BOXI to output file to web folder
Hello,
I want to upload a generated excel file from BusinessObjects to a web folder instead of a unmanaged disk destination option. I tried something like this but it doesn't work
dev-training-sps.abcd.com\newhire\Reports Library
Is this possible?
Thanks,
Can you copy and paste the above url/share into start/run on the XI server itself and when that url/share comes up copy a file in it? And do this with the same user account that the XI services use.
If NOT, than no..you can't do what you looking for.
Currently the only destination options in XI are: file system, FTP or email.
A work around might be to use an event in XI that gets kicked of after you schedule a file to a folder. And this event would kick of a third party app or script that simply grabs any file in that folder and forwards it to your web share.
Regards,
Duncan
Similar Messages
-
By default where does report write output files on web server
I am running forms and reports over web. I am running a form which on the click of a button runs a report. Using the
Orarrp utility (I already have) I want to print this report.
In my form trigger I am using the run_report_object and I set report parameters DESTYPE to File, and I set
DESNAME giving it a file name. When report finishes, I use Show_Document('http://server:domain/filename.ext','_blank'),
it returns the 404 error, The requested URL /receipt.rrpa was not found on this server.
Can anyone tell me, by default where the server writes the file output? I have checked under
$ORACLE_HOME/reports60/server/cache but did not find my output file.
Is there a way to specifically direct the output file to a directory, and have the reports server recognize the path?
Perhaps using some sort of 'Virtual Path' in the server configuration, but where?
Any help is appreciated?
Regards
MarkHi,
destype file writes the file to wherever you send it to.
destype=file desname = c:\temp\myRep.html
creates the file myRep.html in the temp directory on the server. Destype 'cache' only writes to the Cache directory you mention. normally, if not giving any directory information, it's the working directory that the file gets created in. Do a seacrh for your file and I am sure that you'll find it.
regards Frank -
By default where do reports write output files on web server
I am running forms and reports over web. I am running a form which on the click of a button runs a report. Using the
Orarrp utility (I already have) I want to print this report.
In my form trigger I am using the run_report_object and I set report parameters DESTYPE to File, and I set
DESNAME giving it a file name. When report finishes, I use Show_Document('http://server:domain/filename.ext','_blank'), it returns the 404 error, The requested URL
/receipt.rrpa was not found on this server.
Can anyone tell me, by default where the server writes the file output? I have checked under
$ORACLE_HOME/reports60/server/cache but did not find my output file.
Is there a way to specifically direct the output file to a directory, and have the reports server recognize the path?
Perhaps using some sort of 'Virtual Path' in the server configuration, but where?
Any help is appreciated?
Regards
MarkHi Mark,
In Oracle Reports 6i, reports is only written to cache when DESTYPE=cache. For DESTYPE=File, the report is wriiten in DESNAME mentioned.
Your URL : http://server:domain/filename.ext, filename.ext is respective to the WebServer root directory. Assume your Webserver roor directory is "d:\apache\home".
Set the DESNAME respective to your Webserver root directory (DESNAME=d:\apache\home\filename.ext).
With Regards
Reports Team -
I am new to Robohelp. I am using Robohelp 8 and FrameMaker 9 for TC 2 on Windows XP.
Previously I used Webworks Publisher 2003 to convert my project and the output was put into one folder. I'm having difficultly figuring out how to do that with Robohelp 8. Right now it is putting each converted page in a separate subfolder with a *.css file. I don't even need the *.css file for each file because I just use one *.css file for the whole project.
So, for example, if I convert a FrameMaker book called BigBook.book and it has these files:
-ScreenA.fm
-ScreenB.fm
-ScreenC.fm
Then, I want Robohelp to put all of the converted book files in a folder called "Output" with the names:
-ScreenA.htm
-ScreenB.htm
-ScreenC.htm
Why? This help is contextual and I hand it over to the developers for the help. When the end-user clicks the help button, the GUI has a script that looks in one folder for a *.htm file that matches the *.jsp file of the GUI.
Sorry if this has been asked before. I looked around, but I could not find anything.
Thanks,
M.HessWelcome to the RH forums.
Can you clarify for us whether you are linking a FrameMaker document to your RoboHelp project and updating the content, or importing your FrameMaker documents? It sounds like the later.
In this case, what you can do is create a folder in your RoboHelp project called "Output". Before you import your FrameMaker documents, select this folder in your Project Manager pod. This ensures that any imported files are placed inside that directory. As you already have files you've imported, you can move them to a directory as you see fit. Just create an "Output" folder and click and drag the files into it in the Project Manager pod.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter -
I have created a page that a user can add content to via a WebDAV connection thru her local machine (url in My Network Places).
This page is then published as a portlet and included on another page so that all users can download the files that have been dragged into the WebDAV connection window by the user mentioned above....
All of a sudden, the "Display Name or Image" is no longer clickable for downloading the files... The name appears for each file, but that is all.....
Any ideas!Hi Candace, thanks for your time!
Nothing is "clickable".... as in, nothing will is hyperlinked to each individual file....
In my settings for items in this region, I have chosen mime type image, Image or Display Name Link, and when updated as attributes....
All that appears for each item/file is Image or Display Name and item updated info, though neither of which is clickable, or hyperlinked.....
Arrrrrghhhh.......... -
Files copied using web folder clipped
Hi!
When copying files using Web Folder in I.E. 6.0 all files larger than circa 65 kb are clipped/truncated at some point between 65,000 up to 67,000 bytes.
I'd apreciate any hints on this matter very much!
Thanks!
ORA-21000ok,
let's try to isolate the problem.
1) please try to get more error log information by raising the log level as described here: Re: http error log
2) try to find the specific file, webdav complains about. Does is contain special characters?
Can you post the filename here?
3) try to set the browser language to en-us.
I need some more information.
Thanks,
~Dietmar. -
I have been searching high and low for this one. I have a vbscript that can successfully perform the function if one file is listed. It does a Wscript.echo on the results and if I run this via command using cscript, I can output to a text file
that way. However, I cannot seem to get it to work properly if I want it to search ALL the files in the folder. At one point, I was able to have it create the output file and appear as if it worked, but it never showed any results when the script
was executed and folder was scanned. So I am going back to the drawing board and starting from the beginning.
I also have a txt file that contains the list of string text entries I would like it to search for. Just for testing, I placed 4 lines of sample text and one single matching text in various target files and nothing comes back. The current script
I use for each file has been executed with a few hundred string text lines I want it to search against to well over one thousand. It might take awhile, but it works every time. The purpose is to let this run against various log files in a folder and
let it search. There is no deleting, moving, changing of either the target folder/files to run against, nor of the file that contains the strings to search for. It is a search (read) only function, going thru the entire contents of the folder and
when done, performs the loop function and onto the next file to repeat the process until all files are searched. When completed, instead of running a cscript to execute the script and outputting the results to text, I am trying to create that as part
of the overall script. Saving yet another step for me to do.
My current script is set to append to the same results file and will echo [name of file I am searching]: No errors found. Otherwise, the
output shows the filename and the string text that matched. Because the results append to it, I can only run the script against each file separately or create individual output names. I would rather not do that if I could include it all in one.
This would also free me from babysitting it and running each file script separately upon the other's completion. I can continue with my job and come back later and view the completed report all in one. So
if I could perform this on an entire folder, then I would want the entries to include the filename, the line number that the match occurred on in that file and the string text that was matched (each occurrence). I don't want the entire line to be listed
where the error was, just the match itself.
Example: (In the event this doesn't display correctly below, each match, it's corresponding filename and line number all go together on the same line. It somehow posted the example jumbled when I listed it)
File1.txt Line 54
Job terminated unexpectedly
File1.txt Line 58 Process not completed
File1.txt
Line 101 User input not provided
File1.txt
Line 105 Process not completed
File2.txt
No errors found
File3.txt
Line 35 No tape media found
File3.txt
Line 156 Bad surface media
File3.txt Line 188
Process terminated
Those are just random fake examples for this post.
This allows me to perform analysis on a set of files for various projects I am doing. Later on, when the entire search is completed, I can go back to the results file and look and see what files had items I wish to follow up on. Therefore, the
line number that each match was found on will allow me to see the big picture of what was going on when the entry was logged.
I actually import the results file into a spreadsheet, where further information is stored regarding each individual text string I am using. Very useful.
If you know how I can successfully achieve this in one script, please share. I have seen plenty of posts out there where people have requested all different aspects of it, but I have yet to see it all put together in one and work successfully.
Thanks for helping.I'm sorry. I was so consumed in locating the issue that I completely overlooked posting what exactly I was needing help with. I did have one created, but I came across one that seemed more organized than what I originally created. Later
on I would learn that I had an error in log location on my original script and therefore thought it wasn't working properly. Now that I am thinking that I am pretty close to achieving what I want with this one, I am just going to stick with it.
However, I could still use help on it. I am not sure what I did not set correctly or perhaps overlooking as a typing error that my very last line of this throws an "Expected Statement" error. If I end with End, then it still gives same
results.
So to give credit where I located this:
http://vbscriptwmi.uw.hu/ch12lev1sec7.html
I then adjusted it for what I was doing.
What this does does is it searches thru log files in a directory you specify when prompted. It looks for words that are contained in another file; objFile2, and outputs the results of all matching words in each of those log files to another file: errors.log
Once all files are scanned to the end, the objects are closed and then a message is echoed letting you know (whether there errors found or not), so you know the script has been completed.
What I had hoped to achieve was an output to the errors.log (when matches were found) the file name, the line number that match was located on in that file and what was the actual string text (not the whole line) that matched. That way, I can go directly
to each instance for particular events if further analysis is needed later on.
So I could use help on what statement should I be closing this with. What event, events or error did I overlook that I keep getting prompted for that. Any help would be appreciated.
Option Explicit
'Prompt user for the log file they want to search
Dim varLogPath
varLogPath = InputBox("Enter the complete path of the logs folder.")
'Create filesystem object
Dim oFSO
Set oFSO = WScript.CreateObject("Scripting.FileSystemObject")
'Creates the output file that will contain errors found during search
Dim oTSOut
Set oTSOut = oFSO.CreateTextFile("c:\Scripts\errors.log")
'Loop through each file in the folder
Dim oFile, varFoundNone
VarFoundNone = True
For Each oFile In oFSO.GetFolder(varLogPath).Files
'Verifies files scanned are log files
If LCase(Right(oFile.Name,3)) = "log" Then
'Open the log file
Dim oTS
oTS = oFSO.OpenTextFile(oFile.Path)
'Sets the file log that contains error list to look for
Dim oFile2
Set oFile2 = oFSO.OpenTextFile("c:\Scripts\livescan\lserrors.txt", ForReading)
'Begin reading each line of the textstream
Dim varLine
Do Until oTS.AtEndOfStream
varLine = oTS.ReadLine
Set objRegEx = CreateObject("VBScript.RegExp")
objRegEx.Global = True
Dim colMatches, strName, strText
Do Until oErrors.AtEndOfStream
strName = oFile2.ReadLine
objRegEx.Pattern = ".{0,}" & strName & ".{0,}\n"
Set colMatches = objRegEx.Execute(varLine)
If colMatches.Count > 0 Then
For Each strMatch in colMatches
strText = strText & strMatch.Value
WScript.Echo "Errors found."
oTSOut.WriteLine oFile.Name, varLine.Line, varLine
VarFoundNone = False
Next
End If
Loop
oTS.Close
oFile2.Close
oTSOut.Close
Exit Do
If VarFoundNone = True Then
WScript.Echo "No errors found."
Else
WScript.Echo "Errors found. Check logfile for more info."
End If
End if -
when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?
Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.'' -
Context-sensitive help - where is the CS topic folder in the output files?
I have created a FlashHelpPro help file in RoboHelp 7 HTML. In the project setup pane, I have Map ID'd my context-sensitive topics and linked them to their respective pages. I generated the project, but there is no folder containing the context-sensitive topics in the output files. As a result, the developer suggested that I need to create a separate folder in the Project Manager that contains all the context-sentitive topics. Is this actually the next step, or can the developer find what he needs elsewhere in the files?
I haven't seen anything about creating a separate folder in the Project Manager, which seems redundant as there is the 'Context-sensitive Help' folder already present in the Project Set-up. Do I need to create a separate folder, as suggested by the developer? If not, where can he find the context-sensitive files in the output? Thank you.Hi,
What do you mean that the context sensitive topics are not in the output? RoboHelp generates your output and (in WebHelp, so the same should count for FlashHelp) puts the context sensitivity in cshdat_webhelp.htm. Your developer doesn't need to worry about this, he just has to get his call right.
For information on calling the help, see http://www.grainge.org/pages/authoring/calling_webhelp/calling_webhelp.htm. It's for WebHelp but it should be the same for FlashHelp.
If your developer only wants to know which mapid's he has to call, you best give them your map files (the .h files).
Greet,
Willam
This e-mail is personal. For our full disclaimer, please visit www.centric.eu/disclaimer. -
Which folder i have to put my .jsp file for web report?
for web report(not the paper report) i put my .jsp files in the
\reports\j2ee\reports_ids\web
folder
this is for the DS(Developer Suite)
i'm trying to move this file to different machine where AS(Application Server)
is installed.
but couldn't find above path. where do i have to put .jsp file for
web report?
or do i have to modify in the registry? if so, where?
ThanksHello,
Take a look to the thread :
where to add new jsp reports directory location in path
"...You have to keep jsp files under document root that is OH/j2ee/OC4J_BI_Forms/applications/reports/web directory. You can create sufbolders under this directory and keep jsp files. ..."
Regards -
Add check box in alv output list in web dynpro
Dear Friends,
I want to Add check box in begining of each row of alv output list for WEB DYNPRO Program.
ISHALalsha - you need an attribute (I will named check_box) in your context node to be in the 1st position of your ALV context node
Data: lv_check_box type ref to cl_salv_wd_uie_checkbox,
lr_table_settigns type ref to if_salv_wd_table_settings,
l_value type ref to cl_salv_wd_config_table,
lt_columns type salv_wd_t_column_ref,
ls_column type salv_wd_s_column_ref,
l_col_name type string.
if l_value is not initial.
lr_table_settings ?= l_value.
lt_columns = l_value->if_salv_wd_column_settings~get_columns( ).
Loop AT lt_columns into ls_column.
l_col_name = ls_column-r_column->get_id( ).
IF l_col_name = 'check_box' *your attribute name*
CREATE OBJECT lv_check_box
EXPORTING
checked_fieldname = l_col_name.
ls_column-r-column->set_cell_editor( value = lv_check_box ).
endif.
endloop
Hope this help
Jason P-V -
Is any way search REMOTE VIEW of a web folder(files on server), the source code(all soite search) for a word eg an email address? how?
I must await a lot to finish?I search all Local View (site) for forms submitted to [email protected] and deleted that email although I still get SPAM(Nothing in body) emails sent to:
[email protected]; [email protected] (to both in TO field)
first is the normal address left no need deleted, the yahoo address deleted.... well where this form processor located and get spam[PHP Site]...???
I run SELECT NEWER IN REMOTE SITE
But nothing selected, well? -
Upload Entire Folder with Files to Web Page
Can someone please inform me how to upload a Folder with multiple files in the folder. We have many many files that we need to have viewed on the outside but don't want to have to link every single file. I am using CS5.
Thank you!Hello-
I did exactly what you said. I created the folder on the local and the local and remote folder do match. I created the link and uploaded everything. When I click on the link I receive an error message "HTTP 403 Forbidden". Can you please tell me what this means, what I may be doing wrong. Does this mean that directory browsing is disabled? How do you use a server side script that dynamically reads the file system and creates links?
Thank you!
The website declined to show this webpage
HTTP 403
Most likely causes:
This website requires you to log in.
What you can try:
Go back to the previous page. -
How to display local HTML file in web-view?
Hello everyone,
we have no problem with showing of remote HTML content from server in box on page in web view. But how we can show such a content when included in HTMLResources? In guide is just "Display a local HTML file in an in-app browser", which works wihout problem, but we don't want to show this HTML content in in-app viewer, it should be part of page.
Thanks
MartinNow i'm confused. In guide is this:
To use local HTML files, click the folder icon and specify the local HTML file. The HTML file (such as index.html) should appear in a folder that includes any images or scripts used in the HTML file.
But no info where such a local HTML file should reside. If this file is in HTMLResources, it is ignored. -
Uploading Multiple Files from web client to web server
Am using a Digitally signed applet to pickup files from a specific directory and only to pickup those of a specific type. Applet is called by a HTML converted page and uses the JAVA 1.3.1 plug-in. Client side is ok, but the server side does not work - cannot see how to drop the files down onto the web server.
code
URL url = null ;
FileInputStream filReader = null ;
DataOutputStream dosOutfile = null ;
HttpURLConnection httpUrlConn = null ;
int bytes = 0 ;
//read local file on client's hd with signed applet
try
filReader = new FileInputStream( new File( fromFile ) );
catch ( java.io.FileNotFoundException eNotFound )
DisplayStatus ( fromFile + " Not found");
eNotFound.printStackTrace();
// start setup to server-side copy of in file
try
url = new URL ( toFile ) ;
catch ( java.net.MalformedURLException eMalFormedUrl )
DisplayStatus ( url + " url mal formed");
eMalFormedUrl.printStackTrace();
// create a HttpUrl connection for POSTING
try
httpUrlConn = (HttpURLConnection) url.openConnection(); // do not remove this casting, as needed
catch ( java.io.IOException eIoException )
DisplayStatus ( url + " IO not possible");
eIoException.printStackTrace();
// set preferences
httpUrlConn.setDoInput(true); // default value, but best make sure
httpUrlConn.setDoOutput(true); // default value, but best make sure
httpUrlConn.setUseCaches(false); // enable write straight through
try
httpUrlConn.setRequestMethod("POST") ;
// httpUrlConn.setRequestMethod("PUT") ;
} catch ( java.net.ProtocolException eProtEx )
DisplayStatus ( "Protocol Exception on setting up POST") ;
eProtEx.printStackTrace();
httpUrlConn.setRequestProperty("Content-Type", "multipart/form-data");
// permissions?
try
java.security.Permission permission = httpUrlConn.getPermission() ;
if ( iDebug == true )
DisplayStatus ("Permission = " + permission.toString() ) ;
DisplayStatus ( "Actions = " + permission.getActions() ) ;
DisplayStatus ( "Name = " + permission.getName() ) ;
catch ( java.io.IOException eUrlIOConnException )
DisplayStatus ( "httpUrl " + httpUrlConn + " IO not possible");
DisplayStatus ( eUrlIOConnException.toString() ) ;
eUrlIOConnException.printStackTrace();
// connect
try
this.VerifyHttpResponseCode ( httpUrlConn.getResponseCode() ) ;
DisplayStatus ("About to connect") ;
httpUrlConn.connect() ;
DisplayStatus ("Connected") ;
if ( iDebug == true )
DisplayStatus ("Connected Content Encoding = " + httpUrlConn.getContentEncoding() ) ;
DisplayStatus ("Connected Content Length = " + httpUrlConn.getContentLength() ) ;
DisplayStatus ("Connected Content Type = " + httpUrlConn.getContentType() ) ;
DisplayStatus ("Connected default allow user interaction = " + httpUrlConn.getDefaultAllowUserInteraction() ) ;
DisplayStatus ("Connected File Map = " + httpUrlConn.getFileNameMap() ) ;
DisplayStatus ("Connected request method = " + httpUrlConn.getRequestMethod() ) ;
DisplayStatus ("Connected response code = " + httpUrlConn.getResponseCode() ) ;
DisplayStatus ("Connected response message = " + httpUrlConn.getResponseMessage() ) ;
DisplayStatus ("Connected = " + httpUrlConn.getURL() ) ;
} // end of debug print out status
catch ( java.net.ConnectException eConnEx )
this.DisplayStatus ( "Connection error - no server listening or incorrect port " ) ;
this.DisplayStatus ( "Connection error - http = " + httpUrlConn) ;
eConnEx.printStackTrace();
catch ( java.io.IOException eUrlConnException )
DisplayStatus ( "url " + url + " connection not possible");
DisplayStatus ( eUrlConnException.toString() ) ;
eUrlConnException.printStackTrace();
// create file on server
try
dosOutfile = new DataOutputStream ( new BufferedOutputStream( httpUrlConn.getOutputStream () ) ) ;
catch ( java.io.IOException eNewFileIO )
DisplayStatus ("Unable to create file on server / buffer output stream " + toFile ) ;
// copy files char by char for the moment, till testing complete
try
bytes = filReader.read();
while(bytes != -1)
dosOutfile.writeByte(bytes);
bytes = filReader.read();
// close both files
dosOutfile.flush ();
dosOutfile.close ();
filReader.close();
catch (java.io.IOException eCpyIo )
DisplayStatus ("Error copying files") ;
connection of the HttpURLConnection
gives 'Fobbiden' response for 'PUT'
and
'method not allowed' for 'POST'
trying to create the file on the server than causes IOException at the create DataStream line
What am I doing wrong?
Is this philosphy correct?
Should the HttpURLConnection be to the target folder
and then create the file in it?hello,
first here is my interpretation of your prob.
You have a client.From this client you are trying to upload files onto a server.
Finding the files and reading them on the client side is not a prob. The prob is storing them on the server side.
right?
If the above stated prob is right, here is a solution.
1. You have to first inform the server that you are sending the file. Unless you do so the server will not understand when you have started sending the file.
So, initially, the applet which you have written need to communicate with a servlet on the server side.
This can be done using reqs.. .get or post.In the req itself you can even send the name of the folder wherein you want to store the file you are going to transfer later on.
Next, after receiving the folder name, the servlet can now understand that next file data is going to be received.
The applet now sends the file which is received by the servlet and stored appropriately.
You need to explicitly write a servlet to receive a data into the file and then store the file into appropriate folder.
for any further probs email me at [email protected]
Maybe you are looking for
-
How can i use the same cursor in a loop fro multipletimes.
I am using two cursors.One to fetch sites and the other to fetch participants under each site.I am performing some job with that participants data.Now the problem is i am using the 2nd cursor in a loop.So it fetches the data of participants falling u
-
My Mac Mini keeps waking up all of a sudden
Since a few days ago, I've noticed my late-2012 Mac Mini would wake up almost immediately after it goes to sleep. This is the same whether I let the Mac idle to the present sleep time, or if I manually tell the computer to sleep via the Apple menu.
-
Firefox will not load any web pages since update
Using Galaxy Nexus, installed update today. I have ICS version 4.0.1. Pages will not load at all. Even the firefox pages on the home page will not load. I verified with using both wifi and my network, and checked the stock browser from the phone whic
-
I know there are many ways I can move music to another Mac - but I'm only interested in this one for now - can I burn music in iTunes to a DVD just like I would to a CD except with a much larger capacity (DVD)?
-
I have been unable to run NFL Mobile on my Incredible for the last couple of days. It was working before (although I no longer have free access to Redzone). Now when I try to load it, I get the error "Your current data plan is not supported. Nfl Mo