Btanks pkgbuild do not compile. serializator.os error 1

Hi!
I am trying to package btanks, http://aur.archlinux.org/packages.php?ID=12631
but is not working ok...
any idea?
g++ -o build/release/mrt/serializator.os -c -march=i686 -mtune=generic -O2 -pipe -I/usr/include/sigc++-2.0 -I/usr/lib/sigc++-2.0/include -fPIC -O3 -Wall -pedantic -Wno-long-long -pipe -pthread -DUSE_GLSDL -DV3_DISABLE_Z -D_REENTRANT -DRELEASE -DMRTAPI=DLLEXPORT -Ibuild/release/mrt -Imrt -Imrt -Ibuild/release/mrt/src -Imrt/src -Imrt/src -I. -Isrc mrt/serializator.cpp
mrt/serializator.cpp: In member function 'void mrt::Serializator::add(int)':
mrt/serializator.cpp:99: error: 'memcpy' was not declared in this scope
mrt/serializator.cpp: In member function 'void mrt::Serializator::add(const std::string&)':
mrt/serializator.cpp:123: error: 'memcpy' was not declared in this scope
mrt/serializator.cpp: In member function 'void mrt::Serializator::add(const mrt::Chunk&)':
mrt/serializator.cpp:134: error: 'memcpy' was not declared in this scope
mrt/serializator.cpp: In member function 'void mrt::Serializator::add(const void*, int)':
mrt/serializator.cpp:144: error: 'memcpy' was not declared in this scope
mrt/serializator.cpp: In member function 'void mrt::Serializator::get(int&) const':
mrt/serializator.cpp:190: warning: left shift count >= width of type
mrt/serializator.cpp: In member function 'void mrt::Serializator::get(void*, int) const':
mrt/serializator.cpp:237: error: 'memcpy' was not declared in this scope
mrt/serializator.cpp: In member function 'void mrt::Serializator::get(mrt::Chunk&) const':
mrt/serializator.cpp:253: error: 'memcpy' was not declared in this scope
scons: *** [build/release/mrt/serializator.os] Error 1
scons: building terminated because of errors.
==> ERROR: Fallo build()
    Abortando...
Last edited by luuuciano (2008-04-21 14:48:36)

thanks a lot!

Similar Messages

  • BUG: 10.1.3 EA - make does not compile classes in error.

    Here is a simple test case to recreate the issue:
    - Create a sample project with one class. Set "use javac" option for the project and use 1.4 JDK;
    - Write a method with syntax error in it like:
    public int test(){
    return ;
    - "Make" the project. JDev reports the error. All is good as of now.
    - Without making any changes "Make" the project again. JDev does not report any errors and it doesn't look it compiles the class. For some reason it assumes that class is compiled:
    Compiling...
    [6:46:35 PM] Successful compilation: 0 errors, 0 warnings.
    This doesn't seem to be a problem if JDev compiler is used instead.
    Noel.
    Message was edited by:
    user459325

    As a follow up to the previous test case:
    If you "Clean Project" and then use make JDev gives the same message:
    Compiling...
    [6:59:23 PM] Successful compilation: 0 errors, 0 warnings.
    But apparently it doesn't compile the class.

  • Error while transforming XSLT,"Could not compile stylesheet"

    Hi,
    During transformation of my XSLT I needs to fetch data from method named *"myMethod(String str)"*, which is in *"mypackage.test.MyClass"* class. MyClass is in{color:#000000} XXX.jar. {color}
    This XXX.jar is not in context of my web application.*
    Following is part of XSLT which I am using.
    <?xml version="1.0"?>
    <xsl:stylesheet version="1.0" xmlns:aaa="mypackage.test.MyClass">
    <xsl:template match="/responseData">
    <xsl:for-each select="response">
    <XMLResponse>
    <xsl:for-each select="status">
    <xsl:variable name="Vvar_ResResponseType" select="."/>
    <xsl:attribute name="ResResponseType">
    <xsl:value-of select="aaa:myMethod($Vvar_ResResponseType)"/>
    </xsl:attribute>
    </xsl:for-each>
    </XMLResponse>
    </xsl:for-each>
    </xsl:template>
    </xsl:stylesheet>So I tried to use reflection API to load XXX.jar file at runtime.
    But while transforming Transformer does not find "myMethod(String str)" and gives error like "Could not compile stylesheet"
    Following is full exception stacktrace
    ERROR:  'The first argument to the non-static Java function 'myMethod' is not a valid object reference.'
    FATAL ERROR:  'Could not compile stylesheet'
    javax.xml.transform.TransformerConfigurationException: Could not compile stylesheet
    at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl.newTemplates(TransformerFactoryImpl.java:829)
    at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl.newTransformer(TransformerFactoryImpl.java:623)
    at com.actl.dxchange.utilities.Transformation.transform(Transformation.java:83)
    at com.actl.dxchange.base.BaseConnector.transform(BaseConnector.java:330)
    at com.actl.dxchange.connectors.KuoniConnector.doRequestProcess(KuoniConnector.java:388)
    at com.actl.dxchange.connectors.KuoniConnector.hotelAvail(KuoniConnector.java:241)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    ...........Please suggest is there any other way, so that Transformer can find required bean class from XXX.jar duruing transformation process.
    Thanks & Regards,
    Rohit Lad
    Edited by: Rohit_Lad on Jan 29, 2009 7:38 PM
    Edited by: Rohit_Lad on Jan 30, 2009 9:57 AM
    Edited by: Rohit_Lad on Jan 30, 2009 10:02 AM

    Got the solution from forum named
    "Reflections & Reference Objects"
    Following is link for whom encountered this issue.
    http://forums.sun.com/thread.jspa?threadID=5362426
    Edited by: Rohit_Lad on Jan 30, 2009 2:35 PM

  • XSLT Exception: FATAL ERROR:  'Could not compile stylesheet'

    Hi....
    Am getting Folowing Exception while parsing the XSL file. Am using java 1.4 and MSXML4.2 SP2 parser andSDK.
    but when I installed SQLServer2005, with that MSXML 6.0 Parser is Installed.
    It is working fine before instalation of SQLServer2005.
    java.lang.NullPointerException
         at com.sun.org.apache.xalan.internal.xsltc.compiler.FunctionCall.translate(FunctionCall.java:826)
         at com.sun.org.apache.xalan.internal.xsltc.compiler.ValueOf.translate(ValueOf.java:114)
         at com.sun.org.apache.xalan.internal.xsltc.compiler.SyntaxTreeNode.translateContents(SyntaxTreeNode.java:490)
         at com.sun.org.apache.xalan.internal.xsltc.compiler.XslAttribute.translate(XslAttribute.java:252)
    Compiler warnings:
    file:///F:/Data/JRun4/servers/ABC/MainXSL.xsl: line 155: Attribute 'LenderBranchIdentifier' outside of element.
    file:///F:/Data/JRun4/servers/ABC/MainXSL.xsl: line 156: Attribute 'LenderRegistrationIdentifier' outside of element.
    ERROR: 'null'
    FATAL ERROR: 'Could not compile stylesheet'
    javax.xml.transform.TransformerConfigurationException: Could not compile stylesheet
         at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl.newTemplates(TransformerFactoryImpl.java:753)
         at com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl.newTransformer(TransformerFactoryImpl.java:548)
         at com.ls.lsglobal.common.CLOUTSQLXML.TransXml2Xml(CLOUTSQLXML.java:274)
    And My XSL is
    <?xml version="1.0" encoding="UTF-8"?>
    <xsl:stylesheet version="2.5" xmlns:lsjava1="com.ls.lsglobal.common" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" exclude-result-prefixes="lsjava1" >
         <xsl:output method="xml" indent="yes" encoding="utf-8" doctype-system="MyRequest.1.3.DTD"/>
         <xsl:template match="/" >
              <REQUEST_GROUP>
                                       <TRANSMITTAL_DATA>
                                            <xsl:if test="AppraisedVal!=''">
                                                 <xsl:attribute name="AppraisedValueAmount"><xsl:value-of select="AppraisedVal"/></xsl:attribute>
                                            </xsl:if>
                                            <xsl:if test="StatedVal!=''">
                                                 <xsl:attribute name="EstimatedValueAmount"><xsl:value-of select="StatedVal"/></xsl:attribute>
                                            </xsl:if>
                                            <xsl:for-each select="ROOT/AppMain/MyLoop/Liab">
                                                 <xsl:if test=" normalize-space(LiabTypCd) = 'SMG' and (normalize-space(PresFutTypCd) = 'BOTH' or normalize-space(PresFutTypCd) = 'PRES') and PresLienPos='1' and normalize-space(RefCd) != 'LOAN'">
                                                      <xsl:attribute name="CurrentFirstMortgageHolderType"><xsl:value-of select="LiabId"/></xsl:attribute>
                                                 </xsl:if>
                                            </xsl:for-each>
                                            <xsl:attribute name="LenderBranchIdentifier">0001</xsl:attribute>
                                            <xsl:attribute name="LenderRegistrationIdentifier"><xsl:value-of select="ROOT/AppMain/MyNum"/></xsl:attribute>
                                       </TRANSMITTAL_DATA>
              </REQUEST_GROUP>
         </xsl:template>
    </xsl:stylesheet>
    And My Java Code is
    public String TransXml2Xml(String xmlInFile, String xslFile, String xmlOutFile) throws Exception
              try
                   DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
                   factory.setIgnoringElementContentWhitespace(true);
                   Document document;
                   File stylesheet = new File(xslFile);
                   File dataInfile = new File(xmlInFile);
                   DocumentBuilder builder = factory.newDocumentBuilder();
                   document = builder.parse(dataInfile);
                   System.err.println("-->AVC:::xslFile="+xslFile+" xmlInFile="+xmlInFile+" xmlOutFile="+xmlOutFile);
                   StreamSource stylesource = new StreamSource(stylesheet);
                   TransformerFactory t=TransformerFactory.newInstance();
                   Transformer transformer = t.newTransformer(stylesource);
                   DOMSource source = new DOMSource(document);
                   javax.xml.transform.stream.StreamResult result = new javax.xml.transform.stream.StreamResult(new File(xmlOutFile));
                   transformer.setOutputProperty(javax.xml.transform.OutputKeys.INDENT , "yes");
                   transformer.setOutputProperty(javax.xml.transform.OutputKeys.ENCODING, "UTF-8");
                   transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "2");
                   if(strCLUTDTD_PATH.equals(""))
                        java.util.Properties props = new java.util.Properties();
                        java.io.FileInputStream fis = new java.io.FileInputStream("DataFileBasePath.properties");
                        props.load(fis);
                        fis.close();
                        strCLUTDTD_PATH = checkNull(props.get("CLUTREQDTD_PATH"));
                   transformer.setOutputProperty(javax.xml.transform.OutputKeys.DOCTYPE_SYSTEM , strCLUTDTD_PATH);
                   transformer.transform(source, result);
              catch(Exception e)
                   e.printStackTrace();
                   throw e;
              return "";
    can any one know what solution for this problem. It is very help full for me.

    So look at your code and find out what you are passing to the TransformerFactory. Then find out why it's null. Don't just sit there and say "Duh", it's your code.
    And remember that nobody but you can see it yet. If you like you could post it here and then others could see it and comment on it.

  • Method not found in class errors when compiling project

    Hi,
    I am getting the following errors when compiling my project:
    Error(3,8): ReqLinesNotificationsVORowImpl not found
    Error(25,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(31,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(37,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(43,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(49,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(55,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(61,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(67,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(67,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(79,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(85,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(91,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(97,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(103,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(109,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(115,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(121,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(127,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(133,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(139,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(145,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(151,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(157,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(163,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(169,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(175,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(181,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(187,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Date) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(193,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    Error(199,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Date) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImplError(205,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
    I have ReqLinesNotificationsVORowImpl and ReqLinesNotificationsVOImpl files in myprojects directory. Can anyone help please?
    Thanks

    Hi,
    From the error it seems that the code is refering ReqLinesNotificationsVOExRowImpl file.
    Please make sure that its class file is present in myclasses folder.
    Since u have mentioned that ReqLinesNotificationsVORowImpl is already placed in myclasses folder. Hope this should resolve your issue.
    Regards,
    Raj Papdeja

  • Why not compile error on "incompatible interface cast"?

    simeple code here
    class IncompInterfaceTest {
    void doTest() {
    ClassB b = new ClassB();
    InterfaceA a = (InterfaceA)b;
    interface InterfaceA{}
    class ClassB{}
    javac issues "ClassCastException" on runtime rather than compile
    error.
    as i know incompatible type casting may be caught at runtime and
    compiler shows the error.
    but why compiler doesn't do it's job for interfaces? it's just so
    clear to be compile error to me.
    ps. in a case ClassB is final class, compiler issues a error.
    (a thread I started in google groups)
    http://groups.google.co.kr/group/comp.lang.java.programmer/browse_thread/thread/c9c12a8864672436?hl=ko#

    sun9h0st wrote:
    thanks for reply.
    I think i might know something wrong about class, object concept, so I wish you tell me more about it.
    As I though the code below means
    ClassB b = new ClassC();'b' can be an Object of ClassB as a subclass of ClassC.
    'b' IS an Object of ClassC.b is not an object.
    b is a variable that can point to an instance of ClassB or to an instance of any subclass of ClassB.
    >
    so
    b instanceof ClassB == true // as it can be
    b instanceof ClassC == true // as it is
    If b is not null, the first line will always be true.
    If b points to a ClassC or a subclass, the second one will be true.
    It means actual Object(something behind 'b' pointing, i don't know what i call it) is from ClassC to me. (somewhat like c pointer,
    'b' is a bowl that called Object and actuall instance is refered by 'b')No idea what you're saying here.
    if b IS an Object of ClassB
    shouldn't "b instanceof ClassC" is false?If we have C extends B, then...
    B b1 = new B();
    B b2 = new C();
    b1 instanceof B // true
    b1 instanceof C // false
    b2 instanceof B // true
    b2 instanceof C // true
    I Think compiler should be known that instance 'b' hold. No, it doesn't, and it's good that it doesn't, as it keeps the language simpler and more consistent.
    Also, b doesn't hold an instance. It holds a reference to an instance.

  • NiseCfg library link errors - will not compile working code on replicate system

    i have working software trying to install on a replicate system.    it does not compile on the replicate system.   the problem is nise, niseCfg link errors  for example:  
    Undefined symbol:  '_niseCfg_GetVirtualDeviceProperty@20' referenced in "TestSystem_Config.c"
    originally it complained it couldn't find the nise.h and niseCfg.h header files.   i copied the header and some other object and fp files (yeah, yeah, i know :-/ from my working system to the replicate system (in the NI/Shared/CVI directory path).
    it then found the header file and prototypes but now the undefined link errors.   i have nise.dll in my WIndows System directory.
    Please help.   what do i do to fix this?   thanks!

    The CVI IDE needs to know someway where to find the resources your program is using and this can be done in several ways. One of them is loading the instruments in the Instrument menu: this is valid if your instrument is used in only one project of yours or a few one. Another method, which is useful for insrtument you use intensively in all your projects, is to add them to the Library menu (option Customize...): this will make your libraries and FPs available for every project you are working on without need to explicitly add the instruments to the Instrument menu.
    If you are using an instrument and you don't see it in the project it must be loaded in one of the ways I described before: you can check in the original system which method was used.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • [SOLVED] haskell - citeproc-hs was not compiled with bibutils support

    Hi all,
    since I have not yet been able to get help in arch-haskell's IRC channel, I am posting here, maybe someone has an idea:
    I am using pandoc which I have retrieved along with all its dependencies from the haskell binary repository. But when I try to process a bibliography, I get an error message from citeproc-hs:
    pandoc: citeproc: Bibliography format not supported.
    citeproc-hs was not compiled with bibutils support.
    Supposing that the error message is not misleading, I wonder how do I recompile with bibutils support then?
    Googling gave some results concerned with haskell-hs-bibutils, which seems to have been on the haskell repo earlier but is there no longer, so I installed it from AUR (modifying the PKGBUILD to accept haskell-syb>=0.3 instead of =0.3).
    Reinstalling haskell-citeproc-hs did not help.
    Next I tried with cloning habs the haskell repo (as is described here). Since I could not find any switch in haskell-citeproc-hs's PKGBUILD that would disable bibutils support I directly issued
    ./makeahpkg -- haskell-citeproc-hs
    but the resulting package gives the same error as the one from the repo.
    Should I have taken extra steps to build/install haskell-hs-bibutils also in the habs chroot? Or anything else?
    TIA,
    Andreas
    Last edited by awagner (2012-08-01 08:36:06)

    awagner wrote:Should I have taken extra steps to build/install haskell-hs-bibutils also in the habs chroot? Or anything else?
    Yes, it seems this was the problem. Besides cloning habs, I now went on to manually copy the necessary files of bibutils-dynamic and haskell-hs-bibutils from AUR into the local HABS tree, modify dependencies in haskell-hs-bibutils, haskell-citeproc-hs and haskell-pandoc (an additional dependency on haskell-hs-bibutils in haskell-citeproc-hs, in the other cases only change of version numbers).
    Then
    ./makeahpkg -c -- bibutils-dynamic haskell-hs-bibutils haskell-citeproc-hs haskell-pandoc
    produced four packages which I could install and now the error is gone and I can turn to debugging my document and bibliography files

  • Error on compile but no errors in source code code??

    Error(284,33): illegal forward reference in the CharacterDataLatin1.java which is not part of my project.

    I had the same error and caught it out. The cause is not into the code.
    Application: Oracle JDeveloper 10g on Fedora Core Linux 4
    Versions: 10.1.2, build 1811 (Jan 2005) and the new 10.1.2.1, build 1913 (Aug 2005)
    ERROR DESCRIPTION (BOTH BUILDS 1811 AND 1913):
    Compiler Messages:
    /usr/java/j2sdk1.4.2_04ojvm/src.zip!/java/lang/CharacterDataLatin1.java
    Error(284,33): illegal forward reference
    /usr/java/j2sdk1.4.2_04ojvm/src.zip!/java/lang/CharacterData.java
    Error(956,33): illegal forward reference
    /usr/java/j2sdk1.4.2_04ojvm/src.zip!/javax/swing/JFrame.java
    Warning(406,23): method setMenuBar(javax.swing.JMenuBar) in class javax.swing.JRootPane has been deprecated
    Warning(416,30): method getMenuBar() in class javax.swing.JRootPane has been deprecated
    /usr/java/j2sdk1.4.2_04ojvm/src.zip!/java/util/Locale.java
    Warning(25,1): import java.io.* partially used, should be replaced by
    import java.io.ObjectOutputStream;
    import java.io.IOException;
    import java.io.ObjectInputStream;
    import java.io.Serializable;
    etc.
    Compilation complete: 2 errors, 372 warnings.
    ERROR DURING THE FIRST START OF THE BUILD 1913:
    An error ocurred while opening jar:file: /usr/java/j2sdk1.4.2_04ojvm/src.zip!/org/apache/xpath/objects/XString.java
    Details:
    Exception Stack Trace:
    sun.io.MalformedInputException
    at sun.io.ByteToCharUTF8.convert(ByteToCharUTF8.java:149)
    at sun.nio.cs.StreamDecoder$ConverterSD.convertInto(StreamDecoder.java:247)
    at sun.nio.cs.StreamDecoder$ConverterSD.implRead(StreamDecoder.java:297)
    at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:182)
    at java.io.InputStreamReader.read(InputStreamReader.java:167)
    at oracle.javatools.buffer.UnsynchronizedReader.fillBuffer(UnsynchronizedReader.java:162)
    at oracle.javatools.buffer.UnsynchronizedReader.read(UnsynchronizedReader.java:85)
    at oracle.javatools.buffer.AbstractTextBuffer.normalizeEOL(AbstractTextBuffer.java:1477)
    at oracle.javatools.buffer.AbstractTextBuffer.read(AbstractTextBuffer.java:1301)
    at oracle.ide.model.TextNode$TextBufferWrapper.read(TextNode.java:1111)
    at oracle.ide.model.TextNode.loadURLContentIntoBuffer(TextNode.java:923)
    at oracle.ide.model.TextNode.reloadTextBuffer(TextNode.java:393)
    at oracle.ide.model.TextNode.reloadNode(TextNode.java:377)
    at oracle.ide.model.TextNode.open(TextNode.java:223)
    at oracle.jdevimpl.jotimpl.src.SrcFile.getNode(SrcFile.java:1756)
    at oracle.jdevimpl.jotimpl.src.SrcFile.init(SrcFile.java:170)
    at oracle.jdevimpl.jotimpl.src.SrcFile.<init>(SrcFile.java:150)
    at oracle.jdevimpl.jotimpl.src.SrcFile.createFile(SrcFile.java:127)
    at oracle.jdevimpl.jotimpl.internal.database.DatabaseFragment.createFile(DatabaseFragment.java:526)
    at oracle.jdevimpl.jotimpl.internal.database.ClassDatabase.getFile(ClassDatabase.java:724)
    at oracle.jdevimpl.jotimpl.JotWorkAreaImpl.getFile(JotWorkAreaImpl.java:738)
    at oracle.jdevimpl.jotimpl.addin.CacheFactory.buildData(CacheFactory.java:336)
    at oracle.jdevimpl.jotimpl.addin.CacheFactory.buildParseData(CacheFactory.java:378)
    at oracle.jdevimpl.jotimpl.addin.CacheFactory.create(CacheFactory.java:108)
    at oracle.jdevimpl.jotimpl.addin.JotRunnable.buildLibrary(JotRunnable.java:608)
    at oracle.jdevimpl.jotimpl.addin.JotRunnable.loadLibrary(JotRunnable.java:124)
    at oracle.jdevimpl.jotimpl.addin.JotRunnable.run(JotRunnable.java:64)
    at oracle.jdevimpl.jotimpl.addin.JotCacheThread.run(JotCacheThread.java:57)
    CAUSE:
    The Project Properties. Menu: Tools >> Project Properties >> Profiles >> Development >> Compiler.
    Uncheck "Update Imports" and that's all. Character Encoding: UTF8. For the target JDK 1.4 it's necessary to "Enable J2SE 1.4 Assertions". The "Self-Deprecation Warnings" produces an excessive amount of deprecation warnings. The OJVM' Patch is recommended (see <jdeveloper_install_directory>/jdev/install.html and readme.html).
    Of course, if this is the case.
    null

  • Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18

    Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18 while using Adobe Premiere Pro.
    Process:         Adobe Premiere Pro CC 2014
    Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
    Identifier: com.adobe.AdobePremierePro
    Version:         8.1.0 (8.1.0)
    Code Type: X86-64 (Native)
    Parent Process: launchd [2538]
    Responsible:     Adobe Premiere Pro CC 2014
    Date/Time: 2015-01-06 14:04:23.500 -0700
    OS Version:      Mac OS X 10.9.2 (13C64)
    Report Version:  11
    Crashed Thread: 55  Dispatch queue: com.apple.root.default-priority
    Exception Type: EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    Customer created test export with 777 permissions and set mount parameters to the following:
    mount_nfs -o vers=3,tcp,rdirplus,intr,nolocks,async,rsize=32768,wsize=32768
      -- Original mount options:
         General mount flags: 0x40 async
         NFS parameters: vers=3,tcp,nolocks,rsize=32768,wsize=32768,rdirplus
      -- Current mount parameters:
         General mount flags: 0x4000058 async,nodev,nosuid multilabel
         NFS parameters: vers=3,tcp,port=2049,nomntudp,hard,nointr,noresvport,negnamecache,callumnt,nolocks,quota, rsize=32768,wsize=32768,readahead=16,dsize=32768,rdirplus,nodumbtimr,timeo=10,maxgroups=16 ,acregmin=5,acregmax=60,acdirmin=5,acdirmax=60,nomutejukebox,nonfc,sec=sys
    The pcap shows once the movie is created a lockup call is responded from Isilon with Error: NFS3ERR_NOENT
    478         V3 CREATE Call (Reply In 479), DH: 0xea5f731c/QBRSN-0-0-1.mov Mode: UNCHECKED
    479         V3 CREATE Reply (Call In 478)
    484         V3 LOOKUP Call (Reply In 485), DH: 0xea5f731c/._QBRSN-0-0-1.mov
    485        V3 LOOKUP Reply (Call In 484) Error: NFS3ERR_NOENT
    V3 LOOKUP Reply (Call In ....) Error: NFS3ERR_NOENT  -   This is by design of OneFS, we coalesce files and then flush them out to disk which is why the commit time is accurate but the file is not immediately available. however when an async option is used within the mount options this should be avoided if writing asynchronously to the cluster.  Has anyone else seen this behavior lately? (current workaround is to store locally and transfer to the cluster via Finder)

    That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard.  FAT32 only allows for file sizes up to 2 gigs.  And as soon as it reaches that...I would get that error.  I don't know if that is why you are getting that error...but it would be easy to check.  1) are you generating a file that is over 2 gigs?  2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

  • Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

    Hello,
    While exporting Export reporting from BI4 getting exception
    Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
    In Trace Log I am getting
    com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
    java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
      at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
      at java.util.ResourceBundle.getString(ResourceBundle.java:334)
    I tried following solution according to the all forums but still issue exist.
    Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
              <JVMMaxHeap>64000000</JVMMaxHeap>          <JVMMinHeap>32000000</JVMMinHeap>
    Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
    Check for temporary read write permission on server
    Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
    Can you please let me know is there anything missing.

    Hi,
    We face the same problem with some BI4 reports.
    The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
    This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
    Hope it can help.
    Ludovic.

  • "Error Compiling Movie: Unknown Error" or program crash when rendering

    I just built a new PC because my Macbook Pro couldn't render fast enough. Now that I have built this brand new computer, I can't render at all! I render once and get the "Error Compiling Movie: Unknown Error" and if I try to render again, the program crashes.
    My files are not corrupt as I can render them without problems on my laptop (just slowly) and on a friend's PC. I can export fine but the project I am working in is currently very small. I have 450gb of space and when using After Effects, rendering is a breeze. I have restarted, uninstalled and reinstalled and nothing seems to be doing the trick.
    I feel like this must be a bug in Premiere Pro CC. Has anyone had this problem and/or come up with any solutions?

    You may have more luck getting help with this kind of problem on the AME forum. Or at least have a look at this page from the AME forum prompting you for the information that can help in isolating the cause of this problem: http://forums.adobe.com/thread/1011883.

  • One cause for "Error Compiling Movie: Unknown Error"

    I just finished a huge promotional video project, one which was fraught with problems.
    To start out with, most of my interview footage was RED Epic material, and my b-roll was comprised of a combination of RED Epic (some at 4kHD and some at 5k), RED ONE (some at 4k, some at 3k), XDCAM-EX 1080p, HDV 1080i, Sony AVCHD 1080p, previously exported Vimeo HD h.264 material, and still shots. Needless to say, quite a mess of codecs and odd file types to combine into one project.
    Since much of my b-roll was 1080p, I decided to do my entire edit on a 1080p timeline; however, since all my interview footage was RED, I decided to use a RED Epic 1080p timeline. In doing so, I discovered something important about Premiere, and I don't know if this is a bug, or if it's meant to work this way: when you put 5k RED Epic material on a 1080p timeline and use the zoom controls in the motion effects panel to bring it to size, and attempt to export, you'll get the "Error Compiling Movie: Unknown Error" every time. This may happen with other types of footage that's too big for the timeline too, i'm not sure. However, when you instead right click on the clip and use the "scale to frame size" command, it exports just fine, with no errors.
    I also discovered that (at least with my setup), PrPro can't handle large stills on the timeline; I contiually got OpenGL crash errors until I resized all my images in Photoshop to be no more than 1920px wide.
    The promo video is 11:30, and comprised of five segments. I edited each segment (interview and b-roll) in it's own sequence, and then nested the sequences along with the transition/motion graphics/title slides between them on my master sequence. However, I kept getting crashes and freezes when attempting to export that master sequence which I couldn't explain. Ultimately I had to export each of the individual sequences as a Lagarith UT AVI file, and then import that file back in and place it in the master sequence where the nested sequence had been. Once that was done it exported fine, so I'm still not sure what the problems were, since each individaul sequence exported okay, and the master exported just fine after replacing the nested sequences with the Lagarith clips...
    Anyway, I think I've got a pretty good promo done, and it's definitely a TON better than our last one. When I get it online I'll post a link over in the Lounge and ask for feedback...

    So, I ran into this the first time recently. I discovered it when I copied an adjustment layer for quick grading with an RGB Color Corrector and Color Balance effects in it from a rehearsal cut of a short film.The effects worked fine and rendered out without issue. I imported the sequence into my 'final' cut so I could reuse the titles and adjustment layer. I copied the adjustment layer to the new rough cut of the final sequence and ran into this error when I tried to render it, but only after applying the adjustment layer. I found that if I turned off the Color Balance, the sequence rendered fine. I found that if I moved the Color Balance above the RGB Color Corrector, the effect of the RGB effect completely disappeared AND it rendered correctly (both effects turned on) - so reversing the order worked, but effects were weird. I also found that if I added ANY non-GPU accelerated effects to the RGB Color Corrector that I'd get the same compile error (unknown).
    I went through and deleted clips until I got to 0 on the timeline, added a new one back on, and it still wouldn't render. So, I created an entirely NEW sequence, copied all video and audio (not adjustment layer) from the original failing rough cut of the final sequence, and pasted it into this new sequence. I also copied the adjustment layer again from the rehearsal cut into this new sequence and it is rendering just fine.
    HOURS WASTED DOING THIS! It would be awesome if Adobe actually tested their products before releasing them instead of forcing us to do it for them. My project consisted of about 30-40 different clips and audio, all from the same DSLR (Nikon D810), nothing fancy, two effects in an adjustment layer applied to the entire sequence, and Premiere couldn't handle it. Given this and some of the comments I read while troubleshooting this on this forum, gives me pause in trusting Adobe products for any real work that has a deadline (unless, of course, you build in the required Adobe testing time into your budget).
    So, just another data point; something else to try. Create a new sequence, and copy everything from your non-working one to it, and see if this will jump-start Premier. Worked for me. Good luck.

  • CS 5.5 Export - Error Compiling Movie - Unknown Error

    I am running CS 5.5 and every time I export in Premiere or in Media Encoder - I get this message:
    Error Compiling Movie - Unknown Error
    I have tracked it down to a video clip with alpha channel. I have some animated overlays - If I turn off this layer it exports fine, but unfortunately I need the animated video with alpha in the exported file.
    The video is using the Lagarith Codec. I have updated the codec and still getting the error. I have also tried using other codecs that support an alpha channel, like the Matrox IFrame with Alpha codec and the same problem exists.
    These are TV shows and I need to get this resolved if anyone has any suggestions. I've done hundreds of these same formatted shows in the past, so it is not my system, drives, cpu, etc. This did not happen on previous versions of Premiere Pro.

    Hm-m,
    Obviously, you are using the Alpha Channel for some Transparency. Are there any other Effects applied to that problem Clip?
    If you could post a screen-cap, showing that Clip Selected (and probably the Effects Control Panel also), plus the underlying Clips on the Timeline, perhaps someone can see an issue there.
    You do have the 64-bit version of Lagarith installed, don't you?
    Good luck,
    Hunt

  • Error Compiling Movie: Unknown Error - Simple Solution in Premiere

    ADOBE PREMIERE EDITORS: Be forewarned about the infamous "Error Compiling Movie: Unknown Error." It usually doesn't happen unless you're editing a big project like I am and then it screws with you because you've been editing fine until it's time to export and you can't even make your project into a movie, which defeats the purpose of all your hard work. I looked up forum after forum and finally there were a-few solutions that worked for some and not for others. (Adobe said they will get their team on this case right away.) Let's just say I do not have Final Cut Pro, so I cannot export to XML and then import into FCP to do the exporting like some people found helpful. Nor do I have the time to import my Premiere project into After Effects only to manually create all of my "dip to white" transitions. But I would have had to do that if nothing else I tried worked and thankfully, I was able to trick Premiere. It's so simple, it's stupid. Just open a new project in Premiere. Then "import" the project you wanted to export. For some odd reason, without changing anything of substance or in other words, doing practically nothing about the issue, it exports now. Just because I opened a "new" project and "imported" my old project. Of course, this may not work for others, but please try it and then reply your results. Me and I'm sure Adobe would find it very helpful to see if that worked for most people. It worked for me.
    [Profanity is not permitted.  Removed.  Please keep your language family-friendly.]

    I agree, Jim, but my train of thought was that a lot of people were changing and replacing and taking out effects and clips from their sequence to see if it was the components in the sequence that was causing the "unknown error." However, I had the same "unknown error" and was able to export in Premiere anyway by just practically "telling" Premiere that it's a new project, when I'm importing an old project to do the same task. Which makes me think that maybe Premiere doesn't have a problem exporting the specific files that most people thought were the problem, maybe it was just a glitch somewhere in Premiere that made the software think there was a problem after a certain amount of time, when there really wasn't. I don't know, I'm not a coder so that's just my layman guess. I did notice that Premiere was exporting/rendering fine when I was just beginning my project, but after it got to a certain length, that's when I couldn't render or export anymore. It honestly baffles me too. It would be useful to see what the results are if other people tried this simple switch-a-roo so possible issues can be narrowed down.

Maybe you are looking for