BPM Linking of two receivers?

I have a BPM process and I need to link the two receivers. I have the first message coming into the Process through Asynch Adapter (JDBC) the second Receive is not kicking off.
Is there something I need to do to link the two Receive steps, using the adapter config or something else?

Hi,
Your first receive step is using JDBC Adapter. Which adapter is ur second receiver step using? Is it file or again JDBC adapter?
I tested with two receivers in BP (both are file adapters). When i drop both files at a time (both having a polling of 1sec), the first receiver picks up the files and second receiver just shows the status as waiting. If i drop the second file after putting the first file then it works fine.
so i think some problem in the triggering of the second message. So try trigging the first receiver msg..wait for some time and try trigger the second file. (make sure that your correlation condition matches the input msg)
rgds,
Sasi

Similar Messages

Send the same message to two receivers with some time difference..

Hi
I want to send the same message to Two receivers with the slight time difference.. becuase but not at the same time.. if the same time means.. just we can specify the two receivers in the one receiver determination..
but if i want to send the same message to Two reveivers with the time difference means..(after sending the message to first receiver.. after some time gap.. i need to send the message to second receiver..
this type of scenarios how can we do.. is it possible to do with out BPM... please suggest me the solution..
Thanks
Jain .P

Hi Jain,
With BPM you can easily do it.
i am giving you the steps:
1)first add a receive strep to get your message
2)then, put a receiver determination step with a multiline receiver container element assigned to its Receivers property.
3)then, put a block in dynamic mode(ie. ForEach/ParForEach mode) and assign the multiline receiver container element to its multiline element and assign a simple(single line) receiver container element to its current line property.
4) add a send step within the block, choose Receivers List in its Receiver From property and choose the current line receiver element in its Receivers property.
5) then add a wait step in the BPM, in its type select Wait Specified Time Period and then mention the duration in your desired time unit.
**Reward points if helpful...
--Sankar Choudhury

One Sender system (sync) and two receivers system(Sync) . Pls help

Hello All,
For one Sender system (sync) and two receivers system(Sync)
as I am using BPM for it.
CRM sender system (RFC)
DM (RFC) and ERP Receiver systems (RFC)
Pls let me know
In Receive there is only two mode
1. Async
2. Open S/A bridge
So do i need to choose Async mode for sender RFC.
Pls tell me the BPM flow steps for my scenario
Regards

Use Open S/A bridge
The scenario could be done wihtout bpm. Ur requirement is not clear but here could be the steps. Steps.
Receive
Sync send
Sync send
Async send
Regards,
Prateek

One Sender system and two receivers system scenario. Pls help

Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
Pls tell me and send me links/docs for this scenario.
Regards

Hi Rick,
For two receivers you require 2 interface determination, receivers determinations etc.
Go through these threads for one sender and multiple receivers:
one sender and two receiver
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
Then configure your RFC communication channel in XI system + activate it and after that using all same parameters make an TCP/IP RFC destinatioon on R3 side.
Rewrads if found helpful.
BR,
Alok

I have One Sender system and two receivers system scenario. Pls help

Hello,
I have One Sender system and two receivers system scenario.
My sender is RFC (sync) in nature.
My one receiver is RFC (sync) in nature.
My second receiver is RFC (sync) in nature.
How to proceed with this.
If my second receiver is async then how to proceed with this.
Regards

Hi Rick !
Depending on your requierements, you can create a BPM that
1) receives request from sender
2) sends request to receiver 1 / receives response from receiver 1
3) sends request to receiver 2 / receives response from receiver 2
4) do some processing with both responses
5) sends response to sender.
If your second receiver is async, just use an async send step in step 3. As far as I know, you cannot use multimapping with sync scenarios.
Regards,
Matias.
ps: please award points if helpful

MDM to JDBC two receivers

HI Team,
We need to create a scenario with MDM to JDBC having two receivers one for insertion and another for updation.
Could anyone give me suggestion on how to proceed futher.
Thanks & Regards,
Ranganath.

Hello,
We need to create a scenario with MDM to JDBC having two receivers one for insertion and another for updation.
It depends on your requirements:
1.) Do you need the response from the update/insert? If yes, your scenario would be synchronous and you would be unable to use multi-mapping or multiple receivers without resorting to BPM. If no, then you can go through the suggestions by the posts above.
2.) Are the receivers the same or different systems?
    a.) Same system, sync mode - this would proceed as a normal sync scenario
    b.) Same system, async mode - use multi-mapping as suggested by Santhosh/Raja
    c.) Different systems, sync mode - You would need to maintain two scenarios here since multi-mapping or message split cannot be used. Otherwise, go for BPM
    c.) Different systems, async mode - use receiver determination for the split and then standard interface determination as was suggested by Baskar/Grzegorz
3.) What is your update/insert logic? e.g if the data is existing you will just update and if it is not then it will insert? If that is the case, you can use the UPDATE_INSERT statement
http://help.sap.com/saphelp_nwpi711/helpdata/en/44/747eda12dd3676e10000000a114a6b/frameset.htm
Or if the statement is complex, use SQL_QUERY
Hope this helps,
Mark

Change or delete the docflow link between two existing documents

Hi All,
Is there any FM or soulution to change the doc flow link between two documents .
For ex .. i have document A and document B , and created a doc flow link from A to B , Now i have to change the succeeding document to C
I have tried to modify the doc link ,but its not working using crm_order_maintain.I thought of deleting the link between A and B and then create a new link Between A and C , but deletion of link bewteen A and B is also not working.
I have checked with FMs CRM_DOC_FLOW_DELETE_CHECK_EC and CRM_DOC_FLOW_DELETE_EC, followed by CRM_ORDER_SAVE AND COMMIT . i could not find any exception from this FMs , but still the doc link is not deleted.
Pls share if you have any suggestions.
Regards,
Nithish

Hello
I wrote a report to delink items from document flow. I uploaded it [here|http://wiki.sdn.sap.com/wiki/display/CRM/Removelinksfromdocumentflow].
Please, use with caution and always perform careful tests before you run it in a production envinronment.
Hope it helps
Joaquin
Edited by: Joaquin Fornas on Nov 15, 2011 11:49 AM

View Link between two query views

Hi is it possible to create a view link between two views having the where clause bind variables.
How you set the bind variables at the run time for the View objects. It is giving hard time for me to use the Master view in the XmlData bean to generate the Xml document.
I am able to set the Master views bind variables, but for view link destination view
where clause bind variables are not able to set ( link object link condition bind variables are binded run time but the views where chause bind variables of destination view are unable to setand bind)
Thanks
null

Easiest way to do this is to add additional transient attributes to your master view object, and then include those additional transient attributes in the list of source attributes for your view link. This way, you can get BC4J to automatically refer to their values with no additional code on your part.

Dynamic link confusing two separate AE compositions in PPro from different projects

I am using CS5 Master Collection for Windows 7 (64 bit) on an HP Pro desktop (Intel core 2 duo, 6Gb RAM). The tower has two hard drives installed (no RAID). CS5 is installed on the original C drive along with the OS, but the working files, footage etc are all on the larger, secondary F drive.
I am working on a DVD project consisting of several seperate PPro projects. Each project has been colour corrected in AE using dynamic linking. Recently two of my projects suddenly became mixed up, by which I mean the video (not the audio) from one AE composition in one project has taken the place of another in another project. The clip remains the same length, but the link apears to be referencing the wrong clip during playback. Interestingly, there are two clips on the track above the affected clip that fade out and in at either end, during the dissolves between clips, the correct footage plays. It is only when the clip plays by itself that the problem occurs. The next clip also has the same error, though the problem only occurs for half the clip and then suddenly corrects itself. Just to be clear, All clips have been rendered, there are no more than two video tracks on the sequence, and I have tried replacing the composition from the asset menu (in which the clip plays back correctly), but the problem remains in the sequence.
I hope that descrition is clear enough. My guess is some kind of file path error in the dynamic link, perhaps due to the separate hard drive. But I really wouldn't know. I'm very pressed for time right now and I'd prefer not to go against workflow and re-edit a new composition in AE, I would also like to understand what is going on in case it happens again.
Any help with ths problem would be appreciated,
J

Thanks Colin, I tried what you suggested with both the AE Project that it should be referencing and the AE project it is erroneously referencing but both failed to fix the issue. Its as if a hidden clip were laid over the top of the one I want to play. Frustrating.
Date: Mon, 24 Oct 2011 19:47:03 -0600
From: [email protected]
To: [email protected]
Subject: Dynamic link confusing two separate AE compositions in PPro from different projects
    Re: Dynamic link confusing two separate AE compositions in PPro from different projects
    created by Colin Brougham in Premiere Pro CS5 & CS5.5 - View the full discussion
It's not the comps that are the problem; it's the project file names themselves. You can have all the comps in a project named the same thing, and it'll be fine, but naming projects incrementally is an issue. After Effects includes a versioning function (Save and Increment) that will create a new AE project file with a serial number, e.g. AE Project 01, AE Project 02, etc. This is all well and good if you're just working in After Effects, but Dynamic Link gets confused and will usually start looking at the later project file for comps. That will just create a big mess, as you've found. Changing the names of the project files won't help things relink automatically properly, but it can help you fix things. Make all your DL AE comps offline in your Pr projects, and name your AE projects in a manner that is not serial (give them more random names). Select your offline AE comps, and right-click > Link Media, and point to the new AE project. Things should link up correctly then--but if they don't, you'll just have to remove all the AE comps from your Pr project, reimport the comps from the newly-named AE project, and replace them. It's a pain but it'll probably just keep getting worse if you don't.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3988711#3988711
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3988711#3988711. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5 & CS5.5 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Hello, I want to perform a simple task. I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage

Hello, I want to perform a simple task.I have two Adobe ID accounts linked to two different email addresses. One account i do not want to use anymore but it is linked to my main email account. the account i do not want anymore is still in its free stage and i have not purchased anything with it. My other Adobe ID account is linked to an email i rarely use and don't particularly want to use. i have tried changing the linked email account to my regular one i use. But it obviously does not allow me because of it already being linked to my other non used obsolete Adobe ID account. Is there any solution to this?? Please help.

Adobe contact information - http://helpx.adobe.com/contact.html may help

Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

It is not possible to do that.
Allan

Possible to link the two tables?

Dear All,
I am currently trying to create a report where the user will enter in the customer code and then using discounts on item groups to create a sales price (list price - customer discount = sales price). I'm currently trying to do this in crystal reports but I just can't seem to get the values.
The problem I have is the OITM.Itemgroupcode is of type number (from the item table) where the OSPG.ObjKey is of type string (this represents the itemgroup code in the Discount table). Because of the different types I cannot link the two fields. If they were the same then it should be easy but I can't seem to get around this.
Does anyone have any idea of what I could do to resolve my issue, while I am trying to do this with crystal currently I'm not locked into using this platform.
Any help and comments are much appreciated.
Troy

Hi Troy,
Welcome you post on the forum.
Try this to start:
SELECT T0.ItemCode, T1.CardCode, T1.Discount
FROM OITM T0
INNER JOIN OSPG T1 ON CAST(T1.ObjKey AS INT)=T0.ItmsGrpCod
WHERE T0.ItmsGrpCod like '[%0\]%'
If you get result, you can create a Command for your CR report.
Thanks,
Gordon

BPM was Picking two files but it was not processing 2nd file data in target

Hi all,
I have designed scenario for picking two files and i want to merge this files into single structure and send it target.when i am try to testing my bpm was picking two files but it is processing only file it went target system.i have steructe for source like
source1     target
root        header
a           item 0 to unbounded
b            a
c            b
             c
source2     item1 duplicated structure
a            a
b            b
c            c
i am getting two source files with the same structure but i have to map it one target structure and i want to map both source fileds to one target structre under item node so i was duplicated item node and mapped a b c fields from both(2 source structures).while testing BPM is picking two file bu in the target i am getting only first file data under item node,whatever i mapped with duplicate structure with second file i am not getting into target file(target is standard proxy structure so cant' create new one item node in that occurance is 0 to unbounded thats y i duplicated node while testing interface mapping its working fine).can anyone suggest solution for this problem.
Thanks,
Seshagiri.

Hi,
In BPM follow the below steps and hopefully your problem will be solved.
1.     Configure one sender CC to get the files from your application server, once the files hit the BPM now you need to
                     configure your BPM accordingly.
2.     Use the Receiver step in BPM to receive the messages. Use the correlation step to get the correct files.
3.     Use container and append the files, so both the files will be append, this means the message content will
                     have 1header, body, footer, 2header, body, footer.
4.     If you want to split the message to different receiver then use the fork step else leave it.
5.     Use the transformation step, the transformation step will call the message mapping. Provide the correct message
                     mapping.
6.     Now use the sender step to send the message to the receiver-target system. In this step use the split value for each
                      concept if you want to generate two different files.
7.     Configure 1 receiver CC to generate both the files.
Hope this helps.
Cheers,
Jay

Linking between two workspaces

Good afternoon all,
I was wondering if there was anyway for me to link between two workspaces on the same schema.
What I currently have set up is two workspaces (1 and 2). I have done a lot of work on 1 and built a Single Sign On application to manage my applications. Workspace 2 was created for a separate team, but I would like some sort of authentication. I was wondering if there was anyway for me to leverage my existing app in Workspace 1 to authenticate for applications in Workspace 2.
My guess is that it's not possible, but I figured I might as well ask around to see if there is some weird hack around it.
Thanks in advance,
Ivan

Alright I'll post it on there. Figured that InDesign users would know more about the links and how to set them up. Thanks for the advice.

BPM startting with two IDoc Types

Hi All!!
I have designed a BPM starting with two IDocs (MATMAS05 y CLFMAS02). Is designed with two start process in a switch. When one comes, wait a minute for the other. I'm not sure what IDoc comes first to the process, the I can lose data.
Somebody has any idea tto encapsulate the infornmation of the 2 IDocs without a ZIDoc?
Thanks and regards,
Manuel Míguez.

Hi,
sounds like a
> Collecting and Bundling Messages - Multiple Interfaces
scenario like described here:
http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/frameset.htm
Regards
Patrick

BPM Linking of two receivers?

Similar Messages

Maybe you are looking for