Build Array keeps name of the last element but not the others. Workaround?

Hi there,
Sorry if this has been posted before, I did the search first but did not find anything.
Problem is that I have two setups that are identical and need to be controlled from a single vi. Since they are the same they are configured with the same sets of parameters so I decided to create a cluster of these and then build an array of the clusters. This way I need to only use one wire and if I need a given parameter I can easily get it from there (or so I thought) and also since I need to see if anything changes I can compare one wire instead of each one of the parameters.
The gui has the list of parameters then in the block diagram I bundle them appropiately, using "Bundle by Name" and then each bundle into an array using "Build Array". Problem arises when I index the array for the first setup and the use that to unbundle the parameters I need, using "Unbundle by Name" (though if I use "Unbundle" the same happens)and lo and behol, the ouput names are from the second setup, not the first.
Here is the curious thing though, even though the names are all wrong the values are correct. I could live with this but it is annoying plus it will make another user very hard to understand the diagram plus this is just a proof of principle to test with two, eventually there will be eight or even more and that is going to get really confusing.
Is there a way around this? Even if it is to change the names after unbundled.
Check the attached vi to see what I mean.
Solved!
Go to Solution.
Attachments:
Test Build Array Names.vi ‏11 KB

I think you are forgetting an important point about arrays. The only thing that can be different between each element of an array is its value. The array elements must all share the same properties. So that would include the names of the individual elements that make up the cluster that is an array element.
It appears that the last cluster that gets built into the array is the one that defines the names of the elements that are within the cluster element. You either need to give all elements of the array the same names within the cluster. Or use a cluster of clusters instead of an array of cluster to build your data structure.

Similar Messages

HT203164 I used to be able to print labels for burned CDs with the cover being the playlist name and the other side the song titles...now the titles print out compacted, overlapping each other and illegible. I thought it was the printer but it happened w/

I used to be able to print labels for burned CDs with the cover being the playlist name and the other side the song titles...now the titles print out compacted, overlapping each other and illegible. I thought it was the printer but it happened w/1 other printer as well, which I used before for this exact thing w/no problem.

Try cleaning the print head with rubbing alcohol wipe, then replace your print head. Keep pushing the Ok.
Go to this link and HP shows you how.
support.hp.com/us-en/document/c01643079
Lucky for me it worked!

The calendar typeface is so dim, I can barely read it. Name of days and date, but not the items I put in. Apple says they have no fix. Anyone else have this problem? Any solutions?

The calendar typeface is so dim, I can barely read it. Name of days and date, but not the items I put in. Apple says they have no fix. Anyone else have this problem? Any solutions?

I agree and I found your post because I did a google search ical typeface dim.
If I find anything out, I will post back here.

Unity cluster with one node using name and the other using iP

Hey Guys,
I have two unity connection boxes setup in a cluster, one is know by name and the other by IP address. I'd like to change so that both are using the IP address. The node in the cluster that is using the node name is the publisher. Can I simply go into the cluster settings and change that to an IP address or will that cause big issues.
Thanks,
BR

Hi Brent,
Is there any specific reason why you would want to do this kind of configuration? (Just Curious to know)
I tried doing the same on my Unity Connection cluster (version 8.5(1) SU2 ) in lab.
After making the change in the cluster settings page for the Pub , I did the following :
1)Switch the Primary Role back and forth between the Pub and the Sub : SUCCESS
2)Checked the service status on the pub and sub using "utils service list" : ALL GOOD
3)Rebooted the Pub followed by the Sub and performed test 1 and 2 again : SUCCESS
4)Checked the output of "show cuc cluster status" on the Pub and Sub again: SUCCESS
However, I could not find any document that says this change is really required under any circumstances.
I hope that helps!!!
Regards,
Saurabh Agnihotri

How does the ask-to-buy notification determine which organizer's device to send it to? I keep receiving notifications on my ipad but not my iphone. my ipad does not have a data plan so if i'm not on wireless, i don't receive any notifications.

How does the Family Share ask-to-buy notification determine which organizer's device to send it to? I keep receiving notifications on my iPad, but not on my iPhone. My iPad does not have a data plan so if I'm not on wireless, I don't receive any notifications.

Did you ever receive a solution for this issue?

Any way to keep apps on my ipod touch but not keep copies of them on my PC?

Is there any way to keep apps on my ipod touch but not keep copies of them on my PC? I have space issues on my PC, so I don't want to have to keep copies there. I deleted the apps from my PC, but when I synced my ipod to add some photos, all my apps were deleted from my ipod. Is there any way to be able to just sync photos and music, and not apps? Seems I am able to manually manage music, which allows me to not have to keep my music library stored on my PC, but can't get the photos to sync without the apps syncing too.
Any help here would be greatly appreciated. I'm new at this.
Thanks.

marcy5 wrote:
Is there any way to keep apps on my ipod touch but not keep copies of them on my PC?
though purchased apps can be re-downloaded for free, i strongly advise against such a practice !
I have space issues on my PC
you would be better off to move your iTunes library to an external drive, thus freeing up space on your startup disk. this read will tell you how http://support.apple.com/kb/HT1364.

Why is my iPhoto library greyed out in the Screensaver folder selection dialog on one iMac but not my other?

Why is my iPhoto library greyed out in the Screensaver folder selection dialog on one iMac but not my other?

I have an update to my issue above, with a Semi-solution found. I brought my Macbook Air back to the Genus bar today and they were able to identify (using “Activity Monitor”) that when the particular iPhoto library was being launched through iPhoto both Photostream and iPhoto's CPU% usage was excessively high (between 100% - 200% each). She discovered that if we turn off Photostream in iCloud settings iPhoto then behaved fast and snappy and CPU% came back down to a healthier level. When we turned Photostream back on the problem continued. After an hour of trying to trouble shoot why Photostream was causing the issue they recommended I keep Photostream turned off until a future software update/fix comes out. The particular Genus I worked with was not familiar with this issue. I’m very happy to at least be able to use iPhoto again, but if anyone has ideas or theories on how the Photostream conflict can be fixed please share. Thanks.

I just uploaded lots of pictures. They are only showing under last import but not in events. how do I get them to show up under events?

I just uploaded lots of pictures. They are only showing under last import but not in events. how do I get them to show up under events?

Read this: http://help.apple.com/iphoto/#pht211dc8fc

TS3899 How can I change server info it keeps saying incorrect username and password but not and the server is written smtpaol several times and I cannot change that what does that mean?

My apple I pad mail app will not let me send mail I can receive it but it keeps saying username or password wrong but its
Not, because I can send mail thru a Internet site.
It also has smptaol over and over as server and I cannot erase that. I do not know what to do to just make it aol.com
Any suggestions?

The outgoing mail server should be smtp.aol.com. This is the correct server setting. Try using another server under Other Server. Turn the Primary Server Off and use another server under Other SMTP Servers.

Photos show in "Last Roll" but not in "Library" - why??

I recently uploaded to the library a file from my desktop that contained pictures from two different cameras - 108 pictures in all. The upload was successful, but one set of the pictures doesn't show in my Library, even though the total number of pictures says 108.
However, when I view Last Roll, all 108 pictures are there, so obviously they all must have uploaded to iPhoto. Why aren't they showing up in Library?
Any help or suggestions would be much appreciated!

TSP33:
Welcome to the Apple Discussions. Go into the Photos window with Roll Names selected to display and type in one of the file names in the search window at the bottom right. The event and the photo will be displayed in the window.
Happy Holidays
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Integration builder config obj transported from DEV to QA but not found

Hi,
I have a new development in PI DEV. I exported the ESR objects in a transport as well the Integration builder config objects in the same transport. Asked my admin to move it through CTS to PI QA. Its done.
In PI QA system, I am able to see the new ESR objects in the Enterprise services Builder.
But not able to see the config objects in Integration Directory (Integration Builder).
I researched the forum got some tips tried but in vain.
1. I chose Tools menu --> Find transports option but no transports found.
2. I cleared cache (full refresh)
3. Closed and reopened Integration builder
I just want to see those config folders as it was designed in the dev !!
Help is appreciated please.
thnks

Hi!
Yes , you can transport the ID Objects through CTS, But the catch is : -
After transport ID Objects, will not directly come into ID object list Like ESR Object Did , here in ID transported Object first Move into Change Object list , There you need to acticate Them. then these Object will be appear in ID Object List,
Method CONFIGURATION OBJECTS ---> (INTEGRATION DIRECTORY) -
> INTEGRATION BUILDER.
Step -I
1. Select Configuration Scenario to trasport.
2. Right Click on Configuration Scenario to Transport.
3. Select Export Option.
4. Check or Select the Configuration Scenario.
5. Check the Mode of transport.
CTS MOde:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF Selected Scenario.
5.2        Select Transort request.
5.3      Finish the Process.
TRANSPORT USING FILE SYSTEM:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF Selected Scenario.
5.2      Finish the Process.
Step II
1. GO TO TOOLS OPTION IN MENU BAR
2. OPEN CTS TRANSPORT ORGANIZER
3. Select the request to Release.
4. Press Button Release.
Step III( Steps to be Perform at Target System).
1. Execute Transection Code STMS.
2. Check your Transport Request Number.
3. Focus on that Trasport Request Number Through Mouse.
4. Now Import The Transport Request on Specific client of Target System.
5.Click Ok.
FINAL :- NOw on Quality Server all Transported Objects Need to be activated( CHANGE OBJECTS).
Regards
Prabhat Sharma.

Xml Disassembler Promotes Elements, but not Attributes

I have a strange issue. I am polling xml from SQL Server and debatching it on the Receive Port. Each of the debatched messages has an attribute on the root node that I wish to promote into context for routing (MessageDataPropertyBase). When I run the receive
location, the messages are debatched and I see the attribute in the message context, but it does not get promoted.
I used this exact same method in another application and it worked just fine. However, the difference is that the other application is promoting an element field, not an attribute field. So, to test it out I changed my message to include an element with
my value, and changed my promoted field in the document schema to use the element instead of the attribute and VOILA! It promotes just as I would expect.
One other test - I dropped a single message on the same port that did not need to be debatching and the attribute promoted exactly as I want. It only does not promote after being disassembled. I tried configuring the XML Disassembler both with and without
a document schema specified (giving the envelope schema in both cases) and it made no difference.
So here's the question...why will the XML Disassembler promote Element fields, but not Attribute fields?

I just tried an example on BizTalk Server 2013, where I debatch my Orders and promote 3 Propeties on each Order (MessageID, ReceiverID and Total).
In my example it works and all 3 Properties are promoted to context on each message.
All 3 Properties in the Property Schema has the default "Property Schema Base" property "MessageDataPropertyBase".
So the short answer is: yes it will promote attributes, but clearly it doesn't work for you, so either you are doing something different than me and/or using another version of BizTalk than 2013?
Morten la Cour

Photos are appearing in Last Import but not in Last 12 months

When I import photos from my camera into iPhoto they appear under "Events" and "Last Import" but no under Last 12 months. Is there a way to correct this?
David

What are the dates of the photos? Last "n" months is a list of photos taken in the last "n" months irrespective of when they were mported. Typically your question is due to incorrect camera dates
There was another similar report recently
LN

Artist/album names missing when adding folder (but not all of them)

Yesterday I found iTunes couldn't locate the folder where I store MP3 downloads - ie. I got the dreaded '!' alongside most tracks. When I used the Add Folder command I ended up getting a duplicate of virtually every track.
However most of the duplicate tracks were only shown with the track number on the original album plus about 12-15 characters from the title (ie. character string used as a label for the MP3 file). There was no detail of the artist or album.
Given the large number of duplicates involved I decided to clear out the library and have just used Add Folder. Same outcome - 1/3rd of the tracks described in full; the other 2/3rds just show track number and some of the title.
Suggestions on (a) where I'm going wrong; and (b) whether I can use contents in the Previous iTunes library folder to recreate the library would be greatly appreciated. Many thanks.

As I've already said this question has been answered maybe no one is monitoring this topic but ... I've just worked out the reason the detail is missing is because the tracks which have limited detail are in WAV format.
This is where I am completely lost because they have all been downloaded from the iTunes store or from Amazon as MP3 files, and I'm not aware either of the download functions comes with an add-on called "automatically convert to WAV".
The irony is that this is quite convenient but if anyone can provide an explanation of how it is occurring then I would be interested to hear because I can't figure it out. May still trust my sanity, but not my memory!

Indesign file re-open causes freeze/hang - but not on other Macs in the studio

Hi,
I'm running Leopard 10.5.6 and Indesign CS3 5.0.4, as are the other 4 Macs in our studio.
I created a document on my machine, saved it to the network and have now come to edit it again; the machine freezes every time now when I try to open the file.
The file opens perfectly on any of the other machines in the studio. I have tried resaving, copying/pasting content to a new document, saving as an Exchange format and nothing seems to work.
I've run Onyx system tools, cleanded the caches etc, even verified Hard disk and Permissions using Mac OS installer CD.
All other indesign files I have tried to open using my Mac are fine, open with no problems.
Does anyone have any idea what's going on here? I can post the report Mac OS generates if that would help anyone.
Thanks in advance,
Roland Kasicki

quicktime is a program not a format
even .mov is not a format but a container which can contain a vide range of formats
the core of your problem is finding out what the format of your files are
and if they are on the list of supported formats
if they are not you will have to convert your media
http://www.apple.com/appletv/specs.html
converting them should not reduce quality at all

Build Array keeps name of the last element but not the others. Workaround?

Similar Messages

Maybe you are looking for