BPM10g and nillable fields in WSDL

We have several web service wsdls that contain fields that are defined as nillable=true and minoccurs=0. The problem that we're seeing in BPM10g (10.3.2) is that when we set values on the introspected classes in BPM Studio, if we do not set values for the nillable fields, the generated web services calls contains those fields with nil=true. What we would like to happen is for those fields to not be sent at all if we don't set values on them.
Does anyone know of any setting that we can use to prevent BPM 10g from sending fields that we don't set, even if the field is marked as nillable=true in the wsdl?

fixed.

Similar Messages

  • DSO - What key fields and data fields in dso

    Hi experts,
    I need to create a dso in between the cube and 2 data sources(2lis_11_vaitm, 2lis_12_vcscl) to stage the data. My question is: what key fields and data fields to choose for the dso? is there a standard dso to copy? please explain in detail the model to set up, whether to connect both the ds's to dso and then to cube or one ds to dso and the other to the cube. more details will help.

    Check this for standard DSO:
    http://help.sap.com/saphelp_nw04/helpdata/en/43/fcdc387f34384f94c3227baf3837a8/content.htm
    Thanks...
    Shambhu

  • Infoset Join condition on Key feilds and data fields

    Hi Guys,
    I have a requirement to biuld the Info set with join conditon on two DSO's  the info objects which i am using in the JOin condition are defined as data fieds in one DSO and defined as key fields in another DSO, is it possible to define join condition on key fields and data fields.
    The two info objects are                
                           0AC_DOC_NO
                           0ITEM_NUM
    These two info objects are defined as  data fields in DSO :   0LIV_DS1   Invocie verificaion
                                                            key fields in DSO:    0FIAP_0o3 FI AP Line Item
    Please suggest me is it possible to define join the condtion on the data fields and key feilds.
    Thanks
    Best regards
    SG

    Hi
    yes you can create join, you will get any issue in reporting level.
    example: Say i want to create Info Set on 0MATERIAL and Sales DSO.
    In 0MATERIAL Info Object it is key filed, but in my DSO 0MATERIAL is data field.Still we can create
    Creation of join is dependent on fields common in your source objects.
    check out the below document
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7?QuickLink=index&overridelayout=true
    Regards,
    Venkatesh
    Edited by: Venkateswarlu Nandimandalam on Sep 27, 2011 2:26 AM

  • Key fields and data fields in a DSO  ??

    i have a question regarding key fields and data fields in a Standard DSO...
    i am using 2 datasources to build a open sales report 2LIS_11_VASTH  and  2LIS_11_VASTI   i am pulling in data from these 2 data sources to a DSO and i am wondering what infoobjects should be in the key fields and data fields .....does this reflect back to table VBUK and VBUP tables and does the key field in the DSO have to be the key fields in VBUK and VBUP tables  ????  or what really should be included as key fields and data fields   ????  
    please help....

    If you look at the various SD tables, VBELN and POSNR are commonly used as the document number and document line item.
    For VBAP and VBUP, it's referring to the Sales Order Line Item with the columns VBELN and POSNR as the key for both tables. However, if you look at the LIPS table, which is the Delivery Line Item table, it too has VBELN and POSNR as the key. Likewise, the VTTP table, which is the Shipment Line Item table, also has VBELN and POSNR as the key.
    While using RSOSFIELDMAP as a map is a fairly good "rule of thumb", it still needs to be used with a level of skepticism.

  • Prerequsites for deciding Key fields and data fields

    Hi
    I would like to know the criteria to decide upon KEY fields and Data fields for an infoprovider.

    Hi,
    What is a Key field in a Database and How should I choose one?
    Keys are crucial to a table structure for many reasons, some of which are identified below:
    They ensure that each record in a table is precisely identified.
    They help establish and enforce various types of integrity.
    They serve to establish table relationships.
    Datafields may be Charecteristics and it may be keyfigures
    Regards,
    Marasa.

  • Key Fields and Data Fields in ODS

    Hi Guru's ,
    Can u Explain what are Key Field's and Data Field's in ODS,and How they work.
    Thanx in Advance.

    Hi Pradeep,
    An ODS’ key fields forms a unique combination of chars according to which data in the ODS will be summed up. Data fields are additional fields, chars or key figures.
    For example, you have the following key fields:
    Doc No, Doc line item (item no in the doc) and you load the following data:
    Doc# Item# Amount CALDAY
    1234  1        100       26.09.2005
    1234  1        150       27.09.2005
    1234   2        300      27.09.2005
    1235   1        400      27.09.2005
    The first two rows with the same key fields (1234-1) will be aggregated and into ODS will go amount of 250.
    What I said is true if for Amount key figure the ‘Add’ option is set.
    But if you set an ‘Overwrite’ option, then the second record will overwrite the first one and only amount of 150 will go to ODS!
    But if CALDAY is also a key field, then into ODS will go all records without any aggregation, because key fields combination is different for all records.
    So, ODS’ key fields choice and KFs settings are very important for data aggregation in the ODS.
    Best regards,
    Eugene

  • Data fields and key fields

    Hi,
    Data fields and key fields are same as Characteristcs and key figures? Or they are diffrerent?
    Thanks,
    Radha

    HI
    Key Fields =  Acts as Primary Key for The ODS like Primary of Tables in R3.
    Data fields =  Apart from Key fields We consider rest as data fields.
    Ususally we use Characteristic info Objects and Dates in Key Fields and Key figures in Data fields.
    It's decisive factor for overwriting property of ODS or DOS.
    Hope this helps.
    Regards,
    Rangzz
    Edited by: Ranganath Kodiugane on Feb 7, 2009 12:14 PM

  • Chart report Condition fields and Data fields

    Hi all,
    i have tried chart report by adding two condion fields and one data field, the report is more meaning full in this scenario. the first condition field is taken as x-axis, the 2nd condition fields is taken as legend.
    while adding more condition fields and data fields, i feel its not showing meaningfull data.
    can anyone explain how the condition fields and data fileds are manipulated by crystal report.
    i am using CR XI R2 Server.
    Thanks
    Padmanaban V

    i am using Crystal Report XI R2 RAS Embedded in my server.
    as we can add any number condition fields programatically using the method
    ConditionField.Add(FieldObj), i would like to know how these fields are manipulated internally by the RAS server.
    that means, what is the significance of condition fieldobject 1, condition fieldobject 2,condition fieldobject 3 etc...
    if i add more than two condition fields , RAS Chart Report always returns 0 as legend value for all legends.
    Thanks in advance
    Regards,
    Padmanaban V
    Edited by: Padmanaban Viswanathan on Dec 22, 2008 9:53 AM

  • Identify key fields and data fields

    Hi
    i have datasource 0co_om_cca_9 .
    i want build 1 DSO, how can i identify what are key fields and data fields to build DSO based on that datasource.

    Hi sunnel,
    The DSO are like 2-D database tables.
    We use the technical keys here in counterpart to the business keys in Infocubes.
    The key fields are the one based on which the records are identified uniquely in the database table.
    And the data fields are the ones which are aggrgated or summarised or overwritten based on the value in key filed.
    For example:
    The ID no.s of the employees will be unique and it can be used as a key field.
    The feilds like the Salary taken by the employee every month :"SALARY"
    and the no. of leaves they taken: " NO. OF LEAVES" can be used as data fields.
    So that the salary or the leaves taken by a particular employee can be aggregated based on her/his ID no.
    The key fields in DSO doesnty mean Key figures.The key field means any unique key or a key based on which the records are sorted in the DSO
    And key figures are the data fields.Some of the Characteristics can also be data fields in DSO.
    Please give points if u r satisfied wit the information
    Also let me know if u hav any doubt and if any thing is wrong.
    Regards,
    Kalpana M

  • Defining Key -field and data fields

    Hi all
    i have to define Key-Fields and data-Fields for a DSO(say DSO3).
    DSO1 is a combination of DSO2 and DSO3..
    DSO1 and DSO2 are SAP defined DSOs.
    DSO3 is a User defined DSO.
    my assumption:
       DSO3 has 30 fields
       DSO2 has 16 fields.
       can i create the DSO3 with remaining 14 fields which is there in DSO1?
       or i have to create the DSO3 with 30 fields(all DSO1 fields).
    can any body explain....
    Thanks & Regards
    krishna

    The problem is not how many fields you create where, the issue is where is the data is going to come from.
    Since you data is going from DSO3 to DSO1and if the field is already getting populated in DSO1 from DSO2, then you don't have to worry about populating those fields again, unless and otherwise you want to overwrite them.
    Remember any fields exist in both DSO3 and DSO2 which overlapping will be overwritten by the latest update.
    Again, going back to your question, you should consider does your datasource has missing fields (14 of them).
    thanks.
    Wond

  • How to update a People and group field using a sandbox solution

    Hi,
    I am creating a sandbox solution for office 365 and creating a custom form using visual web part, which will allow users to enter data in a custom list.
    And that list also have a user field. I am able to get SharePoint user field on the form (using javascript) which is searching for the user and get a value (working fine).
    Issue: But I am not able to save the user value. Because to save user value I require web, UserID and login name, to construct SPFieldUserValue object or string in "111;#TestUser" format. Moreover that user should be present in
    SiteUserInfoList. 
    I tried web.EnsureUser() but did not work under sanbox solution.
    Can you please provide any pointer or workaround to the problem? I may be missing something here.
    Thanks,
    Himanshu

    Hi,
    According to your description, my understanding is that you want to update the people and group field in Sandbox solution.
    In the sandbox solution, you can still use the web.EnsureUser() function to get the user information, see the thread below:
    EnsureUser in sandboxed solution
    In additional, there is a demo with your similiar requirement for your reference:
    Using the People Picker Control in Sandbox Solutions / Office 365
    Thanks
    Best Regards,
    Jerry Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • With holding tax report with material and qty fields

    Dear All,
    Is there any standard report available with with holding tax data with material and qty fields.
    Thanks,
    Sekhar.

    dear Friend,
    Withholding tax will deduct on services. Hence Material and quantity is not relavent.
    There is no report is available also.
    reg
    Madhu M

  • Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

    MDT 2012 U1
    Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
    I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
    We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
    The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
    But since we use the fields they must still  be fuctional just not seen.
    Thanks.....
    If this post is helpful please click "Mark for answer", thanks! Kind regards

    You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
    Example:
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipCapture=NO
    SkipAdminPassword=YES
    UserID=<MyUserID>
    UserPassword=<MyPassword>
    UserDomain=<MyDomain.com>
    SkipProductKey=NO
    SkipComputerBackup=YES
    SkipBitLocker=NO
    -Nick O.
    Nick,
    SkipAdminPassword=YES is for:
    You can skip the Administrator Password wizard page by using this property in the
    customsettings.ini.
    I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
    DomainAdminPassword=xxxxx
    DomainAdminDomain=xxxxxx
    JoinDomain=xxxxxx
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • Path and Name field in SPD 2010 Workflow for creating Doc Sets

    Hi Guys,
    Here's hoping you can help out and give a few pointers. I'm currently trying to implement what I thought was quite a simple workflow involving the creation of a Content Type (similar to Doc Set but with additional field) within an alternative library when
    a new item is added to the current library.
    Create Item in CaseFileLibrary (Output to Variable: CaseFile)
    When running the workflow, I keep getting the following error:
    "The workflow could not create the list item because the file name is either missing or invalid. "
    It seems to be related to the 'File and Path' field within the 'Create New List Item' field mappings. For this I have tried the CurrentItem:Title as some other forums suggest and have also tried entering the URL path e.g. /subsite_name/library_name/CurrentItem:Title.
    (as the name of the CaseFile (Doc Set) is going to be the same as the current item name)
    If anyone has any suggestions, I would be truely greatful.
    Luke

    Hi Luke,
    This error indicates there is an error in the workflow logic. Ensure that the file name entered in the Path and Name field is a valid file name. Common reasons for a file name to be invalid include a missing or incorrect file extension or a file/path string
    that is too long and exceeds the allowable number of characters.
    More information, please refer to :
    Common error messages in SharePoint workflow development
    For the URL that you used in the ‘Create New List Item’, whether the CurrentItem:Title is a lookup, not typed by yourself. If not, please type /subsite_name/library_name/, then lookup CurrentItem:Title, like the below, then save and publish the workflow,
    compare the result.
    In addition, please use another name for the name, compare the result.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • File Path and Name field does not display correct path

    We are using Crystal 2008 along with VS 2005. We embed the special "File Path and Name" field  inside our report and it displays the correct path when viewed inside Crystal reports:
    C:\Program Files\reports\Chart.rpt
    When run through the web and viewed in the DHTML viewer, the file name and path appear as follows:
    C:\Windows\TEMP\Chart {02152A43-3339-4C03-A50A-E281E1D391AF}.rpt
    How can this be corrected?
    Thanks in advance for any assistance.

    This is a known issue tracked under ADAPT0000962216. At this time I do not know when this will be resolved, however Service Pack 2 for CR 2008 is targeted to be released by September and this may contain the fix.
    Ludek

Maybe you are looking for