Built my desktop and tablet site in Muse. Desktop works fine, tablet version does not redirect when viewed on iPad.

Do I have to upload the tablet version separately or does Muse 'see' the new tablet version as changed content?
Either way, I need help since my iPad version goes to the desktop version regardless.

Hello,
Please make sure "Redirect from desktop" is checked in site properties for tablet. you can find this from File > Site Properties > layout > Tablet.
Please look at the screenshot as well.
Once the option is checked re-upload the site and then check on iPad. Please share the site URL if the issue still persist.
Regards
Vivek

Similar Messages

  • I have been trying to download a new update and it goes thru the strokes and restarts but the update version does not show when I go to "about this computer" to see what version is on.  Any ideas what is wrong?

    I have been trying to download an update on my MacBook Air and it goes thru the process and restarts but the update does not load.  I know it is not loading because when I go to " About this computer" the version does not show it updated.  Any help would be appreciated.  Thanks

    trying to download an update
    v10.6.8 is as far as Snow Leopard can be updated.
    Which update are you trying to install ??

  • HT1414 Have a new computer with Windows 8. itunes is accessible and seem to work fine. It does not recognize my ipod and I cannot sync

    Unable to see my iPod  in i Tunes. New computer with Windows 8. How to make it work as it certaninly is not automated of seamless and more than likely an itunes issue

    First:
    iOS: Device not recognized in iTunes for Windows
    The when iTunes see the iPod do the following to make this your new synicing computer:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • I have an older airport express and my computer states that the air port utility version does not support it.  Do I need to download an update?  My Imac is from SEP of last year, the version with the optical drive

    I have an older airport express.  My airport utilities states that it does not support this base station.  I am try ing to use the airport express in conjunction with a base station to air play my itunes library in another room.  I have mountain lion on my Imac (purchased new in SEP of last year.  My Imac was the last issued with an internal dvd drive.

    Unfortunately, Apple discontinued support of the older AirPort base stations with the introduction of Lion and Mountain Lion.
    You might be able to use a somewhat complicated workaround.....not supported by Apple.....if you want to try to use the older AirPort Express.
    See this thread for details:
    https://discussions.apple.com/message/21397085#21397085
    More background info here:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • Bug when opening and saving site in muse.

    On several occasions, when I launch Muse, it bypasses the welcome screen and goes directly to an open site. I've notice that both the 'Save' and 'Save As' options in the file menu are active as if I had made changes to the site.  When I click on 'Save' to save my updates, the 'Save As' dialog box opens. I have inadvertently saved a duplicate version of the site to a different location because 'Save As' does not default to the original location when this happens (opening directly to site). The last time this happened was this morning.  The last thing I did in Muse was last night  - I opened Muse normally > tried something that I ended up not wanting to keep > then closed muse > when prompted, I clicked 'Don't Save'.
    Are you aware of this bug? Has anyone else had the same problem? Am I possibly doing something wrong (I'm not doing anything differently other than not saving when I exit)?

    I have never experienced this bug. Have you tried uninstalling and then reinstalling Muse? This may fix the problem you are experiencing.

  • Muse tablet version does not cover the full screen

    I created a website and it shows well on desktop and mobile versions.  However, the tablet version does not horizontally cover the entire screen.

    Most commonly this is caused by content that's off the right side of the page. Phone and Tablet browsers zoom so the content (not just the page) fit in the width of the device. Use Select All in Design view in Muse to look for items off the right of the page (or the applied master page).

  • I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4.  However, I cannot record voice memos with my Bluetooth mic.

    I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine.  I can also use voice activated dialing, although it fails miserably interpreting numbers.  However, I cannot record voice memos with my Bluetooth mic.   I just get barely audible static.  Any suggestions?   Thanks.

    Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
    Thanks!

  • I have a iMac desktop and a macbook pro laptop I work mainly on the desktop but when i go away for work I take my laptop. Is there any way to make it automatically back up to mirror my desktop? Like when I update a file it updates on there too etc?

    I have a iMac desktop and a macbook pro laptop I work mainly on the desktop but when i go away for work I take my laptop. Is there any way to make it automatically back up to mirror my desktop? Like when I update a file it updates on there too, if I install software it installs on there too etc?
    When I first got the laptop I syned it to load with all the same software etc but it hasn't continued to sync
    Thanks

    I use
    Chronosync (http://www.econtechnologies.com/pages/cs/chrono_overview.html)
    and
    Dropbox (https://www.dropbox.com/)
    Both work very well. The former I use for manual, one-way synchroniziation of (nearly) entire systems. The latter for automatic syncing of very active directories through local and shared online storage.

  • The navigation menu does not appear when published to folder and my 12 photos are not on the site either

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John
    Message was edited by: BOURBAH

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • The navigation menu does not appear when published to folder and my 12 photos arenot on the site eitherr

    The navigation menu does not appear when published to a file.  My 12 photos are also absent as well, just as if they wernt added.
    I have tried rebuilding the site but the same problem appears.  Everything else seems perfect up to tha publidhed file.
    Has anyone had the same problem,
    John

    Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

  • When I open a link in gmail the website opens as a completely black page and when I click anywhere in the page the whole thing turns white and there is nothing showing. This does not happen when I open the same link in IE

    When I click on a link in gmail it will open the website as a black page. When I click anywhere on the page it turns completely white with nothing there. This does not happen when I open the same link in IE
    == URL of affected sites ==
    http://all

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

    Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

    My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
    See Here: http://pondini.org/TM/1.html
    And here: http://pondini.org/TM/9.html
    Peruse the whole site. There is a lot of information there.

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

  • HT204347 My MacBook Pro shut of three times yesterday after plugging my phone in but I managed to switch it back on each time. I left it to rest for about 20 hours and then today it Has been working fine

    My MacBook Pro shut off three times yesterday after plugging my phone in but I managed to switch it back on each time. I left it to rest for about 20 hours and then today it Has been working fine all morning. Using indesign and Skype which usually slow it down anyway but it's been fine. Then I plugged my iPhone 4S into it and it just shut off again. But this time it won't switch back on. No idea why this has happened but I hadn't saved my work either. I'd not long plugged the charger in to it but now, it's still plugged in, but the light on it is very dim and is just flashing.
    No idea what to do. Please help!

    You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
    Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
    http://roaringapps.com/apps:table
    Far as your Safari problem do these things until it's resolved:
    1: Software Update fully under the Apple menu.
    2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
    https://www.mozilla.org/en-US/plugincheck/
    Flash install instructions/problem resolution here if you need it.
    How to install Flash, fix problems
    3: Install Safari again from Apple's web site
    https://www.apple.com/safari/
    4: Run through this list of fixes, stopping with #16 and report back before doing #17
    Step by Step to fix your Mac

  • Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

    I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

    Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
    Thank You!
    I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
    BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
    Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
    Incidentally, whats up with all of the Java Console Add Ons?
    I have:
    Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
    Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
    What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
    Also, .NET Framework 0.0.0 Should I uninstall it?

Maybe you are looking for