Blog Loads Slow  and Intermittent Internet Connection for One Site Only

Hi
Yesterday we had a site where the blog lost it's feed, but was restore after a chat with support. Today the blog post are not coming up in the admin. I can see the list, but the not the post as the flywheel keeps spinning and spinning.
When I go online, I can get to the blog fine, but when I click on the pagination links below or try to do a reload, the entire page gets lost or server can not be found.
I have re-uploaded all the Layouts and Templates, but with no change.
Anyone else having this issue, or is there something wrong with this site's blog?
All other pages and features are accessible from the browser and admin, just not the blog.
Thanks, Teejay

Hi Teejay,
If still experiencing troubles with your blogs please provide the following details so we can attempt to replicate on our end.. 
- blog name or url
- steps you are taking (where you are noticing the slowness)
Or if you would rather you could also provide a quick video cast or your experience so we can investigate further.
- http://www.techsmith.com/jing.html
Kind regards,
-Sidney

Similar Messages

  • Firefox stops loading pages and hoses internet connection for all other apps

    Running Firefox 3.6.3; XP sp3; FSecure Client Security 9
    After using Firefox for a while - sometimes a few minutes, sometimes a few hours, it will stop loading pages. If I click on a link, nothing happens. The program still responds to key / mouse input, but refuses to load any new pages. Furthermore, it stops all internet connections from my machine, so that IE and Opera stop working. I think it also stops email, but I am not sure.
    If I quit Firefox, the process is still running and I have to quit it manually from Task Manager. That solves the problem and internet connections are restored.
    I have tried in safe mode, I have tried removing all extensions, I have tried deleting my profile and doing a clean re-install. It's driving me crazy. Any thoughts?

    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Firewalls]] and http://kb.mozillazine.org/Firewalls

  • Why is my macbook pro running so slow and losing internet connection?

    Why is my Macbook Pro downloading so slowly and losing internet connection frequently?

    Write off the MS stuff as indicators for now--starting with Office 2008, they developed very long launch times. The time to launch 2008 on my old 1.25Ghz G4 and my MBP 2.2G are virtually the same. Even document opens/saves are slow compared to Office 2004 and earlier.
    1) You have adequate hard drive space so that eliminates one of the usual suspects.
    2) Check for runaway background processes. Quit all running user applications so the computer is at normal idle. Find Activity Monitor in Applications > Utilities and launch it. If you've not run it before, change the "Show" pulldown at the top of the AM window from its default of "User Processes" to "All Processes." There is a column for "%CPU." Click that column header to sort by CPU usage. Watch the processes "bubble" for about a minute to get a better picture of the usage.
    If any process is using more than about 25 percent of the CPU cycles while the computer is idling, post the names of the processes and we can see if they can be eliminated. My MBP shows nothing using more that about 5 percent on any given test run as long as I close all my user apps.
    3) If you have never done any sort of maintenance procedures, taht can slow you down. Simply restarting the computer a few times a week clear a lot of temporary files. You also may wish to review this article on the Mac OSX periodic maintenance scripts, which, if run, also do a lot of cleanup:
    http://thexlab.com/faqs/maintscripts.html
    There are other useful articles on file maintenance associated with the one. Here's the index:
    http://thexlab.com/faqs/faqs.html
    Check out articles with "Maintain" and "Tuning" in the titles.
    4) Use Disk Utility to check the SMART Status of your hard drive. A failing drive can make things slow before it makes things stop.

  • Losing power/signal and no internet connectivity for WRT54G2-RM

    Just installed router and using Motorola SB5101 cable modem and Comcast.  Followed instructions  and the router has lost losing power and needing restarts a few times.  Have it installed by ethernet cable to my desktop, and using laptop (XP Pro Thinkpad P42).  Cannot get internet connectivity and also loses wireless signal connection.  I know there are a number of similar posted issues, and I am new to this forum.  Any ideas?

    Download and upgrade your router's firmware, reset and then re-configure it...
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link

  • Using Airport Express as internet connection for one Mac and one PC

    Will probably be judged a complete dork for this question. I have successfully set up my Imac G5 to run an internet connection through an Airport express. My partner runs a PC (Windows XP) and I want to connect this too. Have installed a USB wireless card on the PC, and installed Airport Utility, but it just won't find the Airport Express - it will however find the Imac with something like 96% signal strength. So I set up a network on the Mac and have successfully linked into it with the PC, but it soon comes up with a connectivity problem that will not allow internet browsing. So two questions - can I connect two computers to the Airport Express at once for internet browsing, or do I have to do it through linking the PC to a wireless network? If the latter is the route - any ideas on what the connectivity issue will be? Help!

    No, not if the AirPort Express "joins" the wireless network.
    No, I do not want to join a network.
    It is possible to have the AirPort Express "create" a separate wireless network that would not have access to the Internet, but if you did this, you would need to log off of your normal network....(losing your Internet connection) and then log onto the AirPort Express network when you wanted to listen to AirPlay.
    Then, when you wanted to have Internet access, you would have to log off of the AirPort Express network and log back onto your normal wireless network.
    Ok, I understand that it is not possible to use airport express only for sound streaming while having an Internet connection at the same time. Airport express does need to join a network if I want sound streaming next an Internet connection. I wanted airport express not to get into way of my Internet connection because in this case the sound streaming messes up sometimes. When I configure airport express only as a sound output, the problems I encounter fade away but then I cannot access to the Internet. Anyhow thanks a lot for the answer.   

  • Foxfire disappeared from my computer and my internet connection at that site is gone-help

    I tried to open my foxfire internet connection as usual. An error message came up and said: "Unable to connect
    Firefox can't establish a connection to the server at www.msn.com.
    1. The site could be temporarily unavailable or too busy. Try again in a few minutes.
    2. If you are unable to load any pages, check your computer's network connection.
    3. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to
    access the Web.
    I have had Firefox on my computer since I have had it. I have never had this problem before. I checked all the above things. I am contacting you thru Internet Explore which is not my default site. Please help me restore my original Firefox.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • DW Right-justifying the index for one site only

    Dreamweaver has suddenly started showing the directory for one of my sites as right-justified:
    Does anyone know how I can get this back to left-justified?
    Thanks
    Steve

    toonbone23 wrote:
    ...Adobe who know exactly what causes this. Don't they ever visit the forum?.
    Steve
    I'm not sure they do!
    This is a user forum.  I htink if you want an answer to your question, you might like to consder raising a support ticket.  I come here quite a bit, and I have never noticed anyone ever having the same thing happen to them.
    Martin

  • WRT160N and intermittent internet connections (even wired!!!)

    I just purchased and installed the LinkSys WRT160N router to replace an older Netgear wireless 'G' router.
    The reason for the replacement / upgrade was simply to have the wireless signal reach the rest of my house.  We do not have any 'N' receivers/adapters in our devices.
    After installing the router, email works fine, but internet access is spotty.
    Most of the time when I navigate to a new page, I have to "refresh" multiple times.
    My ISP (Comcast) says that everything is fine from their end.
    I have powered off and on my modem, router, PC's, etc. countless times and yet cannot get a consistent connection even when directly wired to the router.
    Before I return this router and try another brand, I thought I'd post a message here to see if there are any suggestions.  I have not upgraded the firmware and am using the router as purchased two days ago.
    I am using Firmware version 2.0.02 and the router is WRT16oNv2.

    I have had the same problem...with the same model (WRT160N) for months now (since I bought it). No Problems on the end of our ISP either. Our problem is ONLY when it is wired. My PC is wired to the router. Xbox 360 used to be wired but problems were solved when we bought an adapter for it. All of our wireless works fine. My husband refused to return it since he had no trouble with his Iphone or laptop. The PC still gets shotty connection. We have talked with tech support at both Linksys and Geek Squad (they set up security options for us) with no avail. They had us try everything and nothing worked. Now my solution is to unplug the router and wire my pc to the modem...hoping he will get irritated enough to buy another router and brand when he has to plug it all back in to use his laptop or Iphone. Sad, we bought this one because we heard it was the best! I guess we should have done more homework on it.
    I got on here today hoping to find new ways to fix this problem that we haven't tried. So far, no luck. I'm starting to think it has nothing to do with some setting changes and it is just a bad piece of equipment.

  • Deluge and KDE - displaying incorrectly for one user only

    My deluge (and possibly other gtk apps) are being displayed incorrectly in KDE.  You can see the screenshot attached, but the thing I mostly notice is the progress bar.  On my laptop, as well as any other user account on the PC in question, it's a very blue progress bar (so 100% torrents will be all blue, 0% no blue, and obviously in between as % increases).  In the past I've messed with various gtk/kde rendering apps (so that gtk apps will display "correctly" in KDE), but I don't currently have any installed.  I also have rm'ed the configs in question per the wiki ( https://wiki.archlinux.org/index.php/Un … plications ).  I have tried removing the deluge config for my current user and it still doesn't "fix" the issue.  I've gone through kde system settings to setting all display options to default-type options (which is what my laptop is set to).
    Just wondering if anyone had any thoughts on where I could look to fix this?  It's mostly an annoyance, but I've been trying to fix it for a while now so thought I'd finally ask for some help.
    EDIT: I realize this should be in the Desktop/Apps sections, so if a mod could move it for me, that would be much appreciated.
    Last edited by vladthedog (2013-12-05 18:08:10)

    1. You said the projects were all saved "to a shared folder." Do you mean THE Shared folder? Your Mac's Users folder should list two Users, plus a folder named "Shared". Is that the folder you mean?
    2. The trouble is that an iMovie project isn't actually a file. It's a special kind of folder called a package, which contains other files and folders. (To look inside the package, Control-Click on the package icon and choose "Show Package Contents" from the popUp menu.)
    3. When YOU are the user and you create a new iMovie project, the package and everything it contains is configured with you as the owner. You are the designated owner of all the items that comprise the project. No one else can Write to the project.
    4. To change that, you have to change the project package into a normal Finder folder, adjust its permissions and the permissions of all the contents of that folder, then change it back into an iMovie package.
    Here's how:
    In the Finder, choose Finder > Preferences. Click Advanced and turn ON "Show all file extensions".
    The name of your iMovie project "My Sample Project" is now displayed as "My Sample Project.iMovieProject" in the Finder.
    Remove ".iMovieProject" from the project name, removing the period. When the Finder asks, say OK.
    The project package has now turned into a folder. Select the folder and choose Get Info.
    Set Others permissions to "Read & Write". Then click "Apply to enclosed items". When the Finder asks, say OK.
    Select the folder name again and add the extension ".iMovieProject" to the name. The folder will change back to an iMovie package.
    The package will now allow anyone to Read and Write to the project.
    Karl
    PS: This solution isn't very handy, obviously, but it does the job. A better solution is to buy an external hard drive, and configure it to Ignore permissions. (In the Get Info window for the disk.) That lets both users save projects to the drive without permission issues.

  • Only in Firefox Ver. 7.0.1, receive error message for one site only " Tired help advice -didn't workAn error occurred while displaying this page"

    The above error message suddenly appeared trying to load Schwab.com. Couldn't get help to solve problem. Uninstalled Firefox and then downloaded fresh version - still doesn't. Note I have McAfee security suite installed. Performed Delete of Firefox and then reinstall - still no help

    Download Microsoft Visual C++ 2005 Redistributable Package (x86) at
    http://www.microsoft.com/downloads/details.aspx?FamilyID=32bc1bee-a3f9-4c13-9c99 -220b62a191ee&DisplayLang=en
    It should fix the sidebyside errors. It did for me.

  • Slow and 'sticking' internet after move to 10.6

    More or less after a recent upgrade from 10.5.x to 10.6.4, I have an intermittently slow and 'stuck' internet connection.
    I connect to the internet via ethernet to a Netgear WGR614v5 router and thence to a Virgin Media cable modem.
    What generally happens now is: open browser; first couple of sites connect fine; third site, Safari's progress bar 'sticks' part way across and the status bar stays on "contacting xxx.com". I then tear out what's left of my hair and have to wait a while before the process starts again.
    Please help!

    hi folks ~ sorry for cross posting but I noticed this thread after the fact..
    I am glad you are having similar issues...
    When behind a NATing firewall (openSuseLinux 11.2 routerfirewall in CLASS C config) and using static-IP, my mac-mini can not access the internet. But when connected directly to the internet cable - it works fine with my ISP's staticIP and DNS options... {it appears to me that the SnowLeopard server seems to not like being a passive HomeLAN IP client... }
    .. I doubt that per se there's a problem with my linux router/firewall...I've been using it reliably for other devices.. could it be SL doing something 'special'?
    ~

  • I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do?

    I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.

    Your warranty includes 90 days of phone support. Contact Apple.

  • My computer is running sluggish and the internet connection runs very slow. what can I do?

    My mac air is running slugiish and my internet connection takes forever to change windows...what can I do?

    If the computer is brand new, it may be reviewing (indexing) all you files for search. This will take a few hours to complete.  Otherwise you likely have a program that is running poorly and slowing your system down.
    Open the Fibder
    Click the Go menu at the top of the screen
    Click on utilities menu item under go
    Open the Activity Monitor
    When Activity monitor opens, there will be a lot of data in the window, to make better sense of it click on the column labeled CPU. This will sort entries by how much of your computer's CPU they use. The lower the number the better.
    Locate any programs using 80% or more of your CPU. They are the likely culprits of your speed issue.
    If the speed issue is only related to surfing the internet, then you more than likely have an issue with WiFi instead. Try moving closer to your wireless router to see if it speeds up.

  • I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

    I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

    Me too!!! It says check your Downloads, but unable to find Downloads...

  • Mac book pro is running very slow and won't connect to the Internet

    Mac book pro is running very slow and won't connect to the Internet. Please help I'm rubbish with computers!

    Mac book pro is running very slow and won't connect to the Internet. Please help I'm rubbish with computers!

Maybe you are looking for