(BPC) Is it possible to work 200 user simultaneously?

Hello, BPC Experts.
We have the requirement for simultaneously working about 200 user.
Does BPC support such loading?
Could you please provide me some technical specifications.

Hello Dmitry,
It is certainly possible to have 200 concurrent users working with BPC and the technical guidance depends on the answers to questions like:
- Which version of BPC are you using
- Which version of Microsoft SQL are you using (if using BPC for Microsoft)
- Complexity of reporting (Size of reports, number of dimension member formulas)
- Amount of data being loaded and amount of logic being calculated
- Amount of business logic being executed
- etc.
Some general rules of thumb for the Microsoft release are to have around 50 users per .NET server (a max of 75 unless there is a very simple application set) and to make sure to deploy on a 64 bit architecture where possible (for example, Microsoft SQL server 2008, etc).  Note - the .NET tier for the Microsoft release currently only supports a 32 bit architecture.
These recommendations generally hold true for the NetWeaver  release as well in the sense that the ABAP / Database tiers should be implemented on scalable hardware.  The .NET tier in the NetWeaver  release operates in a slightly different way than on the Microsoft release.  It communicates with the NetWeaver  tier using RFC requests and each ABAP  instance has a hard limit of 100 possible RFC connections.  Because of this it is not possible to have more than 100 users per .NET server in a NetWeaver  installation without queuing occurring and loading the servers to the maximum extent would not be recommended.
Ultimately, BPC will support 200 concurrent users (and more), though load testing can be done to validate your hardware / business processes once you application set and business processes are in a testable state.  There are some HowTo Guides on SDN related to BPC and LoadRunner that review the load testing process with BPC.
Thank you,
Daniel

Similar Messages

  • Is that possible to display the user selection data in the printable page?

    Hi All,
    I'm going to add a printablepage button on my page.
    Here comes a questions.
    Is that possible to display the user selection data in the printable page?
    For example,
    I have a table in the page,with 10 records.User select 5 of them.Can I display these 5 records in the printable page?
    Please help.

    Hi Yannick,
    Thanks a lot for the information. It worked.
    The portlet data can be accessible using bindings, but parameter name can be different.
    Meanwhile I have got one more scenario, where the Portlet and Task Flow placed in different pages of WCP Application. On change of data in the Portlet the application should navigate to another page where the Task Flow placed and displays selected data.
    Basically I can not use any button for navigation. The navigation should happen once I do some action in Portlet.
    Is this possible? If yes can you please let me know the steps?
    Thanks in advance!
    Somnath
    Edited by: Somnath Basak on Dec 20, 2011 9:41 AM

  • Is it possible to change the user status of a TECO Order

    Hello Folks
    Is it possible to changes the user status of a TECO Order?
    I have tried to change it using the FM 'STATUS_CHANGE_EXTERN'. Its working fine for NON TECO Orders but not for TECO Orders.
    On the other hand I was able to manually change the user status for a TECO Order in transaction IW32.
    I need to change the user status from NFBK to FBK.
    Please provide some inputs for the same.
    Thanks n Regards
    Ramesh

    The simple way is via the Internationalization settings via ARD or RDP or Screen Sharing, either via System Preferences or (if enabled) via the menu bar. If you're looking for a lower-level approach, there's not AFAIK a direct command for this. As for one possible approach, might [threadID=2106201|http://discussions.apple.com/thread.jspa?threadID=2106201] help?

  • Exchange 2010 Migration of 200 Users/Force Archiving

    Exchange 2010 Outlook 2007
    Here's my situation.  We are migrating 200 mailboxes from our current domain which will be absorbed into another company/organization.  The new organization is putting limits on our users mailboxes of 100 Mb or 5000 items in order to make a smooth
    transition from our Exchange environment prior to them absorbing all of our mailboxes.  Of the 200 users a quarter of them are way over that limit.  We have sent out numerous emails informing the users (mostly offsite) to archive all of their emails
    and clear out the "deleted"/"sent" items.  Obviously no one has listened to our requests to get their mailboxes down to the limit the new organization has set for us.  I just recently migrated all of the users mailboxes to .pst's
    via a powershell script, but as you know, that only copies the data.  Is there a way via powershell to move or force all of the users data (sent/deleted/inbox) to an archive thus freeing up their mailboxes for the upcoming migration?  The new org
    will not approve the migration of any mailboxes over the 100 Mb/5000 item limit.  I'm not limiting a solution to powershell -- I will take any solution that is Microsoft-centric.  I will not be able to use third party tools or solutions due to the
    nature of my job. 

    Hi,
    Since the target domain set a policy to limit the migration, I suggest kindly let the target domain disalbe or expand the limitation for a while to complete the migration, if it is possible.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Is it possible to give a user read access to an SAP table but to restrict it to a subset of columns?

    Hi,
    is it possible to give a user read access to an SAP table but to restrict it to a subset of columns?
    Thanks,
    Digesh

    Hi Digesh,
    If your requirement is to restrict the excess to specific rows it is possible to use S_TABU_LIN, but it works only for table which contains org units, like plant, company code, etc.
    Please search for S_TABU_LIN if this is your requirement.
    Otherwise please follow Alex's suggestion.
    BR,
    Mangesh

  • Is possible to work with both Connection Pool?

    Hello,
    I would like to know if is it possible to work with both Connection Pools: Active Directory and DWH User? If it's yes, how can I specify to work with both simultaneously?
    Thank you and regards,
    Mónica.

    Hello Gayathri,
    The version is OBISE1 10.1.3.2.1
    The scenario is the following:
    I have two connection pools
    - One is mapping the DWH and it is using the System's variables :USER and :PASSWORD. Then I have an Initialization Block that get these values and I have created the logins as users in the database.
    - The other is mapping the DWH tables.
    I want to create directly users into the repository. The problem is the users of the repository cann't do the login because the first connection pool is trying to validate then against the database.
    Would be possible to validate the users against the connection pool and the repository simultaneously?
    Thank you and regards,
    Mónica.

  • Company was sent 2mg unsolicited email files to 200 users, it crashed  the messaging server

    Customer was sent 2mg emails to 200 users on their site. This crashed the
    messaging servers.
    <P>
    (See attachment)

    If you Control-click on the photos in the email before sending out you'll have the option to have it viewed as an icon rather than being displayed in the email. That may prevent them from being included in the reply.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Same oracle login for 200+user..issue if any?

    I'm in the development work for an application which would be accessed by 200+ users.
    If all the users have the same oracle login(same login name\password for connectivity to oracle server) ,would it cause any issue?If so what issue would it cause.
    Can someone throw light?
    Thanks,
    Bhagat

    If all the users have the same oracle login ... would it cause any issue?It means you cannot meaningfully audit user activity in the database. Nor can you assign different security privileges to individuals or groups of individuals. Also it makes it difficult to figure the particular user responsible for an expensive session.
    There are ways of associating a specific user identity with the a session but these are implementation specific.
    Cheers, APC

  • How is possible change an administrator user to standar via terminal?

    HI to all!
    How is possible change an administrator user to standar via terminal (unix command)?
    thanks a lot
    Simone

    Thank you Mr Hoffman!
    i have found this command:
    dscl . -append /Groups/admin GroupMembership shortname
    it's working, what do you think about it?

  • Zen Touch users (and possibly non Zen Touch users) with Firmware issues click he

    i just got back from the mall.i visited the electroworld branch from which i purchased my zen. i explained to them what my problem is, at first they recharged the player in a usb port in front of me...then they also reformatted it too...told me to stick to the firmware that came with the product..the player responded and thanked them..but hr later, it blacked out again..i came back to the store manager showed him my zen ( he couldnt deny it doesnt have a problem ) and within minutes told me...they are going to give me a replacement. (the diagnosis was AUTO-OFF). they did and im very thankful. right now im charging the new player and hoping...i mean really hoping that this zen works. because im not going to waste my time again even with that warranty. if this zen is defecti've, im gonna li've with its defect..but im going to save up for the fruit's company in my next purchase..better yet why not a new pda...i can play [size="+2"]ZEN TOUCH USERS (and possibly non Zen Touch users)!!!
    OH MY GOD
    !!! I can't believe it, but after at least 5 hours of troubleshooting, I got it to work!!
    I don't know if all of these steps are necessary or not, but this is what I did in approximately this order (I'm so excited now, I'm not even sure if this is the exact order, but I'm almost positi've this is how I did it verbatim). I really, truly hope this works for everyone else.:
    ON YOUR ZEN TOUCH:
    .) Don't connect device to USB yet
    2.) Clean Disk
    3.) Format Disk
    *Don't bother with restart firmware or reboot; these options are useless.
    ON YOUR PC:
    .) Do NOT connect device to USB yet.
    2.) I did what everyone suggested and rolled my Windows Media Player to v0 (using Add/Remove programs in Control Panel), made sure I had SP2, had the latest drivers, blah blah blah. I'm not sure if this is necessary, but I also uninstalled my Firefox WMP plugin just to be safe. :smileyindifferent:
    3.) I un-installed (using Add/Remove programs in Control Panel) and re-installed my Zen Touch drivers, both my 2.0.00 and .30.03 (.30.03 is needed ONLY if you have XP Pro 64-bit edition). I'm not sure if re-installing the drivers is even necessary, but just to be safe, let's say it is. :smileyvery-happy:
    ---THIS IS THE IMPORTANT PART!---
    4.) I plugged my device into my USB port. When it prompts you whether you want to Sync the device with Windows Media Player or Take No Action, don't ignore it and close out. SYNC IT! I made the mistake of thinking that because my firmware was corrupted and my drivers weren't recognizing my Zen Touch as nothing more than a worthless hard dri've that there was no way it would sync with WMP. IT DOES
    !!! I don't know how but it freakin' does!
    5.) Open up your firmware update file and try to update again. Mine worked immediately and updated the player within seconds!
    NOTE: As mentioned on Creative's Support page, probably the only thing they were right about, your device will no longer be compatible with MediaSource. If you want to add music, you have to do it with Windows Media Player 0's Sync page now. And for the love of god, don't update Windows Media Player! It's not worth it! Winamp is way better anyways!
    Good luck everyone! I sincerely mean that. :manhappy:
    Message Edited by invisiblephrend on 06-07-2008 :32 PMusic files in it, watch movies, save medical books etc..

    I also strongly recommend that when Windows Media Player asks you whether you want to sync automatically or manually to choose the manual option. Automatic just randomly grabs music files and could likely add?music you don't want on your device.

  • Is it possible for the end user to make changes to business processes?

    Hi
    I'm investigating Oracle's BPEL Processor Manager and BPM technologies for a large project we are going to do. The client wants to be able to change/create new business processes which would mean different web services being called in different orders after different amounts of time.
    Is it possible to allow end users to change business processes in a SOA environment with a portal using Oracle's offerings. This would eliminate JDeveloper & the designer and the need for knowledge of the underlying architecture.
    The only way around this would be getting users to edit the business rules but that would only work in a linear environment with lots of decisions won't it?
    Regards
    Sean

    I will leave your real question to be answered by product folks.
    BPEL does have capabilities that let you change how a given process will execute. For example, it's normal to have a process that will react differently depending on an incoming message (CancelMessage processes one way, SubscribeMessage does something else, ...). You can have the partnerlink that is invoked be selected based on a variable, a rule, a message element, a property in a property file or a preference set in the BPEL console. However, these all fail to answer your original question, because they require the original designer to code it all, not giving someone the capability to add a new WSDL on the fly with JDeveloper.
    You can also overlay endpoints, like if the user is in California, send to the west-coast server instead of the east coast. There is (was?) a tutorial about overlaying WSDLs.
    Andy

  • Is it possible for an end user to change application Theme?

    Hi
    Is it possible for an End user to change the theme or Font of the application.
    We have a requirement where End user should able to change color or font of application (like we do theme change in some social networking websites)
    Please provide some suggestions.
    Many Thanks
    --Vijay                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    You could:
    1. export your current theme
    2. change the exported file using a good editor and change the path
    #IMAGE_PREFIX#themes/theme_10/
    to
    #IMAGE_PREFIX#themes/theme_&THEME_NUMBER./
    and do that also with all strings related to that theme number.
    3. crete an application item THEME_NUMBER
    4. create an application computation for THEME_NUMBER to set it to a value (10) in case the value is null
    5. import the theme and make it the current theme
    6. create a link in your application which will set the value of THEME_NUMBER to whatever - 1 to 20 for the standard themes - and submit the change
    This will change the template as you specify.
    This explanation is of course simplified. Depending on the design of your application it may require considering some other details that need to be adjusted.
    Something like in this example:
    http://apex.oracle.com/pls/otn/f?p=25882:1
    The assumption is that all of your referenced classes in all css files have the same name for the same class with a leading theme number (which istn't the case in standart themes). However, this can at least give you an idea on how to proceed. I have done that with some custom themes I created and it works very well.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • Is is possible to work work with Java Threads ind WDJ 04s ?

    Hi experts,
    it is possible to work with treads in wdj 04s? I want to reder the ui in one therad and another one should read the data from serveral webservices! After all webservice cals are finished the data should be shown on the ui.
    Example:
    1. User start process -> User see the UI and a progressbar
    2. In background the wervice get the data
    3. User see the improvement
    How it is possible?
    It ist not possible withe the progress bar ui element because I always lost one second between the calls....

    Basically, you shouldn't use threads in any Application Server, since the environment is not thread-safe.
    I think there's a scheduler API in NW that would fit you best. Create your "task" as a scheduled task, happening once, and query this task using some sort of TimerTrigger.
    Would be a way easier if WDP was a bit more advanced, at least I don't see an easy way for you to do that.
    One way running J2EE 1.4 would be the use of ejbTimeout.
    Hope it helps,
    Daniel
    Edited by: Daniel Ruiz on Dec 3, 2009 2:24 PM

  • Require to configure CUCM and Gateway router PRI for 200 users

    Hi all,
    My current scenario is like this:
    We have two CUCM servers(7.1) in reduandancy. One is publisher and other is subscriber. We have a gateway router 2921 with a single PRI card. We have 200 IP Phone users. Currently the problem is we have only 30 telephone lines. So with the help of DID configuration. We assign thirty ports to thirty users. Now these thirty users are able to to make an outbound call and recieve an Inbound call. Now I also want to create a pattern in which we dedicate 10 channaels for other 120 users to make an outbound call. And restrict 50 users to not make an outbound call. So we require such a scenario.
    Total 200 Users:
    1. First 30 users. Able to make an outbound call and also able to recieve an inbound call.
    2.  Next 120 Users. Able to make an outbound call. But not able to recieve an inbound call because of PRI restriction. Because we only have a thirty numbers. Dedicate 10 channels for them.
    3. Last 50 users. Not able to make an outbound call. And also not able to recieve an Inbound call.
    So I need a configurations of Gateway router and PRI. And also of CUCM in which we could define such a pattern.
    Regards,
    Ali Raza

    Ali,
    The outbound call restrictions can be implemented using the CUCM Calling Search Space configurations.  A basic example to illustrate:
    Partition 1:  internal_pt   (only internal patterns)
    Partition 2: phones_pt (ip phones on your network)
    Partition 3: pstn_pt (off net patterns/external)
    CSS1: Offnet_css
    internal_pt
    phones_pt
    pstn_pt
    CSS2: Onnet_css
    internal_pt
    phones_pt
    You place all patterns that can reach off net in "pstn_pt". Phones that are using CSS2 cannot reach off net.  The above example is leveraging the device CSS for all call routing decisions.Using this approach, you would assign "onnet_css" to phones that can only dial internally. NOTE: I am just using a basic example here and not suggesting you use this PT/CSS config "as is".
    There is another approach where you "allow" all patterns on a device and "restrict" on the line. For example:
    Partition 1:  internal_pt   (only internal patterns)
    Partition 2: phones_pt (ip phones on your network)
    Partition 3: pstn_pt (off net patterns/external)
    Partition 4: block-pstn_pt (blocking patterns for pstn)
    CSS1: AllPhones_css
    internal_pt
    phones_pt
    pstn_pt
    CSS2: restrict-pstn_css
    block-pstn_pt
    Again, pstn_pt contains all pstn patterns.  The block-pstn_pt would also contain off net patterns. The difference is that in the block-pstn_pt all patterns would have the "Block this pattern" flag enabled. All phones would have a Device Level CSS of AllPhones_css.  Phone lines where you wanted to restrict off net dialing would have a Line Level CSS of restrict-pstn_css.
    Just a quick refresher, when a phone LINE goes off hook to dial the CUCM is using the "Line Level CSS" + "Device Level CSS" to make the routing decision.  So, assume Line 1 on Phone A has restrict-pstn_css and the phone Device Level CSS is AllPhones_CSS. The Effective Search Space is:
    1. block-pstn_pt
    2. internal_pt
    3. phones_pt
    4. pstn_pt
    So, if we assume that block-pstn_pt contains patterns that override patterns in pstn_pt then you can effectively block off net access to Phone A, Line 1.
    Why would this be a good approach?  Well, what if you had a need to restrict Line 1 on Phone A but allow Line 2 on Phone A.  Using line level restrictions is much more flexible. Especially if you have more than 2 options you need to consider.
    As far as inbound restrictions. If a phone line doesn't have a DID then you have achieved your objective.
    The part I can't answer is reserving 10 specific channels for one group of users. I do not believe this is possible.
    HTH.
    Regards,
    Bill

  • Work Flow Users

    How can I exclude administrators from work flow users choise list?
    Thanks

    This is not possible, simply because admin users have access to all application features (except delete the application).
    Might be worth checking with Support if an enhancement has been logged.
    I agree it would be nice to have an option you can switch on and off.
    Seb
    www.capiotech.com

Maybe you are looking for