Business System creating issue

there are two Production SAP R/3 on our landscape.
so we can see PRD on AHOST and PRD on BHOST on technical system on SLD. they are using same 100 client.
whenn i create BS, I got error message
"The selected client has an associated logical system name that is already used for another business system. select a different client"
Due to using same PRD, even though they are different host name, it show us when creating BS,
i think that it does not make sense because many r/3 sid are used by PRD or DEV.
does anyone has such issue?
thank you
YD

If both are brand new, or at least one is new (it means they're not being exchanging IDocs, BDocs, or are somehow connected to other SAP boxes like APO, BW, etc) you should consider to change one of the two logical systems in SCC4.
Otherwise... suppose you want to route an IDoc (coming from R/3) based on which PRD instance issued it: you won't be able using the LOGSYS, but you can prob use some other fields of the control record, properly set.
If you just don't mind, let your SLD think that you have just one system. For IDocs going to SAP, you'll just be able to decide whether they should go changing the pointing of your IDOC receiver channel.
But this is a very strange situation anyway. What I wrote are just suggestion based on exerience and common sense. Hope that helps somehow.
Alex

Similar Messages

  • Cann't find a business system created in  ID

    Hi all:
         I created a business system in SLD but it couldn't be found ID. however others could be found , could you please give me a hint how to sovle it ?
        Thank you very much !
    Best regards

    Hi
    First Import BS in ID.
    Right Click on Configuration Scenario and click on Assign, then run Wizard to assign BS. Now it would be in ID in Object List.
    After import Refresh SLD cache.
    Now this would be avail in Object list, now from there u can assign it to your Scenario.

  • Business Systems into ID

    Dear All,
    Could anyone please let me know how to import business systems Created in SLD into ID.
    one more clarification.
    if i add new business system to my existing landscape and i want to import to my ID, will it effect my existing scenarios which are already running.
    if i want to achieve above requirement ...please guide how to do this
    Anticipation of your Early response
    Regards,
    VJ

    Hi,
    1.create a scenario,
    2.Right click on Busyness system adn click assain busyness system.
    3.It will show a wizard hear click u r Created Busyness System in SLD and uncheck automatically genarated cc
    4.Click Finish.
    By follow this steps a Busyness system in ID created from SLD..
    It will not effect by adding another busyness system...
    Plw award points
    thanq

  • Assign Business System in Integration Directory

    Hi all,
    i have basic question.
    in my ID, there are some configuration scenarios.
    for example, the left side look like,
    in case,one of Business System created on SLD was assigned to one of configuration scenarios,
    i would need to assign same business system into Business System in Service Without Party in another configuration scenarios, it was not possible to assign.
    can i assign BS1 to several configuration  scenarios?
    or should i create Main scenario in order to define communication channel?
    thanks in advance
    venjamin

    Hi venjamin
    Yes, you can assign the same business system to different configuration scenarios.
    to do this there are 2 ways.
    1. Open the cofiguration scenario to which the business system has already been  assigned.
    Right Click on the Business System> Add to Scenario> Select the scenario to which you want to
    assign your business system.
    2. Select the objects tab>service without party> business system> your business system> right click-->
    assign to scenario and then select your scenario.
    Hope this helps,
    Regards,
    bhavesh
    Message was edited by: Bhavesh Kantilal

  • I am not getting Business System into my Integration Directory.

    Hi All!
       This is satish, <b>I created Business system in SLD. How to get them in Integration Directory.</b>Please help me.
    Thanks in advance!

    Hi Satish,
    Go to Service without Party->Right Click->Assign Business System->it will show you list of Business Systems created in SLD -> then go ahead
    Then
    2 options to refresh the cache-
    Integration Directory->Environment->Clear SLD Data Cache
    Another way is -go to SXI_CACHE / Goto - Business System -> delete the content
    Still , if you are not able to see the Business sytem in the Directory, the just go and check in the SLD. If it exists just change and save it.
    Then synchronise the same by SLD cache refresh as mentiond.
    changing BS
    Also refer for more-
    Problem in Assigning the Business System
    Hope this helps,
    Regards,
    Moorthy

  • Business system not found in CPACache

    Sceinario was working fine before XI system crash. After the system is reestablished the scenario not working. Giving RFC error "Service: SAPESRI not found in CPACache" in R3 system
    CPAcache refreshed for dela  as well as full
    Adapter specific identifiers are fine
    SLD cache cleared in IR ID
    Business System name is found in CPAcache
    error repeated
    Business System deleted from SLD. New business system Created. Entire scenario reconstructed. All the above are also fine.
    Still error is repeating.
    Can anybody give a solution for this problem please?
    Regards,
    Venkat

    Hi Venkat,
    The subject of the problem & the problem explanation is varing i.e *Business system not found in CPACache*
    However, the problem still lieing with SLD. So, test the SLD and activate the scenario. Also without refreshing CPA cache you will have to perform execution.
    Regards
    Pothana

  • I have error while testing the system created from a sap business objects template in SAP portal

    I have error while testing the system created from a sap business objects template in SAP portal. Error text:
    com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
    I configure integration SAP portal and SAP BW system. All system requirements are complied.
    Environment
    SAP Business Objects 4.0
    SAP BW 7.31
    1.     I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
    2.     Next I setting integration SAP PORTAL with SAP BW system
    3.     I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
    4.     In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
    5. Select Export entry button and binary format file certificate for download. Press download.
    6.     Save certificate file in local PC folder
    In next step need export certificate file to SAP system. Sequence of step:
    1.       Run STRUSTSS02 transaction .
    2.       Chose certificate ->import.
    3.       Select downloaded certificate file
    4.       Select Add to certificate list button and Add to ACL button
    5.       Inter System ID and Client(000)
    6.       In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
    7.       Result – downloaded iview.
    8.       In next step I create system from template. System administration->system landscape.
    9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
    10.   When I created the system and test the connection error occurred: See screen_3
    This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.

    Did you find a solution?

  • ATP Check Issue - No business system could be determined for logical system

    Dear all
    Got an issue while executing ATP check on a planned order in product view,
    with a message: "No business system could be determined for logical system"
    CIF setting wise:
    regular business system group maintained and assigned in place,
    master data wise:
    business system group info fine in product master,
    Is there anywhere suggested to check under ATP setting:
    category, check mode, business event, check control/check instruction?
    Your kindest enlighting is appreciated,
    Thank you,
    mandy

    Dear Mandy,
    usually this error is caused by a missing customizing entry:       
    spro:                                        
    Integration with SAP Components
       Integration via APO Core Interface (CIF)
         Basic Settings for Creating the System Landscape                             
           - Maintain Business System Group
           - Assign Logical System and Queue Type :
    Please read the documentation for these two transactions and create the systems.
    You need to specifiy there all systems that are in your BSG. The documentation for the customizing of 'name logical system' in APO  says:                                                                               
    To enable the transfer of data between SAP R/3 and SAP APO, you need to name both the SAP APO system in which you are working and the SAP R/3  system to which you want to transfer data as logical systems.          
    I hope this helps.
    Regards,
    Tibor

  • Creating a Business system in the SLD

    I am receiving an error message when trying to create a business system in the SLD. The error is "The selected client has an associated logical system nae that is already  used for another business system. Select a different client."
    Here is my issue. The business system that I am creating is for our R/3 4.6C production system. I currently have a business system for our R/3 4.6C quality system. Our prodution and quality R/3 systems do have the same logical system name and client number. This is because we recreate our qaulity R/3 system from our production system.
    So, the question is, How do I create a business system in the SLD for my production R/3 system when the logical system name is used assoicated with and business system.
    I should add that all my R/3 systems have been created as technical systems without any problems.
    Thanks,
    Jim

    It is recommended to have all ALE names unique.
    If it is not possible the following workaround can be used.
    Create one system in SLD (business system/technical system) which contains the ALE name. Proposal: The production system
    Create the other systems(dev/QA) without the ALE name
    During configuration the production system will be configured as usual.
    For Dev/QA systems: Define in the receiver agreement the header mapping and use The Receiver service to reference the production system. Because you reference the production system the ALE name of the production system will be used to fill the idoc.

  • Business system issue

    Hi All,
    I am working on SAP PI 7.31 dual stack ( SP8).
    Our non- Prod SLD ( dev and QA)  is pointing to QA system. Basis team have created one Third party Business System in QA System SLD .
    The issue is while importing the Business system in  Dev system i am not able to see the required Business system.
    Moreover while checking the QA system i can see the same Buisness system present in the import queue of QA system.
    I have done the SLD cache refresh and also done the delta cache refresh as well!
    Can some one please help me out in this or anyone faced this issue before please revert back.
    Thanks for your inputs on this.
    Rgards
    Prashanthi

    Hi
    Normally the transport path is like that
    Dev----> quality--->production
    In the SLD, the business system mapping should be like this
    Source               target
    DEV BS            QA and PRD PS
    QA BS              PRD BS
    How you are importing the business system in DEV ? by using transport ? have u check the log of transport request in SE01 or SE10
    You can directly assign the business system in dev
    Goto  Business System--right click and select assign business system-->select the business system from SLD.

  • Unable to create Business System with role Integration Server

    hi Experts,
    we are unable to create a BS with role of integration server, its throwing error with internal server 500.
    please advise. we do not have any issues while creating TS with role of WEBASABAP.
    thanks and regards,
    Kesava
    Edited by: Prateek Raj Srivastava on Jan 23, 2012 12:13 AM

    Hi Kesava,
    what is the purpose of creating a business system of type IS? This is automatically done in the post installation by CTC templates. So if the post installation is successfully executed, this should already be there. And if not you should check if the post installation was properly executed and if there where problems analyse why they occured.
    The creation of the BS is just one part of the game, so I would highly recommend to execute the hole post configuration via template or follow the help.sap.com and execute it step by step manually in the described order. Otherwise i guess this will not work.
    If there where just problems with SLD - please also have a look at SA Note 1117249 - Incomplete Registration of PI components in SLD
    best regards,
    Markus

  • CIM_ERR_ALREADY_EXISTS: Error while creating Business System

    Hi,
    I am getting following error while creating Business System in SLD, the Technical System is already created from RZ70 transaction in the IDES system
    Error Creating business system: CIM_ERR_ALREADY_EXISTS: Instance already exists://inbbssun01/sld/active:SAP_LogicalALESystem.CreattionClassName="SAP_LogicalALESystem", Name = "LSIDES800.SystemName.800.SystemName.IDS.SystemNumber.0020224902.SystemHome.idesecc"
    Thanks,
    RP

    Hi,
    This error means that a business system with this name(or associated with this technical system) is already there in SLD.
    You need to check that before you try creating it (might be someone else have created it before)
    Updated
    If you have created and deleted a business system and then trying to recreate one then you need to delete all the instance of it from Content Management (in SLD)
    Regards
    Suraj
    Edited by: S.R.Suraj on Nov 9, 2009 12:34 AM

  • How To Create A Technical And Business Systems For Web AS ABAP ???

    Hi Experts,
    How To Create A Technical And Business Systems For Web AS ABAP ???
    Please Let me Know All the Step-By-Step Process to Create ????
    Points Will be Given
    Regards
    Khanna

    Hi Sumit,
    When U Told the thing that first time to execute the RZ70 and All i Did this in XI System
    So I got An Entry for the Technical System for XI System.
    Now i Deleted that and Executed RZ70 in R/3.
    When I Executed RZ70, I got this Error.
    <b> "RFC Call failed: Error Opening an RFC Connection "</b>.
    Now I am Unable to see Any Technical System  Under Web As ABAP. It's Showing Empty Now.
    Please Let me know
    Regards
    Khanna

  • How to create the Business System both sender and receiver in SAP XI / PI

    Dear All
    kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
    Regards
    Blue

    Hi,
      If by any chance you are not able to find these....
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
    http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
    Regds,
    Pinangshuk.

  • PISUPER not able to create business systems

    Dear All,
    I am trying to create business systems in ID using PISUPER by importing from SLD. However, I keep getting a warning message saying 'Insufficient authorisation to create communication component'.
    I check for all the required roles for PISUPER and they exist.
    When I checked the J2EE logs, i can see the below error:
    Context does not exist session id=com.sap.engine.session.exec.UserContextImpl@254ea7b6[ clientId=null, clientSessions=[], persistent Model=null]
    Location: com.sap.conn.jco
    Please could someone help me to resolve this.
    Thanks
    Vasu

    check if you have USERS: PIDIRUSER & PIREPUSER
    with Roles:
    SAP_XI_ID_SERV_USER
    SAP_XI_MONITOR_J2EE
    And User Type must be service.
    Also check Users are not locked.  
    also check if everything is fine with user SAPJSF...
    (TCP/IP) LCRSAPRFC should point to correct Integration Server.  Also the Program ID should be registered in the JCO connections of Integartion server with user SAPJSF.

Maybe you are looking for