CA Forum: Charts and Graphs
I figured out what to do by looking into the sample reports. I can place graphs in the report header.
Thanks, Dan

Excel export contains a blank row for the Report Header

Hi,
I am getting a blank row as the first row in my SSRS report when exported to excel. I have already taken care of following things,
1. I have hidden all of the Page Header items using Globals
2. The position of Report Body Tablix is 0, that means there is no space between report header and Report Body.
I have developed this Report in SSRS 2012, please let me know if any more details are required. I think even after hiding Header Items, excel creates a placeholder for page header. I can't remove header from my reports as it is needed to be published in
pdf.
Regards
Mohit

Hi Mohit,
According to your description, you are getting a blank row as the first row in your excel report when you export the report to excel, you have hidden all the items in the Page Header by using the Globals, right?
This blank row is for the page header, although you have hidden all the items in it, but it will still display when export report to excel. Because we can’t hidden the page Header directly. Normally, we can hidden all the items in the page Header, So in
the design phase we can also see the blank area above the report body when preview.
We have an alternative way by add the “SimplePageHeaders” setting in “RSReportserver.config” file, after configuration the page Header will not display in the first row of the worksheet but is rendered to the Excel page header. In Reporting Services, the
“SimplePageHeaders” default value is “FALSE” and it indicates that the page header is rendered to the first row of the worksheet. In order to display the page header in the Header/Footer section of Excel, we need to set the “SimplePageHeaders” setting value
to “TRUE”. I did a test on my local machine and here are my steps:
Navigate to RSReportserver.config file: <drive:> Program Files\Microsoft SQL Server\MSRS10.MSSQLSERVER\Reporting Services\ReportServer\RSReportserver.config.
Backup the RSReportserver.config file before modify it, open the RSReportserver.config file with Notepad format.
Set the Excel rendering extension code like this:
<Render>
<Extension Name="EXCELOPENXML" Type="Microsoft.ReportingServices.Rendering.ExcelOpenXmlRenderer.ExcelOpenXmlRenderer,Microsoft.ReportingServices.ExcelRendering">
<Configuration>
<DeviceInfo>
<SimplePageHeaders>TRUE</SimplePageHeaders>
</DeviceInfo>
</Configuration>
</Extension>
</Render>
4. Save the RSReportserver.config file.
Note: Changing the rendering extension parameters only affects rendering operations on the Report Server.
When I access to Report Manager and export the report(includes a page header) to Excel format, the blank row will disappear now.
Similar thread for your reference:
SimplePageHeader property in SSRS 2008 not working
Removing 2 top blank rows when export to excel in ssrs 2008
r2 report
You can find more detail in these articles about the page header and page footer:
Exporting to Microsoft Excel (Report Builder and SSRS)
If you still have any question, please feel free to ask.
Regards
Vicky Liu

Blank spaces in alv report

hi experts,
i have a requirement that i need to develop a report which is same as t-code cs11,
but in cs11 we are getting the report for a single material and its bom components .
in my require ment i need to develop a report for range of materials, i almost did that but the problem i am facing
is how to obtain a blank space in alv report, after completion of single material and its components r displayed.
can any body pls suggest me.
thanks&regards
maheshlap

hi srihari,
i tried that but the blank lines r appending at the end of internal table.
the following is the table ( t_main ) i am passing to the function module
LOOP AT T_STKO INTO W_STKO.
    W_MAIN-STLNR = W_STKO-STLNR.
    W_MAIN-STLAL = W_STKO-STLAL.
    W_MAIN-STLST = W_STKO-STLST.
    W_MAIN-BMENG = W_STKO-BMENG.
    W_MAIN-BMEIN = W_STKO-BMEIN.
    READ TABLE T_MAST INTO W_MAST WITH KEY STLNR = W_STKO-STLNR .
    W_MAIN-MATNR = W_MAST-MATNR.
    W_MAIN-WERKS = W_MAST-WERKS.
    W_MAIN-STLAN = W_MAST-STLAN.
    READ TABLE T_MAKT INTO W_MAKT WITH KEY MATNR = W_MAST-MATNR .
    W_MAIN-MAKTX = W_MAKT-MAKTX.
    APPEND W_MAIN TO T_MAIN.
    CLEAR W_MAIN.
ENDLOOP.
can u pls send me some sampe code.
thanks.

Hi, my MacBook Pro cannot open Safari. nexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920

Hi, my MacBook Pro cannot open Safari. It crashes and gives the message, ' Safari quit unexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920

Remove "Rapport" by following the instructions on this page.
Back up all data before making any changes.

How do I get rid of the blank space at the bottom of the new Firefox menu?

The new firefox 4 has a different menu system. IT has blank space at the bottom wiht just a plus sign that opens new tabs. I can get that from the + sign by the tabs and don't want it or the rest of the blank space on the bar. I need all the space in the main window I can get. How do I get rid of this?
Found my own answer, disable Conduit Engine toolbar, whatever the heck that is. Why it's enabled to start with is beyond me.

Hi stephanie,
These are unrelated questions/statements.
Space before and space after a paragraph are controled in the Text Inspector, as you've found out.
Pages will create a page break whenever there is no room for another line on the page. That break can come anywhere in a paragraph.
You may be thinking of Widow and Orphan prevention, and the other Pagination controls, found under the More button in the Text Inspector. (If that's what you found, then thanks for the refresher! I hadn't been to that pane for awhile, and had forgotten the variety of pagination controls available.
Regards,
Barry

How to Remove Blank spaces in the text elements for a smartform

Hi All,
Can any one please help me out to remove the blank spaces in the text elements.
We are printing Labels using the Zebra Printer and we have rotated the windows to 90 degrees.
We are able to see out text and barcodes. But the issues is when we are printing the label. We are getting spaces in the Text and in the Text elements fields. I have tried to give &g_name(C)&. But it is not working even i worked with style sheet spaces no luck.
Currently out text and fields are printing like this
s h r i y a n
material number
1111 -001 -000
They should print like
shriyan
1111-001-000
According to the ZEBRA suggestions we are using the font helve.
Plase help us it is very urgent.
Reward point will be given.
Thanks

Hi,
Just use Condense g_name inside the program lines.
Just to see how it behaves put a hard breakpoint.
Break Username. and check the condense statement.
condense <your field> no-gaps.
Create program lines ahead of printing. give the field you want to condense in the input and output parameters of the program lines.
Use condense inside the program lines.
Thanks,
Vamshi.

When I print a Word document to a shared printer, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.

When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines. I have tried to adjust the margins and the page setup settings but to no avail. It used to print fine until recently. Is there a way to fix it so that the printer prints what print preview shows?

I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

How can I fill the blank space in the example below?

I have to fill using sql statement the blank space with the same description that appears below that belong to the same STTCKT. I
am using a temporary table.

There is no need in ROW_NUMBER. You can use simple query like below sample which cost 6% relative to the use of ROW_NUMBER which cost 94% (sort is havy operation with no index).
DDL+DML:
CREATE TABLE test( [STBK#] varchar(50), STTCKT int)
truncate table test
Insert into test values
(null, 48035)
,('First Two Truck', 48035)
,(null, 48039)
,('First Two Truck', 48039)
,(null, 48046)
,('First Two Truck', 48046)
,(null, 48054)
,('KLS LOGISTIC, INC.', 48054)
GO
select * from test
GO
If all you need is SELECT with FILL then check this:
select
--[STBK#] ,
STTCKT, [Fixed_STBK#]
from test T1
Cross APPLY (SELECT TOP 1 T.[STBK#] FROM test T WHERE T.STTCKT = T1.STTCKT and T.STBK# IS NOT NULL) T2 ([Fixed_STBK#])
And you can use this query as well without CROSS APPLY
select
--T1.[STBK#] ,
T1.STTCKT, T2.[Fixed_STBK#]
from test T1
LEFT JOIN (SELECT T.STTCKT,MAX(T.[STBK#]) [Fixed_STBK#] FROM test T GROUP BY T.STTCKT) T2 ON T1.STTCKT = T2.STTCKT
If you are looking for update the original table please check this:
UPDATE test
SET [STBK#] = T2.[Fixed_STBK#]
FROM test T1
Cross APPLY (SELECT TOP 1 T.[STBK#] FROM test T WHERE T.STTCKT = T1.STTCKT and T.[STBK#] IS NOT NULL) T2 ([Fixed_STBK#])
WHERE T1.[STBK#] IS NULL
GO
I hope this is helpful and answer your need, If not please try to clrify your needs and post your DDL+DML
[Personal Site] [Blog] [Facebook]

How do I delete the blank space at the beginning or end of a project?

I constantly end up with blank space at the beginning or end of a project - how do I remove it? I get this ALL the time and I jsut can't get rid of it. Obviously I want my project to start at 0.00 not at 1.xx.
Thanks.

That's not a project. You're inside an multicam angle editor. You need to edit the multicam clip into a project. That's where you edit it.

Change Filenames with blank spaces in the Filename

I want to change many filenames with blank spaces and replace
blank spaces with underbar character.
Example:
File One change to File_One
File Two change to File_Two
Here is my script:
for file in `ls`
do
i=`ls -1 *" "*`
b=`ls -1 *" "* | sed -e s/\ /_/g`
done
mv "$i" $b
Please advise what is wrong with my script that isnt
working. The script works if I only have one filename
with a blank space. But if I have several filenames
with blank spaces in the name then it doesnt work.

I want to change many filenames with blank spaces and replace
blank spaces with underbar character.
Example:
File One change to File_One
File Two change to File_Two
Here is my script:
for file in `ls`
do
i=`ls -1 *" "*`
b=`ls -1 *" "* | sed -e s/\ /_/g`
done
mv "$i" $b
Please advise what is wrong with my script that isnt
working. The script works if I only have one filename
with a blank space. But if I have several filenames
with blank spaces in the name then it doesnt work.

Pages and numbers will not take dictation and iOS 8. Very frustrating screen goes blank no keypad. I have to close the document In order to get rid of the big blank space where the keyboard should ber

Pages and Numbers will not take dictation in iOS 8 on my iPad 4 and iPad mini.
Very frustrating -screen goes blank where keyboard should be when I touch the microphone- no keypad & dictation does not record. I have to close the document In order to get rid of the big blank space where the keyboard should be. When is this going to be fixed?it's making recordkeeping Pages and Numbers, which I use heavily, almost impossible.
also dictation in other locations such as Mail put capitals in the middle of sentences and sometimes don't capitalize first letter in a sentence (see first letter of this sentence!) and other instances like the months of the year or the days of the week. Is anyone else having these problems?

Pages and Numbers will not take dictation in iOS 8 on my iPad 4 and iPad mini.
Very frustrating -screen goes blank where keyboard should be when I touch the microphone- no keypad & dictation does not record. I have to close the document In order to get rid of the big blank space where the keyboard should be. When is this going to be fixed?it's making recordkeeping Pages and Numbers, which I use heavily, almost impossible.
also dictation in other locations such as Mail put capitals in the middle of sentences and sometimes don't capitalize first letter in a sentence (see first letter of this sentence!) and other instances like the months of the year or the days of the week. Is anyone else having these problems?

HT202879 Since opening an existing Pages doc, all the previously centred images and tables are now too far to the rights - leaving a large blank space to the left of each page. Any ideas reducing?

Since opening an existing Pages doc, all the previously centred images and tables are now too far to the rights - leaving a large blank space to the left of each page. Any ideas re fixing this? Problem remains even when I open an earlier version on the previous version of Pages

It has always been that the upgrade tries to be the "master" over the older version.
Anyway in Pages 09 you have probably the Comments field showing, making all contetn to move to the right.
Go to View menu > Hide Comments.

Remove Blank Space from Crystal report

Hello,
i am new in crystal report work.
recently, i have created one crystal report which display item and remaining other detail like tax detail,item grand total, Some extra remark,etc.
But my scenario is that if i take three or more item then it take two page that's ok. on that case i have no problem,
but if i take only single item it will take two pages.
how can i remove unnecessary area.
i attached below image for better understanding.
i also provide crystal report if required.
if there is image not visible then i also attach below.
Plz... Help me ASAP.
Thanks,

It seems like your tax detail section is another sub report please compact the subreport if attached.
Right click on the object and select Format Object > checkbox "Supress Embedded Field Blank Lines"
Right Click on the section and click "Fit Section"

Blank space in the report detail section

Similar Messages

Maybe you are looking for