Branching View - Why does it appear this way?

This is my first large project with Captivate 3 and I am
trying to create a storyboard. I need to show my manager/client the
branching view so they can follow along. What I created was a menu
page that allows the users to go to many different subjects in no
particular order. At he end of ech subject, I created a button that
sends the user back to a COPY of the menu so the user doesn't have
to hear a repeat of the audio every time the go back to the menu
page and select a new subject. The problem is in the branching
view....for some reason, the duplicate menu page appears at the end
of line "A" or after slide 13 instead of following slide 5 (menu
slide).
Any thoughts on how to move this? Or, does anyone have a
better idea than creating this copied slide?
Thanks.

nathand wrote:
Ben wrote:
nathand wrote:
You cannot get a reference to an individual element in an array control.  The ArrayElem reference will always refer to the same control regardless of what array index is visible.  This isn't specific to a combo-box, every array works like this.
I have not tested it lately but as of the time of this Nugget I found that it will point to the top left visable array element.
The ArrayElem property always returns the same reference no matter which element of the array is in the top-left corner, as demonstrated by the code below (screenshot instead of snippet to avoid mangled references and property nodes).
Yes that is true but the value returned when using a property node >>> value will return the top left displayed value. In the code included in that Nugget, I set the size of the control such that it only shows a single element then by manipulating the index control I can raed each element in the array.
At least that is how it behaved back in the day of that nugget.
Yes, my wife left me home alone with a case of beer and LV to find that tidbit. I suspect that feature will one day disapear without anyone noticing.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

  • Combobox in array--why does it work this way?

    I have attached a snippet of a subVI I'm using to initialize the items and set the values of comboboxes in an array. I modified it slightly so the array being referenced is on this block diagram, not a top level diagram. It took me a while to come to this solution; before I had the combobox part in a for loop and was trying to loop through each array element, get a reference to that element, and set the strings[] and value properties but it was acting all wacky. Then I changed it to the way below and it automatically populates all the comboboxes with the correct values, and then sets their values each to be different (which is what I want!) My question is, why does it work this way? I understand all elements in an array need to be the same (although I did find a work around here.), but the part about setting the values to each be different I was trying to do manually with a property node and a value property, when I realized the combobox just handles it all itself. Is this just a feature of a combobox in an array I need to note for future reference? 
    edit: I noticed the testers array reference label changed, so hopefully it's still referencing the same control. You may need to relink it.
    CLA, LabVIEW Versions 2010-2013
    Attachments:
    combobox in array snippet.png ‏29 KB

    nathand wrote:
    Ben wrote:
    nathand wrote:
    You cannot get a reference to an individual element in an array control.  The ArrayElem reference will always refer to the same control regardless of what array index is visible.  This isn't specific to a combo-box, every array works like this.
    I have not tested it lately but as of the time of this Nugget I found that it will point to the top left visable array element.
    The ArrayElem property always returns the same reference no matter which element of the array is in the top-left corner, as demonstrated by the code below (screenshot instead of snippet to avoid mangled references and property nodes).
    Yes that is true but the value returned when using a property node >>> value will return the top left displayed value. In the code included in that Nugget, I set the size of the control such that it only shows a single element then by manipulating the index control I can raed each element in the array.
    At least that is how it behaved back in the day of that nugget.
    Yes, my wife left me home alone with a case of beer and LV to find that tidbit. I suspect that feature will one day disapear without anyone noticing.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • When I sync my ipod to add new material, sometimes itunes will automatically rearrange the song order of my pre-existing albums by number of plays. Why does it do this? And is there a way to stop it?

    When I add an album to itunes and subsequently to my ipod, everything is arranged by track number of the album. Sometimes when I sync in order to add new material to my ipod, itunes for some reason automatically rearranges some of my pre-existing material by songs with the greatest number of plays to least (though sometimes it seems to be completely random). When I check itunes on my computer, everything still appears to be in order but the way it appears on the device often is in the previously mentioned disorder. Why does it do this? Is there any setting that I can adjust to make it stop because the only way I've found so far is to delete the rearranged material and re-import the cd and then re-sync. It might sound picky, but I prefer that my music be in order by track number as the artists themselves intended for various reasons the foremost being that I often listen to whole albums from start to finish and this glitch makes such problematic. I have found some settings in preferences that focus on how material is arranged but this seemed to be focused on the actual folders where the music is located on my hard drive and not the way it appears on the ipod. If anyone knows the reason it does this or has suggestions on fixing it, I would be greatly appreciative. Thanks.

    Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs  will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

  • How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers?  Until very recently it did so.  Contacts on my macbook pro does show up this way.  I do have a mobile me account an

    How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers?  Until very recently
    it did so.  Contacts on my macbook pro does show up this way.  I do have a mobile me account and in the past syncing was no problem.  What setting has changed?

    The phone number format as well as the date language and format and the time format are controlled by the Region Format setting. Go to Settings > General >International > Region Format.  When you change a region format, you can go back one page (to International) and see an example of the date/time/phone number format that your selected region format will produce.

  • When using office for mac or i studio after inserting several pictures, my computer locks up and the only way I can fix it is to do a force quit.  Why does it do this and how I I get it fixed without a force quit?

    I have a mac book, with office for mac and iStudio installed.  When I try to create a document using either one of these; after inserting several photos, the computer locks up and the only way I can get it to unlock is to do a force quit.  Why does it do this, and how can I get it to unlock without having to do a force quit?

    Are you using versions of the software that are compatible with the version of OS X you have installed? Very often such lockups are caused by application incompatibility.
    The problem may also come from trying to use both sets of applications at the same time while not having enough RAM installed. Adding more RAM may fix the problem.
    The problem can arise from corrupted support files such as preference files or Application Support files or corrupted cache files.
    The image files you are using may also be corrupt thus causing the problem.
    You might start with:
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation.  TechTool Pro 4.5.1 or higher are Intel Mac compatible;  Drive Genius is similar to TechTool Pro in terms of the various repair services provided.  Versions 1.5.1 or later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.  Other utilities are also available such as Onyx, Lion Cache Cleaner, CockTail, for example.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Backuplist
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    iBackup
    JaBack
    Silver Keeper
    MimMac
    Retrospect
    Super Flexible File Synchronizer
    SuperDuper!
    Synchronize Pro! X
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.

  • ITunes says I have authorized five computers so I can no longer play music I have purchased. I have not replaced my computer once. Why does iTunes say this?

    iTunes says I have authorized five computers so I can no longer play music I have purchased. I have not replaced my computer once. Why does iTunes say this?

    Hey Christownsend,
    Thanks for the question. To troubleshoot this issue, you may want to try deauthorizing all computers:
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/HT1420
    To deauthorize all computers associated with your Apple ID
    If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
    1. Click iTunes Store on the left side of iTunes.
    2. If you're not signed in to the store, click the Account button, then enter your account name and password.
    3. Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
    4. In the Account Information window, click Deauthorize All.
    Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).
    Thanks,
    Matt M.

  • Why does border appear around embedded video?

    Hello,
    I have an embedded YouTube video in a page on my site. It was working fine for a while but I've just discovered that there is now a black edge showing on the left, right and bottom of the video? I created a white round cornered frame within Premier so that it's part of the video. I did this as the pgae it's embedded in is white so that when it plays back it appears seamless and with curved edges to match it's container. This worked fine for a week or so but now it has these black edges? Can anybody tell me why? You can see for yourself at www.glovesanddoves.com. Go to the fighters page and you'll see the video at the bottom. The video's width is a multiple of 16 and the ratio is 16:9 at 384px X 216px. The containg Divs are also set to these measurements.
    I've attached a screenshot below:
    Any help would be much appreciated.
    Jack

    It only seems to be affecting the page when viewed in Safari although it was working fine for over a week before today?
    Date: Thu, 11 Oct 2012 16:39:47 -0600
    From: [email protected]
    To: [email protected]
    Subject: Why does border appear around embedded video?
        Re: Why does border appear around embedded video?
        created by Ken Binney in Dreamweaver General - View the full discussion
    No prob in FF 15.0.1or IE 8  on PC - Rounded corners boxes on both
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4767926#4767926
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4767926#4767926
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4767926#4767926. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver General by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • What is the colored spinning disk, and why does it appear, and how do I get rid of it?

    What is the colored spinning disk, and why does it appear, and how do I get rid of it?

    Repairing permissions will help as will running the UNIX commands. This widget will do all but the pram.
    http://db.tt/Lob4XtPB  Maintenance Widget  One of those links will get you the widget.
    To reset the pram hold the Command+Option+P+R when starting up, wait through 4 startup sounds before letting go.

  • All I want is all my contacts on my phone and the same on my iMac, but no, that's too much to ask, instead I get everything doubled up on the phone and everything doubled up (triple in some cases) on the iMac, why does it do this? and more importantly how

    All I want is all my contacts on my phone and the same on my iMac, but no, that's too much to ask, instead I get everything doubled up on the phone and everything doubled up (triple in some cases) on the iMac, why does it do this? and more importantly how can I stop it? Thanks

    Look under system preferences on the mac at what is be controlled?  Look at Mail, Contacts, Calendars.  How many accounts are managing contacts?  Just the cloud? the cloud and gmail? or cloud, gmail, yahoo, and exchange?  If you have more than one contact account, then you will have different contact lists, if John Smith shows up in more than one of your contact lists, you will have multiple entries.
    Pick a contact list that is your master, (I use iCloud), only turn on contact syncing for it.  The same for your phone.  Spend some time on the iCloud webset (www.icloud.com) and work on your contact list there.  Clean it up, remove duplicates, etc...Changes will auto sync back to all your devices.  Life gets much simplier.
    Just remember, if you sync different contacts lists and a large number of people appear in your different lists, then they will appear as duplicates.

  • Why does Illustrator open this file incorrect (coloured polygon becomes uncoloured)

    I have an eps file that opens incorrect in Illustrator (CS6, CS4, 10 I tested). I wonder why this happens. The path seems to be complex, but Photoshop and Distiller converts/opens this file correct. So this seems to be a bug in Illustrator. I ca send you the file.
    How can this be solved?
    Patrick.

    Please explain me where I can put my file? Can I email it to you? Can I upload this to this forum?
    Patrick.
    Date: Wed, 18 Dec 2013 08:24:05 -0800
    From: [email protected]
    To: [email protected]
    Subject: Why does Illustrator open this file incorrect (coloured polygon becomes uncoloured)
        Re: Why does Illustrator open this file incorrect (coloured polygon becomes uncoloured)
        created by tonyharmer in Illustrator - View the full discussion
    Hi Patrick
    Pop a link to the file up and let's have a look.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5941529#5941529
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5941529#5941529
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5941529#5941529. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Illustrator at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Newly added Cal.View Measure does not appear in the BEX Designer

    Hi,
    anybody come about this :
    A newly added Cal.View Measure does not appear in the BEX Designer:
    I got a runnig query in Bex Designer, based on a transient InfoProvider which is based on a HANA Calculation View
      and
    added a new measure to the Calculation View
      and
    added a Reference InfoObject in the Publisher to the (transient) InfoProvider.
      and
    see the newly added filed in the Listccube of the(transient)   InfoProvider with a technical generated name
      and do not
    get the newly added measure in the BEX Designer.
    Whats wrong ? What needs to be done ?
    Thank You
    Martin

    Hi Martin,
    Are you trying to consume the HANA Calc View in BEx Front End Tool - Query Designer.Could you also check the data preview of the Calc View shows the newly added Measure.Check the definition of Calc View under SYS_BIC schema ->Column Views.
    Rgds,
    Murali

  • Why does "nobr" appear?

    <p>When I post a message and include both code and a link, I often get a &#91;nobr] at the top, and &#91;/nobr] at the bottom.
    <p>Adding this link:
    Why does "nobr" appear?
    trying a line of code<p>Now, note the "nobr" top and bottom. I did not put them there. It appears that if I mix ubb tags (with the &#91;] brackets) and html tags (with the &lt;> characters), the offending nobr shows up.
    <p>What is it?
    <p>And what can I do to prevent it?
    <p>Thanks in advance.

    Just a test...
    Adding this link:
    Why does "nobr" appear?
    trying a line of codeHmmmm... I see that if I use UBB tags for the link as in: &#91;url=http...]Link title&#91;/url], then the nobr goes away.
    So now the question is... is there any place this stuff is documented?

  • When I get an alert from my car sat nav the music on my iphone has a long delay before it comes back on and misses a part of the track why does it do this.

    When I get an alert from my car sat nav the music on my iphone has a long delay before it comes back on and misses a part of the track why does it do this.
    It only seems to do this since an iphone download last year.......its driving me mad !

    See:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    To copy iTunes purchases to the computer you have to log into (authorize) the account that purchased them and them transfer
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    When associating a device with an Apple ID see the following regarding the 90 day limit.

  • Weird Behavior. Why does Safari do this?

    Please, can someone explain to me why Safari (1.3.2) hops tabs? I click a link in one tab and instead of going forward to that link, replacing this tab's contents, it jumps (not all the time but usually) to a different open tab and replaces what was there. Unless I hold the command key before clicking a link. WHY does it do this?
    Any help will be greatlt appreciated. I'm about to move on to Firefox because of this weird behavior.

    So I figured I would switch to flickr for photos.
    Safari won't even upload in Safari!!!!
    I Choose the photo. And that's it. Safari will not go to the next step in flickr either.
    Both photobucket and flickr work and upload photos fine using FIREFOX.
    God I'm just so tired of Apple stuff not working.

  • Why does Firefox give this message when I do not have another program running "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."

    Question
    why does Firefox give this message when I do not have another program running or another window open - "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." edit

    See also "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    *https://support.mozilla.com/kb/Firefox+hangs

Maybe you are looking for