BPM Process is running forever

I'm using local correlation only and this was working scenario. We had applied patch to PI ( former XI ) last weekend and it messed up. This is a working scenario up until new Patch installed.
Now the Problem is
Mapping ( Transformation step ) is 'in process' forever without completing the process.
This step has technical details such as
Message Text: Execution will continue in background
Exception : 0
Error type: 0
Area: SWF_RUN
Message: 609
Can someone suggest what to do.

check this:
PE outbound error
Workflow (Process Engine) is blocked with Check FM
If I were you I'd kill all work items which belongs to this BPM and I'd reactivate this business process. For me it still looks like problem with cache.
Regards,
Wojciech

Similar Messages

The way to stop process chain running takes forever (without stop)

Someone here used to say in order to stop a process chain running in the middle, we can go to menu: Process Chain -> Remove from Schedule. However we have never made it successful since it runs forever without a stop.
Maybe there is a background process that we can go to kill them immediately that make the whole process chain run really stop?
Thanks

Hi Kevin,
Refer to these posts:
Re: Is there way that we can stop the process chain running in the middle?
Re: How to stop a triggered process chain
How to stop the Job that is running in Background in a process chain
Bye
Dinesh

Stop a running BPM process

Hello everybody,
due to a loop with a never reached end condition we have a process running and sending lots of messages.
How can we stop the process from running?
Thanks Mario

Hi,
take a look at this blog by Michal on how BPM can be stopped.
/people/michal.krawczyk2/blog/2006/06/27/xi-who-said-he-cannot-be-stopped-bpm-jim--sp17
Its from SP17.
Regards,
Bhavesh

BPM Process chain takes long time to process

We have BI7, Netweaver 2004s on Oracle and SUN Solaris
There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. <b>Now the problem is that every alternate day this chain behaves normally and gets completed well before 0830 hrs but every alternate day this chain fails</b> there are almost 40 chains running daily. Some are event triggered (dependent with each other) or some run in parallel. In this, (BPM) process chain, usually there are 5 requests with 3 Delta and 2 full uploads (Master Data). The delta uploads finishes in 30 minutes without any issues with very few record transfers. The first full upload is from 0034 hrs to approximately 0130 hrs and the 2nd upload is from 0130 hrs to 0230 hrs. Now if the 1st upload gets delayed then the people who are initiating these chains, stop the 2nd full upload and continue it after all the process chains are completed. Now this entire BPM process chain sometimes takes 17 -18 hrs to complete!!!!!
No other loads in CRM or BW when these process chains are running
CRM has background jobs to push IDOCS to BW which run every 2 minutes which runs successfully
Yesterday this chain got completed successfully (well within stipulated time) with over 33,00,000 records transferred but sometimes it has failed to transfer even 12,00,000 records!!
Attaching a zip file, please refer the 21 to 26 Analysis screen shot.doc from the zip file
Within the zip file, attaching Normal timings of daily process chains.xls the name explains it.
Also within the zip file refer BPM Infoprovider and data source screen shot.doc please refer this file as the infopackage (page 2) which was used in the process chain is not displayed later on in page number 6 BUT CHAIN GOT SUCESSFULLY COMPLETED
We have analyzed:--
1)     The PSA data for BPM process chain for past few days
2)     The info providers for BPM process chain for past few days
3)     The ODS entries for BPM process chain for past few days
4)     The point of failure of BPM process chain for past few days
5)     The overall performance of all the process chains for past few days
6)     The number of requests in BW for this process chain
7)     The load on CRM system for past few days when this process chain ran on BW system
As per our analysis, there are couple of things which can be fixed in the BW system:--
1)     The partner agreement (transaction WE20) defined for the partner LS/BP3CLNT475 mentions both message types RSSEND and RSINFO: -- collect IDOCs and pack size = 1 Since the pack size = 1 will generate 1 TRFC call per IDOC, it should be changed to 10 so that less number of TRFCs will be generated thus less overhead for the BW server resulting in the increase in performance
2)     In the definition of destination for the concerned RFC in BW (SM59), the Technical Setting tab says the Load balancing option = No. We are planning to make it Yes
But we believe that though these changes will bring some increase in performance, this is not the root cause of the abnormal behavior of this chain as this chain runs successfully on every alternate day with approximately the same amount of load in it.
I was not able to attach the many screen shots or the info which I had gathered during my analysis. Please advice how do I attach these files
Best Regards,

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

Cannot deploy BPM process from JDev into remote weblogic server

Hi all,
I have in a trouble!
I've built a simple BPM process but when i deploy it from JDeveloper to a remote weblogic server it have following error, pls give me solution
[02:16:27 PM] ---- Deployment started. ----
[02:16:27 PM] Target platform is (Weblogic 10.3).
[02:16:27 PM] Running dependency analysis...
[02:16:27 PM] Building...
[02:16:31 PM] Deploying profile...
[02:16:31 PM] Updating revision id for the SOA Project 'Project1.jpr' to '1.0'..
[02:16:31 PM] Wrote Archive Module to C:\JDeveloper\mywork\TestDeploy\Project1\deploy\sca_Project1_rev1.0.jar
[02:16:31 PM] Running dependency analysis...
[02:16:31 PM] Building...
[02:16:33 PM] Deploying 2 profiles...
[02:16:33 PM] Wrote Web Application Module to C:\JDeveloper\mywork\TestDeploy\Project2_UI\deploy\Project2_UI.war
[02:16:33 PM] Wrote Enterprise Application Module to C:\JDeveloper\mywork\TestDeploy\deploy\TestDeploy.ear
[02:16:33 PM] Deploying sca_Project1_rev1.0.jar to partition "default" on server AdminServer [http://HP:7001]
[02:16:33 PM] Processing sar=/C:/JDeveloper/mywork/TestDeploy/Project1/deploy/sca_Project1_rev1.0.jar
[02:16:33 PM] Adding sar file - C:\JDeveloper\mywork\TestDeploy\Project1\deploy\sca_Project1_rev1.0.jar
[02:16:33 PM] Preparing to send HTTP request for deployment
[02:16:33 PM] Creating HTTP connection to host:HP, port:7001
[02:16:33 PM] Sending internal deployment descriptor
[02:16:33 PM] Sending archive - sca_Project1_rev1.0.jar
[02:16:33 PM] Received HTTP response from the server, response code=503
[02:16:33 PM] Invalid logging line: <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
[02:16:33 PM] Invalid logging line: <html><head>
[02:16:33 PM] Invalid logging level on line: <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
[02:16:33 PM] Invalid logging line: <title>ERROR: The requested URL could not be retrieved</title>
[02:16:33 PM] Invalid logging line: <style type="text/css"></style>
[02:16:33 PM] Invalid logging line: </head><body>
[02:16:33 PM] Invalid logging line: <div id="titles">
[02:16:33 PM] Invalid logging line: <h1>ERROR</h1>
[02:16:33 PM] Invalid logging line: <h2>The requested URL could not be retrieved</h2>
[02:16:33 PM] Invalid logging line: </div>
[02:16:33 PM] Invalid logging line: <hr>
[02:16:33 PM] Invalid logging line: <div id="content">
[02:16:33 PM] Invalid logging line: <p>The following error was encountered while trying to retrieve the URL: http://hp:7001/soa-infra/deployer</p>
[02:16:33 PM] Invalid logging line: <blockquote id="error">
[02:16:33 PM] Invalid logging line: <p><b>Unable to determine IP address from host name <q>hp</q></b></p>
[02:16:33 PM] Invalid logging line: </blockquote>
[02:16:33 PM] Invalid logging line: <p>The DNS server returned:</p>
[02:16:33 PM] Invalid logging line: <blockquote id="data">
[02:16:33 PM] Invalid logging line: <pre>Name Error: The domain name does not exist.</pre>
[02:16:33 PM] Invalid logging line: </blockquote>
[02:16:33 PM] Invalid logging line: <p>This means that the cache was not able to resolve the hostname presented in the URL. Check if the address is correct.</p>
[02:16:33 PM] Invalid logging level on line: <p>Your cache administrator is [email protected].</p>
[02:16:33 PM] Invalid logging line: <br>
[02:16:33 PM] Invalid logging line: </div>
[02:16:33 PM] Invalid logging line: <hr>
[02:16:33 PM] Invalid logging line: <div id="footer">
[02:16:33 PM] Invalid logging line: <p>Generated Tue, 20 Dec 2011 07:18:27 GMT by proxy.hipt.com.vn (squid/3.1.4)</p>
[02:16:33 PM] Invalid logging line: 
[02:16:33 PM] Invalid logging line: </div>
[02:16:33 PM] Invalid logging line: </body></html>
[02:16:33 PM] Error deploying archive sca_Project1_rev1.0.jar to partition "default" on server AdminServer [http://HP:7001]
[02:16:33 PM] HTTP error code returned [503]
[02:16:33 PM] No error message is returned from the server.
[02:16:33 PM] Error deploying archive sca_Project1_rev1.0.jar to partition "default" on server AdminServer [http://HP:7001]
[02:16:33 PM] #### Deployment incomplete. ####
[02:16:33 PM] Error deploying archive file:/C:/JDeveloper/mywork/TestDeploy/Project1/deploy/sca_Project1_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Thanks a lot!

Hi, thanks for your reply,
I just check but soa-infra is up
Result:
Welcome to the Oracle SOA Platform on WebLogic
SOA Version: v11.1.1.5.0 - 11.1.1.5.0_110418.1550.0174 built on Mon Apr 18 18:05:14 PDT 2011
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 (10.3.5.0)
I've deployed my process in local computer that good! but from remote JDev i've wrong
Help me pls!

Scheduling a bpm process on particular date

Hi all,
I'm working on SOA suite 11.1.1.5 version.I want to scheduling a bpm process on 7th date of every month.Please give me a suggestion on this.
Thanks!

there are zillion of solutions, my favorite (I like primitive stuff, usually it works under all circumstances) is to use a cron job to run a WGET who triggers a HTTP enabled activator for the process.
Otherwise if you google for soa suite scheduler you will find endless discussions on this topic.... truth is that there is no simple solution AFAIK

Bpm process is not shown on bpm workspace but i see exception on the server

Hi Gurus,
When i try to deploy a simple BPM composite i am getting below exception.
deployment goes fine but when you open BPM workspace to initiate a instance , bpm process is not shown on bpm workspace instead i see below below error can anybody help me on this
===================
ttp://www.omg.org/bpmn20}task>,<{http://www.omg.org/bpmn20}terminateEventDefinition>,<{http://www.omg.org/bpmn20}text>,<{http://www.omg.org/bpmn20}textAnnotation>,<{http://www.omg.org/bpmn20}throwEvent>,<{http://www.omg.org/bpmn20}timerEventDefinition>,<{http://www.omg.org/bpmn20}transaction>,<{http://www.omg.org/bpmn20}userTask>
     at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallingContext.handleEvent(UnmarshallingContext.java:642)
     at com.sun.xml.bind.v2.runtime.unmarshaller.Loader.reportError(Loader.java:254)
     at com.sun.xml.bind.v2.runtime.unmarshaller.Loader.reportError(Loader.java:249)
     at com.sun.xml.bind.v2.runtime.unmarshaller.Loader.reportUnexpectedChildElement(Loader.java:116)
     at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallingContext$DefaultRootLoader.childElement(UnmarshallingContext.java:1049)
     at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallingContext._startElement(UnmarshallingContext.java:478)
     at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallingContext.startElement(UnmarshallingContext.java:459)
     at com.sun.xml.bind.v2.runtime.unmarshaller.SAXConnector.startElement(SAXConnector.java:148)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1329)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:376)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:322)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
     at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:211)
     at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:184)
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:137)
     at javax.xml.bind.helpers.Abstrac
2013-05-19T03:09:26.301-05:00] [soa_server1] [TRACE] [] [] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: e44dcdbf35e56301:-9a14728:13ebbc2239d:-8000-00000000000016a2,0] [SRC_CLASS: oracle.bpel.services.workflow.client.config.ClientConfigurationUtil] [APP: OracleBPMWorkspace] [SRC_METHOD: getClientConfiguration] WorkflowServiceClientContext: Cannot find client configuration file: wf_client_config.xml
[2013-05-19T03:10:40.511-05:00] [soa_server1] [ERROR] [] [oracle.bpm.common] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: e44dcdbf35e56301:-9a14728:13ebbc2239d:-8000-0000000000001815,0] [APP: OracleBPMWorkspace] [[
javax.xml.bind.UnmarshalException
- with linked exception:
[org.xml.sax.SAXParseException: <Line 1, Column 1>: XML-20108: (Fatal Error) Start of root element expected.]
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(AbstractUnmarshallerImpl.java:315)
     at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(UnmarshallerImpl.java:514)
     at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:215)
     at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:184)
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:137)
     at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:184)
     at oracle.bpm.project.io.serializers.model.bpmn.BPMN20Loader.load(BPMN20Loader.java:110)
     at oracle.bpm.project.io.serializers.model.DefaultModelFormat.loadBPMN20CompliantModel(DefaultModelFormat.java:383)
     at oracle.bpm.project.io.serializers.model.DefaultModelFormat.loadInternal(DefaultModelFormat.java:399)
     at oracle.bpm.project.io.serializers.model.DefaultModelFormat.load(DefaultModelFormat.java:62)
     at oracle.bpm.project.io.serializers.model.DefaultModelFormat.parse(DefaultModelFormat.java:182)
     at oracle.bpm.project.io.fs.loader.ProcessesLoader.loadObject(ProcessesLoader.java:89)
     at oracle.bpm.project.io.fs.loader.ProjectModelLoader.loadObject(ProjectModelLoader.java:63)
     at oracle.bpm.project.io.fs.loader.ProjectModelLoader.loadObject(ProjectModelLoader.java:29)
     at oracle.bpm.project.io.fs.FileProjectLoader.createFromXml(FileProjectLoader.java:148)
     at oracle.bpm.project.FuegoProject.createFromXml(FuegoProject.java:901)
     at oracle.bpm.client.internal.processmodel.marshalling.ProcessModelLoader.parse(ProcessModelLoader.java:137)
     at oracle.bpm.client.internal.processmodel.marshalling.ProcessModelLoader.unmarshall(ProcessModelLoader.java:72)
     at oracle.bpm.client.internal.processmodel.ProcessModelServiceRemoteClient.getProcessModel(ProcessModelServiceRemoteClient.java:50)
     at oracle.bpm.papi.ora.mgr.SessionProcessManager.getProcess(SessionProcessManager.java:317)
     at oracle.bpm.papi.ora.mgr.SessionProcessManager.getProcess(SessionProcessManager.java:119)
     at oracle.bpm.papi.ora.mgr.SessionProcessManager.getProcesses(SessionProcessManager.java:142)
     at oracle.bpm.papi.ora.ProcessServiceSessionAdapter.processesGet(ProcessServiceSessionAdapter.java:1359)
     at oracle.bpm.workspace.model.common.PapiBean.getProcesses(PapiBean.java:3099)
     at oracle.bpm.workspace.adf.model.common.BaseViewBean.initProcesses(BaseViewBean.java:600)
     at oracle.bpm.workspace.adf.model.common.BaseViewBean.getAvailableProcesses(BaseViewBean.java:316)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.el.BeanELResolver.getValue(BeanELResolver.java:261)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:173)
     at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:200)
     at com.sun.el.parser.AstValue.getValue(Unknown Source)
     at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
     at org.apache.myfaces.trinidadinternal.taglib.ForEachTag.doStartTag(ForEachTag.java:117)
     at jsp_servlet._jsf._view._search.__search_jsff._jspx___tag12(__search_jsff.java:750)
     at jsp_servlet._jsf._view._search.__search_jsff._jspx___tag11(__search_jsff.java:712)
     at jsp_servlet._jsf._view._search.__search_jsff._jspx___tag10(__search_jsff.java:650)
     at jsp_servlet._jsf._view._search.__search_jsff._jspx___tag3(__search_jsff.java:310)
     at jsp_servlet._jsf._view._search.__search_jsff._jspx___tag2(__search_jsff.java:250)
     at jsp_servlet._jsf._view._search.__search_jsff._jspx___tag0(__search_jsff.java:139)
     at jsp_servlet._jsf._view._search.__search_jsff._jspService(__search_jsff.java:100)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
     at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:442)
     at oracle.adfinternal.view.faces.taglib.region.IncludeTag.doEndTag(IncludeTag.java:232)
     at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag23(__viewpresentationnormal_jsff.java:1194)
     at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag22(__viewpresentationnormal_jsff.java:1131)
     at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag12(__viewpresentationnormal_jsff.java:734)
     at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag5(__viewpresentationnormal_jsff.java:383)
     at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag4(__viewpresentationnormal_jsff.java:326)
     at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag3(__viewpresentationnormal_jsff.java:281)
     at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag2(__viewpresentationnormal_jsff.java:233)
     at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspx___tag0(__viewpresentationnormal_jsff.java:133)
     at jsp_servlet._jsf._view.__viewpresentationnormal_jsff._jspService(__viewpresentationnormal_jsff.java:94)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
     at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:442)
     at oracle.adfinternal.view.faces.taglib.region.IncludeTag.doEndTag(IncludeTag.java:232)
     at jsp_servlet._jsf._view.__viewpresentationfixed_jsff._jspx___tag6(__viewpresentationfixed_jsff.java:407)
     at jsp_servlet._jsf._view.__viewpresentationfixed_jsff._jspx___tag5(__viewpresentationfixed_jsff.java:353)
     at jsp_servlet._jsf._view.__viewpresentationfixed_jsff._jspx___tag2(__viewpresentationfixed_jsff.java:238)
     at jsp_servlet._jsf._view.__viewpresentationfixed_jsff._jspx___tag0(__viewpresentationfixed_jsff.java:133)
     at jsp_servlet._jsf._view.__viewpresentationfixed_jsff._jspService(__viewpresentationfixed_jsff.java:94)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
     at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:442)
     at oracle.adfinternal.view.faces.taglib.region.IncludeTag.doEndTag(IncludeTag.java:232)
     at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag23(__masterdetails_jsff.java:1180)
     at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag22(__masterdetails_jsff.java:1120)
     at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag21(__masterdetails_jsff.java:1072)
     at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag20(__masterdetails_jsff.java:1027)
     at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag19(__masterdetails_jsff.java:982)
     at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag18(__masterdetails_jsff.java:938)
     at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag6(__masterdetails_jsff.java:414)
     at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag5(__masterdetails_jsff.java:367)
     at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag2(__masterdetails_jsff.java:252)
     at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspx___tag0(__masterdetails_jsff.java:139)
     at jsp_servlet._jsf._pagetemplates.__masterdetails_jsff._jspService(__masterdetails_jsff.java:100)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)

The above issue is seen when we don't have proper FP patchset. after applying a patchset all issues sloved

Calling Oracle BPM Process Web Service from Oracle Service Bus

Hi
I am using Oracle Service Bus 10gR3.
I have developed simple BPM process through Oracle BPM studio 10.3.1.0.I then followed steps below
1. Create a Process.
2. Expose the Process as a Web Service.
3. Run the project. This starts the Process Execution Engine.
4. Create an ALSB External Resource of type Management Host.
5. Create a second ALSB External Resource for registration.
6. Register the End Point
Until this point everything is fine. Then I created one project through Oracle Service Bus console. Under that created WSDL, Proxy Service and Business Service Folders. I am using the web service created through BPM studio as teh Business Service in SB . I then created one proxy service to route the request to the Business Service.
Finally when I try to test the Proxy Service by launching test console, I get the
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380001</con:errorCode>
<con:reason>INTERNAL SERVER ERROR</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
I also tried to debug through "Oracle Workshop for WebLogic Version 10.3 " . But I am not getting enough details as to why this is failing.
Please help me . Thanks In advance.
Thanks
Nilay
Edited by: user8950019 on Feb 1, 2010 4:11 AM

Hi,
When im calling wsdl created when BPM exposed as webservice in SOAP-ui, i first hit the startSession
Request is:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:exp="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<soapenv:Header/>
<soapenv:Body>
<exp:startSession>
<password>Employee</password>
<user>Employee</user>
</exp:startSession>
</soapenv:Body>
</soapenv:Envelope>
Response i Get is:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<ns1:startSessionResponse xmlns:ns1="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<return>3782hecq1s85h</return>
</ns1:startSessionResponse>
</soapenv:Body>
</soapenv:Envelope
but when i put this sessionId in main request:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:exp="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<soapenv:Header/>
<soapenv:Body>
<exp:expenseReport>
<sessionId>3782hecq1s85h</sessionId>
<reportArg>

<comments>yes</comments>

<costCenter>jaa</costCenter>

<description>aa</description>

<isApproved>y</isApproved>

<items>

<elements>

<amount>700</amount>

<date>?</date>

<description>?</description>

<receiptChecked>?</receiptChecked>
</elements>
</items>

<reviewedBy>?</reviewedBy>

<submitDate>?</submitDate>

<submittedBy>?</submittedBy>

<total>?</total>
</reportArg>
</exp:expenseReport>
</soapenv:Body>
</soapenv:Envelope>
Response coming is :-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server.userException</faultcode>
<faultstring>fuego.lang.ComponentExecutionException: The method 'expenseReport' from class 'xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl' could not be successfully executed.</faultstring>
<detail>
<ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">fuego.lang.ComponentExecutionException: The method 'expenseReport' from class 'xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl' could not be successfully executed.
     at fuego.lang.Invokeable.invokeImpl(Invokeable.java:244)
     at fuego.lang.Invokeable.invokeDynamic(Invokeable.java:188)
     at fuego.lang.Invokeable.invoke(Invokeable.java:160)
     at fuego.soaptype.SoapListener.invokeDynamic(SoapListener.java:104)
     at fuego.lang.Invokeable.invoke(Invokeable.java:160)
     at fuego.fengine.FEngineWebServiceExecutor$2.execute(FEngineWebServiceExecutor.java:133)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
     at fuego.fengine.FEngineWebServiceExecutor$1.run(FEngineWebServiceExecutor.java:65)
     at fuego.component.Message.process(Message.java:576)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
     at fuego.fengine.FEngineWebServiceExecutor$WebServiceExecutorPrincipal.processBatch(FEngineWebServiceExecutor.java:168)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Caused by: java.lang.RuntimeException: java.lang.NumberFormatException: For input string: "jaa"
     at xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl.expenseReport(ExpenseReportServiceInternalAlbpmListenerImpl.xcdl:36)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.lang.Invokeable.invokeImpl(Invokeable.java:234)
     ... 21 more
Caused by: java.lang.NumberFormatException: For input string: "jaa"
     at java.lang.NumberFormatException.forInputString(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.valueOf(Unknown Source)
     at fuego.util.Conversion.tojava_lang_Integer(Conversion.java:934)
     at fuego.xobject.runtime.ConversionUtilities.fromString(ConversionUtilities.java:56)
     at fuegoblock.xml.XmlElementDeserializer.deserializeElement(XmlElementDeserializer.java:175)
     at fuegoblock.xml.XmlElementDeserializer.deserialize(XmlElementDeserializer.java:81)
     at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:160)
     at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:119)
     at xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl.expenseReport(ExpenseReportServiceInternalAlbpmListenerImpl.xcdl:17)
     ... 28 more</ns1:stackTrace>
<ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">D-113014550</ns2:hostname>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
can anyone explain why this error is coming.?
Edited by: user8937128 on May 19, 2010 6:58 AM

BPM process not responding

Hi
I have created a very simple BPM process in BPM Studio 10Gr3. It is processed as a Web Service and takes in a string and outputs a string (synchronous). The trouble I am having is once it has been deployed onto a clustered environment, I then attempt to call the process from SOAP UI but unfortunatly it just hangs and eventually timesout.
I know the process is running because I can see it in the BPM log viewer and I have outputted additional log messages from the process to the log viewer. However I do not get a response back from the process.
I would appreaciate any help with this.
My setup includes a clustered Weblogic Environment and I have set authentication type to: Username Token Profile.
Thanks
Saheem

Hi Shamila,
To me this looks like a configuration issue. You can trouble shoot it this way
First try to check if the web services is up and running
Second check your configuration, for this, in NWA Manage Processes application get all the 'failed processes'
-check if your in-progress process is listed here-
- if so then open the Error log tab for the process in the details section in Manage Process
- See the logs listed here; generally the last log will tell you if your configuration is correct or not
-if you figure out that the configuration isn't done or is improper then correct the same in provider systems and/or application communication configuration
- then once this is done, re-query the failed process and use the "Recover" option
Regards,
Harsha

BPM Process not getting started

Dear All,
I have created a BPM Process, and have attached a webservice with the start event.After deploying the Process DC I am getting my start webservice in my wsnavigator. When I am executing the start webservice I am getting the following error.
Web service returned error. Fault Code: "(http://schemas.xmlsoap.org/soap/envelope/)Server" Fault String: "Process start has been triggered."
But my process is inprogress but not getting proceeded to the next step , it is stuck in start itself.
how can i make my webservice work?
Regards,
Shamila

Hi Shamila,
To me this looks like a configuration issue. You can trouble shoot it this way
First try to check if the web services is up and running
Second check your configuration, for this, in NWA Manage Processes application get all the 'failed processes'
-check if your in-progress process is listed here-
- if so then open the Error log tab for the process in the details section in Manage Process
- See the logs listed here; generally the last log will tell you if your configuration is correct or not
-if you figure out that the configuration isn't done or is improper then correct the same in provider systems and/or application communication configuration
- then once this is done, re-query the failed process and use the "Recover" option
Regards,
Harsha

BPM Process not able to start from NWA

Hi,
I have downloaded and installed the trial version of NWDS and CE ehp1 server from SDN.
The server is up and running. I am able to create the sample BPM process and build and deploy in the server.
In order to start the process, if i open NWA and check in Configuration Management, the Process and Tasks tab is missing.
I checked in other tabs I could not find this. I reinstalled the server once again, then also same problem.
Please help me to overcome this problem.
Regards,
Krishnaveni.

Hi Krishnaveni
The tab goes missing if your installation fails.
After the installation of server did u get a successfully installed message? I think your installation might have given a small error pop up, still server runs , but the last 2-3 steps in installation goes missing.
Copy all your installation files in to the system in which you are installing and then re install.
Regards
Vidyadhar

BPM Process not able to view in NWA

Hi,
I have downloaded and installed the trial version of NWDS and CE ehp1 server from SDN.
The server is up and running. I am able to create the sample BPM process and build and deploy in the server.
In order to start the process, if i open NWA and check in Configuration Management, the Process and Tasks tab is missing.
I checked in other tabs I could not find this. I reinstalled the server once again, then also same problem.
Please help me to resolve the issue.
Thanks,
Krishnaveni.

Hi Krishnaveni
The tab goes missing if your installation fails.
After the installation of server did u get a successfully installed message? I think your installation might have given a small error pop up, still server runs , but the last 2-3 steps in installation goes missing.
Copy all your installation files in to the system in which you are installing and then re install.
Regards
Vidyadhar

BPM Process Creation: Can't find bundle oracle.bpm.fusion.soa.msg

Hi
I cant create a BPM process in my Jdeveloper .4, .5 or .6. I have updated all them with the BPM extension. While creating a BPM application, the technologies being included in the application, i.e. BPM and SOA are correct. However, on the next page, I can't see any templates. Even if I click finish at that page, only a simple SOA project (not a BPM one, since the BPM Project Navigator tab is absent) gets created with an error log:
SEVERE: Exception while updating observer[1]: oracle.tip.tools.ide.fabric.addin.SCAAddin@b8a11a
java.util.MissingResourceException: Can't find bundle for base name oracle.bpm.fusion.soa.msg.BPMNStringResourceBundle, locale
     at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1427)
     at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1250)
     at java.util.ResourceBundle.getBundle(ResourceBundle.java:952)
     at oracle.javatools.util.BundleLoader.getBundleImpl(BundleLoader.java:130)
     at oracle.javatools.util.BundleLoader.getBundle(BundleLoader.java:167)
     at oracle.javatools.util.BundleLoader.getBundle(BundleLoader.java:152)
     at oracle.tip.tools.ide.fabric.config.SCAConfig.getChildElementValue(SCAConfig.java:580)
     at oracle.tip.tools.ide.fabric.config.SCAConfig.loadComponentType(SCAConfig.java:451)
     at oracle.tip.tools.ide.fabric.config.SCAConfig.loadComponentTypes(SCAConfig.java:395)
     at oracle.tip.tools.ide.fabric.config.SCAConfig.<init>(SCAConfig.java:370)
     at oracle.tip.tools.ide.fabric.config.SCAConfig.getSCAConfig(SCAConfig.java:148)
     at oracle.tip.tools.ide.fabric.config.SCAConfig.getSCAConfig(SCAConfig.java:133)
     at oracle.tip.tools.ide.fabric.addin.ScaProjectNodeListener.<init>(ScaProjectNodeListener.java:71)
     at oracle.tip.tools.ide.fabric.addin.SCAAddin.handleObjectOpenedEvent(SCAAddin.java:462)
     at oracle.tip.tools.ide.fabric.addin.SCAAddin.update(SCAAddin.java:348)
     at oracle.ide.model.IdeSubject.notifyObservers(IdeSubject.java:98)
     at oracle.ide.model.Node.notifyObservers(Node.java:786)
     at oracle.ide.model.UpdateMessage.fireObjectOpened(UpdateMessage.java:673)
     at oracle.ide.model.Node$14$1.run(Node.java:2878)
     at oracle.ide.model.NodeListener.invokeLaterIfNeeded(NodeListener.java:158)
     at oracle.ide.model.Node$14.nodeOpened(Node.java:2869)
     at oracle.ide.model.Node$5.run(Node.java:2531)
     at oracle.ide.model.Node.fireNodeEvent(Node.java:2467)
     at oracle.ide.model.Node.fireNodeOpened(Node.java:2529)
     at oracle.ide.model.Node.open(Node.java:988)
     at oracle.ide.model.Node.open(Node.java:922)
     at oracle.ideri.navigator.DefaultNavigatorWindow.openDataNodes(DefaultNavigatorWindow.java:1237)
     at oracle.ideri.navigator.DefaultNavigatorWindow.restoreExpansionState(DefaultNavigatorWindow.java:1215)
     at oracle.ideri.navigator.DefaultNavigatorWindow.loadLayout(DefaultNavigatorWindow.java:619)
     at oracle.ide.navigator.ProjectNavigatorWindow.loadLayout(ProjectNavigatorWindow.java:391)
     at oracle.ide.docking.DrawerWindow.loadLayout(DrawerWindow.java:640)
     at oracle.ide.navigator.ApplicationNavigatorWindow.loadLayout(ApplicationNavigatorWindow.java:1174)
     at oracle.ideimpl.docking.DockStationImpl.loadViewData(DockStationImpl.java:1353)
     at oracle.ideimpl.docking.TitledPanel.loadClientLayout(TitledPanel.java:1376)
     at oracle.ideimpl.docking.TitledPanel.loadLayout(TitledPanel.java:1714)
     at oracle.ideimpl.docking.TitledPanelXMLDockLayoutPersistence.loadComponent(TitledPanelXMLDockLayoutPersistence.java:29)
     at oracle.ideimpl.controls.dockLayout.DockLayoutInfoLeaf.loadLayout(DockLayoutInfoLeaf.java:123)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:631)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:614)
     at oracle.ideimpl.controls.dockLayout.DockLayout.loadLayout(DockLayout.java:302)
     at oracle.ideimpl.controls.dockLayout.DockLayoutPanel.loadLayout(DockLayoutPanel.java:128)
     at oracle.ideimpl.docking.SidePort.loadLayout(SidePort.java:255)
     at oracle.ideimpl.docking.DockStationImpl.loadValidLayout(DockStationImpl.java:1965)
     at oracle.ideimpl.docking.DockStationImpl.loadExistingPositions(DockStationImpl.java:1654)
     at oracle.ideimpl.docking.DockStationImpl.onStartup(DockStationImpl.java:1629)
     at oracle.ideimpl.docking.DockStationImpl.loadLayout(DockStationImpl.java:1473)
     at oracle.ideimpl.docking.DockStationListener.init(DockStationListener.java:36)
     at oracle.ide.layout.Layouts.activate(Layouts.java:814)
     at oracle.ide.layout.Layouts.activateLayout(Layouts.java:192)
     at oracle.ideimpl.MainWindowImpl$6.runImpl(MainWindowImpl.java:728)
     at oracle.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Would really appreciate some quick help.
Thanks,
Pulkit

Guessing you might hear from Oracle that the URL reference in your thread below is pointed to an the old version and that the classes are no longer supported.
As you know, this is not the case - the URL you have in your thread for the API is the latest for 11.1.1.6. Both classes you mention should be supported (at least according to the Javadoc) and in a recent search I was not able to find them either.
Might be worth a call to Oracle Support to either straighten out the Javadoc or get you a patch.
Dan

Webservice Exceution in BPM Process

Hi,
Do i need to write any code for executing webservice in BPM Process.
The problem is i created process i am able see the work items in the UWL inbox .When the request is submitted it going to Approval inbox ..and once the approval is approved for creation
That should be created in the backend.But that is not happening??what could be the reason??
I am able to see the process in requestor and approval inbox ....all are fine but i could'nt see the output..?
Please can any one help me out??
ONE MORE DOUBT
Whenever I want to create a task iam starting the process so iam able to create one task.. if i want intialize/Create some tasks(100 tasks) what should i do??Do we start the process 100 times..?are anyother procedure?
Regards
Shwetha

Hi Shwetha,
You do not necessarily need to write code in case you rely on existing services. Typically some configuration is missing when the service consumption is not working as expected. Make sure that you did this before.
Could you please check the status of your tasks and processes in the SAP NetWeaver Administrator ("Manage Tasks", "Manage Processes"). The troubleshooting guide (mentioned in the forum description) might help you a little here.
In addition you could check the trace file if some other technical problems occurred.
Regarding your second request:
You do not need to start 100 processes for 100 tasks. That simply depends on your process model. You could prepare something like a loop which creates a task until a certain criteria is reached. But be careful not to run into endless loops here. That might cause massive problems on your system.
Hope that helps,
Martin

How to Stop a BPM Process

Hi,
I have a scenario in which the BPM process went thru an endless loop. There was a logical flaw but the point is that there was no way to kill this process which was running through BPM . We tried RWB, BPM Engine Mointoring but with no success.
In MONI all we see is a clock symbol next to PE icon.
It would be really helpful if someone can tell me how to kill a process running in BPM engine.
Both MONI and RWB tell me the message is Successful therefore cannot be stopped but internally the message is going through BPM workflow and never comes out.
Thanks
Ashish

Hi Ashish,
Logon to the ABAP stack of XI.
Execute the transaction "SWWL" to delete the workflow items.
Regards,
Sridhar

BPM Process is running forever

Similar Messages

Maybe you are looking for