Bpm process deployment problem

Hi,
I have installed OracleBPMEnterpriseWL103100_aix.bin successful.Also i have installed the obpmadmcenter in a weblogic10g domain successful.
But when i go to the workspace to release the bpmprocess,it show the errors as list:
Runtime exception Shell.
Context details :
Process '/MOBILEPBXCHANGE#Default-1.0' could not be started up
Apparent cause :
Unable to connect to the Directory Service. If the problem persists, contact your system administrator.
Original stack trace follows ...
fuego.directory.exception.DirectoryNotAvailableException: Unable to connect to the Directory Service. If the problem persists, contact your system administrator.
Who can help me,please.
Thanks.
Edited by: user8686481 on 2009-12-7 上午1:13

It sounds like you have connection details wrong. The directory service refers and the database. Check your database, make sure its up and running, make sure your connection details are correct, user / pass, permissions, etc.
If all else fails, restart the database, then the bpm engine.
HTH
-Kevin

Similar Messages

Intelligent Even Processing deployment problem ; JBI module

At the time deploying one Java Composite Application which has one IEP (Intelligent Event Processing ) module as a JBI module.
It shows error like -
IEPSEaja02047: Fail to create table with: CREATE TABLE ems_processing_state_0 (processing_state blob,prev_timestamp_to_check TIMESTAMP,prev_timestamp_to_process TIMESTAMP)
Can anyone help in this ?

Hello Parth,
Do you know in what situation this error occurs? Does the server.log have an errors? Is this the first time you are deploying the project?
In future, please use the Open ESB User's mailing list for questions on IEP - https://open-esb.dev.java.net/MailingLists.html

BPM Process deployed but not listed in Applications in BPM Workspace

Any idea on this? It seems to be deployed correctly based on the JDeveloper logs, and it seems I've set the organization settings to include the user/s I'm testing with. Have I missed something?

Check either roles and participants correctly created and assigned

How to find out what is causing an error in a BPM process

I have a very basic question and I can't figure it out from help.sap.com
I have a BPM process deployed to a SAP NW Java BPM 7.40 system. It can be triggered with a web service call.
It goes into error immediately. I go to NW Administrator > Operations > Process and Tasks > Manage Processes and see the process with status "Error". But the "Error log" tab below is grayed out. I can't see any error message anywhere.
How do I find out what is wrong?

Ah, I didn't notice that on the history tab I can switch from Basic to Medium or Advanced, in Basic it was showing nothing. In Medium and Advanced it shows:
Mapping failed
com.sap.engine.services.jndi.persistent.exceptions720.NameNotFoundException: Object not found in lookup of test.sap.com.polreuse.ejbs.UUIDProviderLocal.
java.lang.IllegalArgumentException: Could not lookup 'test.sap.com/bpmear/LOCAL/UUIDProvider/test.sap.com.polreuse.ejbs.UUIDProviderLocal' bean
com.sap.mapping.lib.execution.api.exception.TExecutionException
at EJB::test.sap.com/bpmear/LOCAL/UUIDProvider/test.sap.com.polreuse.ejbs.UUIDProviderLocal( StandardInvocation:invoker )
at ( DeepExpression )
at UUID( TerminalPart:expression )
at result( BroadPart:child )
at ( NarrowMapping )
at com.sap.mapping.lib.execution.implementation.Compiler$StandardMappingFunction@241ade69( StandardInvocation:invoker )
at ( DeepExpression )
at MessageHeader( TerminalPart:expression )
at http://sap.com/xi/SAPGlobal20/Global:NewLBrdngFSCreateRequest( BroadPart:child )
at ( NarrowMapping )
What could this mean? I didn't deploy all parts correctly or something like that?
Also, where do I check the default trace?

Cannot deploy BPM process from JDev into remote weblogic server

Hi all,
I have in a trouble!
I've built a simple BPM process but when i deploy it from JDeveloper to a remote weblogic server it have following error, pls give me solution
[02:16:27 PM] ---- Deployment started. ----
[02:16:27 PM] Target platform is (Weblogic 10.3).
[02:16:27 PM] Running dependency analysis...
[02:16:27 PM] Building...
[02:16:31 PM] Deploying profile...
[02:16:31 PM] Updating revision id for the SOA Project 'Project1.jpr' to '1.0'..
[02:16:31 PM] Wrote Archive Module to C:\JDeveloper\mywork\TestDeploy\Project1\deploy\sca_Project1_rev1.0.jar
[02:16:31 PM] Running dependency analysis...
[02:16:31 PM] Building...
[02:16:33 PM] Deploying 2 profiles...
[02:16:33 PM] Wrote Web Application Module to C:\JDeveloper\mywork\TestDeploy\Project2_UI\deploy\Project2_UI.war
[02:16:33 PM] Wrote Enterprise Application Module to C:\JDeveloper\mywork\TestDeploy\deploy\TestDeploy.ear
[02:16:33 PM] Deploying sca_Project1_rev1.0.jar to partition "default" on server AdminServer [http://HP:7001]
[02:16:33 PM] Processing sar=/C:/JDeveloper/mywork/TestDeploy/Project1/deploy/sca_Project1_rev1.0.jar
[02:16:33 PM] Adding sar file - C:\JDeveloper\mywork\TestDeploy\Project1\deploy\sca_Project1_rev1.0.jar
[02:16:33 PM] Preparing to send HTTP request for deployment
[02:16:33 PM] Creating HTTP connection to host:HP, port:7001
[02:16:33 PM] Sending internal deployment descriptor
[02:16:33 PM] Sending archive - sca_Project1_rev1.0.jar
[02:16:33 PM] Received HTTP response from the server, response code=503
[02:16:33 PM] Invalid logging line: <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
[02:16:33 PM] Invalid logging line: <html><head>
[02:16:33 PM] Invalid logging level on line: <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
[02:16:33 PM] Invalid logging line: <title>ERROR: The requested URL could not be retrieved</title>
[02:16:33 PM] Invalid logging line: <style type="text/css"></style>
[02:16:33 PM] Invalid logging line: </head><body>
[02:16:33 PM] Invalid logging line: <div id="titles">
[02:16:33 PM] Invalid logging line: <h1>ERROR</h1>
[02:16:33 PM] Invalid logging line: <h2>The requested URL could not be retrieved</h2>
[02:16:33 PM] Invalid logging line: </div>
[02:16:33 PM] Invalid logging line: <hr>
[02:16:33 PM] Invalid logging line: <div id="content">
[02:16:33 PM] Invalid logging line: <p>The following error was encountered while trying to retrieve the URL: http://hp:7001/soa-infra/deployer</p>
[02:16:33 PM] Invalid logging line: <blockquote id="error">
[02:16:33 PM] Invalid logging line: <p><b>Unable to determine IP address from host name <q>hp</q></b></p>
[02:16:33 PM] Invalid logging line: </blockquote>
[02:16:33 PM] Invalid logging line: <p>The DNS server returned:</p>
[02:16:33 PM] Invalid logging line: <blockquote id="data">
[02:16:33 PM] Invalid logging line: <pre>Name Error: The domain name does not exist.</pre>
[02:16:33 PM] Invalid logging line: </blockquote>
[02:16:33 PM] Invalid logging line: <p>This means that the cache was not able to resolve the hostname presented in the URL. Check if the address is correct.</p>
[02:16:33 PM] Invalid logging level on line: <p>Your cache administrator is [email protected].</p>
[02:16:33 PM] Invalid logging line: <br>
[02:16:33 PM] Invalid logging line: </div>
[02:16:33 PM] Invalid logging line: <hr>
[02:16:33 PM] Invalid logging line: <div id="footer">
[02:16:33 PM] Invalid logging line: <p>Generated Tue, 20 Dec 2011 07:18:27 GMT by proxy.hipt.com.vn (squid/3.1.4)</p>
[02:16:33 PM] Invalid logging line: 
[02:16:33 PM] Invalid logging line: </div>
[02:16:33 PM] Invalid logging line: </body></html>
[02:16:33 PM] Error deploying archive sca_Project1_rev1.0.jar to partition "default" on server AdminServer [http://HP:7001]
[02:16:33 PM] HTTP error code returned [503]
[02:16:33 PM] No error message is returned from the server.
[02:16:33 PM] Error deploying archive sca_Project1_rev1.0.jar to partition "default" on server AdminServer [http://HP:7001]
[02:16:33 PM] #### Deployment incomplete. ####
[02:16:33 PM] Error deploying archive file:/C:/JDeveloper/mywork/TestDeploy/Project1/deploy/sca_Project1_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Thanks a lot!

Hi, thanks for your reply,
I just check but soa-infra is up
Result:
Welcome to the Oracle SOA Platform on WebLogic
SOA Version: v11.1.1.5.0 - 11.1.1.5.0_110418.1550.0174 built on Mon Apr 18 18:05:14 PDT 2011
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 (10.3.5.0)
I've deployed my process in local computer that good! but from remote JDev i've wrong
Help me pls!

Not able to deploy BPM Process

HI,
while deploying the bpm process i am getting the error i.e
[06:41:46 PM] Error deploying archive sca_ArCnWorkflow_rev1.0.jar to partition "default" on server AdminServer [http://ddrvaka:7001]
[06:41:46 PM] HTTP error code returned [500]
[06:41:46 PM] Error message from server:
There was an error deploying the composite on AdminServer: Deployment Failed: Error in getting XML input stream: oramds:/deployed-composites/default/ArCnWorkflow_rev1.0/SCA-INF/classes/META-INF/ATC DEV APPS-jdbc.xml: Illegal character in path at index 84: oramds:/deployed-composites/default/ArCnWorkflow_rev1.0/SCA-INF/classes/META-INF/ATC DEV APPS-jdbc.xml.
[06:41:46 PM] Check server log for more details.
[06:41:46 PM] Error deploying archive sca_ArCnWorkflow_rev1.0.jar to partition "default" on server AdminServer [http://ddrvaka:7001]
[06:41:46 PM] #### Deployment incomplete. ####
[06:41:46 PM] Error deploying archive file:/E:/Ram/6-07-2012/ARCNWorkflow/deploy/sca_ArCnWorkflow_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
if anybody has faced the same issue... please help me on this issue
Thanks in advance,
Ram
Edited by: Kodanda Rami Reddy on Jul 10, 2012 7:16 AM

Hi
1 . What dependency is there is that component any EJB/External Lib/rfc etc...
2. Open the component tree hirerchy and select component (with red indication ) right click and select build/ resolve dependency.
Best Regards
Satish Kumar

Problem integrating BPM Process Spaces with Webcenter Spaces PS5

Good Day!
I have currently installed a fresh build of Webcenter 11.1.1.6 stack in a single domain which contains:
1.)     UCM
2.)     Spaces
3.)     SOA with BPM
After configuring process-portal-install.properties, I have run the ant –f install.xml command which will integrate Process Spaces into Webcenter Spaces.
The problem currently I am facing is that after seeing the process spaces link in Webcenter Spaces, I am also being redirected to internal problem and seeing the logs, I have something like:
[2012-06-11T16:28:43.918-07:00] [WC_Spaces] [ERROR] [] [oracle.webcenter.webcenterapp.internal.view.webapp] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 81caeefafba8cb1a:-15b44550:137ddb9ada0:-8000-000000000000022e,0] [APP: webcenter#11.1.1.4.0] [[
oracle.adf.controller.ControllerException: ADFC-06002: unhandled exception
at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
at oracle.adfinternal.controller.engine.ControlFlowEngine.handleException(ControlFlowEngine.java:640)
at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:235)
at oracle.adfinternal.controller.state.ChildViewPortContextImpl.invokeTaskFlow(ChildViewPortContextImpl.java:104)
at oracle.adfinternal.controller.state.ControllerState.createChildViewPort(ControllerState.java:1387)
at oracle.adfinternal.controller.ControllerContextImpl.createChildViewPort(ControllerContextImpl.java:78)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.createRegionViewPortContext(DCTaskFlowBinding.java:474)
at oracle.adf.controller.internal.binding.DCTaskFlowBinding.getViewPort(DCTaskFlowBinding.java:392)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.doProcessBeginRegion(TaskFlowRegionModel.java:164)
at oracle.adf.controller.internal.binding.TaskFlowRegionModel.processBeginRegion(TaskFlowRegionModel.java:112)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:241)
at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3204)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:115)
at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:359)
Caused by: oracle.adf.controller.ControllerException: ADFC-02001: The ADF Controller cannot find '/WEB-INF/processApplicationsTaskflow.xml'.
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.getMetadataObjects(MdsMetadataResourceProvider.java:473)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.loadUnmutalbeMetadataResources(MdsMetadataResourceProvider.java:372)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.getResources(MdsMetadataResourceProvider.java:183)
at oracle.adf.controller.internal.metadata.MetadataService.getTaskFlowDefinition(MetadataService.java:239)
at oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.findTaskFlowDefinition(TaskFlowCallActivityLogic.java:1072)
at oracle.adfinternal.controller.activity.TaskFlowCallActivityLogic.invokeTaskFlow(TaskFlowCallActivityLogic.java:224)
at oracle.adfinternal.controller.engine.ControlFlowEngine.invokeTaskFlow(ControlFlowEngine.java:217)
... 92 more
Caused by: oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/WEB-INF/processApplicationsTaskflow.xml"
at oracle.mds.core.MetadataObject.getBaseMO(MetadataObject.java:1331)
at oracle.mds.core.MDSSession.getBaseMO(MDSSession.java:3200)
at oracle.mds.core.MDSSession.getMetadataObject(MDSSession.java:1190)
at oracle.mds.core.MOResolver.getMetadataObjects(MOResolver.java:218)
at oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider.getMetadataObjects(MdsMetadataResourceProvider.java:421)
... 98 more
I would like to ask if there is a support link or solution to this problem I am facing such that I may able to see BPM Process Spaces in Webcenter Spaces.

Hi Jeff,
Its looking that BPM was not correctly configured for some reason, exact root cause could not be pinpointed. You can try following two things:-
1. Run the following ant command and restart the Admin and managed servers
ant -f install.xml post-install -DpiArgs -importGSOnly
2. If Oracle BPM and WebCenter have been configured in different domains, configure Trusted Domain Credentials in both the Oracle BPM and WebCenter domains.
http://docs.oracle.com/cd/E23943_01/web.1111/e13707/domain.htm#SECMG404
If issue is still there, you can open the SR with Oracle and also have a look on following bug that is released on 24-May-2012.
Bug 13894890 : [SUP] ERROR NO METADATA FOUND FOR METADATA OBJECT "/WEB-INF/PROCESSAPPLICATIONST
Regards,
Imran

Error after deploying BPM Process due to VC-TaskUI

Hello,
i'm trying to run a successfully deployed BPM Process with one Task created in Visual Composer. The task is consuming a Webservice from the ESWorplace. The task appears in the UWL, when I click it, this error message comes:
(The error only appears when i try to usa a webservice - without anything, just a simple UI, everythin runs well)
The initial exception that caused the request to fail, was:
java.lang.NullPointerException: while trying to invoke the method com.sap.tc.webdynpro.progmodel.api.IWDNode.size() of an object loaded from local variable 'parentNode'
    at com.sap.tc.wd4vc.util.java.XGLNormalizationUtils.resolveDeNormalizedNodeElementAsInput(XGLNormalizationUtils.java:256)
    at com.sap.tc.wd4vc.util.java.XGLNormalizationUtils.copyToNormalizedNodeInternal(XGLNormalizationUtils.java:113)
    at com.sap.tc.wd4vc.util.java.XGLNormalizationUtils.fillNormalizedChildElements(XGLNormalizationUtils.java:160)
    at com.sap.tc.wd4vc.util.java.XGLNormalizationUtils.copyToNormalizedNodeInternal(XGLNormalizationUtils.java:115)
    at com.sap.tc.wd4vc.util.java.XGLNormalizationUtils.copyToNormalizedNode(XGLNormalizationUtils.java:85)
It is a CE7.2 System with NWDS 7.2 SP001.
What is the reason?
Greetings,
Oliver

Problem solved.
In VC - in a datashare - I made an optional Input field of a Webservice (0...n) required (1...1). Apparently there is a bug in the Interface between VC and BPM (Start- and End-Point). Because the "made-required" Context-Node created in VC appear in BPM (in the Inputmapping of the Task) as an infinite-loop of Childnodes. This is the reason for the Error-Message.
Maybe this bug was fixed in newer SP's (I have SP01).
Greetings, Oliver

Separate deployment of UI and BPM process.

Hi All,
We are encountering memory issues while deploying our Fusion web application(11.1.1.5) on server with following config details:-
Weblogic server 10.3 (installable was generic for 64 bit OS),
Windows Server 2003 SP2 with 64 bit support,
RAM is 8 GB.
As a workaround, now we want to deploy UI (ADF) separately from BPM process.
Is it feasible? If yes, then how?
Any help or pointers in this regard would be helpful.
Thanks,
PK
Edited by: user10314058 on Jan 12, 2012 1:33 AM

Hi PK
Yes, and infact the more standard way to deploy any workflow application is in 2 parts. One is the actual workflow sca jar file, that has all the workflow, tasks, bpel stuff etc. And the other is full application itself with all the projects like TaskForms, any other EJB projects, util projects etc EXCEPT the workflow and deploy this as EAR. So from JDeveloper, application level menu, you can create a deployment profile and add all the projects (including taskforms) BUT NOT the workflow project in the assembly section. This is you full EAR. Then for Workflow project, you can always deploy to a JAR file. Take these EAR and JAR and deploy to any soa application server.
NOTE: When you generate JAR for Workflow, make sure NOT to check your TaskForm projects. It will show list of all projects with check boxes, do not check them.
Re: Migrate an jws File
Thanks
Ravi Jegga

How deploy BPM process with ADF form?

Hi everybody,
I'm a newbie on BPM (11g) and ADF. I've created a BPM process and an ADF train into the same project.
I was wonder if I can deploy the ADF stuff and start to test only the train before hook up the ADF form with the UserActivity.
How I can do that? How can deploy it? Better create a jar or ear?
Any suggestions?
Best Regards.
Fairlie

Hi Daniel,
yes I have two separate projects - BPM and ADF - in the same applications.
For now, I'd like to work only on ADF project implementing the front end that I will use in next future into my BPM project.
Every time I click on Run on the main page in ADF project, JDev tries to deploy the entire application.
I need to work only on ADF for now and testing it. The soa server is on remote server.
I've tried to deploy the ADF project on remote server and I get this error:
'Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp
Caused by: java.lang.ClassNotFoundException: oracle.adf.model.servlet.ADFBindingFilter'.
I've checked the oracle.adf.model library class path and It's ok...so I do not understand why I get this error.
What do you think is better to do? Trying to deploy the ADF with war, jar or ear...or...?
Thanks a lot for any suggestions.
Fairlie

Problem with array param when calling a webservice from a BPM Process

Hi. I have a web service and uses an array as parameter.
The array (named "atributos") as part of a business object is defined here:
<xs:schema targetNamespace="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/TrackPCPDOTrans" ...>
<xs:complexType name="TrackPCPDOTransType">
<xs:sequence>
<xs:element name=... />
<xs:element name="atributos" nillable="true" type="ns2:AtributosType" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:element name="TrackPCPDOTrans" type="TrackPCPDOTransType"/>
</xs:schema>
<xs:schema targetNamespace=... >
<xs:complexType name="AtributosType">
<xs:sequence>
<xs:element name="key" nillable="true" type="xs:string"/>
<xs:element name="value" nillable="true" type="xs:string"/>
</xs:sequence>
</xs:complexType>
<xs:element name="Atributos" type="AtributosType"/>
</xs:schema>
In the service task activity, I pass the params to the web service:
"descripcion" --> TrackPCPDOTrans.atributos[1].key
DataObject.descripcion --> TrackPCPDOTrans.atributos[1].value
"estado" --> TrackPCPDOTrans.atributos[2].key
DataObject.estado --> TrackPCPDOTrans.atributos[2].value
"justificacion" --> TrackPCPDOTrans.atributos[3].key
DataObject.justificacion --> TrackPCPDOTrans.atributos[3].value
But when I test the process, an error ocurrs:
<auditQueryPayload auditId="8712004" ciKey="380019">
<dataState>
<dataObject name="FaultMessage" isBusinessIndicator="false">
<value> oracle.bpm.bpmn.engine.model.runtime.microinstructions.TrappableException: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} cause: {faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} parts: {{ summary=<summary>empty expression result. The expression bpmn:getDataInput('trackPCPDOTrans')/ns:atributos[2]/ns1:key is empty. An attempt to read or copy data referenced or computed by the XPath expression either had invalid data, according to the XML schema, or did not contain certain optional data. Ensure that the variable or expression result named in the error message is not empty. Enable XML schema validation of related data elements to ensure the run-time data is valid. </summary>} } </value>
</dataObject>
</dataState>
</auditQueryPayload>
What is wrong?
Thanks for your help.

I did the assignment in XPATH:
oraext:parseXML(concat('<AtributosTracking xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/AtributosTracking">
<arrayAtributosTracking>
<key xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos">','descripcion','</key>
<value xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos">',bpmn:getDataObject('DataObjectDDSAO')/ns:descripcion,'</value>
</arrayAtributosTracking>
<arrayAtributosTracking>
<key xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos">','estado','</key>
<value xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos">',bpmn:getDataObject('DataObjectDDSAO')/ns:estado,'</value>
</arrayAtributosTracking>
</AtributosTracking>'))
AtributosTracking.xsd:
<?xml version="1.0" encoding="UTF-8"?>
<?bpmo version="11.1.1.6.0.15.53" build="15.53" fullName="DataTypes.AtributosTracking" modifiers="268435456"?>
<xs:schema targetNamespace="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/AtributosTracking" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/AtributosTracking" xmlns:ns1="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos" xmlns:bpmo="http://xmlns.oracle.com/bpm/bpmobject/" >
<xs:import namespace="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos" schemaLocation="Atributos.xsd"/>
<xs:complexType name="AtributosTrackingType">
<xs:sequence>
<xs:element name="arrayAtributosTracking" nillable="true" type="ns1:AtributosType" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:element name="AtributosTracking" type="AtributosTrackingType"/>
Atributos.xsd:
<?xml version="1.0" encoding="UTF-8"?>
<?bpmo version="11.1.1.6.0.15.53" build="15.53" fullName="DataTypes.Atributos" modifiers="0"?>
<xs:schema targetNamespace="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="http://xmlns.oracle.com/bpm/bpmobject/DataTypes/Atributos" xmlns:bpmo="http://xmlns.oracle.com/bpm/bpmobject/" >
<xs:complexType name="AtributosType">
<xs:sequence>
<xs:element name="key" nillable="true" type="xs:string"/>
<xs:element name="value" nillable="true" type="xs:string"/>
</xs:sequence>
</xs:complexType>
<xs:element name="Atributos" type="AtributosType"/>
</xs:schema>
But a new error occurrs when I run the BPM process:
<auditQueryPayload auditId="8724004" ciKey="380025">
<dataState>
<dataObject name="FaultMessage" isBusinessIndicator="false">
<value> oracle.bpm.bpmn.engine.model.runtime.microinstructions.TrappableException:
faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
cause: {faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{ summary=<summary>XPath query string returns multiple nodes.
The assign activity part and query bpmn:getDataObject('AtributosTracking')/ns:atributosTracking are returning multiple nodes.
The assign activity part and query named in the error message returned multiple nodes. It should return single node.
According to BPEL4WS specification 1.1 section 14.3, the assign activity part and query named in the error message should
not return multiple nodes. Verify the part and xpath query named in the error message at line number -1 in the BPEL source. </summary>} } </value>
</dataObject>
</dataState>
</auditQueryPayload>
Any idea?
Thanks
Edited by: César on 10/01/2013 11:02 AM

Problem in generating WSDL file for triggering BPM process

Hello Experts,
I have a working BPM process which I want to trigger using a web service. I am referring following blog link to generate New WSDL file and perform further operations:
/people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
However, it everything goes well until I set the type for the "New Element". I want to set type to context of my component controller. So I selected Set type --> Enclosing Project and I seleted Context of my component controller.
Upon saving this, I am getting this error:
"../../rep/ui/com.sap.demo.wd_ui_mna.wd.comp.c_fillmynameage.C_FillMyNameAgeInterface.xsd" is not a path relative to "src/wsdl/NewWSDLFile.wsdl" because it contains too many '../'
I am not sure what is happening here. I have also removed the response element(s) from WSDL source.
What am I missing here?
Thanks in advance,
Ameya

Cross post in EBiz forum -
General EBS Discussion
Regards,
Anuj

Problem start a BPM process, No ADF binding is defined for the service.

Hi,
I am trying to use oracle.soa.management.facade.Service.request method to start a BPM process.
The service works fine while being tested using Enterprise Manager. But while I am trying to invoke the service from a java client, exception occurs.
The Service toString:
Service {
name = TechDocModifyProcess.service
properties = {}
bindings = [Binding {
Name = WSBinding
Type = ws
Mode = entryPoint
Properties = null
WSDL URL = /TechDocModifyProcess.wsdl
WSDL URL = http://eis-bpm-server.eis.smec-cn.com:8001/soa-infra/services/default/TechDocModifyProject!0.2*soa_fee2a899-b630-4c7c-8bbb-c740d37a1b03/TechDocModifyProcess.service?WSDL
Below is the java code I used to call the service.
try {
NormalizedMessage input = new NormalizedMessageImpl();
String uuid = "uuid:" + UUID.randomUUID();
input.addProperty(NormalizedMessage.PROPERTY_CONVERSATION_ID,
uuid);
// payload is the partname of the process operation
input.getPayload().put("creator", "jcooper");
input.getPayload().put("notificationId", 1L);
input.getPayload().put("title", "test");
// process is the operation of the employee service
NormalizedMessage res = null;
try {
svc.post("operation", input);
} catch (Exception e) {
e.printStackTrace();
} catch (ProcessMetadataServiceException e) {
e.printStackTrace();
} catch (Exception e) {
e.printStackTrace();
Below is the exception stack trace:
oracle.fabric.common.FabricInvocationException: java.rmi.RemoteException: EJB Exception: ; nested exception is:
     java.lang.RuntimeException: No ADF binding is defined for the service.!
     at oracle.soa.management.internal.facade.ServiceImpl.post(ServiceImpl.java:178)
     at com.smec.eis.bpm.api.SOASvcProvider.main(SOASvcProvider.java:84)
Caused by: java.rmi.RemoteException: EJB Exception: ; nested exception is:
     java.lang.RuntimeException: No ADF binding is defined for the service.!
     at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
     at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
     at oracle.soa.management.internal.ejb.impl.FacadeFinderBean_4vacyo_FacadeFinderBeanImpl_1035_WLStub.executeServiceMethod(Unknown Source)
     at oracle.soa.management.internal.ejb.EJBLocatorImpl.executeServiceMethod(EJBLocatorImpl.java:837)
     at oracle.soa.management.internal.facade.ServiceImpl.post(ServiceImpl.java:174)
     ... 1 more
Caused by: java.lang.RuntimeException: No ADF binding is defined for the service.!
     at oracle.soa.management.internal.ejb.impl.FacadeFinderBeanImpl.executeServiceMethod(FacadeFinderBeanImpl.java:982)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:94)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.runJaasMode(JpsAbsInterceptor.java:81)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:112)
     at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:105)
     at sun.reflect.GeneratedMethodAccessor2129.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy411.executeServiceMethod(Unknown Source)
     at oracle.soa.management.internal.ejb.impl.FacadeFinderBean_4vacyo_FacadeFinderBeanImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
     at oracle.soa.management.internal.ejb.impl.FacadeFinderBean_4vacyo_FacadeFinderBeanImpl.executeServiceMethod(Unknown Source)
     at oracle.soa.management.internal.ejb.impl.FacadeFinderBean_4vacyo_FacadeFinderBeanImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:668)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

fusion order demo to the rescue ..
specify binding.adf within the <service> in composite.xml and you are good to go ..

BPM Process not able to start from NWA

Hi,
I have downloaded and installed the trial version of NWDS and CE ehp1 server from SDN.
The server is up and running. I am able to create the sample BPM process and build and deploy in the server.
In order to start the process, if i open NWA and check in Configuration Management, the Process and Tasks tab is missing.
I checked in other tabs I could not find this. I reinstalled the server once again, then also same problem.
Please help me to overcome this problem.
Regards,
Krishnaveni.

Hi Krishnaveni
The tab goes missing if your installation fails.
After the installation of server did u get a successfully installed message? I think your installation might have given a small error pop up, still server runs , but the last 2-3 steps in installation goes missing.
Copy all your installation files in to the system in which you are installing and then re install.
Regards
Vidyadhar

BPM Process not able to view in NWA

Hi,
I have downloaded and installed the trial version of NWDS and CE ehp1 server from SDN.
The server is up and running. I am able to create the sample BPM process and build and deploy in the server.
In order to start the process, if i open NWA and check in Configuration Management, the Process and Tasks tab is missing.
I checked in other tabs I could not find this. I reinstalled the server once again, then also same problem.
Please help me to resolve the issue.
Thanks,
Krishnaveni.

Hi Krishnaveni
The tab goes missing if your installation fails.
After the installation of server did u get a successfully installed message? I think your installation might have given a small error pop up, still server runs , but the last 2-3 steps in installation goes missing.
Copy all your installation files in to the system in which you are installing and then re install.
Regards
Vidyadhar

Bpm process deployment problem

Similar Messages

Maybe you are looking for