BPM status is "IN Process" even after all the steps in BPM are completed

Hi All,
we have designed a BPM for collection of messages and have a transform step .
In some cases all the steps in BPM get completed but the status of BPM is still in" In Process"  and in SWWL transaction the status is "Started".
Even though the status is started we are able to get the desired output.
Ideally after the steps in BPM get completed the status should be "Completed".
please suggest why we are  getting this status and how can this be resolved.
Thanks and Regards,
Rajesh

hi ,
I am using a fork and loop with a condition to end this loop.the condition gets satsfied.
The messages are coming out of the loop and fork but even then the status is in "InProcess"
thanks,
Rajesh

Similar Messages

  • What problems or issues do i have if even after all the steps i took to fix my problem with the ipod classic and even after i restore it it fails to be recognized by itunes

    even after i restore my ipod it fails to be recognized on my itunes and doenst allow me to format it. been through all the trouble shooting steps and disk mode an still wont work properly plz help someone

    I need my phone not only because it it my alarm clock in the morning, but because i use it excessively at work. PLEASE HELP !

  • My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

    My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

    After pressing restore and after l5 minutes or so It comes up with the error 1611 and I followed all the steps but it still won't work.

  • TS1192 After all the steps I still have a corrupt iphoto 11 Albumdata.xml file. What next?

    I have tried all the steps here, except deleting the com.apple.iApps.plist because I don't have one! I deleted it ages ago trying to do this before and it seems it never created a new one. So, none of this steps work. I want to import my iphoto to Picasa.
    I'm using a Macbook Pro 13 inch, 500 gig HDD 2011 version, with Mountain Lion and the latest iPhoto 11. iPhoto has been acting iffy for ages even after repairing permissions, rebuilding the library and every step I can find. So I want to switch to Picasa. Am I going to have to manually import and sort pics to Picasa?

    Sorry, I read the article on how to fix the problem if other apps cannot see the iPhoto library, because none of the steps there helped me, and it posted my question here.
    My problem is that when I open Picasa and select to import my iphoto library it says that I have a corrupted AlbumData.xml file. It still does this even after all of Apples steps to fix it. I have:
    1. Checked and repaired permissions
    2. Rebuilt my iphoto library
    3. Deleted the com.apple.iApps.plist (but it has not returned)
    4. Made a new AlbumData.xml file
    5. Removed all special characters from album names in iPhoto
    Nothing has worked.
    All iLife applications can see my iphoto library fine. Another application, Lyn, can now see my iphoto library, but Picasa still keeps insisting it is corrupted. I believe it is true because iphoto is incredibly slow, freezes every few seconds and crashes if left open for longer than a few minutes (which is why I am switching to Picasa in the first place). It uses up over 60% of my CPU just to stay open and slows my computer down to a crawl, a sticky, lagging infuriating to use crawl.
    I would prefer to keep using iPhoto as its convenient for my iphone and ipad which I use daily, but its too much to cope with now.

  • Faxes are on status PROCESS even after getting the ouput

    Hi Experts,
    We are facing an issue with faxing.
    Users are getting the fax outputs successfully. However the status of the same in SP01 is still showing the status as " PROCESS".
    Can anyone have an idea why it is not getting updated properly ?
    SAP Release :  40B

    hi ,
    I am using a fork and loop with a condition to end this loop.the condition gets satsfied.
    The messages are coming out of the loop and fork but even then the status is in "InProcess"
    thanks,
    Rajesh

  • Writeback button still grayed out after all the steps I have taken

    Hi experts,
    I have created simple writeback request, and writeback is enabled for one column, and I have placed xlm template under:
    C:\OracleBI\web\msgdb\customMessages\
    and my writeback button still grayed out.
    Below is my xml content:
    <?xml version="1.0" encoding="utf-8"?>
    <WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
    <WebMessageTable lang="en-us" system="WriteBack" table="Messages">
    <WebMessage name="target">
    <XML>
    <writeBack connectionPool="retail sales connection">
    <insert> </insert>
    <update>UPDATE market_share_target SET target_pct=@{c3} WHERE group_cd=@{c0} and region_cd=@{c1} and vehicle_ctr_cd=@{c2}</update>
    </writeBack>
    </XML>
    </WebMessage>
    </WebMessageTable>
    </WebMessageTables>
    Thanks very much

    I added dummy sql in the <insert> section, and restarted services, still the button is greyed out.
    <?xml version="1.0" encoding="utf-8"?>
    <WebMessageTables xmlns:sawm="com.siebel.analytics.web/message/v1">
    <WebMessageTable lang="en-us" system="WriteBack" table="Messages">
    <WebMessage name="target">
    <XML>
    <writeBack connectionPool="retail sales connection">
    <insert>SELECT 1 from market_share_target</insert>
    <update>UPDATE market_share_target SET target_pct=@{c3} WHERE group_cd=@{c0} and region_cd=@{c1} and vehicle_ctr_cd=@{c2}</update>
    </writeBack>
    </XML>
    </WebMessage>
    </WebMessageTable>
    </WebMessageTables>

  • Hi this is aruni chakrabarti, icannot connect wifi to my ipad even after following the steps of the article

    http://

    Hi Aruni,
    If you are having WiFi issues on your iPad, you may find the following article helpful:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Regards,
    - Brenden

  • Profilemanager not opening even after following the steps provided in Firefox website

    I wanted to set profile.
    When trying to open profile-manager using:
    firefox.exe -p
    or
    "\path\to\firefox.exe" -p, firefox browser is opening.
    SO restarted my system and tried again. The problem persists.
    Please help.
    Mine is 64 bit Windows7 OS
    Firefox version 30.0

    The key is to make sure Firefox is completely closed/exited first before trying to start Firefox with the ProfileManager. Otherwise a new window will just open instead.

  • Fields are still in EDIT mode even after Saving the Transaction in UI

    Hello Experts ,
    We are facing one problem in UI .
    We have added the BLOCK " Subject" in Complaint transaction ( BT120H_CPL) .
    We are able to fill the data in the fields for subject block like " Code, Code Gruppe etc, but even after saving the transaction these fields are in Edit mode .
    Can anyone give some pointers/solution to this ?
    Regards
    VB

    Hello,
    if the fields are in Edit mode or closed is controlled by the attribute VIEW_GROUP_CONTEXT of the controller class (*IMPL).
    There are also methods to change this VIEW_GROUP_CONTEXT depending on the requirement like "DISABLE_VIEW_GROUP_CONTEXT".
    But as i understood you correctly you do not have a own developed view but a SAP standard view. In this case i would create a OSS-Message for the issue.
    But feel free to do some debugging on this VIEW_GROUP_CONTEXT.
    Best regards
    Manfred

  • My first generation iPad no longer recognized in iTunes, neither via usb nor wi-fi. Did all the steps  recommended in Apple iPad support. Now what?

    My first generation iPad is no longer recognized in iTunes. It just doesn't show up neither via USB nor via wi-fi.
    I've checked the usb connection and cable and its OK.
    I checked that iTunes is up to date on my Mac.
    I reinstalled iTunes on my Mac. 
    I restarted my Mac,
    I've restarted my iPad.
    The iPad has IOS 4.3.1 (8G4) installed. And without the iPad being recognized in iTunes  I can not update the IOS nor apps, nor remove unneeded photos. The iPad is completely filled up, no memory left to allow even updates via cellular or via wi-fi.
    Trying to gain access to update the IOS and to update APPS and to remove the pics I already have backed up and do not need on this iPad locally.
    PS: I even tried to connect the iPad to a different Mac and it was not seen in that iTunes either.
    So, what can I do now?
    Any suggestions besides using it as a paper weight?
    Thanks

    Hello there, Blueye3355.
    The following iPad Troubleshooting Assistant has some good steps to run through, to make sure you've covered all your bases:
    Apple - Support - iPad - iTunes Assistant
    http://www.apple.com/support/ipad/assistant/itunes/
    If following all the steps listed there are additional options on the last step you might want to try or review the "if the issue persists" steps mentioned in the second part of:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • HT201412 even after all night of charging my ipod touch is running out of battery whithin 5 minutes of it being on, why is this?

    even after all night of charging my ipod touch is running out of battery whithin 5 minutes of it being on, why is this?

    Try the following to rule out a software problem.:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still that short of life ake an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I updated my ipad from IOS 5 to IOS 8. All games and apps that I downloaded was deleted. What can I do to return them back, even after downloading one of the games He deleded all the steps I went through and I need to start all over  again

    I updated my ipad 2from IOS 5 to IOS 8. All games and apps that I downloaded was deleted. What can I do to return them back, even after downloading one of the games He deleded all the steps I went through and I need to start all over  again

    iCloud: Restore or set up your iOS device from iCloud
    Or from iTunes  http://www.iphonefaq.org/archives/971992

  • Execution does not end even after all records updated..

    Hi,
    I have plsql code like :
    declare
    begin
    for x in ( select .......) loop -- about 4000 times
    for y in ( select ............) loop -- about 50 times
    end loop;
    -- some code goes here to manipulate clob data
    -- like creating free temp clobs - use - then free them
    -- Update statement that update some table using clob values.
    insert into tablex values(sysdate);
    commit;
    end loop;
    end;
    Here I can monitor from other window howmany records are inserted into tablex and howmany updated in update statement by...
    select count(1) from tablex;
    After 50 mins i can see that all records are updated but...
    plsql code does not end its execution it continues even after all records are updated..untill i have to kill the session or let be run for long time.. :(
    I can not understand why this it is not ending execution..
    What could be the problem ...

    Hi,
    Here it is.....
    declare
    v_text_data TableA.text_data%type;
    v_clob clob;
    type dummyclob_t is table of clob index by binary_integer;
    dummyclob dummyclob_t;
    v_str varchar2(255) := 'ddfsajfdkeiueimnrmrrttrtr;trtkltwjkltjiu4i5u43iou43i5u4io54urnmlqwmreqwnrewmnrewmreqwnm,rewqnrewqrewqljlkj';
    begin
    select data bulk collect into dummyclob from sfdl_clob; -- five rows containing clob data upto 1MB
    for x in (select object_id
    from TableA
    where object_type = 'STDTEXT' ) loop
    dbms_lob.createtemporary(v_text_data,TRUE);
    for y in (select '<IMG "MFI_7579(@CONTROL=' || ref_id || ',REF_ID=' || ref_id || ').@UDV">' temp_data
    from TableB
    where object_id = x.object_id) loop
    v_text_data := v_text_data ||
    case
    when trunc(dbms_random.value(0,7)) = 0
    then chr(10)
    else v_str
    end ||
    y.temp_data;
    end loop;
    select text_data into v_clob from TableA where object_id = x.object_id for update;
    if v_text_data is not null then
    dbms_lob.append(v_clob,v_text_data);
    end if;
    dbms_lob.append(v_clob,dummyclob(trunc(dbms_random.value(1, 6))));
    dbms_lob.freetemporary(v_text_data);
    insert into xyz values (sysdate);
    commit;
    end loop;
    end;
    Thanks for your time..:)
    Rushang.

  • I updated my Iphone4 and had the m.calendar app with all of my daily temperatures saved, since the update after even after synching the iphone to itunes I have lost months of tracking I am devastated!! can anyone help get it back

    I updated my Iphone4 and had the m.calendar app with all of my daily temperatures saved, since the update after even after synching the iphone to itunes I have lost months of tracking I am devastated!! can anyone help get it back

    I don't understand this answer. What do you mean " your contacts should be in whatever program/service you have selected to sync."? The address book is created on the phone not in Itunes or any other program/service. When Itunes says backing up phone I have to assume it backs up everything on the phone. Most of what's on my phone does not come out of itunes. I download apps directly on the phone. When the software updates it does not bring those apps back. I have to go into the appstore and install them all over again. Itunes music library syncs with whatever is on the device your linked up to BUT the phone book just dissappears after you update the phone. There is no way to save it anywhere else.

  • My Macbook Mavericks pro does connect well to a data projector, even after following the process recommended, what is the optimum display settings? Has anybody else had this problem, I'm close to going back to PC's

    My Macbook pro Mavericks does not connect well to a data project even after following the recommended process, Has anybody else struck this problem, what is the optimum display setting? Im close to going back to PCs

    You said " digital AV Adapter and thunderbolt". Do you mean Thunderbolt/min displayport to HDMI adapter?
    It appears you are using the free version of the Display Menu app.
    What does the Apple Display properties show? System Preferences>Displays>Display show?
    Look at the projector/go to the manufacturer's support site and find the native resolution of the projector.
    Googling for Sori data projector id not produce any hits

Maybe you are looking for