.bmp files do not show as icons in the event library - I am having to convert them to .jpg to achieve a display
Although .bmp files are to some extent supported, I find that on importing them they do not show as icons in the event library. I am having to convernt them to .jpg files to produce this result. Am I doing something wrongly, or is this the experience of others as well?
Yes - I've posted one of the files to Dropbox and it appears perfectly in picture form on my IPad. So it seems there is nothing wrong with the files. I'm even more puzzled now! I'll try to upload a smaller (less than 2mb) file here. The files I am using in the project, which is a kind of family history using stills, are a complete mix of types - tif, jpg, Canon raw(cr2), psd and bmp. Some, including, I suspect, many of the .bmps are scans from old prints, as this one.
Similar Messages
-
I have had my apple tv for 2 years and until I updated it I had no problems. Now it keeps telling me to turn on my home sharing in iTunes which I have done innumerablre times. It won't recognise my macbook pro so I reset my apple tv to original settings and still it won't work. Any ideas??????
Me too I have the same problem as MicheleP57!!!! What can I do???
-
Af:statusIndicator does not show busy icon when a command button is click
Hi Guys,
af:statusIndicator does not show busy icon or motion when a command button is click
I am working on an excel data upload functionality on .jspx page. I use “af:inputFile” file uploader to upload an excel file then process the data and store it as a list of objects in memory and display it in “af:table” table
I added “af:statusIndicator” to the page to show the user that the page is progressing while the data is uploading and when it is saving the data to the database.
In this case, when the “af:inputFile” is clicked to upload the excel file - the status indicator shows a progress icon (movement) which is expected and is good. However, after the data have been display in the table when I click on a command button that saves the data to the database – I expected the status indicator to start its busy motion but that is not happening. Whereas, the command button grayed out and is disable when I clicked the button until the operation is completed.
Is there any way to start the statusIndicator when a command button is clicked?
I tried the following options
*<af:statusIndicator id="si1_uploadStatus" partialTriggers="pc1:cb1 pc1:table"/>*
Where pc1:cb1 is the command button and pc1:table is the table
*<af:commandButton text="Submit Uploads" id="cb1"*
*disabled="#{!viewScope.batchUploadController.allSavable}"*
*partialTriggers="::infFilePath"*
*action="#{viewScope.batchUploadController.saveUploadedData}"*
*blocking="true"/>*
Thanks,Can somebody please address this?
Thanks, -
some music files do not show up in google play music app library. I did clear cache/data and restarted phone. The music is stored on the SD card. Most of the music in the library is in the same folder on the sd card. I can play the song from file manager, but it still is not in the music library in play music.
Cyndi6858, help is here! We'd be happy to help figure this out. Just to be sure though, the Droid Maxx should not have an SD card. Is this the Droid Razr Maxx? How did you add the music to the device? Are you able to see the files and folders located on the SD card or device when plugged in?
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
NEF Files Do Not Show up in Lightroom.
Hello,
I bought a new Nikon D750 yesterday and my raw files do not show up in Adobe Lightroom. The do show up in Photoshop and Bridge. I have creative cloud and it says it is "up to date" Does anyone know how I can get Lightroom to open the files? Thanks. Father Hungry.Install Lightroom CC 2015 via your Adobe Creative Cloud app.
-
I need help from some Apple people. I have an iPod Touch and I wanted to load it up with some fresh music but I currently don't have a PC. I found an app that would allow me to connect to my 2TB network drive directly and I was able to transfer a bunch of music files to the iPod. Unfortunately, these new files do not show under the Music app and I can't seem to find any way to convince the iPod that they are music. I can play them through the file manager only. Android doesn't have this problem, any music I put on my phone is recognized as music and can be played through any of the music apps. Am I missing something or is Apple to inflexible to handle this?
You can't. The only way to get songs in the Music app is to sync from a computer or to download from iTunes.
-
When I do an "edit in" using CS5 and save it, the edited file does not show up in my LR4 preview window.
Message title was edited by: Brett NThere are two distinct modes by which Edit In... may first open an image into PS: as a fully pre-converted rendered file; or as an on-the-fly converted image in memory.
(When LR opens a PS-edited image a second time into PS, using "Edit Original", the former option is always used.)
In the latter case, it is ACR which does this on-the-fly conversion, working from the original image (as imported into LR) plus your subsequent LR adjustment metadata. This means ACR compatibility with LR becomes an issue - as it is not, with the pre-rendered file option.
There is a useful clue to which mode is being used:
the title of the PS document window, in the case of the on-the-fly conversion, still shows the name of the Raw file (or whatever) that you started with in LR... no file has been saved as yet, to say any different. You can Save or Save as, wherever and under whatever name, and from now on LR will look there for your edited image. Or if you close unsaved, LR has no edited image to show at all.
the title of the PS document window in the pre-rendered case, is the name of a file already saved on disk and already showing in LR. If you then saved this elsewhere, you would merely make a duplicate which LR cannot know about - and if this duplicate is the one which contains your PS work, LR will accordingly not show that. It is busy showing the content of the specific file that was passed to PS.
So, if inside CS5 your document is called something like IMG23334.dng - you can save it wherever you like. If inside CS5 your document is called something like IMG23334-edit.tif - you will have to save your changes back to that exact same file, in order for them to be seen in LR. -
Rendered html pages in results file(html) not showing the images of origina
hi,
rendered html pages in results file(html) not showing the images of original page
when i click on rendered html pages of different html section of a results file.
both master and tested as well.
thx
pasumarthiBy design, the report will not show the images, will not apply imported css or javascript files and will not show framesets. Also, in the case that an image is shown there is no guarantee that that was the image that was seen when recording/playback the script.
The rendered html pages that are shown in the report only contains the structure of the html page. If an image is shown the image will be a reference to the location of the image and not a saved copy of the image as part of the report. If the website has a simple structure this can give an idea of what was different. If the website relies extensively on images, stylesheets or javascript to present the information then this report feature becomes less useful.
Few weeks ago I requested a feature request in order to be able to see in the report the page exactly as it was when recording the script and exactly as it was when the script was played back. In the way that the feature request was written it specifies the use of screen captures or saving the page as a pdf file.
Regards,
Zuriel -
HT4060 Ipad2 not showing changing icon
My iPads is not showing charging icon on right hand side at top when plug into mains charger.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
Cheers, Tom -
Outlook 2013 not showing attachment icon even tho there is one.
This quite a weird bug. Outlook 2013 is not showing any icons regarding attachments however there is an attachment!
Why is this happening? Any idea?
Best regards,
Aleksei.Hi Aleksei,
This might has something to do with your current view setting to your folders. Please check if
Attachment has been added into "Show these columns in this folder" list in
Show Columns dialog:
Select the mail folder
Go to View tab on the ribbon
Go to View Settings>Columns...
Select Attachment from Available columns: list, then click
Add-> button.
Hope this helps.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Unfortunately, Attachment option is already selected and if I scroll down I see the icon on different emails. -
Our illustrator files are not showing up when uploaded to creative cloud.
Our illustrator files are not showing up when uploaded to creative cloud. They are visible sometimes when we turn on and off the layers. Please help thanks.
If you feel that you have enough evidence of the symptoms, use the feedback at http://www.apple.com/feedback/itunesapp.html to let Apple know. The "feedback type" of "bug report" has been removed from the iTunes feedback, so I suggest you use use "Other".
You will not receive any feedback from them, but they do read the submissions and act upon them. It can take a while, and more than one iTunes update before the issue is resolved. -
As per attached wireless design I have two outdoor access points connected to cisco 5508 controller, everything is working fine only problem is that when I connected iPhone 4,5 and 6 it's showing connected and working! only not showing wireless icon on top of screen (see the attached icon), but when I connected to Android like Samsung it's showing connected and showing icon as well top of screen.
Advanced thanks and highly appreciateI have an iPhone 4, 5 & 6 and when successfully connected to the controller all does have the wireless icon on the top left. I don't think they are connected to the wireless... Might be associated, but not authenticated. Look at the client on the controller and see if they are in the policy state: RUN If they are not in the RUN state, then they are not connected.
-Scott -
How open a file and not showing window?
I write a script to do some work automatic,
for Indesign script, its application open method could open a file and not showing window,
the open method has a parameter [ShowingWindow] (if true, show the document window).
That is good a feature for me.
But with Illustrator, the application open method hasn't the same feature.
Open
(files as String,
[documentColorSpace as AiDocumentColorSpace],
[options as Object])
and for OpenOptions properties, there is not useful information for me.
Is there any other methods could do that?
Any help is greatly appreciated.Thank for your reply.
-
Video calls are not secure - not showing lock icon
Hi guys,
Calls between 9971/8945. Video calls are not getting secured.
video calls are not secure - not showing lock icon.
However audio calls are secure
CUCM Version : 8.6.2.22900-9
1 pub and 2 sub
Secured cluster : mixed mode
9971 : sip9971.9-3-1-33 - running version - same issue
9971 : sip9971.9-2-4-19 - old version - same issue
8945 : sccp8941-8945.9-3-2-11 – Running version.
Please suggest.
thx
AshishWould you be able to try 9.3(2) firmware or later? I checked with 9.4(1) and I see a lock icon when placing a video call on my 9971. According to the new and changed information 9.3(2) added additional support for when to display the lock icon,
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/9971_9951_8961/firmware/932/release_notes/P567_BK_RD4ECA70_00_rn-9_3_2-8961-9951-9971_chapter_00.html#P567_RF_AB412E9F_00. -
Par file does not show up in iView
Hi,
I created a small project and exported as PAR file via system admin -> support -> admin console -> portal runtime -> upload .
The file is loaded into the server but when I go to create a iView based on this PAR file my PAR file does not show up as an available option. Am i doing something wrong or missing a step?
thanks
Salimhttps://www.sdn.sap.com/irj/sdn/collaboration
Please find the new link.
Thanks
Subramanya
Maybe you are looking for
-
Is it possible to put the results from a query in a variable to use in the bean class?
Hello, I'm using JDeveloper 12.1.2.0.0 I would like to keep the result of my queries (the method i created in the AppModule) in a RichTable or other type of variable so i can have the results stored and i don't have to do unnecessary queries after. I
-
ClassCastException: weblogic.jdbc.rmi.SerialPreparedStatement
I am attempting to retrieve CLOBs and XMLTypes in a servelet from a 9i release 2 database. Using sampe code from oracle, I am getting ClassCastException when I attempt to cast ... oracle.jdbc.OraclePreparedStatement stmt = (oracle.jdbc.OraclePrepared
-
How does the scrollbar know which field it lands on?
Hi all I'm looking at components at the moment. Not how to use them but how to create them yourself to increase your workflow. When dragging a scroll component on to a dynamic textfield it automatically determines which field it land on, and populate
-
Get rid of bottom border Excel
Hello, I am using the Report Generation Toolkit to make an excel file display a table. I want the cell borders in the table, except for one cell. With this particular cell I want to get rid of the top border. The border function in the toolkit only l
-
Collect reports into a book header
Hey! I'm willing to create a header having some text and images for each page on a book collecting some reports I've done in Financial Reporting. Is there any way to do it from planning?? as when i add header in FR I'm not seeing all the images displ