Bundle search by display name

I'm using ZCM bundle in Israel and my Display name of the bundles are in Hebrew but the bundle name is in English.
Is there a way the search bundle by display name ?
Eyal

Anders Gustafsson wrote:
> Not at this point, but you can get that info through ZRS (Reporting
> Services). Does not hurt to add an enhancement request though, Please
> visit the link below in my signature to do so.
>
I have an annoying but useful data gathering process -- I dump out all the
bundle info to XML files (the process automatically puts the data into a folder
structure following that in ZCC) and then use FINDSTR to locate any bundles
having a given reference.
It's hokey but it has saved me huge headaches at times, like when we had to
switch all the assigned folder-rights changes in actions from "Domain Users" to
"Authenticated Users".
This is from ~2000 bundles, so checking each one via ZCC would be impossible.

Similar Messages

  • Why can't I search/filter on display names?

    See Question. Yes, it's 'display names', so I guess you can only see them on the display while thunderbird pretends to not know them really.
    Still this is a less useful non-feature which annoys me a lot.

    Display name:
    is useful in identifying emails from specific people like family and friends.
    It is more informal.
    The shortened format means the 'From' column header does not need to be so wide - especially if these emails have been filtered to suitable folders.
    for example: it is more user friendly to see FROM Mum instead of the long email address and many peopke do not always send emails showing their name.
    However, like many things, you are not obligued to use it in the contact properties.
    Regarding searching:
    It depends upon how you are doing it. there are different search methods and each will search in a slightly different way.
    If using 'Quick Filter Bar' then it does not search on Display name as those options are not available. It searches on Sender , Recipient, Subject and Body. But if the display name happens to be used in the body content then it will display.
    If using global search then it does search on a display name.
    Enter the display name in the search eg: Mum and select the Mum and email address option from the drop down offered.
    It will show display name and email address, so you can select the search parameters.
    If using this method:
    Edit > Find > Search messages
    This method searches on specific fields/headers and therefore will not search on a display name.
    So I would recommend you try using the global search option if searching by a specific display name.

  • Cannot search EAC by Display Name - Must search by Alias

    My company is slowly migrating users from E2k7 to E2k13.
    We have noticed on several occasions that room resources that are on E2k13 can only be found in EAC when we search by their Alias. We absolutely cannot search by a display name.
    However on some rooms we can search by the display name.
    Any known issue here? Or anyone experience this?

    Hi Johnny,
    We can search the rooms by using Alias, if they also working well, then it seems the migration from Exchange 2007 to Exchange 2013 complete successfully.
    Did someone rename the display names? It needs some time to cover the modification.
    Please also get mailbox via display names to verify whether we input the correct display names.
    Command as below:
    Get-Mailbox DisplayName
    If everything going well except the "searching via display name on some users", I suggest intalling the CU3 or SP1. The Exchange 2013 SP1 will release in a short time later.
    Hope it is helpful
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • ERROR ITMS-9000 "The bundle uses a bundle name or display name..." when uploading to iTunesConnect

    I'm receiving the error "ERROR ITMS-9000 "The bundle uses a bundle name or display name associated with an Apple app." when uploading to iTunesConnect.
    Version 1.0 or our app is currently on the App store, an I'm trying to upload a version 1.1.
    I'm trying to change the name of the app from "Augsburg Now" to "Augsburg Gallery".
    I changed the name in the App ID on developer.apple.com to "Augsburg Gallery, but left the ID as edu.augsburg.augsburgnow
    I generated new Development and Distribution provisioning profiles, since the App ID name had changed.
    In DPS App Builder, I changed the App name to "Gallery", and the Title (library view) in DPS App Builder to "Augsburg Gallery", and then created a new binary.
    I changed the App Name in iTunes connect to "Augsburg Gallery"
    I don't see the problem, since I left the bundle id, app id, etc. all unchanged.
    Any ideas?

    It sounds like you did everything right, Keith. I just did a similar thing recently to change my app name from "Digital Publishing Suite Tips" to "DPS Tips," so I know it's possible. In iTunes Connect, you submitted the app as a new version, not as a new app, right?
    I would try building a new app and submitting it again.

  • How to localize the bundle display name? (name under icon on device)

    Hi,
    Does anyone know if it's possible to localize the apps bundle display name for different countries?
    I mean the name that's under your appicon on the device, not the name in itunes connect.
    It seems to be possible with xCode by changing some plist files, but I can't find any info on doing this with AIR.
    Thanks!

    Hi Yubi,
    a change in selection text will change in the screen.
    else u can create a text element and use
    selection-screen comment text-001.
    we cant modify standard programs. the above is for Z programs only.
    thanks,
    teja.

  • Hey i want to change my display name.i searched my enter profile for it

    i want to cahnge my existing display name in this thread but i dont know where to do it.i searched my entire profile for it.i know i should be asking this but i am feeling uneasy each time i post with this name.sorry for the transgression

    I too have the same reuirement. How can I create a new profile which uses the same e-mail address.

  • Results Priority - Search Display Name 1st

    Hi,
    I've set up a custom search which works great, apart from one thing - It seems to be giving priority to word 'hits' in the document items before the display name.
    For example
    When searching for 'Asset' I get the following results:
    Accommodation Provider Payment Form - 100%
    Asset Inventory Form - 20%
    Asset Inventory Transfer Form - 11%
    Accommodation is picked out 1st as it contains several occurences of 'asset'. I would like the search to give preference to 'Display Name' 1st, then the document body text. Is there any way I can do this?
    Thanks.

    You need to add the "exe" file extension to the list of file types that need to be included in the search index. You can do this on the File Types page of the Search Administration (Central Administration).
    Go to you Search Service Application and under the Crawling section you find a link called
    File Types. At the top of the page click on New file type and add the "exe" file extension. Once that is done, restart your search service and do a full crawl.
    http://www.eliostruyf.com

  • Display Name of App - French works, English doesn't

    Hey guys,
    I've done a LOT of searching on this forum and stackoverflow, because I'm having a problem localizing the display name of my app. I've found threads like this one (https://discussions.apple.com/message/8185295#8185295) and followed the advice. I have two InfoPlist.strings files, one for english and one for french. The contents of the english one looks like this:
    CFBundleDisplayName = "EnglishName";
    CFBundleName = "EnglishName";
    And similar but french strings in the french file, of course.
    I have the "Localization native development region" set to "English" in my plist file, as well as "Application has localized display name" set to YES. I also removed "Bundle Display Name" from my plist file, though I've also tried it with it there.
    Nothing works in english. When I set the device to french, I see the localized french name of the app just fine. But when I set the device to english, I see the Target name of the app under the icon.

    I hit the wrong key, and the post was posted before I was ready.
    Part two:
    So how do fix this? The english name shows up sometimes, and I think it's solved. But then it always reverts to the Target name.
    Any help would be greatly appreciated.
    henning

  • SharePoint 2010 Web Analytics showing user Display Name and Account Name from the same user

    Hi!
    Since July, 16th 2012 the Web Analytics Daily Unique Visitors reports started to show almost the double of visitors we used to have on our Web Application. Here are some of the data (I intentionally deleted the weekend data):
    10/7/2012 2.497
    11/7/2012 2.723
    12/7/2012 2.722
    13/7/2012 2.699
    16/7/2012 5.055
    17/7/2012 4.963
    18/7/2012 4.954
    19/7/2012 4.998
    20/7/2012 4.965
    23/7/2012 5.117
    24/7/2012 5.012
    25/7/2012 5.071
    As you may notice the data jumped from around 2.700 unique visitors to around 5.000 unique visitors. As the number of permissioned users remains constant it is pretty odd. I also checked the Number of Page Views report and see no change on its behavior.
    The number of page views remained constant.
    So I went to look the Top Visitors report and understand why the visitors number almost doubled. The analytics started to count the users Display Name and Account name as two different visitors with a different number of page views. Let me show you an example
    from yesterday (July, 25th) Top Visitors report:
    #     Visitor                  Page Views    %
    1    Cinthia XXXXXXXXXX    359        0,55%
    5    Giselle XXXXXXXXXX     143        0,22%
    7    Aline XXXXXXXXXX       138        0,21%
    15  nt\cmazevedo              111        0,17%
    60  nt\gbsantana                 69        0,11%
    73  nt\aglsiqueira                 65        0,10%
    "Cinthia" and the account "nt\cmazevedo" are the same person. The same is applied to "Giselle" / "nt\gbsantana" and "Aline" / "nt\aglsiqueira".
    As I stated this is an example from July, 25th. If I checked the same report from a period before July, 16th I can only see the users Display Name as "Visitors". No account name is displayed or counted as a different visitor.
    About the environment:
    We have two SharePoint 2010 farms: a "corporate" and a "enterprise". The corporate farm contains four web servers and a central administration servers with publishing services. The enterprise farm contains two servers running User Profile Services, Search
    Services and some others. Our main version is the SP1 with June/2011 Cumulative Update with a few more hotfixes applied.
    This behavior on analytics is affecting all web applications (we have more than 20) installed on this farm and my company Support team said that no change were made on SharePoint on the weekend the problem started.
    Does anyone have any tip about what is going on?
    Thanks in advance!

    Hi, Manas!
    First of all thanks for your interest on this issue but I don't think it is related to the User Profile or the Active Directory.
    I checked both records and there was no change on the Display Names. All the users have "full names" as display names (first + middle + last name) and not logins as SharePoint is displaying on this report.
    But I did a test yesterday and checked the results today confirming that just the access been made using a specific server are causing this. Explaining it better:
    I have four web servers on my farm named from P01 to P04. Then I created this test script:
    Step 1: Change local HOSTS file to point the web application on the server P01.
    Step 2: Access site "A"
    Step 3: Access site "B"
    Step 4: Close the browser.
    Step 1: Change local HOSTS file to point the web application on the server P02.
    Step 2: Access site "C"
    Step 3: Access site "D"
    Step 4: Close the browser.
    Step 1: Change local HOSTS file to point the web application on the server P03.
    Step 2: Access site "E"
    Step 3: Access site "F"
    Step 4: Close the browser.
    Step 1: Change local HOSTS file to point the web application on the server P04.
    Step 2: Access site "G"
    Step 3: Access site "H"
    Step 4: Close the browser.
    I asked three users to execute that script. The results: All access to the sites "C" and "D" were registered on Web Analytics with the user account name such as "nt\cmazevedo". All the other sites registered the user Display Name correctly such as "Cinthia
    XXXXXXXXXX".
    With this test we could isolate the problem just on the server P02. It doesn't occur on the others. Now my support team is trying to find any configuration difference between this server and the other three that could point for the root cause.
    I am also looking for some information regarding the service responsible for this task ("transform the account name into a display name") to understand why it doesn't work on one server and works on the others.
    Thanks!

  • Sharepoint 2013 - Search for link names on a single page

    Hi
    I am messing around with SP13 and trying to get my search result web part to only search for link names and display all results.
    I have created the search source to point at the sub site. If I search for part of a link name it will list all links in one long row as a single result.
    Example: One single page contains all links. Each link points to a .aspx page. The search source is pointing at this page and it can display results but only as a single result containing all links as one line of text.
    Say I have 1000+ links of which 50 has names such as Link1-Item1-Basket1, Link1-Item1-Basket2 up to Link1-Item1-Basket50.
    When I search for Link1-Item1 I would like my search results to display 50 results as 50 individual links.
    Is this possible?

    Hi,
    Yes, you can format the search results as you expected.  But you have to create a custom display template to format your results such as extract the links from each results and display it as separate link.
    Once display template created you have to map the display template to your search results web part.
    Please refer to the following articles.
    SharePoint 2013 Customize Display Template for Content By Search Web
    Part (CSWP) Part-1
    Introduction to SharePoint 2013 Display Templates
    Display Template Overview
    Please mark it answered, if your problem resolved.

  • How can I customise Thunderbird message columns to show sender raw address (not display name) and the "Received for" email address that was used to reach me?

    I find it increasingly important to be able to see a sender's actual email address rather than just display name, as they usually don't show a company name - which a domain always would. Is there a way to customise settings/write a script/tweak files to add raw email & domain name columns? When dealing with a number of people at the same company it is hard to order or glance through a list of emails to find them. I also know 2 people with the same name at different companies and it is impossible to distinguish!
    Secondly, as a related column addition, since a number of email aliases reach me it would be useful to have a column to show the "Received..for" part of the message source which reveals the actual email used in the To/CC/BCC which led to me. Again can this be tweaked or scripted?
    I have programming experience but have not made add-ons and would be open to a suggestion which involves creating a custom add-on if adding columns with custom values is possible that way.
    Best Regards,
    Drew

    Extended message headers can be searched from Edit/Find/Search Messages, or the folder context menu, by adding custom headers to the search criteria. So, you might be able to create a search on specific properties of a message.
    The method of adding custom headers to searches is the same as the one described here for filters:
    http://kb.mozillazine.org/Filters_(Thunderbird)#Custom_headers

  • In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

    Hello, all.
    In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

    Click the search magnifying glass and uncheck "Search entire library".
    Type in the name of the track.
    Click the album of interest to show tracks.
    Select the track.
    Press the X in the search box to clear the search.
    Double click the track you want to start playing first.
    tt2

  • For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist.  However, if I search the album name, all the songs show.  How do I get the songs to show under songs?

    For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist.  However, if I search the album name, all the songs show.  How do I get the songs to show under songs?

    Hi Spam_Valley,
    I understand that you are having issues with your music displaying correctly. This may be an issues with the metadata stored within that song, and iTunes interpretation of that info.
    We may need to repair this. See the following resources for information:
    iTunes 10 for Windows: If song titles don’t appear correctly
    http://support.apple.com/kb/PH1468
    Fixing Incorrect Song or Album Listings in iTunes
    http://support.apple.com/kb/TA24677
    Thanks,
    Matt M.

  • Bridge CS4 Search Not Displaying NEF Files + Keyword Problems

    Hello, I am hoping someone can be of service to peculiar problem that apparently nobody else has had.
    I am running Adobe Bridge CS4 (came bundled with Photoshop Elements 8) on a 2009 24 inch iMac with 4GB RAM and a 2.6mHz processor running Snow Leopard v10.6.2.
    I use Adobe Bridge CS4 to add Keywords to all my photos and edit 14 bit Nikon NEF RAW files. I write the keywords to an .XMP sidecar
    file.
    Two days I ago I changed something in Preferences->Metadata and the next time I started Bridge CS4 and used the loupe tool on a NEF
    file, it took longer than usual for the preview to come up and when it did, it was at 200% magnification instead of 100%. Once the loupe preview showed up, the NEF file had some sort of processing applied to it (it became more contrasted.) This was all within Bridge ant NOT Adobe Camera Raw. I quit the program and the next time I started Bridge, it crashed upon using the loupe tool. I looked up help on Adobe's website and it appeared I had corrupted preferences. Per Adobe's instructions I option clicked at Bridge startup to delete the preferences and purge the cache.
    Everything appeared to be normal until today when I searched for a keyword and got 36 random results when I know I have hundreds of
    photos tagged with that particular keyword. I started typing in other keywords and getting the same sort of results- very limited numbers of photos I have hundreds of. I always include all subfolders in all searches and used every search method available through Bridge to no avail. The searches always came up with a fraction of the photos I actually have tagged.
    I then verified and repaired all disk permissions from the operating system installation CD and Bridge started returning results as
    usual. However, when I clicked on an individual file in the Content pane, some of my Keywords started to appear in italics below the rest of my Keyword tree. There doesn't appear to be any rhyme or reason as to why some images will return the Keywords normally and others in italics. Also, sometime the italicized keyword tree will include keywords I edited due to typos and thus no longer existing my normal Keyword tree. I gave the "Make Persistent" command a try. It converts the italics to regular case, but it also doubles the tag so I now have two of that tag (one in the normal keyword tree, and the now converted italics keyword tree.)
    Now I'm noticing that all my search results are not including NEF files; just JPEG and the occasional DNG file that I made through Adobe Camera RAW. I'm not sure if this has been the case throughout my problem or if I just noticed it late.
    Regarding not displaying NEF files in searches, it appears that it will default to displaying JPEG if it has the option because as of lately I have only been shooting RAW and some of those files are showing up in the still-wonky searches (still displaying random or no photos of keywords.) However, if I manually navigate to a file, I can open and edit NEF files with no problem, they just don't display in any search modes.
    Here's two short videos of what happens when I navigate a folder with NEF files by manually searching:
    http://www.youtube.com/watch?v=WDjUDZzULKQ
    http://www.youtube.com/watch?v=-Y9HkDK7DCs
    When I click on a NEF file, the one ahead of it in Content view processes into a more contrasty image and the loupe tool previews jump between 100% and 400% and then change to 100% when dragged or they just process themselves right then and there.

    I am running Adobe Bridge CS4 (came bundled with Photoshop Elements 8) on a 2009 24 inch iMac with 4GB RAM and a 2.6mHz processor running Snow Leopard v10.6.2.
    Snow Leopard and Bridge CS4 do have some issues. Some have no problems and others have much problems I'm afraid.
    I use Adobe Bridge CS4 to add Keywords to all my photos and edit 14 bit Nikon NEF RAW files. I write the keywords to an .XMP sidecar file.
    To my knowledge the keywords are written into the XMP Metadata that is saved in the IPTC section of file itself, the XMP data in the sidecar file contain the changes you made in ACR. In other words, the keywords you have added should still be there.
    Also see this Knowledge Base article about Keywords:
    http://kb2.adobe.com/cps/402/kb402660.html
    Two days I ago I changed something in Preferences->Metadata and the next time I started Bridge CS4 and used the loupe tool on a NEF file, it took longer than usual for the preview to come up and when it did, it was at 200% magnification instead of 100%.
    Changes metadata in prefs only affects the visability of the fields in the metadata panel. put or deselect a checkmark in front of an option will let you see or not see the field in this panel, the actual data and fields ar still in the file.
    it was at 200% magnification instead of 100%. Once the loupe preview showed up, the NEF file had some sort of processing applied to it (it became more contrasted.) This was all within Bridge ant NOT Adobe Camera Raw.
    You can change the magnification for the loupe to 100 / 200 / 400 and 800 % using the scrollwheel or with loupe active the + and - keys. Bridge shows the settings that you made in ACR. If you have changed the default Camera Raw setting it will also change the thumbs for this file. A thumbs needs some time to be cached. First it shows with a black border around, when first cached it shows the embedded preview and in the second round it renders the ACR settings and High Quality preview (if you have not disabled this setting). Caching needs some time.
    Everything appeared to be normal until today when I searched for a keyword and got 36 random results when I know I have hundreds of photos tagged with that particular keyword. I started typing in other keywords and getting the same sort of results- very limited numbers of photos I have hundreds of. I always include all subfolders in all searches and used every search method available through Bridge to no avail. The searches always came up with a fraction of the photos I actually have tagged.
    Maybe you need to let the indexing in find do its work again but it might also be a snow leopard issue. Try an other app (Digital Asset Management like Expresion Media or  Portfolio) to check about the keywording and find. You can use a trial version for several days. You have several options to use find keywords. In the panel itself, in the filterpanel uner the keyword tab, when clicking on a visible keyword it only shows the files with that keyword or in the menu Edit / find (shortcut cmd + F) explore the options in this menu and also choose include non indexed and let Bridge start to index your files again.
    However, when I clicked on an individual file in the Content pane, some of my Keywords started to appear in italics below the rest of my Keyword tree. There doesn't appear to be any rhyme or reason as to why some images will return the Keywords normally and others in italics. Also, sometime the italicized keyword tree will include keywords I edited due to typos and thus no longer existing my normal Keyword tree. I gave the "Make Persistent" command a try. It converts the italics to regular case, but it also doubles the tag so I now have two of that tag (one in the normal keyword tree, and the now converted italics keyword tree.)
    Don't know about that.
    Here's two short videos of what happens when I navigate a folder with NEF files by manually searching:
    http://www.youtube.com/watch?v=WDjUDZzULKQ
    http://www.youtube.com/watch?v=-Y9HkDK7DCs
    When I click on a NEF file, the one ahead of it in Content view processes into a more contrasty image and the loupe tool previews jump between 100% and 400% and then change to 100% when dragged or they just process themselves right then and there.
    As you can see the black border around some file that disappear after a while or when you select them they have not been cached. You used purge cache so most of your earlier cached results are gone and need to rebuild.

  • Update name, surname from display name - script needed

    Hello
    I'm moved from Postfix to Office365. My users has only display name field filled. This is a problem when we try to find an user, because only way is to find it when You will put name in search field.
    I decided to build a script that will first check if the user has "Name" is filled if not then we need to take  display name. Divide it (take first word into name and rest into
    surname). Next update users name and surname.
    I try to make such script but my skills are not enought to do it, so I ask You for help. I know that this is a piece of cake for You ;)
    Regards
    SLawek

    Hi,
    Prewritten scripts can be found in the repository here:
    https://gallery.technet.microsoft.com/scriptcenter
    If you don't find what you need and you can't write your own, you can request a script here:
    https://gallery.technet.microsoft.com/scriptcenter/site/requests
    Let us know if you have any specific questions.
    Good luck.
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

Maybe you are looking for