Boolean into array

Hi,
I am using entire port 11 and partially port 10 (10.7, 10.6) for 10 lines from NI PCI-6509 card. Since all these 10 lines can either be high or low, at the output of my DAQ Assistant, my data is represented in boolean, where I want to have all 10 boolean put together into array (orange) or double (orange as well). I don't know what do I need for the input of "Index Array", which is the place where those 10 lines will be connected.
So my question is what should I use to convert boolean into something that is input of Index Array.
Thanks

It should look this. With this technique, the array of products have to match the index. For example, if the digital read returns numeric 14, then item 14 in the array should be that product name. For your combo box, the numbers do not have to be in order and they do not have to be sequential. For example, if 14 is the value returned by the Top Cap CCA, then select the combo box>Edit items and make the Value 14. The array constant you have, make item 14 in the array equal to Top Cap CCA.
Attachments:
Boolean Array to Number.PNG ‏11 KB

Similar Messages

  • How to get the record set into array?

    Hi,
    I want to get the record set into array in the procedure and do the processing of the array later in procedure.
    below is the stored procedure i am working on:
    procedure bulk_delete_group(p_group_id in Array_GroupListID) as
    begin
    for i in p_group_id.first..p_group_id.last loop
    --Here I have to get the list of user id before deleting group
    SELECT user_id into *<SOME ARRAY>* FROM group_members WHERE group_id = p_group_id(i);
    DELETE group WHERE group_id = p_group_id(i);
    --Process the user id array after group deletion..
    end loop;
    end bulk_delete_group;
    Thanks in advance
    Aditya

    Something like this ->
    satyaki>
    satyaki>select * from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
    PL/SQL Release 10.2.0.3.0 - Production
    CORE    10.2.0.3.0      Production
    TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    Elapsed: 00:00:00.20
    satyaki>
    satyaki>
    satyaki>select * from emp;
         EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
          9999 SATYAKI    SLS             7698 02-NOV-08      55000       3455         10
          7777 SOURAV     SLS                  14-SEP-08      45000       3400         10
          7521 WARD       SALESMAN        7698 22-FEB-81       1250        500         30
          7566 JONES      MANAGER         7839 02-APR-81       2975                    20
          7654 MARTIN     SALESMAN        7698 28-SEP-81       1250       1400         30
          7698 BLAKE      MANAGER         7839 01-MAY-81       2850                    30
          7782 CLARK      MANAGER         7839 09-JUN-81       4450                    10
          7788 SCOTT      ANALYST         7566 19-APR-87       3000                    20
          7839 KING       PRESIDENT            17-NOV-81       7000                    10
          7844 TURNER     SALESMAN        7698 08-SEP-81       1500          0         30
          7876 ADAMS      CLERK           7788 23-MAY-87       1100                    20
         EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
          7900 JAMES      CLERK           7698 03-DEC-81        950                    30
          7902 FORD       ANALYST         7566 03-DEC-81       3000                    20
    13 rows selected.
    Elapsed: 00:00:02.37
    satyaki>
    satyaki>create type np is table of number;
      2  /
    Type created.
    Elapsed: 00:00:03.32
    satyaki>
    satyaki>Create or Replace Procedure myProc(myArray np)
      2  is
      3    i   number(10);  
      4    rec emp%rowtype;  
      5  Begin  
      6    for i in 1..myArray.count
      7    loop  
      8      select *  
      9      into rec 
    10      from emp 
    11      where empno = myArray(i); 
    12     
    13      dbms_output.put_line('Employee No:'||rec.empno||' Name:'||rec.ename); 
    14    end loop; 
    15  End myProc;
    16  /
    Procedure created.
    Elapsed: 00:00:00.88
    satyaki>
    satyaki>
    satyaki>declare
      2    v np:=np(9999,7777);  
      3  begin  
      4    myProc(v);  
      5  end;
      6  /
    Employee No:9999 Name:SATYAKI
    Employee No:7777 Name:SOURAV
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:00.30
    satyaki>Regards.
    Satyaki De.

  • Splitting and type casting huge string into arrays

    Hello,
    I'm developing an application which is supposed to read measurement files. Files contain I16 and SGL data which is type casted into string. I16 data is data from analog input and SGL is from CAN-bus data in channel form. CAN and analog data is recorded using same scan rate.
    For example, if we have 6 analog channels and 2 CAN channels string will be (A represents analog and C represents CAN):
    A1 A2 A3 A4 A5 A6 C1 C2 A1 A2 A3 A4 A5 A6 C1 C2 A1 A2 .... and so on
    Anyway, I have problems reading this data fast enough into arrays. Most obvious solution to me was to use shift registers and split string in for loop. I created a for loop with two inner for loops. Number of scans to read from string is wired to N terminal of the outermost loop. Shift register is initialized with string read from file.
    First of the inner loops reads analog input data. Number of analog channels is wired to its N terminal. It's using split string to read 2 bytes at a time and then type casts data to I16. Rest of the string is wired to shift register. When every I16 channel from scan is read, rest of the string is passed to shift register of the second for loop.
    Second loop is for reading CAN channels. It's similar to first loop except data is read 4 bytes at a time and type casted to SGL. When every CAN channel from scan is read, rest of the string is passed to shift register of the outermost loop. Outputs of type cast functions are tunneled out of loops to produce 2D arrays.
    This way reading about 500 KB of data can take for example tens of seconds depending on PC and number of channels. That's way too long as we want to read several megabytes at a time.
    I created also an example with one inner loop and all data is type casted to I16. That is extremely fast when compared to two inner loops!
    Then I also made a test with two inner loops where I replaced shift register and split string with string subset. That's also faster than two inner loops + shift register, but still not fast enough. Any improvement ideas are highly appreciated. Shift register example attached (LV 7.1)
    Thanks in advance,
    Jakke Palonen
    Attachments:
    String to I16 and SGL arrays.vi ‏39 KB

    OK, there is clearly room for improvement. I did some timing and my two above suggestions are already about 100x faster than yours. A few teeaks led to a version that is now over 500x faster than the original code.
    A few timings on my rather slow computer (1GHz PIII Laptop) are shown on the front panel. For example with 10000 scans (~160kB data as 6+2) my new fastest version (Reshape II) takes 14 ms versus the original 7200ms! It can do 100000 scans (1.6MB data) in under 200 ms and 1000000 scans (15MB data) in under 2 seconds.
    I am sure the code could be further improved. I recommend the Reshape II algoritm. It is fastest and can deal with variable channel counts. Modify as needed.
    Attached is a LabVIEW 7.1 version of the benchmarking code, containing all algorithms. I have verified that all algorithms produce the same result (with the limitation that the cluster version only works for 6*I16+2*SGL data, of course). Remember that the reshape function is extremely efficient, because it does not move the data in memory. I have some ideas for further improvements, but this should get you going.
    Message Edited by altenbach on 08-05-2005 03:06 PM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    StringI16SGLCastingTimer.png ‏48 KB
    StringtoI16andSGLArraysMODTimer.vi ‏120 KB

  • How to record sound into array using DAQ ?

    Hi to everyone
    Im last year student , im using LABVIEW for the first time.
    i have an myDAQ , i need to record audio go through the analog ports/AUDIO INPUT of the myDAQ, into array, for later singal proccesing.
    its for my final project.

    First, Learn to use LabVIEW with myDAQ is a series of videos.  To quote the Introduction,
    The Learn to LabVIEW with MyDAQ provides fundamental LabVIEW knowledge for a great out of the box experience with your MyDAQ. Each unit provides a set of videos to allow you to learn at your own pace and review material an unlimited number of times. As well, most videos are accompanied by minor exercises which will help drive home important topics and challenge you along the way.
    View the videos, do the exercises, and I suspect many of your questions will be answered.  If you write some LabVIEW code and have a problem, come back, show us your code, and explain the problem.
    Bob Schor

  • How to put data from database into array

    I need to answer hot to put data from database directly into array.
    I tried like the code below but the error message said: java.lang.ArrayIndexOutOfBoundsException: 0, and it points to this line: numbers [row][0]= rs.getString("ID");
    Hope you can help.
    ResultSet rs = stmt.executeQuery(query);
         int row=0;
         String [] [] numbers=new String [row][10];
         // output resultset
         while ( rs.next() )
              numbers [row][0]= rs.getString("ID");
              numbers [row][1]= rs.getString("name");
         row++;
         // close resultset
         rs.close();
    thanks,Devi

    The exception is been thrown simply because you assigned '0' to the 'row' variable, indicating a zero length of the array. In fact you should assign the row count to it.
    After all, don't do that. Make use of the Collection framework and map the ResultSet to a Collection of DTO's.
    List<User> users = new ArrayList<User>();
    while (resultSet.next()) {
        User user = new User();
        user.setID(resultSet.getString("ID"));
        user.setName(resultSet.getString("name"));
        users.add(user);
    }

  • Insert element into array problem

    Hi,
    I have problem about how to insert value into an array. here is one section, could anyone help me to insert input value into array and delete the first value in the array. Gap means to fill in code
    void Ins(String name)
    // Insert name or increment its multiplicity.
    // If the bag is full remove the oldest entry.
    int i; // Running index on BagName
    int target; // if target < n then name.equals(BagName[target]);
    // else target == n
    Date EntryDate; // Current date and time
    // Get current date and time
    EntryDate = new Date();
    BagDate[n] = EntryDate.toString();
    Mult[n] = n+1;
    BagName[n] = name;
    n++;
    // Search bag for name
    // Gap 2
    // Assertion: target < n => name.equals(BagName[target])
    // else target == n
    // Update Mult if target < n
    // Gap 3
    // Make room for and insert name if target not found
    } // Ins(String name)
    Message was edited by:
    sibojava
    Message was edited by:
    sibojava

    Do you have several accounts?
    See this thread, it's the same question:
    http://forum.java.sun.com/thread.jspa?threadID=5143232
    Kaj

  • XML going into Arrays is killing my movie

    I'm loading a large xml file into flash.
    I think the amount of data going into Arrays is killing my
    move. So what are the work arounds?

    If the built-in XML parser is getting bogged because there is
    too much to
    handle, you ought to try loading smaller chunks of data.
    "mcshaw" <[email protected]> wrote in
    message
    news:e7ueac$md0$[email protected]..
    > I'm loading a large xml file into flash.
    > I think the amount of data going into Arrays is killing
    my move. So what
    are the work arounds?

  • Sorting numbers based on value into arrays

    Hi ...
    I currently have a large list of numbers inside an array.. say from 0 to 400 000. They appear in order, but are unevenly spaced.
    Now I'd like to sort these numbers into arrays.
    I want to say: Put all numbers from 0 to 10 into newArray[0]. Put all numbers from 10 to 35 into newArray[1] ....
    In the end I need a two - dimensional array with numbers. Is this possible in LabView ? Can it be done in acceptable speed ?
    Thank you for your help   

    While I haven't figured out a way to do this efficiently, the attached
    shows a method of doing it number by number.  Perhaps the most
    efficient may be to insert Matlab code and use a sort function, or
    equivalent in c.
    To use this to sort multiple numbers, put inside a for loop and build up an array. (also see attached).
    Message Edited by Robert.Bedford on 09-19-2005 08:53 AM
    Attachments:
    single_number_sort.vi ‏18 KB
    array_sort.vi ‏21 KB

  • Insert into array function

    Hello,
    How can I add an element to a specific location of an array (row 3 and column 4 for example)?  I can only wire one index input into Insert Into Array function.  
    Thanks 

    If you're trying to replace an existing element, then you should use Replace Array Subset, not Insert Into Array.
    You cannot insert a single element into a 2-D array, because LabVIEW doesn't know how to shift the rest of the array to account for the gap that would appear if you were to do that. If you actually want to insert (and not replace), into a 2D array, then you need to insert an entire row or column, not a single element.

  • How to convert a waveform signal into array of complex numbers

    How to convert a waveform signal into array of complex numbers.

    Hi Chaks,
    try this:
    (Get Waveform components, convert to complex DBL)
    Message Edited by GerdW on 01-28-2008 09:23 AM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    ToCDB.png ‏1 KB

  • How to convert arraylist into array

    how to convert arraylist into array?

    If you are using generics, I would use this version of toArray:
    List < X > list = ...
    X[] array = list.toArray(new X[list.size()]);If you are not using generics, that same thing looks like:
    List  list = ...
    X[] array = (X[]) list.toArray(new X[list.size()]);

  • Saving System.out text into array of Strings

    I've got a lot of strings, which are being inputed into System.out
    Is it possible to transfer symbols from System.out into array of strings?

    Do you mean in real time or after the fact parsing it?
    For a realtime solution you may want to look at creating a class that extends PrintStream, which rather than actually printing anywhere, creates this Array that you want. Then call System.setOut(PrintStream s) and give it your special PrintStream. Provide some methods to get at the Array data and you're off!

  • How to get formatted text into arrays

    Dear experts and helpers,
    For my project I import an RTF file and then read the data from it into 3 arrays. This works fine when just using the string contents of the paragraphs. However, the final script should be able to read and replace formatted text...
    Why use the intermediate arrays? Because otherwise I need to switch back and forth between two fm-documents (and one may be a book component).
    The imported file starts with a number of lines separated into two items by a TAB (» denotes a TAB, in FM \x08)
    [[Garneau, 1990 #12]]    »   [9]
    The right item may also be locally formatted text, e.g. [9]
    Then follow the same (or smaller) number of paragraphs with formatted text like this:
    [9] » D. Garneau, Ed., National Language Support Reference Manual (National language Information Design Guide. Toronto, CDN: IBM National Language Technical Centre, 1990.
    Is it possible to replace in the body of the function below the following piece
      while(pgf.ObjectValid()) {
        pgfText = GetText (pgf, newDoc);
        gaBibliography.push(pgfText);
        pgf = pgf.NextPgfInFlow;
    with this
      while(pgf.ObjectValid()) {
        gaBibliography.push(pgf);
        pgf = pgf.NextPgfInFlow;
    Do I need a special declaration of the array gaBibliography ?
    And how to get the right part of the intro lines as formatted thingy into array gaFmtCitsFmt ?
    Currently I read into arrays only the 'strings' (function GetText not shown):
    var gaFmtCitsRaw  = [];                           // left column in processed RTF
    var gaFmtCitsFmt  = [];                           // right column in processed RTF
    var gaBibliography= [];                           // bibliography lines from processed RTF
    // filename is something like E:\_DDDprojects\FM+EN-escript\FM-testfiles\BibFM-collected-IEEE.rtf
    function ReadFileRTF (fileName) {
      var nCits=0, nBib = 0, openParams, openReturnParams, newDoc, pgf, pgfText ;
      var TAB = String.fromCharCode(8);               // FM has wrong ASCI for TAB
      var parts = [];
      openParams = GetOpenDefaultParams();
      openReturnParams =  new PropVals(); 
      newDoc = Open (fileName, openParams, openReturnParams); 
      pgf = newDoc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;  // get first pgf in flow
    // --- read the temp/formatted citations 
      while(pgf.ObjectValid()) {
        pgfText = GetText (pgf, newDoc);
        if (pgfText.substring (0,2) == "[[") {        // citation lines start with [[
          parts = pgfText.split(TAB);                 // get the two parts of the line
          gaFmtCitsRaw.push (parts[0]);               // Push the result onto the global array
          gaFmtCitsFmt.push (parts[1]);
          pgf = pgf.NextPgfInFlow;
        } else { break }
    // --- read the bibliography
      while(pgf.ObjectValid()) {                      // until end of doc
        pgfText = GetText (pgf, newDoc);
        gaBibliography.push(pgfText);
        pgf = pgf.NextPgfInFlow;
      newDoc.Close (Constants.FF_CLOSE_MODIFIED);
    } // --- end ReadFileRTF
    The next questions then will be how to modify Ian Proudfoot's FindAndReplace script to handle formatted text as replacement. IMHO i will need to use copy/paste ...

    Klaus,
    Working with text is about the most complicated thing to do within FrameMaker. It seems counter-intuitive, since it is about the easiest thing to do with the GUI. But alas, once you remove the ability to select with a mouse and type with a keyboard, text becomes a wild jungle of complexity.
    Text ranges are not too bad, once you get the general idea. It is just that... a range of text, like something you would select with a mouse. Like a mouse selection, it starts before some character in some paragraph and ends after some character in some paragraph. It may be the same paragraph, which is a selection within a paragraph. The character can even be the same, which is then just an insertion point (cursor) somewhere.
    So, a text range is a data structure that defines two paragraphs and two characters. In the jargon of scripting, the character is called an "offset." An offset is simply the number of characters past the beginning of said paragraph, where 0 is the beginning.
    For example, if you want to capture the first five characters of a paragraph as a text range, you can do this, where 'pgf' is some paragraph object:
    var textRange = new TextRange();
    textRange.beg.obj = pgf;
    textRange.beg.offset = 0;
    textRange.end.obj = pgf;
    textRange.end.offset = 5;
    If you want to capture a whole paragraph, change that last line to the number of characters in the pgf, or you can do this:
    textRange.end.offset = Constants.FV_OBJ_END_OFFSET;
    ...where that constant is just some built-in thing that means "get me to the end of whatever." It's a convenience of the interface.
    I'll also note that a text range is actually just an array of two text location structures, one named 'beg' and one named 'end.' If you think of a text location as defined by paragraph and an offset from the first character, maybe that will make more sense.
    Text item structures are a whole new mess of complexity. I can't possibly go into an explanation of them here.
    I think that many ES developers (definitely myself included) still use the FDK documentation because it is considerably more comprehensive. The two interfaces are largely parallel, but of course somewhat different in the language syntax. Consider that as a potential resource.
    Russ

  • How can i load or put an image into array of pixels?

    i am doing my undergraduate project , i am using java , mainly the project works in image manipulating or it is image relevant , few days ago i stucked in a little problem , my problem is that i want to put an image scanned from scanner into array or anything ( that makes me reach my goal which is go to specific locations in the image to gather the pixel colour on that location ) , for my project that's so critical to complete the job so , now am trying buffered image but i think it will be significant if i find another way to help , even it isn't in java i heared that matlab has such tools & libraries to help
    thanks .....
    looking forward to hearing from you guys
    Note : My project is java based .

    Check out the PixelGrabber class: http://java.sun.com/j2se/1.5.0/docs/api/java/awt/image/PixelGrabber.html
    It's pretty simple to get an array of Color objects - or you could just leave it as an int array - though it can be somewhat slow.
    //img - Your img
    int[] pix=new int[img.getWidth(null)*img.getHeight(null)];
    PixelGrabber grab=new PixelGrabber(img,0,0,img.getWidth(null),img.getHeight(null),pix,0,img.getWidth(null));
    grab.grabPixels();  //Blocks, you could use startGrabbing() for asynchronous stuff
    Color[] colors=new Color[pix.length];
    for(int in1=0;in1<colors.length;in1++){
    colors[in1]=new Color(pix[in1],true);  //Use false to ignore Alpha channel
    }//for
    //Colors now contains a Color object for every pixel in the image//Mind you, I haven't compiled this so there could be errors; but I've used essentially the same code many times with few difficulties.

  • Prompt input into Array

    Before I begin, I'm saying sorry again to everyone I have offended. But I need your help for this one.
    I just need to understand this:
    Prompting user to input integers into a set of array; let's say
    int number[] = new num[5];I'm going to do something like this But stuck.
    String num[] = JOptionPane.showInputDialog( "Please enter the number:");I'm stuck however we input numbers into array. i've read the textbook but all the examples were just numbers already in the array. Not the inputting part.
    Can you say something?

    Here's my update. I am missing the String?
    import javax.swing.JOptionPane;
    public class GetArray {
    public static void main (String[] args) {
    int[] number = new int[5];
    for(int i=0;i<number.length;i++)
    number=Integer.parseInt(JOptionPane.showInputDialog( "Please enter the number:"));
    JOptionPane.showMessageDialog(null, " The numbers are: " + number[i], " Answer ", JOptionPane.PLAIN_MESSAGE );
    Error I'm getting from this is:cannot find symbol variable i
    for line
    JOptionPane.showMessageDialog(null, " The numbers are: " + number[i], " Answer ", JOptionPane.PLAIN_MESSAGE );
    Please can anyone solve this?
    Thank you,
    C.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

Maybe you are looking for