Bw Question :regarding the versioning

Hii All,
I did post a question regarding to the versionining of the cube on friday 9th May and still i did not get any reply on that.Plz let me know.otherwise plz keep me posted that you are unable to reply to my question.
My Question was :
In the Versioning of the cube ,we give that version a particular name and select the value type of it as : 110 or 130 or 140. what is this value type .. ? what does this 110,130 or 140 really mean ?
Why we need this value type.? and can we get some documents to read and explore this value type ?. Plz help.
Thanks & regards ,
Madhavi S Bichakal

Hi Madhavi,
Basically in BW you'll find two characteristics used for versioning:
- Version: Used to create different versions of the information
- Value type: used to indicate what the information means.
Examples:
Version 000 is usually Plan/Actual data (the final version). Then, for version 000 you will have different value types, like 010 = Actual, 020 = Plan, 030 = Target, etc..
Then you can have different versions (001, 002, 003) that are used in the planning process. You start with version 001, then you can move to 002, 003,... and when you have the final Plan, you move to 000.
That's the usual usage of version / value type.
but, you can use it as you want. The only problem that you can have is that if you rename the description of a value type, and then you activate a BCT that generates data for that value type and the description will be incorrect.
From what you said, you are using values from 100 and above, SAP uses up to 90 from what i've seen, so you won't have any problems.
Hope this clarifies.
Regards,
Diego

Similar Messages

  • Question regarding the installation of a J2EE 6.40 Add-in

    Hi all,
    I would like to install a J2EE engine on a test instance of ECC 5.0 and have a few questions regarding the installation...
    Do I have to use the MASTER CD to first install the J2EE engine (Support Package 0) and then apply the latest support packages found on the SAP Marketplace?
    Or should be able to directly install the J2EE Add-In by using the latest support packages found on the SAP Marketplace?
    Best regards,
    Xavier Vermaut

    Thanks Bhavik for your reply,
    That's what I actually thought but I get the following problem... Here's what I wrote into my customer message... I am still waiting for an answer and would like to get this solved ASAP
    Dear SAP,
    We would like to install the J2EE 6.40 Add-In on our ECC 5.0 instance
    (TST) but get the following error message at the very beginning of the
    installation
    > Cannot find an installed ABAP system, which is a prerequisite for a
    > J2EE Add-In installation. The installation cannot continue.
    We checked the installation logs (sapinst_dev.log) and found the
    following :
    > Found these instances:
    > sid: MGR, number: 00, name: DVEBMGS00, host: erpqs1a
    > sid: TST, number: 10, name: DVEBMGS10, host: erpqs1a
    Why does the installation say that it can not find any ABAP systems when
    having previously found the 2 different instances running on this
    server?
    Would this problem be related to the fact that we have two instances on
    this server?
    Please find hereunder the way we performed this installation :
    01) Download of the 4 different parts of SAP J2EE Engine 6.40 SP 10
         (Solaris 10 - Oracle)
         Part I   : SAPINST10_0-20000121.SAR         (Solaris 64)
         Part II  : CTRLORA10_0-20000121.SAR         (Solaris 64)
         Part III : J2EERTOS10_0-20000121.SAR        (Solaris 64)
         Part IV  : J2EERT10_0-10001982.SAR          (OS Independant)
    02) Extract these 4 archives into /install/J2EE_640
    03) Check Java Version and Environment Variables
    04) Check Solaris Pre-Requisites
    05) Adapt "product.xml" as specified in OSS Note 697535 (IGS)
    06) Log in as 'root'
    07) Set DISPLAY environment Variable
    08) Move to the Installation directory
          ( /install/J2EE_640/SAPINST-CD/SAPINST/UNIX/SUNOS_64 )
    09) ./sapinst
    10) In the 'Welcome to Netweaver Installation' screen, select
          => Dialog Instance Finalization
    Any idea how to get this solved?
    Best regards,
    Xavier Vermaut
    Message was edited by: Xavier Vermaut

  • I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

    I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

    I will address your second question.
    First, make sure your iPhone and iPad have absolutely identical Apple IDs.  If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option.  Lo and behold, all your iCloud notes should appear on your iPhone.

  • I have read all the questions regarding the "Can't send photo using iMessage".

    I have read all the questions regarding the "Can't send photo using iMessage". I followed everything and check everything that was in it. It's still the same. I am still not able to send a photo. It started happening last week. It was fine before that. There is no error message.
    It will try to send but it will get stuck just before it sends
    and the red ! will appear with the "Not Delivered" status.
    When i tap on the !, it just says "This iMessage was not delived".
    No other message or photo is sending as the same time as the photo.
    I did reset it, I checked the email address, removed it as well. Turned it off then back on. Signed out and signed back in. Wi-Fi strength is very good. iOS is 6.0.1. I checked for updates, it is up-to-date I also checked a link http://support.apple.com/kb/TS2755. It did not help at all.
    What's wrong?!?!?!?!

    It is not a matter of reconsidering the decision. There are unsolveable technical problems with trying to run a program such as Firefox on Blackberry OS. We would need Blackberry to distribute a tool similar to Android's NDK to run on Blackberries.

  • Hello, I have a question regarding the sharing/exporting on imovie. Whenever I click the share button all the normal options pop up, but when I actually click where I want to share it to nothing happens.  If you know what's wrong please let me know.

    Hello,  I have a question regarding the sharing on iMovie.  I have just recently purchased an Elgato Gaming Capture HD and I then finished my recording with that and put it into imovie.  I worked long and hard on the project and when I go click the share feature on iMovie all the noral options pop up and when I actually click where I want to share it to nothing at all happens.  If you know what is wrong/ what I am doing wrong please let me know.
    Thank you.
    PS:  I am using iMovie 10.0.6.

    /*line 957 error */
         public void select()
              for (count = 0; count <= p; count ++ )
                   if(P[count] != null){ /* validation */
                   m = (int)(P[count].getX());
                   n = (int)(P[count].getY());
                   if (Math.pow(-1, m + n) == 1)
                        piece[m][n].setBackground(wselect);
                   else
                        piece[m][n].setBackground(bselect);
              step = 2;
         }

  • Some simple questions regarding the Xcode.

    I have some preliminary questions regarding the Xcode (objective C):
    What is the difference between the programming files followed by .h and .m?
    What does an asterisk * followed by a text mean (i.e. *window;)?
    Is there any source that briefly explains the most common codes with examples (nsstring, nsarray, iboutlet, inaction.....etc)?
    Any other tips will be highly appreciated.
    Many thanks.

    Xcode is the IDE.
    Objective-C is the most common language used within Xcode.
    UIWindow *window .....  the * means return the address of the instance variable 'window'.
    An * is called a pointer to a variable.
    Everything you need is explained here:  https://developer.apple.com

  • Question regarding the "mcxquery" and "dscl -mcxread" commands:

    Question regarding the mcxquery and dscl -mcxread commands:
    Does anyone know why the mcxquery and the dscl . -mcxread commands don't show any info about MCX managed login items & printers? The System Profiler's "Managed Client" section does. Id like to see info regarding managed printers and managed login items using the mcx tools. I have Mac users running 10.5.2 with both login items and printers that are pushed out to them via MCX. The System Profiler app shows all of their policies, but the dscl . -mcxread and mcxquery tools dont. Why not?
    -D
    Message was edited by: Daniel Stranathan
    null

    How do you "call procedures/functions" without sql code? You need at least the call statement like
    {call myProc(?,?,?)}that you wrap into a CallableStatement.
    Other than that: when you switch off autocommit, you need to call commit/rollback at the end. Usually, if you don't commit/rollback a non-autocommitted connection, the transaction get's committed/rollbacked when you close the connection - that depends on the JDBC driver. But it's never a good idea to ommit the commit/rollback calls on a non-autocommit connection. Usually you enclose your code in a try/catch block like this:
    con.setAutocommit(false);
    try {
       con.commit();
    } catch (Exception e) {
       con.rollback();
    } finally {
        con.setAutocommit(true); //or:
        con.close();
    }

  • Question regarding the Transformation activity in BPEL

    Hi,
    I have a question regarding the Transformation activity in BPEL.
    I have a database adapter that uses a PL/SQL API. The API returns two tables of nested objects and it automatically generates a schema for me based on the outputs structure. I need to use the Transformation activity to map both these out parameters to root element in the destination.
    The element in the destination is "unbounded". Please take a look at the following screen shot -
    http://www-apps.us.oracle.com:1100/~rvishnuv/transform1.gif
    From the screen shot, you can notice that I have two XML segments X_TEST_TBL and X_TEST_TBL1 in the source and I have one GLOGXMLElement ("unbounded") in the destination. I need to map each of the source elements to the same destination. Then internally, I will be mapping the elements of X_TEST_TBL to "Location" segment/element and the elements of "X_TEST_TBL1" to "ItemMaster" segment/element. If I try to use "foreach" and map second
    element "X_TEST_TBL1" also GLOGXMLElement using the foreach, I get the following error -
    http://www-apps.us.oracle.com:1100/~rvishnuv/transform1_error.gif
    Let us say my X_TEST_TBL contians two records and X_TEST_TBL1 contains one record. Is there any way that I can use these two out parameters to map to the same destination (GLOGXMLElement) so that my final document contains multiple "GLOGXMLElement"s that represents data from both the output parameters? i.e. there should be in total of three occurances of GLOGXMLelement in the output document such that two occurances correspond to data obtained from X_TEST_TBL and one corresponds to data from X_TEST_TBL1.
    Please let me know if there is any way to achieve this.
    Thanks
    Ravi

    Is the listed $200 credit towards a trade-in on top of the original trade in value of a phone, or the maximum amount?

  • Question regarding the pen tool (w/ picture inside)

    Hello everyone! I have a question regarding the pen tool. I think this picture is very helpful for my question:
    So in this pic is an orange rectangle and within that rectangle is a blue stripe. I would like the blue stripe to be perfectly flush (not over, and not under) the edge of the rectangle. For example, on the bottom end of the blue stripe, you can clearly see that the stripe does not extend far enough to the edge of the orange rectangle. At the top of the stripe, it goes a little bit over (a bit hard to see). I work with some complex shapes when using the pen tool and it is really slowing me down to compensate for over/under shapes. If it could just snap to the borders of other shapes it would make my life a lot easier. Thanks for reading and please help!

    A couple of thoughts come to mind:
    1.  You could create the shape "face on", using guides, and the points will snap to guides with snap enabled.  Then you could transform the whole thing together by selecting all the shape layers.
    2.  Holding down the shift key while dragging a point seems to cause it to snap to some things under some conditions. However, on having just tried to recreate what you're showing I didn't see the proper snap happening sometimes.
    3.  There's the full manual approach, of course where you zoom into thousands of percent and move the points by hand manually.  I assume this is what you're trying to avoid.
    -Noel

  • I have just got my iPad2 and very pleased with it. I have a question regarding the monthly (recommended) battery full charge.  Should I let the battery completely die down to nothing at all or would this be bad for my iPad?

    I have just got my iPad2 and am very pleased with it. I have a question regarding the monthly (recommended) battery full charge.  Should I let the battery completely die down to nothing at all before I plug in to recharge or would this complete drain be bad for my iPad?

    It's not bad for it - on this page www.apple.com/batteries/ipad.html it says :
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

  • Questions regarding the APEX sample shopping cart

    I am fairly new to APEX development, but had a few questions regarding the sample APEX shopping cart:
    1) is there a way to integrate Google check out payments with the sample APEX shopping cart
    2) is there any way to list a service, that involves monthly recurring payments
    3) is there any other shopping cart that is APEX based that is available
    Thank you,
    Ashok

    Hi Sam,
    i am haveing a deadline monitoring for my shopping cart where remainders are going to generate for first day and the second day, after both the remainders generated and the approver changing the cost center or asset or order at that time, the workflow flow should retrigger and send the approval mail to the new approver, but it is not going to the new approver, so the workflow is not triggering in my case. so i need to restart my workflow again if any changes occurs.
    in the second point my functional guy says that, when the approver changes any text or any date like that it should come for the accept changes, and when he sees the approval preview, only the approval person should be there but not the creator person in the preview and when the creator of the sc accepts the changes it is showing that it is approved by the creator name but he says that it should the approver name not the creator name.
    so can you please help me in this to get the solution.
    thanks in advance

  • Few questions regarding the "Update CMS" button

    Hello,
    Few questions regarding the "Update CMS" button:
    1. When I create new product at the SLD I see it at the add SC table even if I don't click the "Update CMS" button first. If so, when will I use this option?
    2. When I do click the "Update CMS" button it takes it between 30-40 minutes to finish the update. During this time frame the whole development portal (it is sitting on the same WAS as the NWDI) becomes extremely slow. Is this normal response time or do I have a certain performance problem with my server?
    Thank you in advance,
    Roy

    Hello Roy,
    I think that <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/46/6fe3ec58f0477a816b80f182b389e0/frameset.htm">this</a> topic should answer all your questions :).
    Hope that helps!
    Jordan

  • Several Questions Regarding Educational Versions of Software

    Alright, I have several questions regarding eduational software from Adobe.  I will be attending school in the near future (now I am not enrolled in any type of school) and I notice that Adobe has huge discounts on 'educational software'.
    What exactly is the difference between the 'retail' version of a program and an educational version?  Do you need some sort of student ID to activate an educational version, or proof that you're in school, or anything special like that?  I've noticed people selling unopened educational versions on eBay and from what I hear there are no differences between the software, but this makes me wonder... why the price difference?
    Also, I plan on buying another Mac in the near future - probably for school.  My second questions is - with this software (educational), can I put the programs on both my Desktop and my Laptop, or will they only work registered to one person on one computer?  I've heard from people that serial numbers can only be activated so many times.
    Final question.  My hard drive recently crashed, and I lost a good bit of stuff and had to re-install everything.  If this would happen again, can I re-install all of the Adobe programs to a new hard drive?  Or am I going to encounter the whole 'serial numbers can only be activated so many times' thing?
    Okay.  I think that about does it.  Any input would be great.  Thanks.
    -Mike

    In terms of contents, there is normally no real difference between the retail and educational/student editions. There may be some extra fonts or clipart in the retail version, but this varies from release to release and from product to product.
    You must qualify to purchase an educational/student version. Such qualifications are listed on Adobe's website. Normally you must provide proof of such qualification to whoever sells such software licenses to you. You cannot buy now on the basis that you will be a student in the future. You must have the student status at the time of the purchase.
    Unlike retail versions, educational/student versions of Adobe software are not transferable. Sales of such "unopened" software on eBay should be regarded with suspicion. Authorized Adobe resellers do not offer software sales on eBay. The software is either stolen, used (but repackaged), or pirated.
    Most Adobe software, including the Creative Suite software, may be simultaneously activated on up to two computers owned and used by only one individual. The second computer is typically a mobile computer if the first computer is a home computer for students. For retail, typically the first computer is one's office computer and the second computer is a mobile or home computer. The computers are not to be running the software simultaneously. And no, two students can't share a single copy on two separate computers.
    The software may be activated and deactivated but after 20 or so such cycles, you will need to call Adobe and explain what's going on to obtain any additional such cycles. If you are activated on two systems and a disk drive or computer blows out and you need to reinstall the software without having had the ability to deactivate on the blown system, Adobe's activation support group will normally grant you an extra activation, assuming that you don't have a record of abusing the priviledge (such as claiming your disk drive crashes once a month!).
            - Dov

  • Several Questions Regarding the Imac

    Hello everyone.
    I'm on the fence about purchasing a new Imac. I'm interested in a 24" model, potentially with the 2.4 Ghz processor.
    I'm a lifelong Windows user, and like many Windows users, I have some reservations from making the switch over to an Imac. Led by the fact that I'd need to purchase Microsoft Office for Mac ($150) and a screenwriting software ($100) that already runs smoothly on my current XP based Dell tower (it would be an additional computer to authorize the software on, because they limit the number of times you can add it to individual computers. bastards).
    However, after using the 24" Imac at an Apple store, I'm intrigued by the idea of getting one, led by my desires to begin shooting short films/editing them with my Imac.
    I have questions. A whole bunch. But your answers would be greatly, greatly, greatly appreciated. Here goes......
    1. I have an ancient HP Inkjet 932c printer. I believe it's 6 years old. Will I be able to use this printer with my Imac?
    2. How well will Final Cut Pro run on my desired Imac if I upgrade it to 4 GB of RAM? Is it better to upgrade the memory vs. purchasing the 2.8 Ghz Imac?
    3. Is purchasing 4 GB of RAM from Crucial the best way to get the most out of my new computer/using Final Cut? (Certainly much cheaper than doing it via Apple).
    4. Perhaps I'm making myself paranoid by reading through all the forum sections regarding the Imac, but I'm reading a lot of posts regarding internet speed issues using a router. I have a Linksys WRT54GS router. I was planning on using it via an ethernet cable to the Imac. Can anyone confirm or deny that this would be an easy transition?
    5. This is a BIGGIE for me: the glare found on these new screens. My Imac would be located in a room that contains several windows from different sides (shades pulled up during the day). I don't want to have to draw my shades during the day in order to avoid the glare. Do you reckon this will be a major issue in this room?
    6. What is Apple's return policy? If I hold off upgrading the RAM manually, but decide the Imac is not for me (glare issues, internet connection, other reason), can I easily return it? Is there a set amount of time I have to do so?
    7. Someone complained on this forum about this version of the Imac I'm describing as having a "super slow dvd unit". I'm looking to do a lot of video editing and DVD burning. Does the Imac have a relatively slow DVD player/burner/component?
    I know I have a lot of questions, but this is a huge investment for me financially, and I also want to make sure my next home computer purchase is something that can last me a long time (8 - 10 years).
    Your answers are GREATLY appreciated in advance. Thanks!

    Hello, 
    Remember a Mac is a PC so you can get install Windows XP or Vista and continue to make use of your software investments on the Windows side to ease your migration. Personally I do use Microsoft Office (v.X) but there are alternatives out there. Apple's iWork is Office compatible and although very different may do all that you require. Also look at open-source (free) alternatives like NeoOffice (link).
    Just to confirm George's excellent answers:
    1. Mac HP 932 Driver (link).
    2. I've never used FCP but I used to edit video on my iMac G3 400MHz with 256MB RAM back in 1999 so I can't see you'd have any issues on a modern iMac. I do have the 2.8GHz and it breezes through all the video tasks I throw at it. I expect the 2.4GHz would be similar.
    3. Crucial, or OWC or any other reliable Mac-RAM supplier (link).
    4. You should be able to pull the Ethernet from the PC and connect the iMac (or connect both at once).
    5. Difficult to answer. The screens are very shiny. My iMac faces away from the window so I don't notice it. Not sure I'd want a window behind.
    6. Apple's normal policy is a 10% restocking fee if you return the iMac through your choice. I agree with George that you should buy the minimum RAM from Apple. If you did get the 2.8GHz this would mean customizing the iMac which apparently makes returns impossible. Returns Policy.
    7. Most iMac models (including the current batch) use laptop optical drives rather than the fuill size desktop optical drives. This means that the burn speeds are lower. The maximum speed is 8x DVD burn versus the 20x or 18x you'd expect from a desktop drive today. If you do a lot of burning external (desktop size) drives can be had very cheaply.
    The iMac G3 I mentioned above is still going strong after 8 years (it's had RAM and hard disk replacements but only through my choice) although I did have to replace the PRAM battery (£6) to keep it working.
    cheers
    mrtotes

  • Comprehensible question regarding the usage of a ccBPM in SAP PI 7.31

    Hello experts,
    I have got basic question about the useage of ccBPM in PI 7.31 double Stack. I haven't  created any ccBPM before so the whole set up process is new for me. We are currently using several ccBPM already which where created by our colleagues.
    I just have a question about the basic of work of a ccBPM and if the designed process can be realised at all.
    The current process should be implemented, starting from the erp system with a trigger report (left side). All the offered function are provided by the called system (right side)
    So can this whole process can be realised using ccBPM, so that after the trigger report is called the rest of the process is handled within the pi? The process checkStatus needs to be called within a loop and at the end the generated File should be stored on the file system.
    Thanks in advance for clearing my thoughts on this problem guys!
    regards
    Christian

    Hello Christian,
    is this a 1-1 correlation? So you have just one sender system and one target system? It might be better then to implement the flow in your sender system and only call single interfaces on PI. While it is technically possible to do everything in PI there is no real added value to do so. BPM is most benefitial when you need to aggregate information from different sources and when the process contains decisions that lead to alternative process steps.
    Regards,
    Jörg

Maybe you are looking for