BSP call new URL page blank
Hi,i call from my bsp application a new url with:
navigation->USE_AUTO_SUBMIT_FORM( TARGET_FRAME = '_blank' ).
navigation->CALL_APPLICATION( url = url_role ).
call the new url ok, but my page turn in blank, i want to see my page, when i call the new url, how i do that?
thanks
Angel G.
Hi,
why do you need two statements? I thought the following statement should be enough..
navigation->goto_page( url = 'http://www.sap.com' ).
Regards,
Suresh Datti
P.S. PL post BSP questions in the BSP forum for a better response
Similar Messages
-
Open new URL page in same window
Hi all,
I am using LinkToUrl UI element for opening a new URL
page.
I did it successfully by giving the URL in reference property.
But the link is opening in new window.It should be opened
in same window instead of new window.
Any one can help me........Hi
Use the target property of LinktoURL .
You can specify the window name where you want to load new URL.
Check the following Link.
[Link|http://help.sap.com/saphelp_erp2005/helpdata/en/25/e2f0416ab6da6fe10000000a1550b0/content.htm]
Regards
Naresh -
How to call the url page inside the procedure.
Hi,
I am not exposure in plsql.
I am getting some problem in utl_http link.
I create a one procedure. The procedure was successfully compiled. But the url page doesnt open..
I attached the procedure,
create or replace procedure p(mob number)
IS
l_page long;
l_url varchar2(25000 char) ;
begin
null;
l_page := utl_http.request( 'http://www.yahoo.com');
end;
please tell me the solution for this problem..
I am waiting for ur response.
Thanks,
Sasi.this is a duplicate thread:
how to open the web page in pl/sql
the OP doesn't seem to understand the difference between a web browser and a programming language....... I can't say I've ever had to explain the difference before...
let's just say.... butterflies are not in any way similar to electric shavers.. -
I updated to iOS 7 & now I cannot bring up new URL page. How do I fix this?
I updated to iOS 7 & now I cannot bring up a new Web page. How do I fix this?
Hello there, Natursula.
The iPad User's Manual for iOS 7 covers your question on page 45. Use the following link to view it:
manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
If you'd like to add the user's guide to your iBooks Application you can use the following link for your iPad:
iTunes - Books - iPad User Guide For iOS 7 by Apple Inc.
https://itunes.apple.com/us/book/ipad-user-guide-for-ios-7/id709634245?mt=11
Here is a screenshot of the section on Page 45 that shows you how:
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
It would be nice to have the possibility to attach a print screen or something to give you a better idea what is happening and how it looks like.
Anyway, what I described above is accurate:
- the address bar shows the link where I wish to go
- but the page loaded is blank with these 2 hyperlink messages ("Advertise here" in the top left corner, and "Skip this ad" in the top right corner).
I would like to emphasize that it does not have to do with the requested URL: it does the same thing with all sites, all the time.For me is the same, it's yet 6 months.
the blank page apears for the first 20-30 of the day's navigation, then no more.
For example: If I open firefox at 9 a.m., it appears until 9.30 more or less. If i surf the web until mignight, at 00.01 a.m. this page starts bugging me.
I have yust to click on the link "skip this ad" to return to the desired web page.
Using Adblockplus and NoScript plug-ins had sadly no effect.
I've read somewere that the ploblem should be an f**** adware called "directCPV"., and that the solution is toremove an .exe file called Directcpv.exe or somewhat else, but in my pc I haven't found any of those linked to this adware.
I tried a full system scan with an antivirus (McAfee), with Malwarebytes, Ad-Aware, ATF cleaner, Spybot, Exterminate-it but NO RESULTS.
I tried to do this in safe mode too.
No way cleaning the cache, temp files, cookies etc.
finally I tried to uninstall Firefox (cleaning all registry entry too) and reinstall it, but the problem is still there.
The only cure seems to be formatting the HD, but it's very last chance.
If someone have an idea, please post it here. -
Oracle Reports Parameter List form called through URL bring blank page
We are using 10g Release 2
We are able to load balance all other reports out there.
1. Using run_report_objects in oracle forms
2. Using a URL to call a report directly with parameters.
However we are unable to use the URL function if there there is a hard ware load balancer in front. For the following scenario
1. Using a URL to call an oracle report using its own internal parameters form. This is with the parameter "paraform=yes"
Message was edited by:
naveeny1974I just found out that IE 6 and IE 7 do not work. However, Firefox does work.
-
Portal form custom button to call new portal page
Portal 3.0.9
I can create a portal form componment which sets session variables appropriately based on a custom button. I can get a 2nd component such as a report to read this session variable ok as long as it on the SAME portal page.
However, how do I get the form (exposed as a portlet on a page) to call A DIFFERENT Portal page which contains a number of application components reading the previously set session variable? I do not want to call the module directly as it will appear in a popup window.
I've tried using owa_util.redirect_url('page url'); but this gets ignored and the same page is refreshed.
Any ideas?
JohnHi,
You can call the new page in the success procedure of the form
example
declare
l_url varchar2(2000);
begin
l_url := 'cut and paste the page link from the navigator';
go(l_url);
end;
Thanks,
Sharmila -
Hi @ all,
I try to call another WD4A-Application with:
lr_window = lr_window_manager->create_external_window( url = lv_url ).
The system create a new browser window, but I want to start it in the same browser window (or close the parent window).
Have somebody an idea to solve this?
thanks
Jürgen>can you clarifiy please how it comes to the general statement
I don't have any details I can share. If development makes such a statement, they must have encountered some incompatibilites that cause they not to support this technology within the Portal.
Here is some additional detail from the 7.02 online help:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/43/6b972329d23d33e10000000a11466f/frameset.htm
For every interface view, you can flag exactly one inbound plug as a resume plug. When navigating in the portal, the existence of a resume plug results in the following behavior: If the Portal Navigation recognizes such a plug in the running application, the latter is not exited when navigating away but is instead transferred to a suspend mode. The session ID and contents of the context are retained and a new application is started. If a user then goes back to the original application via the navigation menu of the portal, it can be processed in exactly the same state in which it was left. Note the following:
If an application features a resume plug, the corresponding session is retained when navigating away in the portal. However, in many cases it may be sensible or even absolutely necessary to close the application completely. In such cases, you must not implement a resume plug for the interface view.
While your applications are running within a portal, the portal navigation takes care of the suspend step without you having to implement it at design time. The mere existence of a resume plug ensures that an application is only interrupted and not exited in the case of a portal navigation. However, this does not take place if the application is not running in the portal and can thus not make use of the portal navigation mechanism.
If an outbound plug is flagged as a suspend flag in a Web Dynpro ABAP application, this can lead to errors when the application is executed in the portal. If you are not completely sure that your application is executed solely outside a portal, you should avoid the use of suspend plugs. -
I have a swf as the masthead of my site that includes the
site navigation. I want the swf to go to a specific and unique
frame label on loading each page when a visitor clicks a button.
Basically, I want the masthead to look different for each page.So basically you have an HTML page with a flash at the top,
right?
One way to do this is with a page variable send thru the URL.
For ex you may have 5 pages so page 1 is index=1 and page 2 is
index = 2 and so on. Then you will need your flash to read this
index and go to the specific frame onload. This is the way I do it.
It not very hard to do if you are familiar with flash.
But I guess this question would probably be better answered
in the flash discussion if you need more help with.
Frenchy ASP -
How to open NEW PORTAL PAGE from current portal page ?
I'm very confuse with my problem.
I have 2 portal page.
portal page I has 2 portlet : portlet A & portlet C.
portal page II has 2 portlet : portlet B & portlet C.
Now my customer want : start with portal page I, when i submit portlet A, program will open portal page II.
I don't know the way to call new portal page from current portal page. Help me, please.
Thanks.
Edited by: young_hero on Oct 30, 2008 1:12 AMCould you please help me how to call a .html page
from a Pl/Sql procedure or trigger ?
Thanks & Regards
Kalyani KothaKalyani,
Could you explain a little more exactly what you're trying to acheive? I'm not quite sure what it is you're asking for. Are you asking: "how would you/can you open a browser and direct it to a URL with PL/SQL?"
Earl -
How to create a new creation page from view page itself
Dear all
i have view page in that i need to click on new button i need to call new creation page
here i am writing the code in view page co in pfr
HashMap h1 = new HashMap();
h1.put("pmode", "Continue");
if (pageContext.getParameter("New") != null)
pageContext.setForceForwardURL("OA.jsp?page=/crm/oracle/apps/xxcrm/crmmgmt/quotationmgmt/webui/xxcrmquotationcreationPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null, h1, false, OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
in creation co i am calling this method
if (pmode!=null)
System.out.println("Entered into this block.....");
am.xxcreatequotation(orgid);//blank record for this
System.out.println("After this statement......");
cancel1.setRendered(false);
System.out.println("After this statement......11");
in view page when i am clicking the new button the page is calling editable mode
i dont think so y it is happening like this.
Regards
SreekanthDear Gaurav
i wrote this code
public void xxcreatequotation(int orgid)
xxcrmOpportunityTVOImpl vo = getxxcrmOpportunityTVO();
OADBTransaction tr = getOADBTransaction();
int x = 0;
String lv_current_flag = "Y";
String lv_opt_flag = "N";
if (vo.getFetchedRowCount() == 0)
vo.setMaxFetchSize(0);
Row createqtn = vo.createRow();
vo.insertRow(createqtn);
createqtn.setNewRowState(Row.STATUS_INITIALIZED);
Number qtnid = tr.getSequenceValue("xxcrm_opportunity_seq");
System.out.println("The opportunity id is....." + qtnid);
vo.getCurrentRow().setAttribute("OppoOpportunityid", qtnid);
vo.getCurrentRow().setAttribute("OrgId", orgid);
vo.getCurrentRow().setAttribute("OppoRevisionId", x);
vo.getCurrentRow().setAttribute("OppoCurrentFlag", lv_current_flag);
vo.getCurrentRow().setAttribute("OppoIsoptional", lv_opt_flag);
vo.getCurrentRow().setAttribute("OppoBaseOpportunityid", qtnid);
Regards
Sreekanth -
I am displayed a button using web dynpro abap,
if i click the button means a new url page should be
opened in the same window.
I did the application but when i click the button means
a new window is opened.It should not be happened.
Anyone can plz send me the correct coding immediately....>
cranjith kumar wrote:
> I am displayed a button using web dynpro abap,
> if i click the button means a new url page should be
> opened in the same window.
>
> I did the application but when i click the button means
> a new window is opened.It should not be happened.
>
> Anyone can plz send me the correct coding immediately....
First of all how is anyone supposed to help you correct your coding when you have posted any. We can't possibly know what is going on inside the event handler for your button. I suggest that post some of your coding here. In general if you want to open another URL in the same page without using the linkToURL UI element, you should consider the usage of Exit Plugs:
[http://help.sap.com/saphelp_nw70/helpdata/EN/45/1bc575ba064574e10000000a114a6b/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/EN/45/1bc575ba064574e10000000a114a6b/frameset.htm]
Second, please don't ask people to do something "immediately". Everything done in the forum is on a volunteer basis and people help out as fast as possible. Your prompting for immediate action is quite unnecessary and could be considered somewhat rude. -
Hi all,
I am using "linktourl" element for open a new url page.
This is done by reference property(opens in new window).
My need is to open the New URL in same window instead
of new......
Anyone can help me plz and send the codings.....I think this is double posting.....please close one thread
[link|open new URL page in same window; -
How to call a standard page from a custom BSP-iView by URL
Dear readers,
I have to implement a scenario as described in the guide "Administration of the Business Package for SAP CRM 4.0", chapter "Object Links in the Portal" scenario 1 and/or 2 (page 404).
In my case, a custom iView-BSP lists certain business partners in a tree view as hyperlinks. Which URL do I have to use for these hyperlinks to call the "Accounts" page (within role Account Management (com.sap.pct.crm.AccountManager)) with the selected business partner.
The guide informs that there exists among others a table CRMC_PRT_ROLE_MO where I can find the ID Page/Servie URL for each Role/CRM Object type/CRM Method.
My question is if I can use this URL fragment within the URL I have to build, and if yes, how must I construct the full URL to call the account page? If now, which URL must I use to call the account page?
thank you
AndreasHi Niladri,
My requirement was calling the OAF page from standard form (menu), below are the steps that I followed,
1) Get the OAF page function name
2) Personalize the form, by calling the OAF page function
a) Function Code: Give the OAF function code
b) Parameter: Here pass the parameters
example: ='contractLineId='||:OKS_LINES.ID
Note: If you are calling from a custom form you can also try using fnd_function.execute to call the OAF page
Thanks,
Bharat -
How do I Permanently remove a tab that is called "new tab" but is a Blank Page?
Every time I turn my computer on, I click my Firefox icon in taskbar at bottom, BUT, not only does my homepage tab show up, but lately I have been seeing another tab showing up beside it called "New Tab" but it is Blank. I don't how it all of a sudden showed up, but I can't seem to get rid of it. I right click & "close tab", but I have to do this every time I turn on my computer. Isn't there a way to Permanently Remove this Tab so it doesn't keep showing up on my Tab Bar?
Unfortunately that was empty too. The Firefox upgrade at that time seemed to wipe an awful lot of stuff. After searching, re-installing etc, whatever was suggested, I gave up. It was a while back. I will remember your suggestions if it ever (hopefully not) happens again though. I did have a very old bookmarks backup, but that would not import, so I did use bits of it manually but it had saved as a massive merged line of sites without my folders, so was a bit too much to fiddle with. The loss of the classical music sites was what I regretted most, no idea what they were called and cannot find some of them now. Ah well, no point in fretting about it now I suppose.
Maybe you are looking for
-
Bootcamp will not mount? Please help
I have macbook pro mid 2012 version with OSX mavericks on it. It also has a bootcamp partition with windows 8. I have divided the disk equally between the two. Everything was working fine until today. I was updating some apps on windows 8 (bootcamp p
-
Where can I found the Oracle-Validated rpm packaeg in OEL6?
Hello, I installed the OEL6 to avoid some issues I had; now I can't find the Oracle-Validated package rpm; I registered my system to UBL and nothing show up. Thanks
-
Nokia 808 pureview- Any future updates for complet...
I saw the Nokia sample image in http://www.dpreview.com/news/2012/02/27/Nokia-808-PureView-with-41MP-sensor how come the pictures can be in ISO 114 - 5.3MP, 16:9? I thought they only have 5mp and ISO 100 or 200. How can I select 101~199 ISO. ISO 58
-
I was told that upgrading the OS would slow down my machine significantly. I don't plan on using iCloud for anything other than setting up Find My iPhone. Any suggestions on how to activate iCloud with my current OS?
-
Not all music in iTunes will sync to iPhone4.
I have plenty of open available space on my iPhone4. But for some reason, not all the songs in my iTunes library will sync to the iPhone. Any ideas?? Help please! Thanks