Bug: Diff fails for multiple constraints on one column.

Hi all,
I think, I came across a bug in SQL Developer:
SQL Developer version: 3.0.04
create table USER_A.foo (val NUMBER not null, CHECK (val IN (1,2,3)));
create table USER_B.foo (val NUMBER not null);
Comparing these two schemas does not give any difference. However, when not null constraints are removed from both tables, then check constraint difference is correctly reported.

Does not reproduce in SQL Dev 4. Seems like the comparison mechanism was changed, so can close the topic

Similar Messages

Is it possible to combine multiple Pur Reqs for multiple materials to one vendor into one PO through MD07?

We have material planners who use MD07 (traffic signal screen) Stock/Requirements List, Collective Access tab to review material requirements by MRP Controller. Once the list is created, they select individual materials and review them in MD04. In a lot of cases, Purchase Reqs (PRs) are reviewed and adopted into POs individually for each material. Sometimes they will combine multiple PRs for one material into one PO. This is a good practice. However, from what I have found, it is not possible to combine multiple PRs for multiple materials into one PO. If this was done it would dramatically reduce the number of POs that we are issuing to suppliers. Problem statement: We issue too many POs which causes additional influxes down the line (receiving dock/goods receipts processing, receiving issues, invoices, invoice issues, etc.). Does anyone know of a way to address this problem without a major overhaul in approach or customization of the system? Thank you in advance!

Hello Michael
As far as I know, this is not possible directly from MD07, only from the MM transactions.
The following thread suggests the following procedure to convert several PRs into one PO:
Conversion of multiple PR into single P.O
Drag and drop the first PR from the item overview to the shopping card on top of ME21N,
then open the PO detail delivery schedule tab and drag and drop all other PR to the shopping card shown in the schedule tab
You can use the same procedure, calling the order conversion from MD07 and then drag and drop another PRs into this PO.
BR
Caetano

I am setting up a Numbers table for gas milage using one column for gallons divided by the next column of miles and having the answer in the third column in miles per gallon.

I am setting up a Numbers table for gas milage using one column for miles and the next column for gallons, the two to be divided to produce the third column of miles per gallon and am unable to find out how to do that. Add and/or subtract, yes, but not to divide.

...and results in yield signs indicating an error:
Hi Wayne,
Yield signs must be different in Texas. Here (and in much of the rest of the world) they're white with a red border, and installed with an apex pointing down:
Some still include the word "Yield" (or in Quebec, "Cedez"in black letters.
Maybe you're thinking of the "Warning triangle", which is similar, but installed base down, and often including a symbol in the white space:
These are more common in Europe, with the exception of the portable version, which I've seen used at road construction sites or as 'flares' to warn of a disabled vehicle on the road.
Or maybe you were thinking of this
(Most of these 'slow moving vehicle' triangles have an orange center. This one looked a bit more 'Texas,' though.)
Cheers,
Barry

Directory Structure for multiple applications at one host

Can I have multiple (more than one) WEB-INF directory structures in the public_html directory for different web applications? If I do this, how do setup the url-pattern in the Servlet Mapping tag in the web.xml file? How do I setup the URL that calls the servlet from the HTML that has been send to the user�s browser?

If I understand your question, you want multiple contexts. All App Servers/Web Servers allow you to setup multiple contexts. Normally if your root context is in /home/myhome/app_server/
then you would setup multiple contexts by creating a folder for each context:
/home/myhome/app_server/context1/
/home/myhome/app_server/context2/
Each would have their own full application/website. And the way to reference these would be as such:
if the domain, www.mydomain.com, is mapped to /home/myhome/app_server/
www.mydomain.com/context1/
www.mydomain.com/context2/
I think that is what you were asking. Hope it helps

How to install applications for multiple iPads with one ID?

Hey guys,
I have to prepare many iPads for work, and I've found the process to be very redundant. In order to ensure that the applications are tied to the ID of the final client, I have to first create an account under my email, download all the applications and then change the email to the client's. Now when I have to prepare another device, I have to delete the applications in iTunes and re-download them with a new account to make sure they are tied to the next ID. Is there a way to download and sync all the applications under one ID, and not have issue with updates in the future? Keep in mind I'm only installing free applications.

I was referring in particular to the logs that are created by Workshop
itself (in the workshop directory). It creates workshop.log and netui.log.
Raj Alagumalai wrote:
Steven,
which workshop log file are you referring to ?
the workshop log files are usually saved to the domain directory.
If the developers are each going to start their own server instances then
there should be no issues.
The best option for you is to create multiple domains for each developer.
They will share the same workshop installation, but they will each have
their own instances.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Steven Ostrowski" <[email protected]> wrote in message
news:[email protected]..
Hello,
What is the best way to install the WL 8.1 Platform for multiple
developers on a single UNIX machine? These developers may start
concurrent instances.
The problems I see are that the log files generated by Workshop would
be shared among concurrent users, permissions would need to be set so
that the user that is running the instance that creates the log files
will need to create the file with permissions that everyone can use. Are
there any other issues to doing this?
I could not find the information on this in the documentation.
Thanks

Use case for multiple crosstabs under one datasource

I'm trying to understand why one would have multiple crosstabs for one datasource. When I change one crosstab, it changes the other crosstab. I was could have a different layout for multiple crosstabs.
Thanks.
Regards,
Mel Calucin

Hi Mel,
I am not following this question; would it be possible to rephrase it?
You could have multiple tabs for a data source - such as a one tab showing the result set in a cross tab and the other for a chart.
Tammy

HELP: Customizing ESS Leave Request for multiple entries in one submission

Hi experts,
I appreciate help on this urgent problem. We're on ECC6 with EP7. My customization requirements are below:
1) Allow multiple leave entries to be submitted at one go. Standard ESS only allows one date range entry per submission. We've customized the Webdynpro Leave request form to allow multiple entries in table form.
Assuming there's 3 requests:
R1 ~ 01-Oct-2007
R2 ~ 03-Oct-2007
R3 ~ 05-Oct-2007
Whenever user clicks 'New Entry' button, Webdynpro will call bapi PT_ARQ_REQUEST_PREPARE to generate a new request ID.
When user clicks on 'Review' button, I will loop at the requests internal table and check each of the entries, which is an individual request, via BAPI PT_ARQ_REQUEST_CHECK. Am I doing correctly so far?
The checks return no error. Next comes the problem. When I click the 'Send' button, I will loop at the request IDs (in ascending order) into BAPI PT_ARQ_REQUEST_EXECUTE. I will get a dump, saying that the object cannot be found. Debugging shows that it cannot find the first request ID (R1) in the memory. I found that if I sort the request IDs in descending order, it will be able to find the last request (R3) and could process it. However, when it comes to the 2nd last request (R2), it will give me the same dump saying that object can't not found. Both R1 and R2 cannot be found whereas only R3 can be found.
In overview, the logic we adopted is like this:
1) PT_ARQ_REQUEST_PREPARE-CREATE (R1)
2) PT_ARQ_REQUEST_CHECK (R1) upon clicking 'New Entry' Button
3) PT_ARQ_REQUEST_PREPARE-CREATE (R2)
4) PT_ARQ_REQUEST_CHECK (R2) upon clicking 'New Entry' Button
5) PT_ARQ_REQUEST_PREPARE-CREATE (R3)
6) PT_ARQ_REQUEST_CHECK (R1, R2, R3) upon clicking 'Review' Button
7) Loop PT_ARQ_REQUEST_EXECUTE ( R3 - Returns OK, R2 - Returns object not found and terminates, R1 - not processed because execution terminated by R2).
Can anyone please advise me how I should go about changing the BAPIs? Or are the CLASSes/BADIs to be changed?
<b>Points will be rewarded for helping with this urgent requirement.</b> Thank you.
Regards,
Damien

Hi Kiran,
Thanks for replying. My guess initially was also that the requests are overwritten.
I heard of another company's implementation who did the same concept and was able to do it. Unfortunately, I'm unable to get any information from them.
Initially, my frontend programmer and I thought of adopting the 'dummy checks' methodology. i.e. Do dummy checks when clicking 'New entry' or 'Review' button. This is to ensure that the entries were entered correctly at front end. Only when the user clicks on the 'Send' button, my BAPIs take in a table of request entries and perform the Request_Prepare&Request_Check&Request_Execute one at a time.
This may be expensive as there will be double the processing needed. One set for dummy checks and one set for the actual backend processing.
Is there any way that I can create multiple requests in 'transcient' state so that it won't be overwritten and I can still find it when I call the BAPI PT_ARQ_PREPARE_EXECUTE? PT_ARQ_PREPARE_EXECUTE only takes in request IDs instead of request structures.
Thanks again, Kiran, for replying. Have a good weekend.
Regards,
Damien

How to use Keychain for multiple users on one computer?

I have a new Macbook Pro with Yosemite. I just moved over from PC for my work computer and the Keychain thing is killing me! I am a social media consultant so I manage multiple accounts for multiple clients. I need a way to log in and out as them on many different platforms. The reality is that I am the only user but I log in and out of different things as if this was a public computer with multiple users.
PC allowed me a drop-down option with each login. For example the email box could be clicked and then I could select the client email that I needed to fill in. The password would then auto-populate. Is there any setting I can change to make this happen on a Macbook? I have been logging in, deleting the info in Keychain, then logging in for the next client, delete...etc.
Most password managers don't work because of this same problem. Please don't recommend a password manager app unless it can handle logging in and out of (for example)10 different LinkedIn profiles.
Any advice would be greatly appreciated!

Tanja Turtsanyi wrote:
I have a new Macbook Pro with Yosemite.
Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.
Mac OS X (10.4)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

How to execute KISR for multiple cycles in one step?

CO Experts,
I have a business reqirement to reverse the previous month assessments into the next period. I am planning to use KISR, but I could not find any way to execute KISR for multiple cycles, similar to the RKGALKSU5
program ? Is there any program available to makes possible the above ?
Thanks and Regards
Peter

Hi Samir,
Please feel free to take a look at Liaison Messenger EDD, www.liaisonsc.com
Messenger EDD automates business form and report distribution and uses your existing SAP reports. The end user selects either a batch or a single document through your normal print process in SAP but now uses our Messenger EDD print driver and Messenger will then distribute the documents selected based on rules you set up at initial configuration.
For example, through the single print selection:
- Distribute Invoices to the customers preference (print, fax, or email) if email, it attaches a PDF of the document
- Archive a copy to desired folder
- Print a hard copy to attach to other paperwork
- Attach a static or variable attachment like terms and conditions, marketing PDF, or supporting variable documents.
* PDF creation is included with the product.
Set up similar rules for Sales Orders, PO's, Statements or even shipping documents like Packing Slips, Picking Tickets, Bills of Lading and
International docs, etc.
Please reach me at [email protected] or 714.543.9877x201 if you have any questions or would like to view an on-line demonstration.
Best Regards,
Tom Nielsen
Liaison Software

Managing apps for multiple users in one iTunes library

Hi - my wife and I both have iPhones and separate iTunes ID's. We both share music in one iTunes library and sync to the same library. We also backup our phones to that same computer. We have some apps on both phones (for example, Pandora) and when we backup/restore our phones, iTunes apparently will put "my" version of apps on her phone and "her" version of apps on my phone. Afterwards, when I update apps, my phone will ask for BOTH my iTunes ID AND her iTunes ID. Similarly, her phone asks for both her ID and my ID. Presumably, this also uses two of my FIVE authorized devices, which is also a problem.
My question is how can we manage our apps separately on iTunes so that we can get rid of this annoying behavior? It is very common for families to share one common iTunes library, so I don't see why this would be unsupported.
Thanks for any assistance!

Bump

Generating hashes for multiple shares in one folder using BranchCache Publish-BCFileContent -Path

When using Publish-BCFileContent to generate hashes for multiple shared directories that are all within the same parent directory, can I just specify the parent directory as the "-Path" parameter or do I need to run the cmdlet for each share
separately?
For example:
My file server has 3 separate shared folders:
E:\Shares\Documents
E:\Shares\Music
E:\Shares\Pictures
(E:\Shares is not directly shared)
To generate hashes for all 3 shared directories to export to a remote hosted cache computer could I run the Publish-BCFileContent cmdlet just once with just E:\Shares as the -Path parameter?
Publish-BCFileContent -Path E:\Shares -StageData
Or do I need to run the cmdlt 3 separate times as below?
Publish-BCFileContent -Path E:\Shares\Documents -StageData
Publish-BCFileContent -Path E:\Shares\Music -StageData
Publish-BCFileContent -Path E:\Shares\Pictures -StageData

Hi CharlesPool,
If there are only these three subfolders under the directory E:\Shares, you can try the cmdlet:
Publish-BCFileContent -Path E:\Shares -StageData -Recurse
Use the recurse parameter to specify that hashes are created for content in subfolders. If you do not use this parameter, then hashes are created only for content in the top folder and no hashes are created for content in subfolders.
If there are other folders under D:\Shares, you need to run the cmdlet separately, and you can also use the cmdlet foreach to loop every folders (E:\Shares\Documents, E:\Shares\Music, E:\Shares\Pictures):
$folders = "E:\Shares\Documents","E:\Shares\Music","E:\Shares\Pictures"
Foreach($folder in $folders){
Publish-BCFileContent –Path $folder –StageData}
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

Best Practice for Multiple iTunes and One Account?

My wife and I share our account for our iPhone Applications and Songs in iTunes.
Can someone point me to a topic that covers a best practice for multiple iTunes syncing?
I travel a lot and keep my iPhone synced to my Macbook Pro while she uses the workstation at home to sync to. We keep the addresses and contacts and calendars synced through MobileMe, however, I'm trying to find the best way of pushing applications and songs I've bought over to the other PC so they're still around while I'm traveling for her to sync with.
Thoughts?

Hi Steve,
Might be trying for solution for a long time, If i understood your question clear let me clarify you few points.
You are trying to access the bex query which is designed with the exit's in the background based on the logic and trying to call the entire dimensions and key-figures in a single connection. Then you are trying to map those data in the charts.
Steve, try to make more connections based upon the logic and split them. use the same query but split them by sales per customer group, sales per day, sales per week by making three different connections and try. You can merge the prompts from all connections.
Hope this Helps!!!
Sorry if i misunderstood your question.
--SumanT

Unlimted License Patch fails for multiple versions of Server Express

I'm following the directions for installing and licensing two versions of Microfocus Server Express for a PeopleTools 8.52 upgrade. When I get to the point where I apply the Unlimited License Patch (ULP), the application to the first version goes fine, showing a successful "installed" message. After installing the other version of Server Express, I try to apply the ULP again and this time it returns an "uninstalled" message. Eventhough I had COBDIR set to the 2nd installation, the ULP deinstalled the patch for the first installation. I'm doing this as the root user but I have su'ed to root. This worked fine 2 years ago. What am I missing in the environment that prohibits me from installing the ULP for multiple versions of Server Express?

LD_LIBRARY_PATH

SM20 logs for multiple users in one go.

I have to extract log for more than 100 users by using SM20 log.
I tried with wild card characters, it is not giving accurate user list.
Is there a way to paste 100 users at one time in SM20 tcode to pull the all users audit log instead of getting each user.

Good...
It shows the all users log report for current application server,but not all apps. server.
I have 7 application server but it shows the currenty apps server logson details.
Is it possible to get all application server logs details for all users in one go.

Collecting data from multiple rows into one column

I'd like to run a query and put a collection of items into one output column instead of multiple rows. See the example below:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - Prod
PL/SQL Release 10.2.0.5.0 - Production
"CORE     10.2.0.5.0     Production"
TNS for 32-bit Windows: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
     CREATE TABLE "SKIP"."INGREDIENTS"
   (     "INGRED_ID" NUMBER,
     "INGRED_NAME" VARCHAR2(20 BYTE),
     "STORES" VARCHAR2(20 BYTE)
   ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
REM INSERTING into SKIP.INGREDIENTS
Insert into SKIP.INGREDIENTS (INGRED_ID,INGRED_NAME,STORES) values (1,'SEA SALT','Food lion');
Insert into SKIP.INGREDIENTS (INGRED_ID,INGRED_NAME,STORES) values (2,'TABLE SALT','Food lion');
Insert into SKIP.INGREDIENTS (INGRED_ID,INGRED_NAME,STORES) values (3,'FLOUR','Piggly Wiggly');
Insert into SKIP.INGREDIENTS (INGRED_ID,INGRED_NAME,STORES) values (4,'YEAST',null);
Insert into SKIP.INGREDIENTS (INGRED_ID,INGRED_NAME,STORES) values (5,'BEER','ABC Store');
CREATE TABLE "SKIP"."PRETZELS"
   (     "PRETZEL_ID" NUMBER,
     "PRETZEL_NAME" VARCHAR2(20 BYTE),
     "PRETZEL_DESC" VARCHAR2(100 BYTE)
   ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
REM INSERTING into SKIP.PRETZELS
Insert into SKIP.PRETZELS (PRETZEL_ID,PRETZEL_NAME,PRETZEL_DESC) values (1,'CLASSIC','Classic knot pretzel');
Insert into SKIP.PRETZELS (PRETZEL_ID,PRETZEL_NAME,PRETZEL_DESC) values (2,'THICK STICK','Straight pretzel, abt 1/2" in dia');
CREATE TABLE "SKIP"."INGRED_XREF"
   (     "PRETZEL_ID" NUMBER,
     "INGRED_ID" NUMBER
   ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
REM INSERTING into SKIP.INGRED_XREF
Insert into SKIP.INGRED_XREF (PRETZEL_ID,INGRED_ID) values (1,1);
Insert into SKIP.INGRED_XREF (PRETZEL_ID,INGRED_ID) values (1,2);
Insert into SKIP.INGRED_XREF (PRETZEL_ID,INGRED_ID) values (1,4);
Insert into SKIP.INGRED_XREF (PRETZEL_ID,INGRED_ID) values (2,2);
Insert into SKIP.INGRED_XREF (PRETZEL_ID,INGRED_ID) values (2,3);
Insert into SKIP.INGRED_XREF (PRETZEL_ID,INGRED_ID) values (2,5);
-- Constraints for Table INGRED_XREF
ALTER TABLE "SKIP"."INGRED_XREF" MODIFY ("PRETZEL_ID" NOT NULL ENABLE);
ALTER TABLE "SKIP"."INGRED_XREF" MODIFY ("INGRED_ID" NOT NULL ENABLE);
{code}
Desired output (note how the ingredients are all listed in one column, separated by commas):
{code}
PRETZEL_ID PRETZEL_NAME     PRETZEL_DESC                        INGREDIENTS
1          CLASSIC          Classic knot pretzel                SEA SALT, TABLE SALT, YEAST
2          THICK STICK      Straight pretzel, abt 1/2" in dia   TABLE_SALT, FLOUR, BEER

See the FAQ : {message:id=9360005}
Especially links concerning string aggregation.

Bug: Diff fails for multiple constraints on one column.

Similar Messages

Maybe you are looking for