Bulk load messages into the language repository?

Hi,
Our existing, pre-APEX, applications make use of a common table of 'messages' to provide multiple language support e.g. we have a lookup against message number and language to produce the required message.
This seems very similar to the functionality supplied through the apex_lang message repository. Is there an easy way in which we can load a modified version of our current messages into the repository without having to enter them in manually?
Thanks,
Andy

Arie Geller wrote:
Hello Andy,
>> I'm slightly(!) confused. Are you advocating using the wwv_flow_api.create_message API or manual entry? The link that you posted refers to the API as a method of message entry, I don't see a reference to exporting messages from an existing application?
Let’s go back to the beginning. As I understood, you first asked whether you can use some existing translation tables, to automatically populate the APEX translation repository. My answer was ‘no’ and I don’t think Flavio suggestions contradict it.Understood, in 'my' head the ability to create a script that would pick up my existing messages and use the 'create_message' API to load them into APEX was close enough to automatic for me! My intention is that our first move from legacy to APEX messaging would be to do this to create the base messages, and that we would consider translation later... (In some cases, I could use our existing multi-language messages to produce both the primary language and the translated messages).
Is my position more clear now? I hope so :)Thanks, much clearer, however the final step - once we have a set of base/primary and translated messages, how do we make use of them in a later application?

Similar Messages

Bulk load users into Directory and Messaging at the same time

Can I bulk load users into Directory and Messaging at the same
time?
<P>
Yes, but you are not really loading users into the Messaging
Server. The Directory Server contains all kinds of information about
users, including information about their email. So if you want to
load user information into the Directory Server, including the users'
messaging infromation, you must install the Directory server first.
Configure the directory server. Then install the Messaging Server.
Then you can load users into both by loading an LDIF file with the
user information.

Hi,
You can check the documentation: Multiple Copies of RMAN Backups ;-)
When backing up datafiles, archived redo log files, server parameter files and control files into backup pieces, RMAN can duplex the backup set, producing up to four identical copies of each backup piece in the backup set on different backup destinations with one BACKUP command. (Note that duplexing is not supported for backup operations that produce image copies.)
There are three ways to specify duplexing of backup sets when using the BACKUP command:
Specify a default level of duplexing with CONFIGURE... BACKUP COPIESAll backup commands that back up data into backup sets will be affected if you use this option, unless you specify different duplexing options for a command using SET BACKUP COPIES or provide a COPIES option for the BACKUP command.
Use SET BACKUP COPIES in a RUN block All commands in the RUN block will be affected, overriding any CONFIGURE... BACKUPCOPIES setting, except those where you provide a COPIES option as part of the BACKUP command.
Provide a COPIES option to the BACKUP command For this specific BACKUP command, files will be duplexed to produce the number of copies you specify.
Cheers
Legatti

Errors "Load tModels into the registry" option & publishing proxy services

Hi,
I'm making a study with BEA Aqualogic Service Bus and BEA Aqualogic Service Registry.
Reading official documentation (Console Help), I added with the BEA ALSB Console two registries. But during the configuration it doesn't allow me to set the *"Load tModels into the registry"* option, in fact when I click "Save" I get this error:
*"Permission to generate key uddi:bea.com:servicebus:servicetype denied".*
However I added two registries without setting this option.
Now, when I want to publish a proxy service (in any registry), following the official procedure, I get this error:
*"The publish completed with error. One or more services can't be published correctly, please see the detailed error messages in the summary table".*
*"CannotCreate The key uddi:bea.com:servicebus:properties does not represent a valid taxonomy!"*
I don't think it's all right! :)
Someone can help me?

Thank you for your help (even though you didn't know you were helping). I am also studying ALSB and ALSR, and I had the same problem when I tried to publish a proxy service ("... does not represent a valid taxonomy"). Based on your experience, I updated my registry in ALSB and checked "Load tModels". This was successful. I then published my proxy service and this too was successful.
So the help you've given me was to suggest that publishing proxy services cannot be done unless the BEA tModels are first loaded into the registry.
This means that your real problem is that you can't load the tModels. To do this, I suggest that the user ID you give when you're setting up the registry in ALSB must be an administrative user. When you installed the ALSR, an administrative account was created. Try giving this account information to the ALSB.
If you don't want to give the administrative ID and password, you must set up an account in ALSR that has the ability to create tModels. In the ALSR's console page (probably at http://localhost:7001/registry/uddi/web), look at the administrative account's permissions (you'll find it on the "Manage" tab, under "Permissions"--you won't see the "Manage" tab unless you log in as an administrator). In my system, the administrator account has four permissions; I would guess that the one you need is "org.systinet.uddi.security.permission.ConfigurationManagerPermission".

What can I do to get back to a point that I can directly purchase Apps from my itouch via wi-fi. I was able to before I purchased an app on my PC and loaded it into the device via the sync cable.

What can I do to get back to a point that I can directly purchase Apps from my itouch via wi-fi. I was able to before I purchased an app on my PC and loaded it into the device via the sync cable. My itouch 2G was bought 2nd hand, so when trying to get Apple support I was unable to register my device because I didn't know it's original purchase date. Note: I am still able to download the apps to my computer and load/sync them into the device.

Why can you not buy from the ipod?
What happens when you try?
Error message?
What does it say?
Any info?

How do you load products into the catalog?

Instead of using the automatic or manual load processes by hand for the product catalog, we would like to have a batch program written where it will automatically load products into the specific levels of the catalog. Does anyone know if there is a standard program in CRM to accomplish this?
Thanks,
Darcie

Hi Darcie,
No, as far as I know there's no load standard load program for CRM product catalog data. We're on v4.0, so I can't say what's been added in later releases.
Anyway, if you write your own, have a look at package COM_PRDCAT_WEB_API which contains lots of goodie function modules you can use to manipulate product catalog data.
Dont forget
CALL FUNCTION 'COM_PRDCAT_TRANSACTION_BEGIN'
at the start and
CALL FUNCTION 'COM_PRDCAT_TRANSACTION_COMMIT'
at the end.
There's also package COM_PRDCAT, but when we tried to do stuff with FMs in this package we ran into errors since some global variables were undefined.
Hope this helps.
Regards,
Rasmus

TS3899 How do you fix a gmail account on an iPhone 4G that stops downloading messages into the InBox?

How do you fix a gmail account on an iPhone 4G that stops downloading messages into the InBox? My gmail gave me a notice that said imap.gmail.com is not responding. Can send emails out but cannot download new messages into Inbox.

Hi! So I finally found a disk cleaning kit and tried it out. No luck : (
The exact thing that occurs is:
Put disk in. It does not show up. Cannot get it out.
Turn computer on and off.
Message comes up saying it cannot read the disk and if I would like to erase the disk or eject it.
Then I eject it.
That's the whole of the cycle.
So do you think that just means it;s busted and no other way I can solve it but go with the external drive at this point?
I appreciate the help.

Encode a message into the picture

Hi,
regarding the subject above, i know how to encode a static message (which mean predefined the message) into a picture..
But when it come to the dynamic message (user can enter message), i really no idea on how to encode it in the picture..
example for how i encode it for static msg :
predefined msg = "ON"
O = 79 = 01 00 11 11 c1, c2, c3, c4
N = 78 = 01 00 11 10 d1, d2, d3, d4
//0xFC = 1111 1100 <-- used this to remove the last 2 bits
int c1=1, c2=0, c3=3, c4=3;               //O
int d1=1, d2=0, d3=3, d4=2;               //N
int alpha, red, green, blue;
//unpack the individual pixel n process
alpha     = (pixels[1]>>24) & 0xFF;
red     = ((pixels[1]>>16) & 0xFC) + c1;
green     = ((pixels[1]>>8) & 0xFC) + c2;
blue     = (pixels[1] & 0xFC)     + c3;
//repack the pixels
pixels[1] = (alpha<<24) | (red<<16) | (green<<8) | blue;
//unpack the individual pixel n process
alpha     = (pixels[2]>>24) & 0xFF;
red     = ((pixels[2]>>16) & 0xFC) + c4;
green     = ((pixels[2]>>8) & 0xFC) + d1;
blue     = (pixels[2] & 0xFC)     + d2;
//repack the pixels
pixels[2] = (alpha<<24) | (red<<16) | (green<<8) | blue;
//unpack the individual pixel n process
alpha     = (pixels[3]>>24) & 0xFF;
red     = ((pixels[3]>>16) & 0xFC) + d3;
green     = ((pixels[3]>>8) & 0xFC) + d4;
blue     = (pixels[3] & 0xFC); // no use.... finish used all the bits
//repack the pixels
pixels[3] = (alpha<<24) | (red<<16) | (green<<8) | blue;
But when came to dynamic msg.. i really no idea on how to continue..
when i get everything ready.. (the msg length, each char value) in the for loop..
for(int j=0; j<length; j++){
msg[j] = message.charAt(j);
value[j] = (int) msg[j];
//this is to get the binary no.
c1= (value[j]>>6) & 0x03;
c2= (value[j]>>4) & 0x03;
c3= (value[j]>>2) & 0x03;
c4= value[j] & 0x03;
Encode(); //call a method to encode the msg into the picture
wanted to encode it in the picture..
but the requirement is encode only in the RGB and not alpha..
so when i get the value (O = 01 00 11 11)
c1 = 1 c2 =0 c3=3 c4=3
alpha     = (pixels[1]>>24) & 0xFF;
red     = ((pixels[1]>>16) & 0xFC) + c1;
green     = ((pixels[1]>>8) & 0xFC) + c2;
blue     = (pixels[1] & 0xFC)     + c3;
pixels[1] = (alpha<<24) | (red<<16) | (green<<8) | blue;
but the c4 is not encoded yet... so how ?? what should i do in this method ? because after processing this, it should go back to the for loop to continue the next char.
c1,c2,c3,c4 will be initialized with the new value again...
As you can see in the static example, c4 is used in the pixels[2]... then continue with the next char's 1st 4 bit (d1,d2)..
d3 & d4 is used in the pixels[3]...
err.. hope you can understand my question and give me some ideas on "encoding a message into the picture"
thanks and appreciate every single idea & help ;)

Take a look in the indesign-server-plugin-techniques.pdf in the section on MessageLog for more info.
Something interesting is that code that calls CAlert methods get converted into MessageLogs.
Your use of the word "console" makes me think that you are coding for Mac. If that's the case you could create some Mac code and use NSLog to dump to console.
Create a MyLog.mm file with something like:
#import <Foundation/Foundation.h>
void MyLogMessage(char *msg)
NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
NSLog(@"%s", msg);
[pool release];
Remember to add the Foundation framework to your project, and change the compile option from compile all files as C++ to compile according type.

Limitations of trial version 13? I cannot load pictures into the photomerge panorama window either from' browse' or 'add open files'.

On Adobe's web site it states the trial version has all functionality. FAQ, common questions & answers | Adobe Photoshop Elements 13 "These trial versions are fully functional, so every feature and aspect of the product is available for you to test-drive. Product trials can easily be converted for unrestricted use without the necessity to reinstall the software in most cases."
However, I cannot load pictures into the photomerge panorama window either from' browse' or 'add open files'. When I select either way nothing happens.This happens if I enter panorama from photo editor and/or organizer.
Can anybody enlighten me about this?
Thanks,
Barry

It seems your Samba is denying access to these files & dirs. My best guess would be that either the Samba user is not allowed to write (and read) those (in which case you'd have to modify the permissions accordingly) or Samba sets, when the share is mounted, the permissions such that your user is not allowed to read and write (you may in this case try to just set permissions for you to allow you what you want to do; or use "create mask" or "directory mask" or "writable" in your samba config. ).
Also, what do the logs say about this? According to your samba conf they are in /var/log/samba/%m.log where %m is the hostname or IP.

Steps for loading data into the infocube in BI7, with dso in between

Dear All,
I am loading data into the infocube in BI7, with dso in between. By data flow looks like....
Top to bottom:
InfoCube (Customized)
Transformation
DSO (Customized)
Transformation
DataSource (Customized).
The mapping and everything else looks fine and data is also seen in the cube on the FULL Load.
But due to some minor error (i guess), i am unable to see the DELTA data in DSO, although it is loaded in DataSource through process chains.
Kindly advise me, where did i miss.
OR .. Step by step instructions for loading data into the infocube in BI7, with dso in between would be really helpful.
Regards,

Hi,
my first impulse would be to check if the DSO is set to "direct update". In this case there is no Delta possible, because the Change log is not maintained.
My second thought would be to check the DTP moving data between the DSO and the target cube. If this is set to full, you will not get a delta. It is only possible to create one DTP. So if you created one in FULL mode you can't switch to Delta. Just create the DTP in Delta mode.
Hope this helps.
Kind regards,
Jürgen

My ipod nano 6th gen. is connected to my MacBook. I have an audio book on the MacBook in Itunes, and cannot load it into the Ipod. What am I doing wrong?

My ipod nano 6th gen. is connected to my MacBook. I have an audio book on the MacBook in Itunes, and cannot load it into the Ipod. What am I doing wrong?

Is this audiobook configured to sync to your iPod via it's Books configuration pane in iTunes? Click on your iPod's device name under Devices in the left hand pane of iTunes. This will bring you to the Summary tab. Look for the Books tab along the top and click on it.
B-rock

No response when trying to Importing Metadata into the DAC Repository

Hello,
I just installed OBIEE and OBIAPP as well as Informatica and am now trying to login to DAC client to import metadata into the DAC repository. So Tools->DAC Repository Management>Import. After I checked Universal and Siebel 8.0 and clicked OK button, there is nothing happening. I can actually still click on the Cancel button to close the Import window.
Has anyone experienced this before? Really appreciate some help here.
Thanks,
Harry

I have exactly same problem. did you manage to solve it?

Why does my Apple Mail insert old messages into the body of new emails?

Why does my Apple Mail insert old messages into the body of new emails? The correct sender's name will appear in the "From" column, but an old message from a different sender in the body. This happens randomly. I have an iMac OSX 10.6.8. I recently had the hard drive cleaned, but Apple Mail seemed to be running fine when I set it up again. Could this be a virus? What should I do about it? Thanks for any insights!

Thanks. While you were replying to my question, I went into notifications and figured
it out. Appreciate the quick response!

Can not load data into the ods.

When I was trying to load data into BW3.5 from R3 system, I am getting this message
"For InfoSource ZSD_A507_011, there is no Hierarchies for master data in source system R3PCLNT300
" any idea. There is no hierarchies for this.

Hello Mat,
What are you trying to load??
If the data source is a hierarchy datasource??
just check this thread
There are no hierarchies for this InfoSource in source system
Thanks
Ajeet

Loading samples into the exs24 ???

does anyone know how i go about loading in a load of .wav samples into the EXS24 sampler?
i have quite a few vocal samples i want to play around with but cant find how to get them in there.
many thanks for any help

Open the EXS Instrument editor. Select New - Instrument.
Select "Add" or "Add Multiple". Select the samples you want to add.
Decide on where you want them to appear/mapping etc. Save the instrument to your Sampler Instruments directory. Load that instrument in the EXS24. Enjoy. Read the EXS24 manual.
Message was edited by: Bee Jay

How can i translate hardcoded messages into particular language

actually i have a requirement that is
i have one business object *ZZbus2121*
in that business object i have some hard coded messages...like "hello"
so i need to change those messages into korean,japanese,chinese simplified and chinese traditional
please help me if u know the process.......

Hello,
Message which is hard coded cannot be translated automatically.
You can try the code as shown below, but you need the help of a translator or you should know the languages in which you want to give the message or use google translator
IF SY-LANGU = 'EN'.
Message in English.
ELSEIF SY-LANGU = 'ZH'.
Message in Chinese.
ELSEIF SY-LANGU = 'KO'.
Message in Korean.
ENDIF.
or
PARAMETERS : LANGU TYPE LAISO.
IF LANGU = 'EN'.
Message in English.
ELSEIF LANGU = 'ZH'.
Message in Chinese.
ELSEIF LANGU = 'KO'.
Message in Korean.
ENDIF.
or else go for SE63 to translate the messages
Edited by: dnr_varma on Aug 8, 2011 1:28 PM

Bulk load messages into the language repository?

Similar Messages

Maybe you are looking for