Bridge for words/articles

Hi,
I am really impressed with Bridge- it has become my itunes for photos, as well as making life quicker in cs4.
I work at university and am engaged in qualitative research. So far, there is no killer software out there for qualitative research. The best is Nvivo (http://www.qsrinternational.com/products_nvivo.aspx) which is not even available as native to Mac. Amongst other features, this product allows you to imports pdfs and tag them in a similar way to bridge.
How I see it, if you guys released a bridge for words instead of pictures, you would have this market in the bag. If you did it properly and combined similar features to Endnote (http://www.endnote.com/), Bridge would become the standard for all academics (if not all students) in the world.
...IN THE WORLD!
Not sure if this helps at all, but, considering how good Bridge is for pictures (and how much easier/better it has made working with photos), and how pdf is the prevailing format for academic papers, I would love it if you could jump the gap and bring the two together.
Thanks
Matt

This issue has been up here on the forums before, please check this thread:
http://talk.sonymobile.com/thread/101146
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

RoboHelp 7 for Word versus RoboHelp 7 HTML

RoboHelp 7 for Word versus RoboHelp 7 HTML
Can someone explain very simply when and why you use one but
not the other? I'm a little confused. We have RoboHelp 7 Server
installed and I think using RoboHelp 7 is the way to go, and I know
the server does allow to track usage, frequently viewed, etc. I
guess I just don't understand the purpose of RoboHelp 7 for Word -
what it is used for and it's capabilities when compared to HTML.
I have tons of pages of process documentation created from
Word. I need to make these available online thru RoboHelp, so am
just looking at different ways to distribute and explore all my
options. We're currently experiencing difficulties in publishing
RoboHelp HTML projects to the server.
Thanks!

Hi hughbetcha
If your output is going to be HTML based (and if you have
RoboHelp Server, it will be) then I would recommend RoboHelp HTML
hands down.
You might find the article linked below to be of value for
this:
Click
here and read
Cheers... Rick

Need Help using WRT54GL as Wireless Bridge for Xbox

Hi.
I need help configuring my WRT54GL as a wireless bridge for my xbox.
I have a Billion BiPAC 7404VGO currently in service as my main router/modem. i.e. I have my ADSL connection and PC connected to this. I also connect to this with a laptop.
I have an original xbox at the other end of the house (cat5 NOT an option).
Basically I want to connect my xbox to the rest of network. I have a WRT54GL I can use for this. I just dont know how to set it up.
The WRT54GL has Firmware Version: v4.30.7 (out of the box).
My Wireless network is using WPA.
I have a VPN setup through to work via the Billion.
The idea is to stream media from my PC to the xbox (media centre).
Any help would be HUGELY appreciated.
Thanks in advance.
Katman

A wireless router is a device which requires its own wired internet connection. A wireless router is not a wireless access point like the Linksys WAPs. A wireless router does not connect wireless to other wireless routers/APs with standard Linksys firmware. With Linksys firmware you need a WAP54G or similar. The WAPs support wireless bridging and repeater mode.
If you already have a WRT54GL then you have to install a 3rd party firmware which adds wireless bridging capabilities. Read the wikipedia article on "WRT54G" for information about which WRT models support 3rd party firmware and an overview of projects and links.
Remember, however, that you may brick your router if you install a 3rd party firmware incorrectly and you probably void the warranty if you install 3rd party firmware (it is even possible to find out after you restore the original Linksys firmware if you don't clear the NVRAM before).

How to get Client ID and Client Secret for Office App for Word which accessing SharePoint Online

we currently implementing an Office App for MS Word which access SharePoint list and get data from lists. Our aim is any user can get this app from Office App store and enter their SharePoint URL and browse their own SharePoint lists and use those. When
I was checking mechanisms which you used to access SharePoint, in some of them have used ClientId and Client Secret to authenticate with SharePoint. I have following questions.
1.If I want to sell my app using Office app store where can I get those clientId and client secret which is used to get the access tokens.
2.Is it possible to create SharePoint app and publish it to SharePoint app store and get clientId and client secret and use it when accessing through office. So users first download our SharePoint app install it to their SharePoint environment then get out
Office App from Office app store and add it to word. Will this work?

Hi,
>> We are planning to develop an Office app to access SharePoint Online and SharePoint on Premise from Microsoft word.
I’m not very familiar with SharePoint development, so please correct me if I have any misunderstandings about your requirement.
The basic components of an app for Office are an XML manifest file and the default webpage of your app (server side).
>> If I'm publishing my Office App for Word in to the Microsoft office app store, how do I get the ClientId and ClientSecret which I need to pass to authenticate with SharePoint online?
As far as I know, when register your web app to SharePoint Online, you will get the ClientId and ClientSecret from the Azure Active Directory. And you need to store the Client ID and Client
Secret on the app server side.
For details, you could reference the article
Building an Office 365 ASP.NET MVC app.
>> If ClientId and ClientSecret not providing when we publishing Word Office App to the app store how what the ways which we can use to authenticate with SharePoint using Word Office app?
You don’t need to provide the ClientId and ClientSecret when publishing your App to App Store. They are stored on your app server side.
By the way, if you have the question about how to access the SharePoint resource in a Web Application, I will suggest you posting the questions to
SharePoint Development Forum. For this forum, we mainly discuss the questions about using the Office JavaScript API to develop Apps for Office.
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Convert RoboHelp for Word project to RoboHTML

I have a couple projects which are created RoboHelp for Word
in RH6. The projects now need to be converted to RoboHelp HTML
projects and Flash generated outputs. In conjunction with this I
have the following questions:
1) Can RH Word projects be opened in RoboHTML? If so, what
are the pros and cons and how is the conversion done?
2) These independently projects will be linked/merged with a
master project which in RH HTML. Will this cause some inherent
problems.
3) I know I can generate a Flash based output from RoboHelp
for Word, however, how differently will (if at all) RH HTML treat
these files if called from within an RH HTML generated project.
4) I will also need to generate Printed documentation in the
end. Any impact on that?
Thank you in advance. A detailed answer would be greatly
appreciated.

All those questions and in detail too. This is a forum, not a
book shop. :-)
What we can do is give you some general guidance so that you
can experiment safely, then come back with specific questions.
You cannot open your RH for Word project in RH HTML. What you
have to do is import the underlying document(s) excluding the
footers as they contain RH for Word information that is not
relevant. Before you do anything, zip up the existing project and
keep it somewhere safe. Now you can use the project and blow it
apart without worrying. If anything goes wrong, you extract the zip
copy and start over.
There's a topic on my site about importing ordinary Word
documents (as opposed to RH for Word doc files) and that will be a
good starting point.
First get all the existing projects converted and running
properly as independent projects before you give any thought to
merging.
When you are ready, then look at the topic on merging webhelp
that is on my site. Just adapt as necessary for FlashHelp. I think
you need at least RH6 to merge FlashHelp, maybe 7. Not sure without
checking. RH6 FlashHelp has some indexing problems as you will see
in another thread.
RH generates files after which they go to development. What
do you mean by RH HTML treating those files? Do you mean will their
HTML be written differently? Almost certainly yes but why is that
an issue as long as they look how you want?
You will be able to generate printed documentation and that
is covered by yet another article on my site. Maybe now you are
getting the picture as to why nobody can provide the answer in
detail on a forum.
You have a massive task ahead of you and I think it would be
foolhardy to start with your real projects. Starting from where you
are, I would create some small RH for Word projects and then go
down the path you have to. With small projects like that, you will
be able to understand what is going on and the issues. It's the
same reason why most driving schools don't start you off in a
Ferrari!
Good luck. Glad its your problem. :-)

I am mac user and want to create Object in VBA macro. when i write "set objwrd=createObject("Word.Application")"- it returns "runtime error "492" can't create object". now what it alternative to create object for word in excel macro???

I am mac user and want to create Object in VBA macro. when i write "set objwrd=createObject("Word.Application")"… it returns "runtime error "492" can't create object". now what it alternative to create object for word in excel macro???

Any help here...
http://support.microsoft.com/kb/288117
http://www.macworld.com/article/1154785/welcomebackvisualbasic.html

Apache-WebLogic bridge for Solaris 8

Is there an Apache bridge for Solaris 8 running on an x86 platofrm yet? Obviously, the one for SPARC systems doesn't work...

After looking everywhere for the reason why it wasn't working, I found this forum.
I built my own and it worked like a charm!!
Thanks!
Shawn.
"Eric Gross" <[email protected]> wrote:
Yes.. I've seen this.
Unfortunately, we do not ship separate modules. It is unfortunate that
Redhat has chosen 2.0.40 as their base version and to backport fixes
into
that base version. The reason this is unfortunate is that the rest of
the
world is using at least 2.0.42.
Is there any chance you can build your own version ?
Thanks,
Eric
"Victoria A Smith" <[email protected]> wrote in message
news:3f296a76$[email protected]..
The problem with that is that the vendor supported,
secure version of Apache (for RedHat) is 2.0.40.
To understand why this is important, read this
short article:
http://www.redhat.com/advice/speaks_backport.html
Victoria
"Eric Gross" <[email protected]> wrote:
Yes, you need to be using at least Apache 2.0.42.
Eric
"Rahul Phadnis" <[email protected]> wrote in message
news:3f1c895d$[email protected]..
I am trying to configure the plugin to work for apache 2.0.40. Theapache
server
has been installed on RedHat linux 7.3..
i copied the mod_wl_20.so from linux/i686/ directory of weblogicinstallation.[...]

Detailed Software Repair Instructions using Pc Companion(Win)or Bridge for MAC. (Update 8/5/2014)

We have an extended guide that should help you repair the system of your phone. This instructions are valid for all Android based units and for some legacy Sony Ericsson models(The list of phones that can be used with the application is displayed in Step 9 of the process). please follow the instructions carefully: Turn the phone off and disconnect it from the computer. 1. Visit this link:http://www.sonymobile.com/us/tools/pc-companion/Click on Download PC companion2.Run the software After the installation the first screen will show you the PC Companion Startup Guide which gives you a brief explanation on the main modules of PC companion (Support Zone, Xperia Transfer, Contact setup and Media Go) Keep clicking next.3.Now you will see the screen with the different modules.Select Support Zone> Click Start. The program will download the module. Then click on start on Phone/Tablet Software update. (Here you can choose to update an accessory, go to step 14 for instructions) Note: At this point if you get an error stating that "unable to install update components" or "server is busy" Please proceed to step 13 . If you not see that error then continue with step 4.
4. The program will show a window saying "could not find phone/Tablet” Do not Connect phone instead select Repair my phone/tablet. This will bring you to a window with a warning that says "data will be lost" (do you want to continue) Select to continue (Data in the phone will be deleted, only data in the SD card will remain. Make sure you have done all proper backups if possible)6. The program will issue a second warning stating that “data saved in the phone /tablet will be overwritten during the update of your phone”. Click on the checkmark box next to the acceptance text and select Next to continue.7. Next the computer will download the necessary files (Prepare stage, this can take several minutes depending on the speed of your connection) and then its done it will show you a list of recommendations for a successful update operation. When you are done reading this section click on the checkmark box and press Continue8. Next you will get a Battery level warning that states that your phone should have at least 80% battery. (If the issue in the phone does not permit the unit from turning on, then charge it connected to the wall charger for at least 2 hours and then comeback to this step) Then click on the checkmark and select Next9. Choose the Phone from the list then click on "next" then you will see a new section telling you how to connect the phone. (don't connect it yet) Again, at this point the phone must be off and disconnected from the PC. 10.. Connect the cable to the PC not to the phone, then while pressing and holding the indicated button (in the steps on screen an specific button will be shown for you to press on the phone) connect the cable to the phone and keep holding the indicated button until the program says "the update of your phone has started..." (in some cases a message of "Installing drivers" will appear before the message of "the update of your phone has started..." is shown.) 11. If you failed to follow the steps correctly the phone will turn on. If this happens disconnect the phone from the cable, turn it off and repeat from step 10). 12. If the phone is connected properly, PC Companion will proceed with the update ( It will tell you to let go of the key) then wait for the update to finish and follow instructions on screen to disconnect the unit. End of process. ----------------------------------------------------------------------If the software fails to install:13. If "unable to install update components" 1. Close Pc companion 2. Install Java from: http://www.java.com 3. start Pc companion again and try to do the software unlock process once more. 14.Select Accessories software update. Click on start and the computer will download the necessary files (Prepare Stage) it will take several minutes. Then follow the instructions from step 8. Note: Some computers may block the installation of the update service, if this happens use this:http://www.sonymobile.com/us/tools/update-service/ this is the Standalone update software. (Not globally available)If the Phone is unresponsive (Then do this extra step and when done proceed to redo the repair process:Press and hold the power button and the volume up button at the same time for 10 to 15 seconds. This will reset the unit)Note: This procedure does not work for the Xperia Play R800x (Verizon and other Non SIM card variants of the Xperia play that lack MTP support. It does work for the R800a At&t's model)Bridge For Mac instructions on my post below. Valid for all Android based units and most java Sony Ericsson units.

Here are the basic Steps for Bridge for MAC.Download Bridge for MAC from:http://www.sonymobile.com/gb/tools/bridge-for-mac/The phone should not be connected to the MAC.
The phone should be off.After the Download unzip the file and drag the bridge for MAC icon to the Applications folder. (install then use finder to locate icon)In the Main "No phone connected" window, on the top menu (top application menu) Select "Phone" and scroll down to "Repair phone"
This will open the Phone Software Restore window with the 3 sections for Start, Prepare and Update.
Click on continue bellow. Doing so will popup a window warning you about the loss of your personal info. Click on the checkmark signaling that you understand the data loss situation,
This will take you to the Connection Procedure Screen. Follow the instructions in the screen and click on continue*.
*One key aspect of the last step to keep holding the indicated button before and after you connect the phone to the MAC until the update starts. IF this is not done correctly then the phone won't connect to the MAC

Help for using camera raw in PSE 8/Bridge for Mac for the Canon 7D

Recently purchasing the Canon 7D, taking a few test photos in Raw, then trying to use Camera Raw in PSE8/Bridge for Mac is a problem. I cannot figure it out. Can anyone help this frustrated, novice computer user?

You need to update the camera raw plug-in for bridge and PSE 8 separately (they use two different copies). In Bridge, just go to Help>Updates which will install, I think, ACR 5.7, which works with your camera. (You can't update bridge beyond that version).
For PSE 8, go here, download the latest version and follow the instructions in the readme file.
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh
Note that the directions may tell you that you can overwrite the old plug-in. That isn't true--you must remove it before putting the new one in there.

How to use "Mail Merge for Word" to include only Account fields?

We're attempting to use the Mail Merge for Word template to create a document containing several fields from the Account object. We do not need any fields from the Contact object, and there are many contacts linked to each account.
When choosing "Get On Demand Data > Accounts", removing all the [Contacts] fields, selecting the necessary [Accounts] fields, then clicking "OK", a "List Download in Progress" window appears, followed by one that says "Microsoft Word - Subscript out of range". None of the [Accounts] fields are available in the downloaded data.
Can anyone tell me how to include the appropriate Account fields without any Contact fields (which pulls a separate Merge record for every Contact linked with the selected Account)?
Thanks.

Thanks for trying to help with this.
So far, we've been unable to pull even a SINGLE account record. So the problem is not related to data volume limitations. The tool seems to require that Contacts are selected, but for this application we only want a single merge document per Account.
If anyone else has had success using the Mail Merge for Word tool to pull only Account data, please give us your guidance. Thanks.

Setting up Bridge for multiple users on a network

New Bridge user here
Can anyone give me some advice on how to set up Bridge for use by multiple users over a network / server?
We have a large image bank stored on a server and ideally if any one user adds keywords or other metadata to an image I would like the rest of the users to be able to view that data and be able to use it in searches. AS more than one user could add keywords at any time I was wondering is it possible to set up a central keyword file or cache so any updates are available to all users.
Do I set up a shared cache? What happens if it becomes corrupted and has to be rebuilt, do the keywords disappear as well?
Are the keywords associated with that particular cache or are they stored in a separate file?
Thanks,
Hazel

Curt
how do you know if your using the
Central cache all distributed cache ?
and are they both stored in the same place ?

What is new in RoboHelp 8 for Word ?

Did Adobe make any fixes or add any new stuff to the RH for Word with the version 8?
The only features they describe where RH for Word is mentioned on the Feature page was how to NOT install it by default.
Any one using this that used past versions see differences?

Hi there
Colum is a teensy bit misleading in his reply. Certainly he is spot on with most of it, but the bit about WinHelp not being supported out of the box on Vista is technically incorrect.
What is technically correct is that 32 bit WinHelp is not directly supported. The first time you attempt to run a 32 bit WinHelp file you are prompted to download the 32 bit WinHelp display engine. But support out of the box is there for 16 bit WinHelp with no download needed.
princess betty wrote:
I do generate a chm file for my own local use only because of the search highlight feature (this feature is not available in WebHelp output without using ctrl+f on each page)...
What version are you using? Search highlighting in WebHelp was introduced in version 7.
princess betty wrote:
...It is also easy to use because the Word knowledge lowers the learning curve. To abandon it would be sad....
The interface for RoboHelp HTML is easier to use than Word. The biggest hurdle many face is the loss of Tab Stops. You really would do yourself a favor if you tried RoboHelp HTML. It too is a very nice (and mature) product.
princess betty wrote:
I do use RoboHtml for some smaller help systems, but those are mostly help systems that contain less than 50 pages. To maintain my afore mentioned WebHelp system using RoboHtml would, unfortunately, very much decrease my productivity....
I'd say it depends greatly on how you structured your content. I never noticed that I had any sort of productivity loss as a result of switching. Sure, you have multiple documents with many topics in each document. In the RoboHelp HTML world each topic is an HTML page. But you knew that already. What I'm guessing may be news for you is that you may organize HTML pages into folders.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How to add a Captivate 5 Project into RH for Word?

I have to add a captivate simulation project into my Help project, and was wondering if anyone knows if it is possible. I searched Captivate's help, and they say you can with RH HTML, but I am currently using:
1. RH for Word Build 8.0.0.203
2. Captivate 5.0.0.596
The Help project is a Single Source Layout with WinHelp 2000 primary layout. Any ideas?
eangel

Hi Rick,
I did test the url from my browser's address bar, and it worked fine. I cannot get this to work from the help project.
Hope someone can help.
Thanks,
eangel

How to open a zip-file in Bridge for PC?

How to open a zip-file in Bridge for PC?

I think it's built in, just double click on it and it should open with Archive Utility. I dunno, maybe Unrar X might work for you>
JB

How can I edit an Automator action for Word?

I'm running Word 2008 on a Macbook Pro, Mac OS 10.5.
Word comes with a selection of Automator actions, including one to find and replace text in Word. I often want to convert standard numerals to old-style numerals, which are part of the extended glyphs set in fonts I use. Automator will allow me to set up ten find/replace actions (for the numbers 0-9) that successfully replace all the numerals with old-style numerals. But it only does it for the main body of the document, not for the footnotes. I need to be able to do it for all the footnotes.
I thought I might find a workaround by adding an AppleScript to my workflow, which would shift the focus in Word to the footnotes and rerun the find/replace actions. I mapped the menu item View/Footnotes to the keystroke command-) and inserted this AppleScript into the Automator workflow:
tell application "Microsoft Word"
tell application "Microsoft Word" to activate
tell application "System Events"
tell process "Microsoft Word"
keystroke ")" using command down
end tell
end tell
end tell
But the find/replace actions simply repeat what they'd done before, converting the numerals in the main body but not in the footnotes. I then thought that perhaps I should have an AppleScript to do the find/replace itself, once the footnotes have been selected, so I created the following (command-H accesses the find/replace dialog box in Word 2008):
tell application "Microsoft Word"
tell application "Microsoft Word" to activate
tell application "System Events"
tell process "Microsoft Word"
keystroke "H" using command down
keystroke "1"
keystroke tab
keystroke ""
end tell
end tell
end tell
The character after the fourth keystroke command is the glyph for old-style numeral 1. For some reason Word reinterprets this as the letter a. So using AppleScript I can only replace the numerals 1-9 with the letters a-i.
I'm pretty hopeless at even this very basic level of programming, but I presume that there's something in the Automator action 'Find and replace in Word' that specifically tells it not to look anywhere but the footnotes. I also presume it's possible to insert a command to tell it to operate on the footnotes (and headers and footers: everywhere!) too.
Does anyone know a way to edit an Automator action? I'm willing to experiment and fiddle with one until I find a way that works, if nobody knows the exact changes that I'd need to make, but I just don't know how to edit an Automator action in the first place. A bit of googling suggests that I could do it in XCode, and that that is bundled with my Mac, but I don't have it.
This all used to work when Office used to allow VBA (and I was using a horrible Windoze machine). Maybe someone would prefer just to find a way of creating a solution our of the old code, so here's one part of what I used (to change the number 1):
For Each aStory In ActiveDocument.StoryRanges
With aStory.Find
.ClearFormatting
With .Replacement
.ClearFormatting
End With
.Execute FindText:="1", ReplaceWith:=ChrW(63281), _
Format:=True, MatchCase:=True, Replace:=wdReplaceAll
End With
Next aStory
Thanks in advance for any help.

Thanks to all three contributors for their generous help so far. Mac people are lovely.
BDAqua's suggestion wouldn't work, I think, because copying footnote text into another application and then back into Word would lose all the associations between footnote references in the body and the footnotes themselves. I wish I could do what Klaus1 says, but Word 2008 won't allow the creation of Macros any more. They've shut off support for their creation. Nice MS. red_menace's suggestion seems very plausible and I'll look into a way of mapping the old style numerals to specific keystrokes. That might do it.
Reflecting on what you all said, I looked again through Word's help menus and eventually got pointed towards this page of 'help': <http://tinyurl.com/6398l6>. This is completely impenetrable for me, though it does compare a VBA script for Word 2004 to an AppleScript. This encourages me to hope that it should be possible to translate my original VBA script (part of which I included in my first message) into AppleScript, though I don't know how to do it because I don't really understand the language in the first place (the VBA script was put together by someone else).

Bridge for words/articles

Similar Messages

Maybe you are looking for