Break Point in Each Instruction

Is there any easy way to add a break point in each
instruction.
There is a function which actually draws the stuff on the
screen, and i need to break in each instruction to see the values.
Right clicking and adding a break point is not suitable as then i
may have to add for 200 lines, so please guide in this regard
Thanks

Put a break point at the first line of the function, then
just click the "Step Over" button to go line by line, or "Step
Into" button to dive into other classes and functions if the code
does something like that. If you get stuck inside some other code
and you want to get out, click the "Step Return" button.
Hover over the buttons to see thier tool tips.
Switch between the Development and Debugging perspectives
easily by pressing Ctrl-F8.
See this FB3 help sys topic:
Managing the debugging session in the Debug view

Similar Messages

DL Break Point Issue - Please Help.

Hello,
I use to work in DVDSP when you could only do one layer and even then I knew just enough to get the job done. Now I have a program that is 6.6 gigs total size (according to DVDSP) and I can't get this thing to find the break point. I have read through most of the manual regarding this issue and have read many posts - first I have to ask is why is this so difficult?
Here are the issues in detail and I ask that if you give input please guide me like I have limited knowledge in this.
I am using DVDSP 4.1.0 on a G5 Dual 1.8 OS is 10.4.8 with a Pioneer DVR 111D. I have 4 'tracks' all coming off one main menu...no sub menu's - so I have the one main and four buttons that go directly to the videos. When I try to 'burn' the DVD I get this error 'Formatting was not successful. A suitable marker could not be found in the required layer break range. See the DVD Studio Pro User's Manual for more information.' The size of each track is as follows:
Track One: The Main footage is 4.0 Gig (this is the one I am trying to set the break point because the limit is 3.9 Gig)
Track Two: is 1.7 Gig
Track Three: 606 Meg
Track Four: 216 Meg
I have tried 'Automatic' without luck.
I have tried to place a few markers approximately 3/4 of the way through Track One the marker that I place is Green and in the Inspector window when I click on that marker I see the 'Marker Function' and then the button to select Dual-Layer Break Point and I select that only. However when I click something else and then come back to Marker the Dual Layer Break Point is not selected!
I then have gone into the 'Disc/Volume' and tried to select the 'Break Point' and chose Track One but still nothing. I have read in the forums about building the disc and then going into the TS folders and blah blah blah to get this done but that is above my head and I don't understand it.
I just need to get this video done. It is for a family who's 17 daughter was tragically killed and will be a fund raiser for them...I need to get this done. So if any of you are willing to help that would be SO appreciated AND if any of you would be so kind to walk me through this over the phone THAT WOULD BE GREAT! Just email me at [email protected] and I will email you my number. I know this is a tad different but I don't have much time left to get this done because of my 'real job' and again, I need to get this done!

Hi csiaudio,
Build the project (AltAppleC). Then in the format window (Apple+F), Disc/Volume tab you'll be able to see the available break point markers. If they are all greyed out then you do not have one in the project.
Add Cell markers in places that you think would be ok as the layer switch. You do this by adding a chapter marker and then in the property inspector un-checking the type Chapter. This will now be a marker that can be used as a dual layer break point but is not a chapter marker.
You'll need to re-build the project and check the format window options again,
-Jake

Break point in smart form

Dear Gurus....
I am new to smartforms. I have a report which is to be integrated with smart form. I want each PO should start from a new page. I have tried putting an alternative and command in main window but it doesnot solve my problem. Please help me out as i need the solution very urgently...
please mail me the solution here or to my mail id [email protected]
Thanks in advance.

Hi Ajay,
If your question is regarding break point, then create a program line node before the alternative condition and code "break-point". Next time when you execute the program it will stop at this point.
Please let me know what are you displaying in the form. I understand that you want to have a page break for each PO. Are using Table node?
Thanks
Vinod

Problems with break point in Dual Layer project

Hi,
I'm currently having a problem setting a break point in a Dual Layer DVD project in DVD Studio Pro 4. I have a project that has 5.9 GB of data (5 shows with between 7-8 chapters in each). The problem I'm having is that in the 5th chapter of the 4th show, there is a freeze frame hickup when I burn the disk. I've tried moving around the chapter mark, deleting them and re-adding them, re-exporting the media (it is in MPEG-2) in all combinations of those and am still having the freeze problem at that chapter mark. I've gone back to the original media and there are no problems there.
What I think the problem is is that the disk is automatically setting the break point for the dual layer disk at that chapter mark. However, when I go into the project and try to set the break point manually from the dropdown, I can't seem to select anything. The default is the begining of the 5th track, and I can only change it to automatic and back again. Anything else I select just goes back to that 5th track, but I still think it's actually doing automatic instead. I'm using a Verbatim DVD+R DL if that helps anything as well.
To all, do you agree that the problem is most likely due to the break point? And if so, how do I change the break point to the beginning of either the 3rd or 4th of the shows instead of having it seem to be stuck on automatic?
Thanks in advance,
Chris

Alright, to answer my own question. Here's what I think the problem was.
There are actually two Disk/Volume menus: one in the Disk settings when you're actually working in the project and another when you go to build and format. I kept trying to set the break point in the first one--in the disk settings in the project--and it wouldn't let me because it can only be set when building and formatting.
It's kind of an annoying settup that there are two identical menus that don't fully communicate with each other, but in the end the solution has been solved.
Chris

Can any one explain me about break point

Hi gurus
What is break point what is the use of it? please let me know what is the use of it?
Thanks in advance

Hi
Hi,
A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.Max 30 breakpoints we can use.
Session Breakpoints exist only until you are logged in or until ur session is active. Even if u forget to remove the session break points, they are automatically removed once ur session becomes invalid or u logged out.
Debugger
This section of the ABAP Workbench documentation provides information on how to use the Debugger as a test tool for finding errors in the source code of an ABAP program.
Functional Overview
Use
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Regards
karthik

What is the utility of watch point and break point in ABAP DEBUGGING !

What is the utility of watch point and break point in ABAP DEBUGGING !
PLEASE TELL ME IN DETAILS AND IF POSSIBLE WITH SCREEN SHOTS !

Hi,
Breakpoints, Watchpoints, and Checkpoints
Summary
The standard Breakpoints tool is always located on the Breakpoints desktop. With this tool, you can manage breakpoints, watchpoints and checkpoints. In addition, you can monitor the current status of the different breakpoint types.
Detailed Description
Breakpoints
In the Breakpoints area, you will see a list of all the breakpoints set so far. If one of the breakpoints has just been reached, this is marked with a yellow arrow. The visibility (Debugger, session, user) and type (line, ABAP command, ) is displayed for each breakpoint.
If you double click the Navigation() column, the system will display the breakpoint in the respective source code.
The visibility of a breakpoint can be changed through the dropdown list. To change the visibility of several breakpoints, mark them and select the pushbutton Save as Session Breakpoint or Save as User Breakpoint.
You can change the visibility of all Debugger breakpoints using the menu path Breakpoints-> Save Debugger BPs as -> ....
In addition, you have functions for creating, changing, activating and deactivating breakpoints at your disposal.
Watchpoints
In the Watchpoints area, you will see a list of all the watchpoints set so far. The watchpoint last set is highlighted with a yellow arrow.
For each watchpoint you will see not only the current value but the value before the last changed. (Technically speaking, each time you create the watchpoint and each time the watchpoint variable is changed, a clone of this variable is created.)
In this way, you can always determine what changes have been made to the monitored variable. For complicated data structures, such as internal tables or structures, select the pushbutton Compare Variables( ) and choose the Diff tool to compare the old and new variable values.
In addition, you have functions for creating, changing, activating and deactivating watchpoints at your disposal.
Checkpoints
In addition, you can edit conditional and unconditional checkpoints using the Breakpoints tool. This function is provided in the new Debugger only. Conditional checkpoints are set first in the source code using the ASSERTstatement; unconditional checkpoints are set using the BREAK-POINT statement. These have the effect that programs will be continued only if a preset condition is fulfilled. In the following window, these checkpoints can be searched for, activated, or deactivated.
Pls refer to :
http://help.sap.com/saphelp_nw70/helpdata/en/e2/5f5a42ed221253e10000000a155106/frameset.htm
Regards,
Renjith Michael.

What is utility of watch points and break point in ABAp debugging !

What is utility of watch points and break point in ABAp debugging !

Hi,
Breakpoints, Watchpoints, and Checkpoints
Summary
The standard Breakpoints tool is always located on the Breakpoints desktop. With this tool, you can manage breakpoints, watchpoints and checkpoints. In addition, you can monitor the current status of the different breakpoint types.
Detailed Description
Breakpoints
In the Breakpoints area, you will see a list of all the breakpoints set so far. If one of the breakpoints has just been reached, this is marked with a yellow arrow. The visibility (Debugger, session, user) and type (line, ABAP command, ) is displayed for each breakpoint.
If you double click the Navigation() column, the system will display the breakpoint in the respective source code.
The visibility of a breakpoint can be changed through the dropdown list. To change the visibility of several breakpoints, mark them and select the pushbutton Save as Session Breakpoint or Save as User Breakpoint.
You can change the visibility of all Debugger breakpoints using the menu path Breakpoints-> Save Debugger BPs as -> ....
In addition, you have functions for creating, changing, activating and deactivating breakpoints at your disposal.
Watchpoints
In the Watchpoints area, you will see a list of all the watchpoints set so far. The watchpoint last set is highlighted with a yellow arrow.
For each watchpoint you will see not only the current value but the value before the last changed. (Technically speaking, each time you create the watchpoint and each time the watchpoint variable is changed, a clone of this variable is created.)
In this way, you can always determine what changes have been made to the monitored variable. For complicated data structures, such as internal tables or structures, select the pushbutton Compare Variables( ) and choose the Diff tool to compare the old and new variable values.
In addition, you have functions for creating, changing, activating and deactivating watchpoints at your disposal.
Checkpoints
In addition, you can edit conditional and unconditional checkpoints using the Breakpoints tool. This function is provided in the new Debugger only. Conditional checkpoints are set first in the source code using the ASSERTstatement; unconditional checkpoints are set using the BREAK-POINT statement. These have the effect that programs will be continued only if a preset condition is fulfilled. In the following window, these checkpoints can be searched for, activated, or deactivated.
Regards,
Renjith Michael.

DL Break Point error.. please help!

Hi All,
I have a really big DSP4 projects with a 78 min feature, and about 15 more 2-5min clips. For some reason, I am having a really hard time setting a break point.
If I choose automatic break, I get:
"Formatting was not successful. A suitable marker could not be found in the required layer break range. See the DVD Studio Pro User's Manual for more information."
...and if I set the breakpoint myself, I get:
"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."
Please help me out!

Hi, I definitely understand what you are going trough, I spent a whole week trying to find the brake point, after reviewing my tutorial I realized wherre the problem was. Devide the total lenght of the movie by 2 and then add about 5 to 10% to the 50%, than start adding markers on the timeline close together, you are allowed 99 markers, hilight each marker after being used so that you can keep track, if you are reaching the disc limit, than you may be limited to a few choises.I hope this works for you.
G5 Dual 2.0 Mac OS X (10.4.4) ATI 9800 Pro Display Card
G5 Dual 2.0 Mac OS X (10.4.4) ATI 9800 Pro Display Card

DL DVD playback stalls at break point

My dual layer DVDs all have problems with the playback at the break point between layers. This happens whether I burn direct from iDVD or if I first make a disk image.
I have used two different burners and two different brands of media (Ritech and Verbatum) and still the same result.
The problem is inconsistent between disks and players. For the most part, they play flawlessly in DVD player on any of my three Macs, but behave poorly on each of my three commercial DVD players.
In some cases, the playback merely stalls for about 10 seconds and then resumes, having skipped forward an amount about equal in time to the length of the stall.
In other cases, playback stops completely and the balance of the disk cannot be played without restarting, going to the chapter menu and selecting a chapter beyond the break point and resuming playback.
I am creating disks as part of a Videography business and can't afford to produce a product that my customers can't rely on to playback.
Is it simply the case that some DVD players are just not good at handling DL media?
I have Toast Titanium 7 as well, and can compress the files to fit on a single layer disk. But won't the quality suffer from the compression?
Does anyone have a suggestion to help me produce quality disks that are reliable?
Thank you in advance for any suggestions!
Jeff
Message was edited by: that Jeff guy

Ive had the same problem & its definately the DVD players that are the problem (some simply dont like DVD+R DL). What I normally do is put a disclaimer label on the cover of the proof saying along the lines of......
'For quality reasons, this DVD has been mastered on a Dual layered disc, and may not be compatible with certain models of DVD player. If you experience any unexpected playback issues, please contact us as soon as possible!'
If the client does experience issues with the disc - at least they will know that its a problem with THEIR equipment, & I'll then split the project over 2 discs.
Keeps your professional image & keeps the client from getting annoyed!

Break Points for Dual Layer Discs

I've read and re-read the DVDSP4 manual on break-points. They are giving me the hardest time even still. Is there any way to by-pass the muxing process and not have to wait that long to find out if there is the correct balance of space used for each layer on the disc? IOW, is there a way to automatically check if the layers are right without choosing the "auto break point" option?

Hi Drew, when you say set a bunch of markers in the general area, what types of markers are you talking about (ie. chapter, button, dual layer break point)? I can only set one "dual layer break point", should i be able to set more than one? I'm working on this dual layer project and it is driving me nuts!

User-specific break-point

Hi
while debugging whether it is possible to have a user-specific breakpoint??? if so gimme idea how to make it???
Thanks in advance

ABAP Debugger
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a line of code that tells the ABAP runtime processor to interrupt the program at that line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Running a Program in Debugging Mode
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also useful if you do not know the program very well and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator Select a report or transaction and program and choose Program Test Debugging.
From the ABAP Editor Choose Program  Execute  Debugging (or the Debugging pushbutton).
From any screen Choose System  Utilities  Debug ABAP.
From any screen Enter " /h " in the command field.
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose
System  Utilities  Debug system from any screen. To stop the system Debugger, choose Debugger  Debugging off.
Displaying Program Attributes
You can display the attributes Fixed point arithmetic, System program and Unicode checks active of the program that has just been executed by choosing Goto  Further Information  Program Attributes.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto  Display data object.
Single field Displays the contents and technical attributes of a field.
Structured
field Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table Displays the type, line numbers and contents of an internal table.
Object Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Breakpoints
Instead of starting an ABAP program directly in the Debugger, you can also debug a program by creating one or more breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoint
at statement The Debugger stops the program directly before the specified statement is executed.
Breakpoint
at subroutine The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module The Debugger stops the program directly before the specified function module is called.
Breakpoint at method The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Use
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted a BREAK-POINT statement in an ABAP program, the system always interrupts the program at that point. You should only use static breakpoints during the development phase of an application. You should set static breakpoints whenever more than one programmer is working on the same program and you always want to stop the program in the same place.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. You should, therefore, use them when you only want the program to be interrupted when you run it yourself. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter (for example, only activate the breakpoint after it has been reached five times).
Special Dynamic Breakpoints
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the program code. Event here is used to refer to the occurrence of a particular statement, for
example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger.
Transferring Breakpoints to HTTP and Update Sessions
If an HTTP or update session is called from a Logical Unit of Work (LUW), new work processes are started for these new sessions. Breakpoints that were defined beforehand in the calling LUW are copied to these sessions where they can be displayed under breakpoints.
If, for example, the update module func is called via CALL FUNCTION func IN UPDATE TASK, the new work process is displayed in a second window if Update debugging was selected under Settings in the debugging mode. All the breakpoints that were set in the calling LUW can then be processed here.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC <> 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities  Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
1. Position the cursor on the line of the source code at which you want to set the breakpoint.
example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger.
Transferring Breakpoints to HTTP and Update Sessions
If an HTTP or update session is called from a Logical Unit of Work (LUW), new work processes are started for these new sessions. Breakpoints that were defined beforehand in the calling LUW are copied to these sessions where they can be displayed under breakpoints.
If, for example, the update module func is called via CALL FUNCTION func IN UPDATE TASK, the new work process is displayed in a second window if Update debugging was selected under Settings in the debugging mode. All the breakpoints that were set in the calling LUW can then be processed here.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC <> 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities  Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
1. Position the cursor on the line of the source code at which you want to set the breakpoint.
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
1. Choose Breakpoint  Breakpoint at  Function module...
2. Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
3. Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint  Breakpoint at  System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint  Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint  Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto  Control debugging  Breakpoints.
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint  Set/delete. To delete all breakpoints, choose Breakpoint  Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint  Activate/deactivate.
http://www.sap-img.com/abap/testing-and-debugging-abap-codes-functions.htm
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/frameset.htm
For debugging tutorial:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/5a/4ed93f130f9215e10000000a155106/frameset.htm
http://www.sapdevelopment.co.uk/tips/debug/debughome.htm
http://www.sap-basis-abap.com/sapab002.htm
Chaeck the following documents,
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Hope you can get all the required information from the above documents.
Reward points if helpful.

Break points

hai gurus...
how many watch points and break point can be used in each program...
types of watch points and break points....
Thanks
Pavan

Hi
a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
· You can set up to five watchpoints in a program.
See also Setting Watchpoints.
· You can also specify the conditions under which a watchpoint is to become active.
· You can specify a logical link for up to five (conditional) watchpoints.
See also Specifying Logical Links.
· You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in
the specified program.
· You can change and delete watchpoints.
See Changing Watchpoints
· You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Breakpoints
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
· You do not have to change the program code.
· You can set them even when the program is locked by another programmer.
· You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
we can keep them at :
Statements
Subroutines
Function Module Calls
at Methods
System Exceptions
break point :
we can start debugging from that point or if we keep break point at some place we can directly got ot htat point using f6.
watch point: for example if we have to check the output for 4000 records based on a field value i.e.for vendor number 'in'we have to check then we will create watchpoint on field LIFNR value '2000'. then we can directly go to vendor whose numbe ris 2000
Regards,
Sree

Break points and watch points

Hi all
 Can anybody help me using break points and watch points.what do they exactly do as well..
Thanks
abap user

Hi
Breakpoints
Instead of starting an ABAP program directly in the Debugger, you can also debug a program by creating one or more breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoint
at statement The Debugger stops the program directly before the specified statement is executed.
Breakpoint at subroutine The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module The Debugger stops the program directly before the specified function module is called.
Breakpoint at method The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Use
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted a BREAK-POINT statement in an ABAP program, the system always interrupts the program at that point. You should only use static breakpoints during the development phase of an application. You should set static breakpoints whenever more than one programmer is working on the same program and you always want to stop the program in the same place.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. You should, therefore, use them when you only want the program to be interrupted when you run it yourself. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
 You do not have to change the program code
 You can set them even when the program is locked by another programmer
 You can define a counter (for example, only activate the breakpoint after it has been reached five times).
Special Dynamic Breakpoints
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the program code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger.
Transferring Breakpoints to HTTP and Update Sessions
If an HTTP or update session is called from a Logical Unit of Work (LUW), new work processes are started for these new sessions. Breakpoints that were defined beforehand in the calling LUW are copied to these sessions where they can be displayed under breakpoints.
If, for example, the update module func is called via CALL FUNCTION func IN UPDATE TASK, the new work process is displayed in a second window if Update debugging was selected under Settings in the debugging mode. All the breakpoints that were set in the calling LUW can then be processed here.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC <> 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities  Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
1. Position the cursor on the line of the source code at which you want to set the breakpoint.
2. Choose Utilities  Breakpoints  Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities  Breakpoints  Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
1. Position the cursor on the line in which you want to set the breakpoint.
2. Select the line by double-clicking it or choosing Breakpoint  Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.

Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1. Choose Breakpoint  Breakpoint at  Statement...
2. Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3. Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
1. Choose Breakpoint  Breakpoint at  Event/Subroutine.
2. Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
1. Choose Breakpoint  Breakpoint at  Function module...
2. Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
3. Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint  Breakpoint at  System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint  Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
 By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
 By choosing Breakpoint  Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto  Control debugging  Breakpoints.
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint  Set/delete. To delete all breakpoints, choose Breakpoint  Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint  Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
 You can set up to five watchpoints in a program.
 You can also specify the conditions on which a watchpoint is to become active.
 You can specify logical conditions between up to five conditional watchpoints.
 You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
 You can change and delete watchpoints.
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
1. Choose Breakpoint  Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears.
2. Decide whether you want to set a local or global watchpoint.
3. Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
4. If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
5. To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator Meaning
< Less than
<= Less than or equal
= Equal
<> Not equal
>= Greater than or equal
> Greater than
6.
7. You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR Only one of the specified conditions must be met
AND All of the conditions must be met.
To create a logical link between watchpoints:
1. Choose Goto  Control debugging  Watchpoints or the Watchpoints pushbutton to open the watchpoint display.
2. Set the Logical operator between watchpoints option.
The default value is always OR .
Changing Watchpoints
1. Choose Goto  Control debugging  Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
2. Choose the pencil icon in the line containing the watchpoint you want to change.
3. Change the watchpoint attributes in the Create/Change Watchpoint.
3. Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint  Delete or Breakpoint  Deactivate/activate. Instead, proceed as follows:
1. Choose Goto  Control debugging  Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
2. Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
Reward ifusefull

Break points are not triggering in RFC from portal application

Helllo,
I am running Biller Direct application from portal, which is triggering a standard SAP RFC FM back end, am trying to debug my execution from portal, for this i put the External Break point, Session break-poiint at the beginning of this SAP RFC FM, but, its not stoppping at ll, here the user is a Web user, not dialog user.
How can i stop my execution in this SAP RFC FM to check how the structures are populated?
Thank you

Hi Raju,
Please try the below way and check if it works.
Open the RFC in R/3 i.e.
SE37 -> give FM NAME -> DISPLAY.
Click on UTILITIES -> SETTINGS -> CLICK THE TAB debugging.
In the screen against the field users : give the value 'WEBLOGIN'.
Uncheck the FLAG 'IP MATCHING'.
And at the bottom check the check box against the field
'Session Break Point Activate Immediately'.
Save these settings.
Then go to the line at which you want to debug the code and put an external break point over there.
But, please take care of one thing as we are giving it as a WEBLOGIN, when ever some logs in, it will reach the brteak point and stop there. We have to click F8 to continue. Or else, the portal will be hanged for them.
Thanks & regards,
Y Gautham

BI-IP: Formula FOX - Debug & Break-Point

Hello,
BI-IP compiles the command "BREAK-POINT" in the Formula FOX source code. But it does not debug when the planning function is "executed with trace" (sequences).
Is there any possibility in BI-IP to debug the FOX code?
regards
Eckhard Lewin

Hi JW,
when use execute report RSPLS_PLSEQ_EXECUTE, key in your planning sequence. Then hit enter! You will see that the possible selection variants will change. If you do not hit enter in between, you won't see your variant.
gr
Dries

Break Point in Each Instruction

Similar Messages

Maybe you are looking for