BPM with WebAS

Hi,
I am very new to XI and BPM and desparately need help. The scenario is as follows. The legacy system is writing to a DataQ, the DataQ is read by a WebAS method which returns an array of strings which contains the data I need to process.
Because the WebAS server cannot poll the Q , I have created a proxy that calls XI with the Q name and login details. I have created the required MM and Interfaces and the scenario to date is as follows.
BPM:
Start
Receive step Asynchronous (Interface ReadAllRecFromDQStrArray Outbound Async created container ReadAllRecFromDQStrArray type AI ReadAllRecFromDQStrArray_AI)
Send step Synchronous (Interface ReadAllRecFromDQStrArray_sync Inbound Sync Using AI ReadAllRecFromDQStrArray_sync_AI created container ReadAllRecFromDQStrArray_sync_AI type AI ReadAllRecFromDQStrArray_Response_AI)
Send Asynchronous.
My problem is this, I am trying to get a multiline container for the array string that is returned from the WebAS method that reads the Q. But I get an error when I try and activate the Interface mapping. How do I transform the array returned from the WebAS method into a multiline container so I can further process it in a loop?
Thanks,
Massimo

Hi Massimo,
Please post your question in the Exchange Infrastructure forum for such specific question: Process Integration (PI) & SOA Middleware
This is a discussion forum is for ISVs and partners building XI Adapters and XI Content and certifying these as NW-XI-AF, or NW-XI-CNT.
Regards,
John Ta

Similar Messages

BPM work spaces integration with Web-Center work spaces

Hi ,
I have a requirement of Integrating BPM work space with WEB-CENTER SPACES.
Can any one suggest me how to integrate....?
Thanks & Regards
PRAMILA PADAM

Ok, Figured out the issue,
Values in the OAF_AXF_CMD_PARAMS table was not matching with the actual attributes on the OAF pages. The four values
Entity Name, Primary Key, View Object and Attributes are to be entered for each page where we are intending to have the MA button.
Thanks,
Rajiv.

Accesing to the BPM Composer Web Page - Error : CurrencyKey not preserved

Hi there,
I've recently installed the Soa Suite 11.1.1.4, and when i logged in th BPM Composer and I try to use any option of the web page, i can see in the log the next error :
]] Root cause of ServletException.
java.lang.AssertionError: CurrencyKey not preserved
at org.apache.myfaces.trinidad.component.UIXCollection.encodeEnd(UIXCollection.java:531)
With this error i can't navigate inside the BPM Composer Web page, any idea about this problem?
Regards

The solution to this issue, is adding in the CMDLINE of the Register Service the next value -da:org.apache.myfaces.trinidad.component.UIXCollection, with this option we disable the assertion of java, after that i can work with the BPM Composer Web Application

Integrate a BPM with a Webservice of SAP XI.

Hi experts,
We want to integrate a BPM with a Websevice published in SAP XI.
The BPM sends messages synchronous (abstract interface) to a Business Service that receives a message synchronous (inbound interface).
For the integration of these services is necessary to set up a Receiver Agreement with a Communication Channel of type SOAP Receiver.
My questions are:
Why should the communication takes place between SAP XI I have to set up a channel SOAP?
Is there any way to send messages from a BPM to a service SAP XI (Webservice / Interface) in an efficient manner?
Thanks,
Jose.

To deploy the wsdl file in XI,
You can connect to XI server by using the End Point URL as
The SOAP Sender uses the XI Server URL as below
http://<server>:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<service>:<channel>
Service & channel indicates the Sender SOAP adapter in XI to be used..and will direct to integration server.
Refer
call Webservice with XI SOAP Adapter
How To Set Up a Web-Service-Related Scenario with SAP XI
https://websmp207.sap-ag.de/~form/sapnet?SHORTKEY=01100035870000582377&
Invoke Webservices using SAPXI
SOAP Sender Steps
SOAP Sender Steps
Edited by: parvathy sriraman on Sep 19, 2008 9:42 AM

How to integrate BPM with Composite application created in Developer Studio

Hi,
I want to know what purpose can BPM fulfill in creating a composite application.
I want to execute various business processes like sales order creation etc. through CE. So should I use BPM components and avoid writing my own code logic and creating my own business objects in Developer studio?
Also how can I use BPM components in Developer Studio to achieve this?
Shall I create the Guided procedure model and UI in my composite application and then use BPM for business objects and the integration?
Plz give me a detail.
thanks
Roshan

Hi Roshan,
you can use BPM or Guided Procedures to implement the business logic of your process.
BPM combines very nice with WebDynpro. There are some guidelines available at SCN here:
[BPM and Web Dynpro for Java Integration u2013 Guidelines|http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/b06c49b2-ac63-2c10-3d8d-d17b817ba4ca&overridelayout=true]

No result while creating a service consumer with Web Service Wizzard

Hi,
I've tried to create a service consumer with Web Service Wizzard in SE80 by using URL/HTTP Destination but nothing happens. After the popup with logondata for the WSDL I get the CRM start screen and nothing has been created in the given package.
technical details:
I use a CRM 5.0 system with SP15 (SAPKB70015).
I created the provider service at a 7.10 system with SP5 (SAPKB71005) via SPROXY, SOAMANAGER and WSPUBLISH and get the WSDL-URL from Service Registry.
The Service Registry of the 7.10 system serves as central Service Registry.
Has anybody an idea ?
Christoph

Guy,
Thanks for your reply.
This problem has been solved. Since I haven't turned on everything that to use transaction SOAMANAGER needs. After complete the switch-on works, the problem never happens again.
Thanks again.

Is there a way to have the iPad 2 "read" text from iBooks as with web sites or pages?

is there a way to have the iPad 2 "read" text from iBooks as with web sites or pages? A different App perhaps?

Isn't that you asking how to get it (undefined) back?
If you never had Pages '09, you can buy it from Amazon very cheaply:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=432&sid=f68e84cd2ec6 123bd2ed93806c7e7fb6&mforum=iworktipsntrick
Peter

How can I create a query with web service data control?

I need to create a query with web service data control, in WSDL, it's query operation, there is a parameter message with the possible query criteria and a return message contains the results. I googled, but cannot find anything on the query with web service. I cannot find a "Named Criteria" in web service data control like normal data control. In Shay's blog, I saw the topics on update with web service data control. How can I create a query with web service data control? Thanks.

Hi,
This might help
*054. Search form using ADF WS Data Control and Complex input types*
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html

Problem in submit button on adobe form integrated with web dynpro

Hello,
I'm facing prob in triggering web dynpro event onSubmit for Interactive form.
I've created a submit button from web dynpro activex pallete on adobe form (integrated with web dynpro) to send the form as email.
Then in the web dynpro view where this form is embedded i have created an action against onSubmit event and called a method within this.
However, on clicking Submit button this event is not getting triggered.
Please let me know what is lacking in this process?
Thanks.

Hi,
I am also facing the same problem. i have developed a simple scenario under which user have to input his/her details and on submit button it will be updated to database.
I have tried the above solution but after adopting this solution all the editable fields become non-editable.
so the above solution is not working for me could you help me out.
I think ... try this....
When you create the Adobe Form from WebDynpro, you need to follow one step in SFP Transaction or inSE80 transaction. Open the Adobe Form in any one the transaction and now in SAP menu bar "Utilities" in that you will find the "INSERT THE WEBDYNPRO SCRIPT" just click on that one. Then you will see a new Script Object is being created with the name "ContainerFoundation_JS" under the "Variables" in the Heirarchy of the Object Pallete of the Adobe Form.
This step is mandatory to use the SUBMIT Button of the "WebDynpro Native", to trigger the OnSubmit event of the WebDynpro.
Thanks
Edited by: shailendra2sap on Mar 6, 2009 12:24 PM

VPN remote site tunnel-all with web and email filtering at core

I'm helping a client setup a 'tunnel-all' VPN from remotes to the core. That's not difficult - there's enough commentary in the community and I can set it up in the lab. The rub comes with the location of the web filter box in particular - it's currently in-line with the inside interface of the ASA.
What does the topology for a typical tunnel-all VPN with web filtering at the core look like? Can't put my hands on any quickly.
We only have one ISP conn at this time. I have a layer-3 switch at the core too.
Thx

Hi,
Thats a good question.
I haven't thought about this part of VPN filtering much as I've usually had to open only a few ports. But if you really need to open all traffic from local to remote, you will also be doing the same for the other direction in the same ACL ACE rule.
The only thing I can come up with right now is to stop using VPN Filter list and change the "sysopt" setting so that ASA wont let VPN traffic past the outside interface without checing the outside interface ACL
The Configuration command (8.2) is the following:
sysopt connection permit-vpn
For traffic that enters the adaptive security appliance through a VPN tunnel and is then decrypted, use the sysopt connection permit-vpn command in global configuration mode to allow the traffic to bypass interface access lists. Group policy and per-user authorization access lists still apply to the traffic. To disable this feature, use the no form of this command. sysopt connection permit-vpn no sysopt connection permit-vpn
Though if you change this setting, you will have to take this into account with every VPN Client or L2L VPN you have configured so far.
After this you can create rules on your outside interface access-list to limit remote user access to your local network. From local to remote networks you can use the access-lists assigned to each interface in question.
Hope this helps
- Jouni

Error in BPM with multimapping.

Hi,
I've got next error in a transfromation step of bpm with multimapping :
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping http://www.miquello.com/C3900 IM_I3934_REPLICA_BBY , Software Component Version 931D4B005DF711DFC0CACC330A640786</Trace>
<Trace level="1" type="T">Mapping Step 1 , Type JAVA , Program com/sap/xi/tf/_MM_I3934_REPLICA_BBY_</Trace>
<Trace level="3" type="T">MTOM Attachments Are Written to the Payload</Trace>
<Trace level="3" type="T">Mapping has exactly one source message</Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty</Trace>
<Trace level="3" type="T">Executing multi-mapping</Trace>
<Trace level="1" type="T">while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'guid' Thrown: java.lang.NullPointerException: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'guid' at com.sap.guid.GUID.parseHexGUID(GUID.java:1046) at com.sap.guid.GUIDGenerator.parseHexGUID(GUIDGenerator.java:111) at com.sap.aii.utilxi.misc.api.GUIDFactory.parseHexGUID(GUIDFactory.java:127) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createInputParameter(ParametrizationMap.java:140) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createElement(ParametrizationMap.java:112) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createParametrizations(ParametrizationMap.java:57) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.<init>(ParametrizationMap.java:37) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.newInstance(ParametrizationMap.java:65) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:111) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:72) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at sun.reflect.GeneratedMethodAccessor804.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1098.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:183) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:267) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:280)</Trace>
</MappingTrace>
However i've tested with same input message in Operation Mapping ESR, without any error.
What could be the cause?
Thanks, in advance.
Carme.

Hi,
Are you using parameterized mapping or RFC lookup in your mapping???? If yes, please make sure that you are passing the parameter in the interface determination instead of null value.
Also verify whether your cache is updated with the latest GUID of your mapping program or not.
Regards,
Priyanka.

Error while deploying when working with web service

Hi friends,
I am working with web service. When i try to run the build.xml, I'm receiving an error as follows:
*[javac] D:\MyWorkspace\MyProjectWeb\Javasource\aaa\bbb\ccc\ws\endpoint\ListenerServiceEndpoint.java:27: package org.springframework.ws.server.endpoint does not exist
[javac] import org.springframework.ws.server.endpoint.AbstractDomPayloadEndpoint;
[javac] ^ *
Could anyone please help me in getting this solved??
Thanks in Advance,
Robis

Pretty self-explanatory - the Spring framework jars are missing from the classpath used in compilation.
If you don't have them, get them from www.springframework.org.

Problem with web.show_document with Jinitiator and Firefox

Not sure Firefox 2.0 is officially certified with Forms 9.0.4.1 and Jinitiatorbut regardless we have some users who want to use this combination. Everything seems to work fine except for the calls to web.show_document which opens a new browser window and displays some html etc.
The problem is that even though the client Forms JVM is Jinitiator (1.3.1.18 or .21) when the call to web.show_document occurs somehow the Sun Java Plugin starts and having the two JVM's at once causes a fatal crash in Firefox. Can anyone suggest a way to preven the second JVM from opening?
When the user uses the Sun Plug as the client Forms JVM there is no problem as the second JVM does not open. Unfortunately some users insist on Jinitiator with Firefox hence the problem. -quinn

James,
This whole applet embedded in a browser model for webforms is driving us batty at times. The list of problems includes:
1) Users are constantly tempted by browser controls and accidentally do all sorts of things to get them in trouble. This has included but not limited to using the navigation arrows, jumping off to read their email in the same window as the form and returning to a dead forms session, minimizing, resizing, blurring off to another window and then returning back by clicking on the title bar of the browser and wondering why the form doesn't tab etc.
Sure hobbling the browser by opening with limited functionality is a possibility but not a complete solution.
2) New versions of browsers seem to break something. Both IE 7 and Firefox 2 have their own problems with web.show_document, especially file associations such as CSV and DBF and trying to open things in Excel in IE7.Firefox seems to have less problems for some yet some some oddities like the one that started this thread (and 2.0 opening new windows in tabs by default instead of windows).
3) JVM jigsaw puzzle. Is it Jinit or Sun, which versions? Which combinations of browser version and JVM works.
4) General fragility of the whole architecture. Running a client JVM in a web browser on top of a PC Operating system connectiong to a forms server over a network embedded in a Java Container server on a full blown web server running on a unix operating system is pushing the bubble. Throw in the mix that any of these components can be combined in numerous ways makes one wonder how it works as well as it does.
Still users randomly getting dropped connections to forms server (network gltches?). General sluggishness (poorly written forms?). Periods of users with unduplicatable errors primarily network related it would appear.
General feel that it is not rock solid stable. Perusing metalink documents on performance and tuning gives too much and too general info to troubleshoot so just shrug shoulders and say 'network problem'.
What's the solution? Java webstart would seem to help at least with the browser realted issues but is that supported and documented how to use yet. Also we'd lose web_show_document which is critical (could it be replaced by webutil calls to open browser?).
-quinn

Search Help on Adobe Interactive Form with Web Dynpro ABAP

Hi All,
I have created Adobe Interactive Form with ZCI type and XML based interface type using Webdynpro ABAP.
I placed a text field USER_NAME on the form ( data element is linked to search help USER_COMP ).
Added Native WD UI element 'Value Help' to form to search for users and changed script
*var fieldName = "INSERT_NAME_HERE*"; to var fieldName = "USER_NAME";
The problem is that when I click on the value help button, nothing happens.
Is any more additional steps required ?
Thanks
Karu

Hello
Check this
F4 Value Help on Adobe Interactive Form with Web Dynpro ABAP
Thanks
Anirudh

Form calling Report with web.show_document caught by SSO

A 10g form button calls a 10g report via web.show_document.
In the dev environment it works, but in the full app server SSO is enabled and stops & prompts for a login/password.
I'm trying to include the SSOCONN parameter in the URL. I've tried the db userid & the sso userid without success.
Any help is much appreciated.

How are you calling the report with Web.Show_Document (what's the URL you're passing)? The application I'm working on uses SSO and I call Reports from Forms and don't have this issue. You should just have to pass the return value of RUN_REPORT_OBJECT() in the URL along with the server name - at least that is how we do it. For example (bare in mind this is an abbreviated example):
DECLARE
 v_rep_rtn VARCHAR2(4000);
 v_repsvrname VARCHAR2 (100); /* This is a CONSTANT and used here as an example */
 v_paramlist paramlist;
BEGIN
 v_rep_rtn := Run_Report_Object(v_report, v_paramlist);
 Web.Show_Document('/reports/rwservlet/getjobid'||substr(v_rep_rtn,Instr (v_rep_rtn, '_', -1) + 1)||
 '?server=' || v_repsvrname);
 v_report := Find_Report_Object('REP1');
 Set_Report_Object_Property(v_report, report_execution_mode, batch);
 Set_Report_Object_Property(v_report, report_comm_mode, synchronous);
 Set_Report_Object_Property(v_report, report_destype, CACHE);
 Set_Report_Object_Property(v_report, report_desformat, 'pdf');
 Set_Report_Object_Property(v_report, report_server, v_repsvrname);
 v_rep_rtn := Run_Report_Object(v_report, v_paramlist);
 rep_status := Report_Object_Status(v_rep_rtn);
 WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED') LOOP
 rep_status := Report_Object_Status(v_rep_rtn);
 END LOOP;
 IF rep_status <> 'FINISHED' THEN
 msg_box('Error when running report. Status = '||rep_status);
 else
 Web.Show_Document('/reports/rwservlet/getjobid'||substr(v_rep_rtn,Instr (v_rep_rtn, '_', -1) + 1)||
 '?server=' || v_repsvrname); -- || '&authid=orcladmin/admin999');
 END IF;
END;Hope this helps.
Craig...
-- If my response or the response of another is helpful or answers your question please mark the response accordingly. Thanks!

BPM with WebAS

Similar Messages

Maybe you are looking for