Break when element changes with in section.

i have code like this
<?for-each@section:G_1[CODE='D']?>
<?for-each:G_2?>
<?IND?><?STYLE?><?FIN?><?DR?>
<?end for each?>
<?end for each?>
every thing works fine i get new page for as i specified condition by <?for-each@section:G_1[CODE='D']?>
but inside inner loop <?for-each:G_2?>
<?STYLE?> changes with in that section i need page break again like with in one section( i have section break on outer loop) i may get 3-4 styles information on same page so need to break again when every style changes with in that section.
i was trying below logic but not working as expected.
<?if:STYLE[(.=preceding::STYLE)]?><?split-by-page-break:?><?end if?>
and
<?if:preceding-sibling::G_2/STYLE!=STYLE or position()=1?><?split-by-page-break: ?><?end if?>
can any one help me what is the mistake i was doing.

check inbox forwarded modified template.

Similar Messages

Standard Screen Element Changes with ECC6.0 in SAP Standard Transactions

Hi,
We have upgraded our system from 4.7 to ECC6.0. I need documentation on all GUI changes with ECC6.0 for all SAP transactions/modules.
I mean, for example, if Sales Order creation screen (transaction code VA01) in 4.7 have say... 12 tabs, then if it has 13 tabs (standard features I am talking) in ECC6.0. I want these kind of additional chnages done to screens like.. adding new menus in menu bar or buttons on tool bar etc.
As we need to educate our users for all the screen related standard chages by SAP because of upgrade.
Thx in advance,
Nagesh

Ofcouse Nishanth, u need to code in PBO and PAI event.
PAI -> To read the User input and for doing validations or some thing as per ur requirement
Hope this helps,
Shiva kankanala

ALV Page Break when Catagory Changes (ie SO # change)

I will have an ALV report with a Sale Order # on a header section and line items associated for the header SO#, and when a different SO# occurs it will go to next page and display the next SO# on header section and the item info on the main body. Is this possible and how would I set this up? (not using OO). Thanks in advance.

Hi,
Try this..
Add a row for the sales order # field to the sort internal table T_SORT and pass it in the parameter IT_SORT..
DATA: T_SORT TYPE LVC_T_SORT.
DATA: S_SORT TYPE LVC_S_SORT.
S_SORT-SPOS = '1'.
S_SORT-FIELDNAME = 'VBELN'. "Sales order #
S_SORT-UP = 'X'.
S_SORT-GROUP = '*'. "This will trigger a page feed
APPEND S_SORT TO T_SORT..
Thanks,
Naren

Enlightenment E17's EFM breaks when theme changes

Hello.
I've installed the "enlightenment17" package, as indicated in the wiki article. After a few clashes against the Enlightened way of life (which it totally won), I was ready to give it a look & feel more to my liking. So I installed the e17-themes package from AUR, and started playing around with those.
Sadly, after a short while, I noticed that whenever I changed the theme, from "default" to anything else, the EFM windows would stop showing their contents. I mean: they are not frozen, I see no errors anywhere, everything is nice and smooth as always, but… EFM windows are empty.
I'm aware the same wiki article mentions a change in themes' format:
Note: During 2010 there was a change in how themes work, so older themes will not work unless they were updated. There used to be an edje_convert tool to do this, but that has been dropped long ago
But, if that tool is deprecated (and assuming that is the problem, a fact of which I'm not sure at all), how is such a conversion performed?
Any help on the issue will be appreciated. Best regards.
Last edited by bruno.unna (2013-05-05 20:23:53)

bruno.unna wrote:But, if that tool is deprecated (and assuming that is the problem, a fact of which I'm not sure at all), how is such a conversion performed?
It's not. Any themes that weren't converted are effectively dead. More than that, there was a change in theme API a month or two before before E17's release, so any theme that hasn't been updated in the last 6 months or so probably isn't going to work.

How to put a page break when a value changes

Hi there, I am very new to BI Publisher. I realize this is a really SIMPLE question, but I can't seem to find a CLEAR answer.
I have a set of data that I have a repeating group for in my RTF template and it works great. But I want to have a page break each time one of the values changes and I cannot figure out how.
here is the xml
<?xml version="1.0" encoding="UTF-8" ?>

<PIR05>
<LIST_G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>123</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>614</LINE_NO>
<COUNT_NO>614</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
- <G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>1232</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>615</LINE_NO>
<COUNT_NO>615</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>562354</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>WOR RECV</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>603</LINE_NO>
<COUNT_NO>603</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
</LIST_G_ITEM_NO>
<WHSE_DESC>OPM INVENTORY ORG</WHSE_DESC>
<CS_NODATA>617</CS_NODATA>
<CYCLE_NO>000000014</CYCLE_NO>
</PIR05>
I want the g_item_no (repeating group) to have a page break each time LOCATION changes.

You can declare two variables, to hold the previous and current LOCATION values and break the page when it differs.
Or just before your end-for-each, have this code.
<?if:position()!=1 and position()!=last() and LOCATION!=following::LOCATION[1]?><xsl:attribute name="break-before">page</xsl:attribute><?end if?>
Ensure that its placed in a form field.
This will have a page break when LOCATION changes.

WHEN-RADIO-CHANGED

Hi Everyone,
     I'm utilizing Oracle Forms 10g and i have created a radio group called "current_tier". Within the group there are 4 radio buttons. Each button is sequentially assigned a number from 0 to 3, so if you pick Tier 0, then the database field is populated with a Zero (0), and so on. This aspect works. Now, i created a WHEN-RADIO-CHANGED with the following code, and it just doesn't seem to do anything... no errors, nothing. Can you take a look and point me in the right direction? basically, if they pick Tier 2 or 3, I want a specific column in the database to be updated with a Date that they upgraded from say zero or 1 or even from 2 to 3. Below is my code.
declare
     v_current_tier number;
begin
     select current_tier into v_current_tier from TABLE where tracking_nbr = :global.track_nbr;
if v_current_tier <= 1 and :current_tier (name of radio group) <= 1 then
     update TABLE
     set date_modified = sysdate
     where tracking_nbr = :tracking_nbr;
if v_current_tier <= 1 and :current_tier >= 2 then
     update TABLE
     set date_upgraded_tier_2_3 = sysdate
     where tracking_nbr = :tracking_nbr;
end if;
end if;
end;
thank you,
Steven

declare
     v_current_tier number;
begin
     select current_tier into v_current_tier from TABLE where tracking_nbr = :global.track_nbr;
if v_current_tier <= 1 and :current_tier (name of radio group) <= 1 then
     update TABLE
     set date_modified = sysdate
     where tracking_nbr = :tracking_nbr;
else
     update TABLE
     set date_upgraded_tier_2_3 = sysdate
     where tracking_nbr = :tracking_nbr;
end if;
end;
OR
declare
     v_current_tier number;
begin
     select current_tier into v_current_tier from TABLE where tracking_nbr = :global.track_nbr;
if v_current_tier <= 1 and :current_tier (name of radio group) <= 1 then
     update TABLE
     set date_modified = sysdate
     where tracking_nbr = :tracking_nbr;
elsif v_current_tier <= 1 and :current_tier >= 2 then
     update TABLE
     set date_upgraded_tier_2_3 = sysdate
     where tracking_nbr = :tracking_nbr;
end if;
end;

Problem with WHEN-CHECKBOX-CHANGED and ON-POPULATE-DETAILS

I have a detail block with a relationship set up to a second block. In my first block, if I cause an error but the next action I take is to press a checkbox on another record, my error will display and the raise form trigger failure is triggered but the checkbox changes it's value and the cursor is displayed on the record with the error. I didn't want the checkbox to change if an error occurred. I tracked this through the trace and saw the on-populate-details is fired between the error and the when-checkbox-changed trigger. I went through debug and saw because of the erorr, the system will do a 'return' back to the sending action. I beleive this return is causing the when-checkbox-changed to fire. I'm just guessing here. I tried a similar action on another form without a relationship set up. That would eliminate the on-populate-details trigger. When I did a similar error, I got exactly what I was looking for. I caused the error but pressed the checkbox on another record. The error displayed but the checkbox did not change and the cursor returned to the error record. I need the record to have this relationship. Consequently, I need the on-populate-details trigger. Can anyone think of a solution? I'm currently on Forms 6I. We are going to forms 10G in the next few months. But I really need a solution on my current set up. Thanks.

The getNextDatabankRecord() call is at the beginning of my run code. I use one step just for this line code.
Code :
public void run() throws Exception {
          beginStep("CHARGEMENT DES DONNEES SUIVANTES");
               info("Chargement des prochaines données...");
               getDatabank("NouvellesIA").getNextDatabankRecord();
          endStep();
Stop the user after this step and goto the finish section should not be a problem...
If I use the "When out of records" option, does it jump directly to the finish section ?
Thanks,
Benoit.

When i changed my apple id password it send me back to trial on elements 12

i bought elements 12 in july 2014 and i had an issue with my password for my apple id and when i changed it set my photoshop back to trial version my wife deleted email with serial number but i do have the purchase email

Same issues here. I try and log into face time and cloud, it tells me my email is not veryfied. I go back through the link sent in the verification email and, low and behold, it tells me my address has already been veryfied.
Getting really annoyed now. I have tried using a different email to log in with, but not even getting the verify email in my inbox, even after it states it has sent one.
CMON APPLE!!! Please resolve this glitch.

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from A

I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from Adobe and Windows. I have a new pc with window 8.1.

It could be a coincidence, but I rebooted the machine and (knock on wood) PSE13 seems to be working ok.

I'm trying to make an android game and I want that when a collision with another object change of sc

I'm trying to make an android game and I want that when a collision with another object change of scene
how i can do this

here is the doc on htiTestObject for detecting collisions.
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/display/DisplayOb ject.html#hitTestObject()
for scene change use the second parameter in gotoandplay() to define scene name doc below
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/display/MovieClip .html#gotoAndPlay()

Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

Itunes 10.6.3 - Just update to the new Itunes and the album artwork is not sticking anymore... I upload the artwork and when I change songs and go back the art is gone. Anyone with similar issue ?

I have this issue. Album artwork was totally fine before. After this update, it is all messed up and even got messed up when transferred to my iphone.
iTunes doesn't have the artwork anymore, but then iPhone has it but shows wrong artwork with wrong albums.
Please fix!

Anyone know how to change the default font for the new pages? Apparently it does not even come up when I search the 'Help' section of Pages. The level of incompetence in this new version seems breathtaking

I cannot find how to change the default font in the new Pages. It does not appear in the Help area when I search for it. I am never sing Helvetica for my standard documents and cannot seem to change it. What am I missing? And why does Pages help not have an easy answer?
dan

You open a blank template and change the font to you liking. Remember to also get all the styles changed with new font. Then Save As Template. Now you have a template with the font you like.

In a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

in a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

Question already asked and answered several times.
It's a bug striking in long documents.
Select a word somewhere higher in the page then use the arrows to reach the wanted insertion point.
Yvan KOENIG (VALLAURIS, France) mardi 23 août 2011 15:44:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Break when element changes with in section.

Similar Messages

Maybe you are looking for