Browser plug-in won't allow for saves after a few seconds

I am using the Adobe pdf reader plugin with Chrome browser. I have noticed that when I view a pdf within Chrome, the pdf will load, but the only chance I have to save a pdf from that tab that opens up is when there is a small toolbar that appears at the bottom, allowing me to save (or print, IIRC). But this toolbar dissappears after a few seconds, and the right-click menu doesn't allow me to save. Is there a way to get this small toolbar to appear for a longer period of time? Sometimes I like to see the pdf for a bit, before deciding to print or not.

Certain settings, e.g. printer sharing, can prevent sleep. There are other possibilities as well. See this kbase article:
http://support.apple.com/kb/HT1776

Similar Messages

  • MacBook Pro won't sleep for more than a few seconds

    For a few months now my late '08 MBP has been intermittently refusing to sleep. When I close the lid, the system will power down to sleep mode, the Apple on the top goes out and the power light will fade off and on as expected. But after a few seconds, the cd drive whirrs and the system powers up again and I have to choose Apple Menu > Sleep, because closing the lid doesn't work.
    It's an intermittent issue: sometimes it'll sleep first time, other times it needs to be told to sleep from the Apple menu three or four times to persuade it to get some rest.
    I've tried the usual suspects: Turning off Bluetooth, PRAM, SMC...anyone else have this problem?

    Certain settings, e.g. printer sharing, can prevent sleep. There are other possibilities as well. See this kbase article:
    http://support.apple.com/kb/HT1776

  • Macbook Pro Airport won't connect for more than a few seconds on battery

    My Macbook Pro will not stay connected to my work Wifi lan running on cisco AP1213G. It connects for a few seconds then drops the connecion whenever it's on battery power. On mains power it connects after saying there was an error but will occasionally not pass any trafic
    SSID is hidden, network uses WPA.
    AirPort Card Information:
    Wireless Card Type: AirPort Extreme (0x168C, 0x86)
    Wireless Card Locale: Worldwide
    Wireless Card Firmware Version: 0.1.24
    Current Wireless Network: lonschap01-lan
    Wireless Channel: 5
    Any ideas?
    Rob
    Macbook Pro   Mac OS X (10.4.7)   2Gb Ram, 100Mb HD 2Gz Core Duo.

    Certain settings, e.g. printer sharing, can prevent sleep. There are other possibilities as well. See this kbase article:
    http://support.apple.com/kb/HT1776

  • I've set up an event and published it, but it won't allow for registrations.  The SUBMIT button is grayed out.  Thoughts?

    I've set up an event and published it, but it won't allow for registrations.  The SUBMIT button is grayed out.  Thoughts?

    The submit button is greyed out in case the registration page is being viewed in preview mode.
    Please check if the following string is present in the event registration URL:
    "preview=true"
    If it is present, please try by removing this string.
    Thanks,
    -Nitin

  • I am trying to backup my Itunes onto my external hard drive. I am at the step where I on Itunes, click on File - Library - Organize library. I am suppose to check mark both boxes there, It won't allow me to check mark the second box, why? How to fix this.

    I am trying to backup my Itunes onto my external hard drive. I am at the step where I on Itunes, click on File ->Library ->Organize library. I am suppose to check mark both boxes there, the first being "Consolidate Files" & the second being "Reorganize files in the folder 'Itunes Media'. I am able to checkmark the first box but It won't allow me to check mark the second box, why? How can i fix this? Please help!

    Well you must have made a mistake somewhere. The last instruction of step four reads:
    When you've found your iTunes library folder, drag that folder to your external hard drive. This will begin the iTunes backup. The amount of time the backup will take depends on the size of your library. When the transfer is done, your backup is complete and your external hard drive can be disconnected.
    Normally dragging content from to a new location on a different drive will result in a copy action which is what you were supposed to do. At a guess you somehow managed to move the iTunes folder. Then when you started iTunes it created a new blank library for you assuming it had just been installed rather that raising a warning.
    Close iTunes. Rename the iTunes folder on the internal drive as iTunes (Empty) then copy the iTunes folder from the external back into the User's Music folder. Start iTunes. All should be well.
    When you've made sure it all works please read my User Tip and use that method to backup in future. Since you already have a folder with the backup in place you can skip the "Make New" operation in the fourth step and simply choose the external folder.
    tt2

  • Won't Charge! Plugged in but goes to Battery Only icon after a few seconds!

    Ok, I'm at my wit's end. I have very little battery left, and no other phone or access to internet most of the time.
    I plug in my phone. No change in icon, no sound.
    Sometimes I plug it in, it goes to "charging", but then immediately goes back. Sometimes this will happen over and over, every few seconds.
    Sometimes it happens, and since there's no sound when that happens, I don't notice for hours.
    Sometimes I plug it in, and it goes to "charging", then to "plugged in" (when it's the plug icon it's not charging, even when there's almost no battery left), then to battery.
    It won't charge for more than 1.5 seconds at a time, no matter what I do.
    I've tried wiggling the plug in the phone. I've plugged it into my computer, my work computer, outlet at home, outlet at work, outlet at coffee shop. Same thing.
    Is this a software problem? A hardware problem? I can't get to the Apple Store for at least a few days, and I can't be without any kind of phone!
    Please help!

    P.S. when it plugs into the computer, it doesn't always Sync- it thinks it's unplugged too fast for itunes to recognize it.
    The phone also crashes ALL the time (even with the application for the phone settings- I have only basic apps). My itunes crashes a lot too, but I've re-installed and all that- I think the phone is crashing it.

  • Macos file upload file browse has started suddenly to close after a few seconds before allowing me to choose a file

    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.9) Gecko/20100824 Firefox/3.6.9
    A couple of days ago after the latest update every time I try and upload a file to a web site the file browse has started suddenly to close after a few seconds before allowing me to choose a file.

    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.9) Gecko/20100824 Firefox/3.6.9
    A couple of days ago after the latest update every time I try and upload a file to a web site the file browse has started suddenly to close after a few seconds before allowing me to choose a file.

  • My iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help

    my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help

    Hello warhogs17,
    After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • When using adobe flash player, for example, in the game. Screen will fade after a few seconds of inactivity.

    Hi, i have windows 7 hp, sp1. When using adobe flash player, for example, in the game. Screen will fade after a few seconds of inactivity. But the pixels on are highlighted. This is accomplished by installing the latest update flash.If I move the mouse the screen returns. Screen goes from one second to several, and sometimes not at all. Pleas help me

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/thread/1195540

  • Firefox installation made my power saver function misfire - the system goes down after a few minutes of inactivity but then comes right back on again after a few seconds.

    My power management scheme: turn off monitor after 2 min of inactivity; turn off hard discs after 5 min of inactivity. doesn't work reliably anymore. Usually, with Firefox installed, the system powers down after the preset times but then comes right back on again after a few seconds. If I restart the machine, my selected power management scheme works properly for a few cycles but then reverts to the mode of turning back on after a few seconds after having shut down.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
    <br />
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • Help, I let my battery go down completely, when I try to charge it the red battery flashing sign appears and then flicks off after a few seconds. I have tried a number of chargers and a docking station nothing works. Why won't it charge?

    Help, I let my battery go down completely, when I try to charge it the red battery flashing sign appears and then flicks off after a few seconds. I have tried a number of chargers and a docking station nothing works. Why won't it charge?

    hi I have the same problem... tried many different docking ports and cords also switched from outlet to outlet..... left on on outlet for 7 hours and still nothing.. what should i do?

  • HT1386 As soon as I plug my iphone4 (running 4.3.3) into my pc, it appears in the left hand column and the little wheel starts turning. Then it stops after a few seconds and itunes freezes. I have tried everything. Can anyone help. Thanks

    As soon as I plug my iphone4 (running 4.3.3) into my pc, it appears in the left hand column and the little wheel starts turning. Then it stops after a few seconds and itunes freezes. I have tried everything. Can anyone help. Thanks

    Hi Patrick,
    Yes, a very frusterating issue indeed. Someone else had mentioned a possible issue with real player, I tried getting rid of that and same issues. I even got completely rid of firefox for the moment. Guess what, problem still is persisting. I think this means it maybe something else altogether. I will go back to re-add firefox after I get this straightened out but now using Chrome for the moment.
    What I've also found out is that the sound can be restarted when I unplug and replug in the 3.5mm speaker cable from the audio output jack on the back of the computer. Any ideas?
    Thanks!

  • When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works!  Any suggestions?

    When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works!  I have thought about deleting the app from my phone and then reloading it again but I worry that it will delete all my calendar info???  Any suggestions?

    To reset, press and hold the Home and power buttons until the silver apple appears.
    I would delete the app, reset the phone and then download the app again. Your calendar information should be stored on the phone as Week Cal uses the Calendar app information.
    Best of luck.

  • When starting the Migration Assistant on my pc, after a few seconds it says "An error occurred while preparating your information for transfer" what should i do ?

    When starting the Migration Assistant on my pc, after a few seconds it says "An error occurred while preparating your information for transfer" what should i do ?

    Restart both computers then try again.
    Switch Basics: Migrate your Windows files to your Mac

  • HT201177 My new Mac Mini is plugged directly into my tv via hdmi cable and the screen will abruptly go blank and then return after a few seconds. Why is this happening?

    So I recently got a Mac Mini about two weeks ago and for some reason while I am on it the display will go blank and then return after a few seconds. It is happening very frequently. I checked the HDMI cable, I checked my tv and nothing seems to be wrong with them and I don't know what is going on.
    I am getting a bit frustrated because this Mac is brand spanking new and it is totally acting up for no reason whatsoever.
    Could someone please help me with this? I don't want my new computer to be useless. I need it.

    Which TV model do you have?
    Be aware of the fact that very many TVs do expect video signals on their HDMI inputs, not data signals from Macs or PCs. Please consult your TV manual if PCs or Macs can definitely be connected via HDMI, or if e.g. only DVI or RGB/VGA connectors are to be used.
    In case of DVI inputs for data being present, it's not a problem if an HDMI->DVI adapter, or better, cable is being used.
    Many users here are overlooking this potential reason for problems, assuming that HDMI outputs must always communicate with any HDMI input, certainly also because TV manufacturers do not "advertise" such limitations loudly.
    AV receivers with multiple HDMI inputs and a single HDMI video output to the TV are typically more "tolerant" and provide a sort of "converter" function. If present, feed a Mac's HDMI signal into the receiver, not the TV directly. If the receiver does not have enough HDMI inputs, consider to connect rather a video source (DVD player or similar) directly to the TV than the the Mac.

Maybe you are looking for