Border for image
Hi Experts,
I need to set borders and shades for images. I have used the border property . But by default it is black in color.I want to change the border
color and want shades for images.
How to achieve this?
hi,
Thanks for your reply.
What you said is to customize the WDA theme.
Already i have customized the themes using Theme editor tool.
Image ui element is not available in the theme editor tool. so i can't do any changes regarding image UI element.I want to upload round edged images to have a rich look and feel.Also i want to give shades and borders to enrich the look of images.
Any of your suggestions are most welcome.
With hope,
Ramanan
Similar Messages
-
How to add a border around images posted to Facebook?
I am using LR 4.1, also usis PS CS5.
Anyone who uses Facebook to showcase image galleries knows that Facebook changes how images are displayed from time to time. One month it will be on a black background and the next on a white background. And then they put overlay's on top of your images and they change things around whenever they wish. There is not rock solid consistency from Facebook on how they display your images across devices or over time.
What I am trying to do is to add some consistency to how my images are displayed by adding my own border to my images. I need some ideas on how to best do this. The way that I have been doing it does not appear to be ideal and I think someone must have a better way.
Ideally, I would want Lightroom to add a border for me based on some setting under the export manager. But as far I know there is no setting to do this? (Why doesn't lightroom have any border options anywhere yet for anything it exports? This would be relatively simple I think.)
Here is the only way I know how to solve my issue.
First, my other considerations:
I want to keep my original images in my catalog in tact and as is w/o a border and with layers if it is a .psd file. I do NOT want to destructively add a border to the catalog images, only the images that end up on Facebook. I also want to add my watermark image to the final image so that it is done as the last step so that the bottom part of my watermark shows my web site address over the white border on the bottom of the image. Using a droplet and the watermark in the same step does not work properly because it applies the watermark before it runs the action, not after.
I have created an action to add a x pixel white border by:
Merging (flatten) all layers
Creating a new unlocked background "image" layer
Expanding the canvas by x pixels.
Creating a new white filled layer and moving it to the bottom of the layer's pallet.
Adding a 2 pixel black inside stroke to my image layer and adding a drop shadow.
I created a droplet from this action and put it in the droplet folder for LR.
Now for the repeated steps that I am going through...
Select the images that I want to write to Facebook.
Export these images to a new folder using the droplet.
Import the folder of all of these images back into Lightroom.
Move the new images with borders on them into the correct LR FB publish service.
Publish the photos using the sharpening and watermark settings.
Delete the .psd files created in Step #2
The steps that I would like to avoid are #2, #3, #6
Or maybe I am going about this all wrong? Anybody have any better ideas?You may find it much easier to use the Migrify plug-in from Tim Armes/Photographers Toolbox which does what you want from within Lr.
-
hi there,
i have a main flash movie (main.fla) which has images placed
on the screen.
Each image has an invisible button placed on it.. (ie: the
button has only
the hitarea defined and no rollover, down etc.)
NOTE: that the images are different in sizes. hence they have
different
width and height.
I tried making a movieclip of 200 x 200 in size with a 1px
border around it
and dynamically making it adjust to the width and height of
the images. BUT
i seem to be hacing the following problem-
1) for images that are larger in size than the border
movieclip.. the border
tends to thicken.
2) for images that are smaller than the border movieclip..
the border tends
to get more thinner
Required-
OnRollover of an image.. it should have a border around it,
inorder to
highlite the selected image. Lets say, a 1px border and red
in color. How do
i achieve this?
Would really appreciate if someone would provide a simple
code to achieve
this as i am not used to programming.
Please help..
thanxyep, thats cause when you stretch your mc the lines will
stretch with it.
if you are using flash 8, use the 9slice guides.
for the mc that contains your border go into the preferances,
and you will find a check box for the 9slice thingy (technical
term)
check that, then double click on the library symbel to edit
it.
you will find flash has drawn four dashed lines.
move these so that they mark the inward edge of your borders.
basically the area inside these guides stretches normally
the corners don't stretch
and the edges stretch either horizonally or vertically
for more info look in the help.
oh, and don't transform (rotate skew etc) your mc once on the
stage or you'll loose your slices...
best -
What the heck is it with a blue border around image links in
CS3???? I discovered I can get rid of it by setting the border to 0
in properties but what a pain. I also noticed tables have a 1
border by default. I'm sure there is a place to change the default
but I can't find it.
Any suggestions?
thanks,
CJOn Fri, 1 Jun 2007 13:11:16 +0000 (UTC), "SeaJaye"
<[email protected]> wrote:
>Win,
>I like the way you think. For those of us who are cake
baking challenged, could you put up a recipe for said cake?
>thanks,
>cj
Sure. This set of stuff:
*zeroes out the margins and paddings
* guarantees a vertical scrollbar (so no jumping between
short and
long pages)
* establishes colours and fonts etc. for the tags I tend to
use
* gives me a way to float images left or right
* defines a tag that I can use to clear floats (the hr tag,
in this
case, since I never use an hr as a visual element: I always
define
borders when I need them)
* styles the form and form elements
I customize these to suit.
/* CSS Document */
margin: 0;
padding: 0;
html {
height: 100%;
margin: 0;
padding: 0;
body {
min-height: 101%;
font: 100.01%/130% "Trebuchet MS", Verdana, Helvetica,
sans-serif;
color: #000;
background: #4f865b url(../images/bgTexture.png) repeat;
margin: 0;
padding: 0;
hr {
height: 0;
line-height: 0.0;
font-size: 0;
margin: 0;
padding: 0;
clear: both;
visibility: hidden;
h1, h2, h3 {
font-size: 150%;
color: #4f865b;
margin: 20px;
font-weight: bold;
h2 {
font-size: 120%;
color: #cc6600;
h3 {
font-size: 100%;
color: #4f865b;
font-style: italic;
p {
font-size: 90%;
margin: 10px 20px;
ul {
margin: 10px 20px 10px 40px;
font-size: 90%;
a:link {
color: #cc6600;
a:visited {
color: #4f865b;
a:hover, a:active, a:focus {
color: #7dd08f;
.imgLeft {
border: 1px solid #dfdabd;
padding: 5px;
float: left;
margin-right: 10px;
.imgRight {
border: 1px solid #dfdabd;
padding: 5px;
float: right;
margin-left: 10px;
/***** CONTACT FORM STYLES *****/
#content form{
margin: 0;
width:450px;
#content fieldset{
border: 1px solid #d69400;
margin-bottom: 10px;
padding:5px 5px 20px 20px;
#content legend {
font-size: 120%;
margin: 12px 0 0 0;
color: #18006a;
#content textarea{
background-color: transparent;
border: 1px solid #18006a;
height:200px;
margin:0 30px 0 0;
#content label{
display:block;
font-size:80%;
padding-top:5px;
#content button{
background-color: #ecc97d;
display:block;
width:80px;
/* sets the enquiry box to the right of the input fields */
.labelfloat{
padding-top:20px;/* float:right;*/
#content input:text, #content select{
/*background-color: #E8E2C2;*/
background-color: transparent;
border: 1px solid #18006a;
display:block;
margin:0 0 0 0;
width:200px;
/* END FORM STYLES */
Win
Win Day, Wild Rose Websites
http://www.wildrosewebsites.com
[email protected]
Skype winifredday -
May (HTML/HTML5) in a DIV element may have as border an image repeated along the border
May (HTML/HTML5) in a DIV element may have as border an image repeated along the border?
Browser do not support images for borders yet.
Use the CSS border properties.
Nancy O. -
How can i apply border for fluid grid layout div
How can i apply border for fluid grid layout div
<!doctype html>
<!--[if lt IE 7]> <html class="ie6 oldie"> <![endif]-->
<!--[if IE 7]> <html class="ie7 oldie"> <![endif]-->
<!--[if IE 8]> <html class="ie8 oldie"> <![endif]-->
<!--[if gt IE 8]><!-->
<html class="">
<!--<![endif]-->
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>Untitled Document</title>
<link href="boilerplate.css" rel="stylesheet" type="text/css">
<link href="CSS/Layout.css" rel="stylesheet" type="text/css">
<link rel="stylesheet" href="flexslider.css" type="text/css">
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js"></script>
<script src="jquery.flexslider.js"></script>
<!-- Place in the <head>, after the three links -->
<script type="text/javascript" charset="utf-8">
$(window).load(function() {
$('.flexslider').flexslider();
</script>
<!--
To learn more about the conditional comments around the html tags at the top of the file:
paulirish.com/2008/conditional-stylesheets-vs-css-hacks-answer-neither/
Do the following if you're using your customized build of modernizr (http://www.modernizr.com/):
* insert the link to your js here
* remove the link below to the html5shiv
* add the "no-js" class to the html tags at the top
* you can also remove the link to respond.min.js if you included the MQ Polyfill in your modernizr build
-->
<!--[if lt IE 9]>
<script src="//html5shiv.googlecode.com/svn/trunk/html5.js"></script>
<![endif]-->
<script src="respond.min.js"></script>
</head>
<body>
<div class="gridContainer clearfix">
<div id="LayoutDiv1"><img src="SJV-Images/Banners/Dark-green-curved-header.png"/></div>
<div id="LayoutDiv2">
<div class="flex-container">
<div class="flexslider">
<ul class="slides">
<li>
<img src="SJV-Images/Stud1.jpg"/>
</li>
<li>
<img src="SJV-Images/Stud2.jpg" />
</li>
<li>
<img src="SJV-Images/Stud3.jpg" />
</li>
</ul>
</div>
</div> </div>
<div id="Nav">This is the content for Layout Div Tag "Nav"</div>
<div id="Special_Features"><h3 align="center">SPECIAL FEATURES</h3>
<ul>
<li>
It is one of the oldest school.</li>
<li>It was first started as an orphanage for the children of British soldiers, and later moved to its current location.</li>
<li>Rich in Anglo-Indian tradition dating back to three centuries.</li>
<li>The campus now has separate buildings within the campus for year 1 to year 8 (Junior and Sub Junior block) and year 9 to year 12 (Senior and Super Senior block).</li>
<li>The school has montessori facilities in a separate building.</li>
<li>The School also has boarding facilities for students from distant places.</li>
</ul></div>
<div id="History"><img src="SJV-Images/His_Image.png" alt="Hisimage" class="floatleft">
<h3>HISTORY OF OUR SCHOOL</h3><P>In 1750 – a very long time ago,a missionary and a teacher, Christian Frederick Schwartz came to India to work in the Danish Mission at Tranquebar.Due to his own personal charm, genius and integrity, soon he became a trusted envoy to the court of Princes ,both hostile and friendly. He even helped in the training and education of Serfogee Rajah, the adopted son of the Tanjore Raja Tuljagee.</P></div>
<div id="Photo_Gall"><center>
<strong>PHOTO GALLERY</strong>
</center>
<p><img src="SJV-Images/Photogall.png" width="174" height="70" class="floatright"/></p>
</div>
<div id="News_Events"><center>
<strong>NEWS & EVENTS</strong>
</center><center>Annual Day<br><center>
Alumni Meet<br>
Exam Time Table<br>Parents-Teacher's Meet</center>
</center>
<br></div>
<div id="footer">This is the content for Layout Div Tag "footer"</div>
</div>
</body>
</html> -
Looking for Image Button Applet
I'm looking for a simple image button applet (normal state, mouse-over and mouse-click) which can refer to a HTML or start a Javascript function. Can anyone help?
KippieHi,
This is the source code. I don't quite understand what I should do with the tokens. I hope this is allright. Thanks for your help
Kippie.
import java.net.URL;
import java.awt.Color;
import java.util.Vector;
import java.util.Enumeration;
import java.util.StringTokenizer;
import java.applet.Applet;
import java.applet.AudioClip;
Program Name: ImageURLButtonBar
Author: Paul Whitelock
Version: 1.1
Copyright: (c) 1997 by Paul Whitelock and Modern Minds, Inc.
Requires: ImageURLButtonBar.class
ButtonBar.class
ButtonBarObserver.class (Interface definition)
ButtonRegion.class
ButtonAnimate.class
Modifications: v1.01 (15 April 97)
* Added "sticky" button behavior (controlled
by applet "stick" parameter)
v1.03 (25 June 97)
* Added applet parameter "useCodeBase". If useCodeBase
is true, then image file locations will be based on the directory
in which the Java class files are located. If useCodeBase is false, then
the locations will be based on the HTML directory. Note that audio
file locations are always based on the Java directory. The default
for useCodeBase is false (use HTML directory for base).
* The "stick" parameter will now accept a button number in
addition to the value of "true" or "false". If a button number
is specified, then that button will be "stuck" down
when the button bar initializes.
* Added the capability of loading multiple URLs for each button
with an optional target for each URL.
v1.1 (25 September 97)
* Added "baseBrighten" and "baseBrightenTint" parameters to control
highlighting for base button bar.
* Added "mouseOverBrighten" and "moBrightenTint" parameters to control
highlighting for base button bar.
* Added "mdBrightenTint" and "mdBrightenAll" parameters to control
highlighting for base button bar. Previous versions of the applet
supported "mouseDownBrighten," but only if button borders were not
drawn for the button-down button bar (the "mdBrightenAll" can be set
to "true" to override the this default behavior).
* An "appletBGColor" parameter has been added to set the
applet background color. The applet background color is
sometimes visible during scrolling or during a page repaint.
NOTE: This source code was composed using Microsoft Visual J++
with tab stops of 4. Text may not be formatted correctly
if another editor is used.
******************************** PARAMETERS ********************************
Applet Parm ButtonBar Class Parm Default Value
================== ======================= ==================
appletBGColor
disableBadURL true
mouseEnterAudio null (audio disabled)
mouseClickAudio null (audio disabled)
buttonDownAudio null (audio disabled)
stick false
* useCodeBase base false (i.e., use getDocumentBase())
orient barHorizontal horizontal if applet width > height
base baseBarName none - parameter REQUIRED
mouseOver mouseOverBarName null
mouseOver2 mouseOverBar2Name null
mouseDown mouseDownBarName null
mouseDownOver mouseDownOverBarName null
buttonsDisabled buttonsDisabledBarName null
background backgroundImageName null
barXPos barXBackgroundPos 0
barYPos barYBackgroundPos 0
buttonBorders drawButtonBorders ButtonBar.BORDERS_NONE
borderColorTL borderColorTopLeft null (Color.white if error)
borderColorBR borderColorBottomRight null (Color.gray if error)
borderIntensity borderIntensityPercent 50 (used only if borders)
borderSize buttonBorderSize 1 (used only if borders)
downShift downShift false
downShiftAmt downShiftAmt buttonBorderSize
baseBrighten baseBrightenPct
baseBrightenTint baseBrightenTint
mouseOverBrighten mouseOverBrightenPct
moBrightenTint mouseOverBrightenTint
mouseDownBrighten mouseDownBrightenPct
mdBrightenTint mouseDownBrightenTint
mdBrightenAll mouseDownBrightenAll
buttonsDisabledDim buttonsDisabledDimPct 25 (used only if no buttonsDisabled)
grayBarBrighten grayBarBrighten 0
frameRate frameRate 150 (used only if mouseOver2)
* If useCodeBase is true, then all file locations are based on the Java class file
directory (i.e., use getCodeBase()).
public class ImageURLButtonBar extends Applet implements ButtonBarObserver {
// Instance Variables
ButtonBar buttonBar;
Vector buttonURL = new Vector(10, 10);
Vector buttonURLTarget = new Vector(10, 10);
Vector buttonDescription = new Vector(10, 10);
AudioClip mouseEnterAudio = null;
AudioClip mouseClickAudio = null;
AudioClip buttonDownAudio = null;
// Applet Initialization
public void init() {
// =================================================================
// Applet ImageURLButtonBar specific parameters
// =================================================================
// appletBGColor
// Set applet background color
String parm = getParameter("appletBGColor");
if (parm != null) {
try {
setBackground(new Color(Integer.parseInt(parm, 16)));
catch (Exception e) {
reportError("appletBGColor");
// disableBadURL
// If true, then any button with an invalid URL will be disabled
parm = getParameter("disableBadURL");
boolean disableBadURL;
if (parm == null || !parm.equals("false")) disableBadURL = true;
else disableBadURL = false;
// mouseEnterAudio
// Sound to play each time the mouse enters any of the buttons
parm = getParameter("mouseEnterAudio");
if (parm != null) {
mouseEnterAudio = getAudioClip(getCodeBase(), parm);
if (mouseEnterAudio == null) reportError("Can't load " + parm);
// mouseClickAudio
// Sound to play each time a mouse down click occurs in a button
parm = getParameter("mouseClickAudio");
if (parm != null) {
mouseClickAudio = getAudioClip(getCodeBase(), parm);
if (mouseClickAudio == null) reportError("Can't load " + parm);
// buttonDownAudio
// Sound to play each time a mouse up occurs in a button (i.e, the
// button has be toggled through it's "down" position)
parm = getParameter("buttonDownAudio");
if (parm != null) {
buttonDownAudio = getAudioClip(getCodeBase(), parm);
if (buttonDownAudio == null) reportError("Can't load " + parm);
// stickyBar
// If the "stick" applet parameter is "true", then buttons will stay
// "stuck" in the down position until another button is clicked.
// If the "stick" applet parameter is the number of a button in the
// button bar, then that button will be "stuck" down when the
// button bar initializes.
int stickyBar = -1;
parm = getParameter("stick");
if (parm != null && !parm.toLowerCase().equals("false")) {
try {
stickyBar = Integer.parseInt(parm);
catch (Exception e) {
stickyBar = 0;
// =================================================================
// Class ButtonBar specific parameters
// =================================================================
// orient (barHorizontal)
// If this parameter = 'h' then the button bar is horizontal
// If this parameter = 'v' then the button bar is vertical
// If this parameter is not specified, then the button bar is
// horizontal if the applet width is greater than the applet height
boolean horizontal;
parm = getParameter("orient");
if (parm == null) horizontal = size().width > size().height;
else horizontal = parm.equals("h") ? true : false;
// base (baseBarName)
// The base image file for the buttons. This is the only image
// file that MUST be specified.
String baseBar = getParameter("base");
if (baseBar == null) {
reportError("Parameter 'base' REQUIRED!");
return;
// barXPos (barXBackgroundPos)
// barYPos (barYBackgroundPos)
// If a background image is specified then these to parameters
// represent the top-left corner location where the button bar
// should be placed on the background
int barXPos = 0, barYPos = 0;
try {
parm = getParameter("barXPos");
if (parm != null) barXPos = Integer.parseInt(parm);
parm = getParameter("barYPos");
if (parm != null) barYPos = Integer.parseInt(parm);
catch (Exception e) {
reportError("barXPos or barYPos");
barXPos = barYPos = 0;
// buttonBorders (drawButtonBorders)
// "none" = do not draw any button borders
// "all" = draw borders around all button bar buttons
// "base" = draw borders only around buttons on base button bar
// "other" = draw borders around all button bar buttons EXCEPT base button bar buttons
parm = getParameter("buttonBorders");
int drawButtonBorders = ButtonBar.BORDERS_NONE;
if (parm != null) {
if (parm.equals("base")) drawButtonBorders = ButtonBar.BORDERS_BASE;
else if (parm.equals("other")) drawButtonBorders = ButtonBar.BORDERS_OTHER;
else if (parm.equals("all")) drawButtonBorders = ButtonBar.BORDERS_ALL;
// borderColorTL (borderColorTopLeft)
// borderColorBR (borderColorBottomRight)
// Normally, borders are drawn around buttons by lightening or darkening
// the image in the border region. A specific color can be used instead
// for the top and left borders and/or the bottom and right borders. The
// value specified for either of these two parameters should be a hexadecimal
// number (e.g., "FF0000" for red, "888888" for medium gray, etc.).
Color borderColorTopLeft = null;
Color borderColorBottomRight = null;
try {
parm = getParameter("borderColorTL");
if (parm != null) borderColorTopLeft = new Color(Integer.parseInt(parm, 16));
parm = getParameter("borderColorBR");
if (parm != null) borderColorBottomRight = new Color(Integer.parseInt(parm, 16));
catch (Exception e) {
reportError("borderColorTL or borderColorBR");
borderColorTopLeft = Color.white;
borderColorBottomRight = Color.gray;
// borderIntensity (borderIntensityPercent)
// If borders are drawn for buttons, and if a border color is not specified
// (see above), then the image in the border region will be lightened or
// darkened by this percentage to create the borders.
int borderIntensityPercent = 50;
try {
parm = getParameter("borderIntensity");
if (parm != null) borderIntensityPercent = Integer.parseInt(parm);
catch (Exception e) {
reportError("borderIntensity");
borderIntensityPercent = 50;
// borderSize (buttonBorderSize)
// The size of borders, if borders are specified.
int buttonBorderSize = 1;
try {
parm = getParameter("borderSize");
if (parm != null) buttonBorderSize = Integer.parseInt(parm);
catch (Exception e) {
reportError("borderSize");
// downShift
// If true, then the button image is shift down and right downShiftAmt
// (see below) pixels when the mouse is clicked on the button.
parm = getParameter("downShift");
boolean downShift = (parm == null || !parm.equals("true")) ? false : true;
// downShiftAmt
// If downShift is true, then the button image is shift down and right
// downShiftAmt (see above) pixels when the mouse is clicked on the button.
int downShiftAmt = buttonBorderSize;
try {
parm = getParameter("downShiftAmt");
if (parm != null) downShiftAmt = Integer.parseInt(parm);
catch (Exception e) {
reportError("downShiftAmt");
// baseBrighten (baseBrightenPct)
// The base bar will be lightened by this percentage
int baseBrightenPct = 0;
try {
parm = getParameter("baseBrighten");
if (parm != null) baseBrightenPct = Integer.parseInt(parm);
catch (Exception e) {
reportError("baseBrighten");
// mouseOverBrighten (mouseOverBrightenPct)
// A button will be lightened by this percentage when the mouse
// moves over a button.
int mouseOverBrightenPct = 0;
try {
parm = getParameter("mouseOverBrighten");
if (parm != null) mouseOverBrightenPct = Integer.parseInt(parm);
catch (Exception e) {
reportError("mouseOverBrighten");
// mdBrightenAll (mouseDownBrightenAll)
// A button will be lightened by this percentage when the mouse
// moves over a button.
boolean mouseDownBrightenAll = false;
parm = getParameter("mdBrightenAll");
if (parm != null && parm.charAt(0) == 't') mouseDownBrightenAll = true;
// mouseDownBrighten (mouseDownBrightenPct)
// A button will be lightened by this percentage when it is
// clicked.
int mouseDownBrightenPct = 0;
try {
parm = getParameter("mouseDownBrighten");
if (parm != null) mouseDownBrightenPct = Integer.parseInt(parm);
catch (Exception e) {
reportError("mouseDownBrighten");
// baseBrightenTint (mouseOverBrightenTint)
// moBrightenTint (mouseOverBrightenTint)
// mdBrightenTint (mouseDownBrightenTint)
Color baseBrightenTint = null;
Color mouseOverBrightenTint = null;
Color mouseDownBrightenTint = null;
try {
parm = getParameter("baseBrightenTint");
if (parm != null) baseBrightenTint = new Color(Integer.parseInt(parm, 16));
parm = getParameter("moBrightenTint");
if (parm != null) mouseOverBrightenTint = new Color(Integer.parseInt(parm, 16));
parm = getParameter("mdBrightenTint");
if (parm != null) mouseDownBrightenTint = new Color(Integer.parseInt(parm, 16));
catch (Exception e) {
reportError("baseBrightenTint, moBrightenTint or mdBrightenTint");
// buttonsDisabledDim (buttonsDisabledDimPct)
// If a button is disabled and if there is no buttonsDisabled image,
// then the button will be dimmed by this percentage.
int buttonsDisabledDimPct = 25;
try {
parm = getParameter("buttonsDisabledDim");
if (parm != null) buttonsDisabledDimPct = Integer.parseInt(parm);
catch (Exception e) {
reportError("buttonsDisabledDim");
// grayBarBrighten
// If there is no mouseOver image, then the base image will be used for
// the mouseOver image, and a grayscale version of the base image will
// be used for base button images. This parameter can be used to lighten
// COLORS (not grays) in the image before it is converted to grayscale.
// This can help if the standard conversion produces buttons that are
// too dark.
int grayBarBrighten = 0;
try {
parm = getParameter("grayBarBrighten");
if (parm != null) grayBarBrighten = Integer.parseInt(parm);
catch (Exception e) {
reportError("grayBarBrighten");
// frameRate
// If a mouseOver2 image is specified, then this parameter controls
// how quickly animation will be performed (using mouseOver and mouseOver2
// images) in milliseconds when the mouse is moved over a button.
int frameRate = 150;
try {
parm = getParameter("frameRate");
if (parm != null) frameRate = Integer.parseInt(parm);
catch (Exception e) {
reportError("frameRate");
// =================================================================
// Instantiate the button bar
// =================================================================
try {
// Allow the use of documentBase (default) or codeBase for image file
// base directory.
URL documentBase;
parm = getParameter("useCodeBase");
if (parm == null || parm.equals("false")) documentBase = getDocumentBase();
else documentBase = getCodeBase();
// Create the button bar
buttonBar = new ButtonBar(
horizontal, /* barHorizontal */
documentBase, /* base */
baseBar, /* baseBarName */
getParameter("mouseOver"), /* mouseOverBarName */
getParameter("mouseOver2"), /* mouseOverBar2Name */
getParameter("mouseDown"), /* mouseDownBarName */
getParameter("mouseDownOver"), /* mouseDownOverBarName */
getParameter("buttonsDisabled"),/* buttonsDisabledBarName */
getParameter("background"), /* backgroundImageName */
barXPos, /* barXBackgroundPos */
barYPos, /* barYBackgroundPos */
drawButtonBorders, /* drawButtonBorders */
borderColorTopLeft, /* borderColorTopLeft */
borderColorBottomRight, /* borderColorBottomRight */
borderIntensityPercent, /* borderIntensityPercent */
buttonBorderSize, /* buttonBorderSize */
downShift, /* downShift */
downShiftAmt, /* downShiftAmt */
baseBrightenPct, /* baseBrightenPct */
baseBrightenTint, /* baseBrightenTint */
mouseOverBrightenPct, /* mouseOverBrightenPct */
mouseOverBrightenTint, /* mouseOverBrightenTint */
mouseDownBrightenAll, /* mouseDownBrightenAll */
mouseDownBrightenPct, /* mouseDownBrightenPct */
mouseDownBrightenTint, /* mouseDownBrightenTint */
buttonsDisabledDimPct, /* buttonsDisabledDimPct */
grayBarBrighten, /* grayBarBrighten */
frameRate /* frameRate */
// =================================================================
// Add buttons to the button bar
// =================================================================
ButtonRegion buttonToAdd;
String buttonNbr, urlString;
URL urlForButton;
int nbr = 0;
int buttonStart, buttonSize;
// Initialize button on bar flag (used to determine if at least one button
// was successfully added to the button bar)
boolean buttonOnBar = false;
// This loop will be exited when no more buttons can be found in the HTML
while (true) {
// Construct the prefix for the button parameters
buttonNbr = "button" + ++nbr;
// Find the starting offset and the size of the button
// If null is returned as the starting offset parameter value for the
// button, then all buttons should have been read so the loop can
// be exited.
try {
parm = getParameter(buttonNbr + "Start");
if (parm == null) break;
buttonStart = Integer.parseInt(parm);
buttonSize = Integer.parseInt(getParameter(buttonNbr + "Size"));
catch (Exception e) {
reportError("Button" + nbr + " start or size in error or missing");
buttonStart = 0;
buttonSize = 0;
// Create a ButtonRegion for the button
// The button ID will be set to the number of the button (this will
// be converted to an integer later when a buttonBarEvent is received).
buttonToAdd = new ButtonRegion("" + nbr, buttonStart, buttonSize);
// If the buttons on this button bar are "sticky" buttons, then
// enable "sticky" behavior for this button. The button will always
// "pop-up" whenever another button is clicked.
if (stickyBar >= 0) {
buttonToAdd.stickyButton(true, ButtonRegion.POPUP_ALWAYS, false);
// If the current button number matches the value of stickyBar, then the
// current button should be "stuck" down for its initial state.
if (stickyBar == nbr) buttonToAdd.setStuck(true);
// Try to add the button (i.e., the ButtonRegion) to the buttonBar
if (buttonBar.addButton(buttonToAdd)) {
// Set flag to indicate that at least one button has been added
buttonOnBar = true;
// The button was successfully added, so save the button's description
// (which will be displayed in the status bar) and the target frame
// for the button URL in the appropriate Vector.
buttonDescription.addElement(getParameter(buttonNbr + "Desc"));
buttonURLTarget.addElement(getParameter(buttonNbr + "Target"));
// Try to create a URL for the button.
// If the URL is invalid, then place an error message in the
// buttonURLTarget Vector (this will be used to warn the user
// when the button is clicked). Also, if disableBadURL is true, then
// disable the button.
String theURL;
urlString = getParameter(buttonNbr + "URL");
if (urlString != null) {
Enumeration urls = new StringTokenizer(urlString);
while (urls.hasMoreElements()) {
theURL = (String)urls.nextElement();
try {
urlForButton = new URL(theURL);
catch (Exception e) {
try {
urlForButton = new URL(getDocumentBase(), theURL);
catch (Exception e2) {
reportError("Button" + nbr + " has invalid URL");
buttonURLTarget.setElementAt("Invalid URL", nbr - 1);
urlString = null;
break;
else {
reportError("Button" + nbr + " has no URL");
buttonURLTarget.setElementAt("No URL", nbr - 1);
buttonURL.addElement(urlString);
// Remove any unused elements in the Vectors
buttonURL.trimToSize();
buttonURLTarget.trimToSize();
buttonDescription.trimToSize();
// If no buttons were added, throw exception
if (!buttonOnBar) throw new IllegalArgumentException("No buttons on bar");
// Let the buttonBar know that all buttons have been defined. This is
// really only necessary if downShift is true, but it won't hurt calling
// the method in either case.
buttonBar.allButtonsDefined();
// Add the applet as an observer so that the applet will be notified
// when button events occur.
buttonBar.addButtonObserver(this);
// Enable the button bar now that all buttons have been defined.
// (the buttonBar is disabled when it is created and must be
// specifically enabled).
buttonBar.enable(true);
// Add the buttonBar to the applet
setLayout(null);
add(buttonBar);
catch (Exception e) {
reportError("Can't create ButtonBar\n" + e);
// buttonBarEvent
// This method is called by the ButtonBar whenever a button event occurs
// It provides the ButtonBar that the event occurred for, the button ID
// that the event occurred for, and the event type.
public void buttonBarEvent(ButtonBar barID, String buttonID, int buttonEvent) {
String description;
// The buttonBar will send an IMAGES_READY event when all button bar images
// have been prepared. We are not interested in this event, but only in
// certain "action" events that occur for a button.
if (buttonEvent != ButtonBar.IMAGES_READY) {
// A number in String format was assigned as the buttonID when each
// ButtonRegion was created. The buttonID String will now be converted
// back into a number that can be used as a Vector index to retrieve
// button specific information (i.e., URL, target frame, and description).
int buttonNbr = Integer.parseInt(buttonID) - 1;
switch (buttonEvent) {
// If a mouseDown event has occurred for the button, and if an
// AudioClip is available for this event, play the AudioClip.
case ButtonBar.MOUSE_CLICK:
if (mouseClickAudio != null) mouseClickAudio.play();
break;
// If the mouse has been moved over a button, display the button's
// description in the browser's status area. If the button that the mouse
// is over is an active button, and if there is an AudioClip available
// for this event, then play the audio clip.
case ButtonBar.MOUSE_ENTER:
case ButtonBar.MOUSE_ENTER_DISABLED:
description = (String)buttonDescription.elementAt(buttonNbr);
if (description != null) showStatus(description);
if (mouseEnterAudio != null && buttonEvent == ButtonBar.MOUSE_ENTER) {
mouseEnterAudio.play();
break;
// If the mouse has been moved off of a button and if the button has
// description text associated with it, then clear the browser's
// browser's status area.
case ButtonBar.MOUSE_EXIT:
case ButtonBar.MOUSE_EXIT_DISABLED:
description = (String)buttonDescription.elementAt(buttonNbr);
if (description != null) showStatus("");
break;
// If the button has been depressed (i.e., a mouseDown followed by
// a mouseUp for the same button) then load the URL(s) for the button
// in the target frame(s), if specified. If the URL is null, then the
// URL was found to be missing or invalid, so display the text stored in
// the buttonURLTarget Vector in the brower's status area. If there is
// an AudioClip for the event, play the audio.
case ButtonBar.BUTTON_DOWN:
// Get the string of URLs and Targets for the button
String urlString = (String)buttonURL.elementAt(buttonNbr);
String targetString = (String)buttonURLTarget.elementAt(buttonNbr);
// If there is at least one URL for the button
if (urlString != null) {
URL urlForButton;
String theURL;
String theTarget;
Enumeration urls = new StringTokenizer(urlString);
Enumeration targets = null;
if (targetString != null) targets = new StringTokenizer(targetString);
// While there is another URL for the button
while (urls.hasMoreElements()) {
// Get the next String token that represents a URL
theURL = (String)urls.nextElement();
// Convert the String to a URL
try {
urlForButton = new URL(theURL);
catch (Exception e) {
try {
urlForButton = new URL(getDocumentBase(), theURL);
catch (Exception e2) {
urlForButton = null;
break;
// If the String was successfully convert to a URL
if (urlForButton != null) {
// If there is a target for this URL
if (targets != null && targets.hasMoreElements()) {
// Get the String that represents the target
theTarget = (String)targets.nextElement();
// If the target String does NOT begin with a "-",
// then load the URL in the target
if (theTarget.charAt(0) != '-') {
getAppletContext().showDocument(urlForButton, theTarget);
// Else a target for this URL should not be used
else {
getAppletContext().showDocument(urlForButton);
// Else there is no target for this URL, so just show
// the URL.
else {
getAppletContext().showDocument(urlForButton);
// Else URL is missing or invalid
else showStatus((String)buttonURLTarget.elementAt(buttonNbr));
if (buttonDownAudio != null) buttonDownAudio.play();
break;
// Error reporting
private void reportError(String message) {
message = "[ImageURLButtonBar] Error - " + message;
System.out.println(message);
showStatus(message);
} -
Relative paths for images upset by forwarding requests
Hello World.
I am using a web app deployed in Weblogic 5.1 with service pack 8.
I have hit a problem which puzzles me. When I forward a request from
one JSP to another (say from A to B) the web server seems to take the
URLs of the images on the served file (B) relative to the path on the
calling file (A). Here's a detailed explanation...
Suppose I have a the web app structured as follow
/oddApp/launch/A.jsp
/oddApp/B.jsp
/oddApp/images/tick.gif
Page A simply stores its request URI and forwards its request to page B
<jsp:forward page="/B.jsp" />
Page B displays its requestURI, contextPath and servletPath. It also
attempts
to show three images
<img src="images/tick.gif">
<img src="../images/tick.gif">
<img src="/images/tick.gif">
When I invoke page B directly, the first image is shown, the others are not.
When I invoke page A, it forwards to B and the second image is shown, the
others are not.
In each case the URI, contextPath and servletPath are correctly displayed
with regard to page B.
URI = [oddApp/B.jsp]
contextPath = [oddApp]
servletPath = [B.jsp]
The URI in A.jsp is also correct (i.e. /oddApp/launch/A.jsp).
The search for the images seems to be relative to the original URI (i.e. not
the URI used to forward), which strikes me as daft. It means that page B
must be aware of where it is being called from. It is perfectly plausible
that
relative paths which suit when called from one location are incorrect when
called from another.
I had thought that including the leadling slash (as shown as the third
image)
would cause the search relative to the document root (/oddApp/), but this
appears not to be the case. The search is done relative to the root of the
server not the web app.
Adding jsp mappings in the deployment descriptor of the web app does not
help (I had thought it a long shot anyway).
Does anyone have any thoughts on this?
PHiL
i face the same problem (WinNT, WLS6.0): my wep app has a contextRoot " root " which makes it react to the URL: http://host:port/root /: it is this folder which will be used as a basis by the Web server But in the jps I use a relative URL for images: / images/toto.gif : it works very well when I deploy my jsp out of a Web-app by setting a document.root to the weblogic web server.On the other hand, once deployed in a Web-app, images are not found because the default path of the browser is http://host:port, without the context root of the Web-app! In other words, my war has images/*.gif in its root but when /images/toto.gif is resolved in a jsp, as the relative URL is not prefixed by my context-root, the image is not search in the war! actually, if I type http://host:port/root/toto.gif, my image appearsany clues? an alias on the web server? a setting in web.xml/application.xml and their weblogic equivalent files?
-
How do I show file size in the Finder icon view for images?
How can I add the file size to the icon view "File Info" for images?
I know how to get it to display the image size under View Options. In this mode it shows pixel dimensions for some images (not for svg or pdfs tho) and file size for some non-images (rar, zip, but not txt or plain text files).
Is there some plist I can modify?Just found the answer in a post with this subject:
How Do I Change the Mailbox Font Size in the Sidebar? -
How can I make a default border for a JWindow?
I have a JWindow object that is created when a button is pressed in a JFrame. I want the JWindow to have the same type of border as the JFrame from which it's created. However, the JWindow is not created automatically with a border as the JFrame is, so I don't know how to set the border abstractly so that whatever border is used for the JFrame, per he default L&F, will also be used for the JWindow.
I tried grabbing the border object from the JFame instance itself, but there is no such field in JFrame or any of its ancestor classes. I looked at UIDefaults, but I have no idea how this class can be used to get what I want. For example, if I use UIDefaults.getBorder(Object obj), what do I specify for the argument?
I'd be happy with an abstract or a concrete solution. That is, either using the default Border for top level containers in the current L&F, or by grabbing an actual Border instance from a JFrame object.
-MarkAlso, I'm curious why you said that JFrame is not a swing component.A Swing component extends JComponent. Basically this means that all the painting of the component is done in Java. You can add Borders to any Swing component. It is called a light weight component. A light weight component cannot exist by itself on the window desktop.
JFrame, JDialog and JWindow are top level components. They can exist on their own on the windows desktop because essentially they are Windows native components. They have been fancied up to make it easy for you to access and add other Swing components to it which is why they are found in the swing package.
A Windows border is not the same thing as a Swing Border and there is no way to access the native windows border and use it in a Swing application (that I know of anyway). Swing Borders are not used in a normal JFrame, the Windows border is used. You can however, turn off the use of Windows decorations and use Swing painted decorations. Read the tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/frame.html#setDefaultLookAndFeelDecorated]Specifying Windows Decorations. However, this doesn't really help you with your Border problem. If you look at the source code for the FrameBorder, you will find that the "blue" color of the Border is only painted for "active" windows and a JWindow can never be the active window, only the parent JFrame or JDialog is considered active.
Here is a simple program for you to play around with:
import java.awt.*;
import javax.swing.*;
import javax.swing.border.*;
public class FrameDecorated
public static void main(String[] args)
JFrame.setDefaultLookAndFeelDecorated(true);
JFrame frame = new JFrame();
frame.setDefaultCloseOperation( JFrame.DISPOSE_ON_CLOSE );
frame.setSize(300, 300);
frame.setVisible(true);
Border border = frame.getRootPane().getBorder();
// Border border = UIManager.getBorder( "RootPane.frameBorder" );
System.out.println( border );
JWindow window = new JWindow(frame);
JPanel contentPane = (JPanel)window.getContentPane();
contentPane.add(new JTextField(), BorderLayout.NORTH);
contentPane.setBorder( border );
window.setSize(300, 300);
window.setLocationRelativeTo( null );
window.setVisible( true );
System.out.println("Window:" + window);
Window ancestor = SwingUtilities.getWindowAncestor(contentPane);
System.out.println("Ancestor:" + ancestor);
System.out.println(ancestor.isActive());
System.out.println(frame.isActive());
} -
DrawImage takes long time for images created with Photoshop
Hello,
I created a simple program to resize images using the drawImage method and it works very well for images except images which have either been created or modified with Photoshop 8.
The main block of my code is
public static BufferedImage scale( BufferedImage image,
int targetWidth, int targetHeight) {
int type = (image.getTransparency() == Transparency.OPAQUE) ?
BufferedImage.TYPE_INT_RGB :
BufferedImage.TYPE_INT_RGB;
BufferedImage ret = (BufferedImage) image;
BufferedImage temp = new BufferedImage(targetWidth, targetHeight, type);
Graphics2D g2 = temp.createGraphics();
g2.setRenderingHint
RenderingHints.KEY_INTERPOLATION,
RenderingHints.VALUE_INTERPOLATION_BICUBIC
g2.drawImage(ret, 0, 0, targetWidth, targetHeight, null);
g2.dispose();
ret = temp;
return ret;
}The program is a little longer, but this is the gist of it.
When I run a jpg through this program (without Photoshop modifications) , I get the following trace results (when I trace each line of the code) telling me how long each step took in milliseconds:
Temp BufferedImage: 16
createGraphics: 78
drawimage: 31
dispose: 0
However, the same image saved in Photoshop (no modifications except saving in Photohop ) gave me the following results:
Temp BufferedImage: 16
createGraphics: 78
drawimage: 27250
dispose: 0
The difference is shocking. It took the drawImage process 27 seconds to resize the file in comparison to 0.78 seconds!
My questions:
1. Why does it take so much longer for the drawImage to process the file when the file is saved in Photoshop?
2. Are there any code improvements which will speed up the image drawing?
Thanks for your help,
-RogierYou saved the file in PNG format. The default PNGImagReader in core java has a habit of occasionally returning TYPE_CUSTOM buffered images. Photoshop 8 probably saves the png file in such a way that TYPE_CUSTOM pops up more.
And when you draw a TYPE_CUSTOM buffered image onto a graphics context it almost always takes an unbearably long time.
So a quick fix would be to load the file with the Toolkit instead, and then scale that image.
Image img = Toolkit.getDefaultToolkit().createImage(/*the file*/);
new ImageIcon(img);
//send off image to be scaled A more elaborate fix involves specifying your own type of BufferedImage you want the PNGImageReader to use
ImageInputStream in = ImageIO.createImageInputStream(/*file*/);
ImageReader reader = ImageIO.getImageReaders(in).next();
reader.setInput(in,true,true);
ImageTypeSpecifier sourceImageType = reader.getImageTypes(0).next();
ImageReadParam readParam = reader.getDefaultReadParam();
//to implement
configureReadParam(sourceImageType, readParam);
BufferedImage img = reader.read(0,readParam);
//clean up
reader.dispose();
in.close(); The thing that needs to be implemented is the method I called configureReadParam. In this method you would check the color space, color model, and BufferedImage type of the supplied ImageTypeSpecifier and set a new ImageTypeSpecifier if need be. The method would essentially boil down to a series of if statements
1) If the image type specifier already uses a non-custom BufferedImage, then all is well and we don't need to do anything to the readParam
2) If the ColorSpace is gray then we create a new ImageTypeSpecifier based on a TYPE_BYTE_GRAY BufferedImage.
3) If the ColorSpace is gray, but the color model includes alpha, then we need to do the above and also call seSourceBands on the readParam to discard the alpha channel.
3) If the ColorSpace is RGB and the color model includes alpha, then we create a new ImageTypeSpecifier based on an ARGB BufferedImage.
4) If the ColorSpace if RGB and the color model doesn't include alpha, then we create a new ImageTypeSpecifier based on TYPE_3BYTE_BGR
5) If the ColorSpace is not Gray or RGB, then we do nothing to the readParam and ColorConvertOp the resulting image to an RGB image.
If this looks absolutely daunting to you, then go with the Toolkit approach mentioned first. -
Recommended image size and dimensions for images displayed on iPad retina?
What are the recommended dpi image size and dimensions for images designed in DPS app as displayed on an iPad retina?
Take a look at the following link:
http://blogs.adobe.com/indesigndocs/2012/03/guidelines-for-creating-folios-for-ipad-3.html -
Error opening PDF in 9.1.0 ("Insufficient Data for image") and 7.0.9
I generate PDF documents in code (basically converts TIFF images to PDF, using FOP).
Few of the PDFs can not be viewed on Adobe Reader 9.1.0, and 7.0.9. But, these open fine on 8.0 version.
With 9.1.0 version I get error as "Insufficient Data for image"
With 7.0.9 the error is "A drawing error occured"
8.0 works fine and opens the PDF.
Is there any issue with 9.1.0 for opening PDFs, I got this version installed recently on my system.
Appreciate an early help/views on this issue.
Thanks,
UmakantTry this - from adobe support!
It worked for me and (as it seems) solved a one year long anoying issue.
1. Exit Acrobat.
2. Choose Start > Run, and type: %APPDATA%\Adobe\Acrobat\ into the Open text box. Click OK.
3. Right-click either the 6.0 or 7.0 folder, and choose Delete.
I deleted both folders.
Dont worry these two preferences folders will automatically be renewed by acrobat! -
Radio group with URL for image in a table
I'm trying to display some text and an image for a radio group so the form looks like
(*) text for item 1 {image for item 1}
( ) text for item 2 {image for item 2}
( ) text for item 3 {image for item 3}
I've found these:
Re: Is it possible to display an image instead of button in a radio group?
How to show image in radio group ?
It looks like all I have to do is create a LOV that looks like:
SELECT {complex stuff that generates the text string, img tag, and URL for image}
,DB_PK
FROM dynamic_view_for_lov -- public synonym
But, my images are stored in a table.
I have been able to create an IR using the "Column Format=BLOB" method.
The SQL for the report looks like:
select
db_pk, display_text, image_len, image_clob
from dynamic_view_for_lov -- public synonym
And the Number/Date Format for the IMAGE_LEN column is:
IMAGE:DYNAMIC_VIEW_FOR_LOV:IMAGE_BLOB:DB_PK::::::Inline:Download
My question: How do I create the URL for the img tag for the LOV?
many thanks
MKMikeKutz wrote:
I think Homer Simpson said it best: Doh!
For the person in the future, you have to 'fake create' the Automated Row Fetch process.
The get_blob_file_src gets all the information from that Process and the column name of the Item Type that is on the same page.
I forgot where I read about that trick.
Basically, you create the Automated Row Fetch process, then 'disable' it.
Same thing with the required Item Type. Create it as a "File Type", just to tell APEX that it comes from a Database Column,.... then change it to a 'hidden' type.
You don't have to "fake' it if the application already contains the file upload item and ARF. The assumption is that the application will contain these components in order to maintain the BLOBs and you'll just reference the functional ones. -
Is there a substitute tool path for "Image>Adjustments>Variations…" in Photoshop CS6 Standard Addition that brings similar results? I was used to using Image>Adjustments>Variations… in Photoshop CS4 Standard Standard Addition quite often. I upgraded to Photoshop CS6 Standard Addition to get the 64bit memory architecture compatibility on my Macbook Pro, booted in Mountain Lion. I see now that Photoshop CS6 Standard Addition has the "Image>Adjustments>Variations…" tool path removed.
I don't have Photoshop CS6 Extended, which has the all new Image>Adjustments>Variations… tool path. I only have Photoshop CS6 Standard Addition so, if anyone can share with me a substitute tool set that can give me similar results to using the old "Image>Adjustments>Variations…," I would appreciate it.Thanks, R_Kelly.
You helped me to start exploring other tools in the Image>Adjustments Menu. "Image>Adjustments>Color Balance…" seemed to help me get the results that "Image>Adjustments>Variations…" used to deliver. "Image>Adjustments>Photo Filter>Warming Filter (85)" also got me to where I wanted to be in desired adjustments. I used to get the results I wanted in brightness, contrast, mid-tone adjustment, and color balance buy using just Curves, Variations, and Hue/Saturation. Now I'll use "Color Balance…" and "Photo Filter>Warming Filter (85)" along with Curves, and Hue/Saturation. I also have learned to use "Levels" some more to get the same effect as Adjustments>Variations…" I always thought there were more technically precise adjustment tools to get the same effect as "Image>Adjustments>Variations…" Adobe dropping Variations in Photoshop CS6 Mac version forced me to learn better image adjustment approaches for pre press color correction and image warming. I feel confident now to make Photoshop CS6 my prime-time work tool and move the Photoshop CS4 launch icon off of my Mac OS app Dock. Thanks again, R_Kelly.
Maybe you are looking for
-
Server 2008 with SQL server 2003 installation problem in SAP 8.8 in clint
Hello Sir I want to install clint for SAP B1 8.8 and we have windows server 2008 with sql server 2005 when i install the clint i got one error in DI API installation that licence server name and port number is not available. Please tell me the comple
-
Help Needed Created Standalone Network for iTunes DJ
I use my MBP to manage backing tracks for a band. I would like to use iTunes DJ for requests from the audience via wireless connection via *iPhone/iPod Touch Remote app*. I would use this option in conjunction with a printed song list and small reque
-
Passing a parameter to applicationResources
I can't seem to find the answer anywhere. I know how to do this with Struts and JSTL tags but how can I do it in plain old Java? Given an entry in applicationResources like this: my.label=Hello {0} How can I pass the text "Joe" so that: properties.ge
-
Sync with BB Link and Pictures/Video
When syncing media from my Z10 everything is fine, I have a copy on my phone and PC. Under sync settings, there is a note under Files that any new files creates on the phone will sync to the PC automatically. It also states that any changes made to t
-
Should I uninstall PE8 trial version before instaling PE8 ?
Just wondering what is the reccomended way to install PE8 after previously installing the trail version. Should I uninstall the trial version and re-install PE8, or just enter my license info to the trial version ? I thought the boxed version has so