Build an ID CS4 project in snow leopard/lion

Hi All,
I got a new machine with leopard(10.6.7) and xcode 3.2.5 installed
when I tried to build a sample sdk project then it starts give me error of missing base sdk 10.4u
I could change my SDK to 10.6 and GCC compiler to GCC 4.0 then it gives me error like mismatch in unsigned long int and uint32
Can anyone suggest me how I cna build CS3/CS4/CS5/CS5.5 project on snow leopard/lion
Regards,
Alam

Hello Alam,
I don't know about CS3 but I cross-compile for Mac CS4, Win CS5 and Mac CS5.
For CS4, you need the sdk Mac OS X 10.4u. For CS5, you can use the Mac OS X 10.5 SDK. I use different configurations in XCode for CS4 and CS5 within the same project.
For CS5.5, except if you want novelties from that version, your CS5 plug-in will be fully compatible.
David

Similar Messages

DW CS4 crashes in Snow Leopard

Hi
Is it me or does DW CS4 just absolutely not work in SL 10.6.1 at all. Illustrator and Photoshop seem ok.
I have managed to get it to launch previously, but not today. Is it a known issue or should I de/re-install?
Any help is appreciated before I go through the painful re-installation process.
Crash log is attached.
Regards
Craig.

Snow Leopard and CS4 are not the best of friends.
I might also recommend you visit the Apple forums, although I have not looked this topic up on that site.
I use CS4, I am not that experienced, but I have problems daily with CS4 freezing in Snow Leopard.
This is no help I'm sure, but wanted to let you know it is not your hardware, but in my opinion a conflict between Snow Leopard and CS4, whomever is responsible.
Thank you,
Dan

Is Snow Leopard/Lion simply an interface?

I happened to purchase a 64bit iMac just before Lion came out. But Xcode 4 was in my installation discs.
So is the assembler for 64bit instructions on the machine, on the Xcode discs, or on the Snow Leopard/Lion interface (if those are really just interfaces)?

You all probably know this already, but part of this might be interesting to some:
http://developer.apple.com/library/mac/#documentation/developertools/reference/a ssembler/010-Using_the_Assembler/using_asm.html#//apple_ref/doc/uid/TP30000820-T PXREF101
So there is an assembler that runs from the terminal. It comes from the GNU/GCC 'free' project, which is actually strictly controlled. I was concerned that Apple's standard of assembly code to binary was all coming from 'shareware' but the GNU/GCC is a strictly controlled project (with freedom-loving standards for participation).
So, basically, the answer is that the assembler is available through the terminal shell commands, but it is coming from the GNU/GCC project. So there is really no difference between inserting assembly language into an xCode project interface and putting the assembly code together on a more 'basic' or 'fundamental' level. The xCode interface is as fundamental as it gets, except that it's pleasant to look at and easier to use.
But it makes perfect sense for any programmer to learn the architecture of the IA-64, and learn to add assembly language in the 3-directive bundles, I think. It just provides a better understanding of the capability of the IA-64. At least that's the direction I'm going, before heading back to study the standard libraries.
I can't believe I'm at least a decade behind on this, and I'm still at least a decade ahead!

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
10.8 Mountain Lion is a download from the App Store, the price is $19.99.
Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion, or Mountain Lion (to improve speed

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion, or Mountain Lion (to improve speed)? I'm willing to purchase if necessary and it really helps.

MacBook upgrade possibilities - https://discussions.apple.com/message/19577869 - "The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion."
Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion - https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store.

Why can a person buy and/or download Snow Leopard, Lion, and Mountain Lion but not Mavericks???

I am running OS X Lion on a mid 2009 MacBook Pro with 4GB of ram and a 160GB HDD. I was going to download Mavericks from the app store but waited to long. Now that Yosemite is out Mavericks has disappeared from the app store. WHY? A person can buy and/or download Snow Leopard, Lion, and Mountain Lion but not Mavericks??? And the kicker is that it was FREE!!! I just wanted to load Mavericks on my MacBook Pro to see how it performs. If I could live with any slow downs or quirks, I'd leave it installed. If not, I'd roll my system back. Apple's policy of ramrodding unstable product down our throat is BS. I don't want to use Yosemite until it has become more stable!

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.

Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?

Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
thanks

Yes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

HT1444 can I upgrade or update OS 10 10.5.8 to snow leopard, lion and mtn lion

How can I upgrade my operating system from OSX 10.5.8 to snow leopard , lion and mtn lion

Call 1 800 MY APPLE
Ask for 10.6
Get disk, install.
Run all software updates.
App Store in the dock can then get you 10.7 or 10.8

How can I add icloud to macbook pro? Do I need to buy snow leopard & lion?

How can I add icloud to macbook pro? Do I need to buy snow leopard & lion?

Lion 10.7.2 is required for iCloud. Your computer must meet the requirements:
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.

How do i upgrade from Leopard to Snow leopard, Lion, or Mountain Lion without using the DVD?

Apparently someone mentioned if i wanted certain applications back i would havve to upgrade my software to snow leopard, Lion, or Mountin Lion. And also this also has to be under my flash players and my internet browsers say that they will not update anymore because i'm running on Leopard.
I have an intel core 2 duo processor with 2 GHz, 2 GB of memory, Space: 62.27 GB.

Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Model Eligibility for Snow Leopard and Lion.
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.

I never updated to Snow Leopard, Lion requires it.

I never updated to Snow Leopard, Lion requires it so do I have to purchase both SL and Lion?? And how do I get Snow Leopard? Thanks!

You can still buy Snow Leopard online:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA&mco=MTc1ODgwMjE
FWIW, your profile's OS version does not match your computer. iOS can only run on phones, pads and pods, not on Mac computers. My answer assumes you are currently running OS 10.5.X.
You can get help faster around here if you show your exact OS version in your profile so people don't have the ask before responding. Do "About this Mac" from your Apple menu to get your current version.
Thanks!

Will CS5 work with Max OSX Snow Leopard, Lion, and Mountain Lion?

Will CS5 work with Max OSX Snow Leopard, Lion, and Mountain Lion?

Hi,
You can check system requirement for CS5 in link : http://www.adobe.com/store/en_us/popup/software/creativesuite/mastercollection5/systemreqs .html
Regards,
Jatin Dembla

When I upgrade to Snow Leopard/Lion - after installing it are my files deleted and my preferences changed?, When I upgrade to Snow Leopard/Lion - after installing it are my files deleted and my preferences changed?

When I upgrade to Snow Leopard/Lion - after installing it are my files deleted and my preferences changed?, When I upgrade to Snow Leopard/Lion - after installing it are my files deleted and my preferences changed?

If you install those new OS X versions over the top of what you already have, your files and preferences should remain. However, it's a very good idea to have at least one complete backup of your Mac's disk before you try anything like that.

Encore CS4 can't create a project with Snow Leopard

After many crashes on a Windows XP 64Bit Dell workstation trying to render a project, I thought I would create the project from scratch on my MacBook Pro 17" with Snow Leopard installed. I get a strange string error message trying to create a new project. It goes back to the welcome screen and I try to open the project it just created. I get a second error message that the project was created with Windows and can't be opened with a Mac. Strange. Then I get a third message saying an input contract violation has occurred. I guess I'm in trouble somehow for this . I think I was successful at creating a service issue with this, but I only grabbed the first error message at that time.
I'll attach the messages here....
Rick

Sorry to say, no I have not. I was able to complete the work on my Windows XP 64Bit system.
The MacBook is my personal laptop, but I use it as backup to what I am doing on the workstation.
I was sent some info on permissions and maybe starting in safe mode. I don't know that "safe mode" exists on a Mac, and I am the only owner/user on it. Permissions should not be an issue. No time right now to do an uninstall/reinstall, but that's what I was thinking of doing.
It tells me I can't create the file, yet it appears in the folder. Then I try to open it and it says it was created with a Windows machine. Neat trick.
I just tried again, no luck.

AppleScript Studio projects under Snow Leopard

I know Apple has depreciated AppleScript Studio, but the documents say old projects can still be used, so I assume there's a way to edit my old AS projects. I have the iPhone SDK with Xcode 3.2 and Interface Builder, but it doesn't recognize my AS project files (e.g., MyProject.pbproj). How do I get Xcode to open my old AppleScript Studio project files?

The old .pbproj projects will probably need to be converted or opened in an older version of Xcode, which can be downloaded from Apple's Developer Member Site. The newer .xcodeproj AppleScript Studio projects can still be used in Snow Leopard (it is just not recommended), so if you have an existing project you can enable the AppleScript tab in Interface Builder - see the AppleScriptObjC Release Notes.

Build an ID CS4 project in snow leopard/lion

Similar Messages

Maybe you are looking for