BPE_ADAPTER error

Kindly help in this regards.. its a file to file Bpm collect message scenario
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

can any one help me out wat the error is... i cross checked my
message interfaces and recevr and interface determination all are mentioned rite... could u please help out...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>66CF66D6-077B-4ED2-0AC9-D44FEB6F67E9</SAP:MessageId>
<SAP:TimeSent>2009-03-12T11:55:35Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>BS_Bpm_file</SAP:Service>
<SAP:Interface namespace="http://capgemini/mumbai/upgrade">BpmPatternCollectIfToBeCollected</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>BPMPatternCollectMessage</SAP:Service>
<SAP:Interface namespace="http://capgemini/mumbai/upgrade">BpmPatternCollectIfCollected</SAP:Interface>
<SAP:Mapping notRequired="X" />
</SAP:Receiver>
<SAP:Interface namespace="http://capgemini/mumbai/upgrade">BpmPatternCollectIfCollected</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2009-03-12T11:55:35Z" wasRead="false">
<SAP:Engine type="AE">af.xi1.inbomsap11</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
<SAP:MessageId>66CF66D6-077B-4ED2-0AC9-D44FEB6F67E9</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
- <SAP:Hop timeStamp="2009-03-12T11:55:36Z" wasRead="false">
<SAP:Engine type="IS">is.00.inbomsap11</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>66CF66D6-077B-4ED2-0AC9-D44FEB6F67E9</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2009-03-12T11:55:37Z" wasRead="false">
<SAP:Engine type="PE" />
<SAP:Adapter namespace="http://sap.com/xi/XI/System">PE</SAP:Adapter>
<SAP:MessageId>66CF66D6-077B-4ED2-0AC9-D44FEB6F67E9</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
</SAP:HopList>

Similar Messages

BPE_ADAPTER error on async BPM

I am trying to build the Collect Time-Dependent scenario in BPM and I'm getting a BPE_ADAPTER error. This is our first attempt at using BPM. The error says Unknown_Message, "No object type found for this message" and is part of category XI Adapter. I am trying to receive an IDoc, map it to a file structure, and append the file structure to a list. After a set time period has elapsed, I want to FTP the collected data file to the destination. I deleted everything from the process except the receive and send steps and I still get the error. It appears to be happening in the Call Adapter step in the XI pipeline. Any idea what could be wrong?

Hi Lisa,
There is one more SAP note which talks about this SWF_STRING stuff.....but i dont remember the OSS note number now. I will get it for you on monday.
Try the following:
Select your integration process from SXI_CACHE and click on the "activate" button.You will be navigated to the next screen. In this second screen, there will be an option to "delete" this process. Delete it.
Then make a change to your integration process in repository say for e.g. add and remove description.And Save and activate it.
Now check the status of the Integration process in SXI_CACHE to see whether the return code is 0.
Let me know how it goes.
Regards,
Sridhar
Message was edited by: Sridhar Rajan Natarajan

BPM - BPE_ADAPTER errors

I am trying to follow Arpit's blog for the RFC Scenario using BPM --Starter Kit
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
I am getting the following error in Call adapter
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:Stack>No object type found for this message; check the activation of the corresponding process</SAP:Stack>
Also something very curious is that my Interface determination, shows the receiver interface same as my sender interface.. But my receiver determination in ID is configured correctly... SXI_CACHE has '0' for my IP.
- <SAP:Sender>
<SAP:Service>BS_SEND_SERVICE</SAP:Service>
<SAP:Interface">FileRequest_OUT_MI</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>File_RFC_BP</SAP:Service>
<SAP:Interface namespace="xxx">FileRequest_OUT_MI </SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="xxx">FileRequest_OUT_MI</SAP:Interface>

Check the following links.
BPE_ADAPTER error on async BPM
https://websmp105.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf

Error: BPE_ADAPTER Message not used in any process

Please help me fix this error.
My scenario is i have a bpm process for merging three files.
and i configured in this way..
merge the three files into one and send into SAP
i have three communication channels (file adapter) for three files
one communication channel xi adapter for a proxy into sap.
using these files as input to BPM process
then using BPM process as sender to the proxy reciever
I am getting error from sxmb_moni in xi box
as error category:BPE_ADAPTER
error id: message_not_used.
it says message not used in any process.
please help me correct this problem..
thanks
jp

JP,
Are u sure there is nothing wrong in your design part? Also Are u using Fork to receive 3 files parallely, If yes then all the 3 files has been checked for start process? Can u confirm this.
Also in the Inerface determinations did u gave abstract interfaces that BPM is recieving?
Best regards,
raj.

Error in file2file with bpm

iam trying to do file2file scenario with bpm
file is picking up from input and does not put in output.
adapters is working fine for this.
i got an error that "no object found for this message"
in sxi_cache return code is 99
in swf_customizing----
there is some error in like "error loading hr control data".
where it went wrong.plz provide solution.

Hi,
First do the Cache refresh and then try it once.
Go throgh the following links , it may solve your problem
BPE_ADAPTER error on async BPM
BPM (IP) Error: "No object type found for this message [...]"
No object type found for this message
Regards
Sridhar Goli

BPM Error as MESSAGE_NOT_USED

Please help me fix this error.
My scenario is i have a bpm process for splitting three files.I mean here i will get the data in single XML file but we have to map to multiple interfaces and post the data inthese interfaces to SAP R/3. please remember that sender is only one service and receiver is also only one service.but the receiving interfaces are multiple.
here i am having one communication channel for sender service.
one communication channel xi adapter for a proxy into sap.
then using BPM process as sender to the proxy reciever
I am getting error from sxmb_moni in xi box
as error category:BPE_ADAPTER
error id: message_not_used.
it says message not used in any process.
please help me correct this problem..
here i have created 1 sender agreement, 4 receiver determinations, 4 interface determinations, and 3 receiver agreements.
i searched forums for this error solution . and i searched my configuration as per the suggestions. the SXI_CACHE return code is '0' only . i searched for syntax errors in integration process there it is fine . i tested my scenario in test configuration ,there also it is fine .
please help me in this issue.
thanks
RAMANA

Ramana,
Refresh the Cache. If it doesn't helps check whether the outbound interface and the BPM receive step interface must be same.
Reply back ur findings!!
Best regards,
raj.

Error in Trace Level: could not create BPE proxy for message, no XML objec

Hi
We are doing a scenario of File to RFC using BPM and I am getting this errror in Tcode SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message; check the activation of the corresponding process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
And getting this error in Trace level
could not create BPE proxy for message, no XML object definition found for message EB32BB50610A11DC9648001321CB837D
Why this error occurs?
What could be in error?
Thanks in advance
Regards
Sami Qureshi

Hi Sami,
Check if thse threads can help u,
Error in BPE Adapter
BPM - BPE_ADAPTER errors
BPE Adapter Error
Exeception during execution error
***********Reward points if helpfull************

Error in trace log - Error in Mapping EngineODIException

Hi,
in the trace log file of OID i am getting the following error:
Trace Log Started at Mon Sep 24 08:56:34 CEST 2007
c360f8d929b0427faf0c332e05e78025_85bf9c6eeeec452c8a41c3ab23d03fc6 - Error in Mapping EngineODIException: Exception Connecting to DB :java.sql.SQLException: ORA-01017: invalid username/password; logon denied
ODIException: Exception Connecting to DB :java.sql.SQLException: ORA-01017: invalid username/password; logon denied
     at oracle.ldap.odip.gsi.DBConnector.connect(DBConnector.java:134)
     at oracle.ldap.odip.prov.ProvWriter.initialise(ProvWriter.java:113)
     at oracle.ldap.odip.engine.ProvThread.mapInitialise(ProvThread.java:642)
     at oracle.ldap.odip.engine.ProvThread.execMapping(ProvThread.java:559)
     at oracle.ldap.odip.engine.ProvThread.runOldVersion(ProvThread.java:543)
     at oracle.ldap.odip.engine.ProvThread.run(ProvThread.java:173)
java.lang.NullPointerException
     at oracle.ldap.odip.gsi.DBConnector.end(DBConnector.java:210)
     at oracle.ldap.odip.engine.ProvThread.mapEnd(ProvThread.java:718)
     at oracle.ldap.odip.engine.ProvThread.runOldVersion(ProvThread.java:546)
     at oracle.ldap.odip.engine.ProvThread.run(ProvThread.java:173)
java.lang.NullPointerException
Exception in Provthread
It started since I changed password of PORTAL schema.
everything works but i am wondering what's going on because trc file is now full of those messages
thanks,
Branislav

Hi Sami,
Check if thse threads can help u,
Error in BPE Adapter
BPM - BPE_ADAPTER errors
BPE Adapter Error
Exeception during execution error
***********Reward points if helpfull************

Error in Business process

Hi,
I got a error while sending data from HTTP client to BPM.
Message details
Inbound channel : Plain HTTP
Outbound channel : PE
error category : BPE_ADAPTER
Error Code : UNKNOWN_MESSAGE
plz. help me out..
thanks in advance.

Hi,
Pls check these things
- in transaction SXI_CACHE, the BPM has a return code of 0(which means it is active)
- in the http query string, you have all the required parameters, like sender service, interface name, namespace ...
- the namespace in the actual payload and the definitions are the same...
hope this helps...
Thanks & Regards,
Renjith

BPM error : No Work Items Exist

With reference to the BPM related weblog
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1822. [original link is broken] [original link is broken] [original link is broken]
My input file is picked by sender communication channel, but have not reached on the receiver. In SXMB_MONI_BPE, I selected my service and tried to execute, the message is "No Work Items Exist".
Any suggestions on this....

Hi,
Go to SXI_CACHE and check the status of your BPM. The return status of your BPM should be 0 . If not, try to activate your BPM from there.
Also, do a semantics check on your BPM by pressing f7. It will display any semantics error if any.
chk out these threads wher the same issue is being referred
Re: No object type found for this message
BPE_ADAPTER error on async BPM
Thanks
Swarup

Problem in simple filetofile scenario with BPM

Hi
I am a starter to XI. I am implementing simple file2file scenario with BPMs.
But I am getting error while looking into SXMB_MONI.
Under "Monitor for Processed XML messages"
Number of XML message Found 3 (which is my input 3 xmls which is fine) but
"Status is RED Flag".
"Error Category: BPE_ADAPTER"
"Error ID: UNKNOWN_MESSAGE".
Please help me out with this problem.
Regards
Sam

Hi Raj,
When i click PE getting following error:
"Unable to perform action for selected message".
When i double click the row, it takes me to xml message versions where i can RED FLAG for "Call Adapter". In the trace i foudn the below at the end:
<trace level =1 type=system error> error exception return from pipeline processing"</trace>
Hope this helps to guide me mroe
sam

Check list for BPM

Plesae share docs, links which would give the information about troubleshhoting for BPM or the check points..

Hi,
Check these links,
Walkthrough with BPM
Problem with BPM Configuration
Business Process Monitoring - Error on Monitoring type
Re: No object type found for this message
BPE_ADAPTER error on async BPM

UNKNOWN_MESSAGE - BPM

Hi,
   I have created a simple file to file scenario by using BPM.
   After activating the changes, the file is picked up from the source folder but it is not moved to the destination. In the adapter monitor, I am seeing this error message. "UNKNOWN_MESSAGE"
   I have followed the steps prescribed in the following thread, but no use.
   [BPE_Adapter Error;
   I have checked this scenario by using SXI_CACHE. The return code is 99 for this scenario. After reactivating it the return code become 2. I think it should be 0.
   Please help me to fix this issue. Thanks in advance.
Regards,
Vivek LR

Vivek,
Please check whether you have defined abstract interfaces for all the interfaces used in the BPM.
Use Function Key 'F7' to check if your BPM is syntactically correct before activating the same.
Yes, you are right in that the return code has to be 0 in SXI_CACHE...99 would indicate an error of some kind. But if the check with the F7 key returns no errors, then the SXI_CACHE status would be fine.
Thanks,
Anand

BPE doesn't activate XML Objects and Workflows

Hi all.
I have created some BPE Processes. The all are active and with status 0 in transaction SXI_CACHE.
The odd thing is, when I trigger messenges the BPE_ADAPTER error 'No object type found for this message; check the activation of the corresponding process' pops up with a statement in the trace: 'could not create BPE proxy for message, no XML object definition found for message...'.
I have checked the objects, the Proxies are created, what is missing are the Workflows and the XML Objects.
When I access the the XML Object the message is a green 'Definition <XML Object Name> not available', it is created though.
I created a similar process a month ago. This is running perfectly. The system is a 640 on SP17. How can it be that the object generation at activation is incomplete?
Thanks in advance for your help.
Jens

Jens,
I have experienced the same exception while using BPM. I tried to debug in all ways and could finally solve it.
In case of BPM, receiver determination to be configured to set receiver as BPM. If you do mistake while configuring inbound interface (it should be abstract interface) under interface determination then you get this type of exception.
I suggest you to to check the receiver determination and interface determination configuration again.
Regards.

First Foray into BPM, please advise

Hi,
I am trying to work through a basic BPM setup, because the process is going to get more complicated. So, I decided to take the basic process that does not require BPM and put it in a BPM. The reason is that I will be receiving syncronous PO confirmation in the future and will have to use BPM for this extension on the basic PO to vendor scenario. How does the steps below look. I am struggling with the ID setup more than the IR development.
IR
1) Created abstract MI's for the Orders IDOC and the outbound message format XCBL30
2) Created an interface mapping between the two abstract interfaces(is this needed?)
In BPM Design:
1) Created two containers based on each abstract interface
2) Created a recieve step and assigned the abstract interface associated with the outbound IDOC
3) Created a transformation step, the source being the abstract IDOC interface and the target being the outbound XCBL abstract interface, choosing the IM created above.
4) Created a reciever list container and step using the inbound abstract interface(IS THIS NEEDED??)
5) Created a send step for the outbound XCBL abstract interface
In ID
This is where I get confused, what steps are needed here?
1) Assigned the process as a service for my party
2) I tried to create a receiver determination this way:
A) The sender interface is the IDOC TYPE ORDERS05, the
     abstract interface is not allowed here.
B) I choose the Integration Process as the receiver
C) For the interface determination, the inbound
     interface is the abstract interface for the IDOC.
     NO MAPPING is chosen(Is this correct???)
D) A receiver agreement is not allowed for the
     integration process, so I created a receiver
     agreement for the normal XCBL message, not the
     abstract one.
Questions:
1) How do the steps above look, any ideas?
2) I tried to run it and got a BPE_ADAPTER Error
   "Unknown Message"
Thanks,
Chris

Hey,
So this is my "new" plan of action for the directory steps
1) One receiver determination where, the R/3 system and the IDOC are the sender service and interface. The business process is the reciever.
2) One interface determination where the abstract interface is the inbound interface for the above determination. No mapping is specified and no receiver agreement is required.
3) One receiver determination where, the business process is the sender service and the outbound abstract interface is the sender interface.
4) One interface determination where the inbound interface is the xCBL message, no mapping is specified.
5) One reciever agreement, where the communication channel is specified for sending the message to the vendor.
I will let ya'll know how it goes! Any other feedback is appreciated! The SXI_CACHE is return code 0. So I think my problem is in the ID confige that I am about to change.
Thanks Alot,
Chris

BPE_ADAPTER error

Similar Messages

Maybe you are looking for