By using personalization can we default the values as null in oaf

Hi All,
Can we change the default values to null....
Actually i have from and to date fields....when ever page opens the vales are geting defaulting in that fields...
I need to make this as null....by using personalization is it possible( if yes...need help) or i need to extend the co..
Regards
Harry

Hi Harry,
If the values are defaulting from the "initial value" property it can be set to null by removing those values from personalization, but I feel it will be defaulting from code if it is so, same can not be achieved by personalization.
Regards,
Reetesh Sharma

Similar Messages

Can I set the value of kernel paramaters less than default in Solaris 10?

Can I set the value of kernel paramaters less than default in Solaris 10? If specified less than default values for kernel parameters in /etc/system, system is getting default values for such as SHMMAX, SEMMSL, SEMOPM. Is the default kernel parameter values the minimum values in Solaris 10?
-Yong

Yes, but not through /etc/system.
/etc/system is the old way to do it. As a backward compatibility, it will allow lines there to increase parameters but not decrease them. This is on the theory that many memory defaults were significantly increased, and older /etc/system setups were trying to increase small defaults, not decrease large ones).
Use prctl and set up a project.
Darren

How can we get the value of the key field in a custom data model using governance API?

Dear Team,
How can we get the value of the key field in a custom data model, to be used for manipulation of the change request fields using governance API?
Any kind of help would be sincerely appreciated.
Thanks & Regards,
Tushar.

Hi Michael,
Thanks for direction. Let me give more context on this as I'm interested to get more details..One of the issue was to read cross entity field values on UI based on user action and set other entity field behaviour...It is similar to what is being posted here.
For ex: Reading MTART from Basic Data UIBB in MM MDG UI and set the field properties in some other custom entities say ZZETEST. This cannot be done using UI BADI as it only supports single entity at a time and not cross entity. So alternatively we found a solution where we can enhance existing PLMB feederclass cl_mdg_bs_mat_feeder_form by reading the model and the entity as needed as it it proved that it supports cross entity UI field behaviours and so business requirements.
This is a workaround for now.
So the question is How do we achive it using governance API for cross entity field behiaviours.?or what is the right way doing this.
Can we do that using governance API and its' methods?
In the Governance API doc you provided below has referring to below external model as part of gevernance API.
The active or inactive data (before or during the derivation or the check) can be read
with the external data model interface IF_USMD_MODEL_EXT with the method READ_CHAR_VALUE and
the corresponding READ_MODE parameter. To avoid unnecessary flushes (derivations), the NO_FLUSH
parameter should b
e set to ‘X’.
Thanks
Praveen

How can i get the value stored in the session object using its sessionid

how can i get the value stored in the session object using its sessionid by running stand alone java application

myforum wrote:
how can i get the value stored in the session object using its sessionid by running stand alone java applicationThis does not seem to make sense! You need at least to give a lot more detail of what you are doing.

How can I change the value used in a Criteria Rule in a Subscription agent

Dear mobile heroes.... How can I change the value used in a Criteria Rule in a Subscription agent in a quality environment? (CRM 70 SP04).
I have built a subscription agent in dev, which uses a static where clause to filter activity_object on VKORG. I need to filter on a different VKORG value in the quality environment, but when I change the value of the sales org, the change is not saved. I have tried this even non 'activated' subscription agents, but it still does not appear possible to change and save the changes.
This poses a big problem because the VKORG value I want to use does not even exist in the dev environment, so I could not even rebuild in dev and transport the new agent to quality. Can anyone help me?

Too old to care now.

How do I default the value in an LOV?

Dear experts,
What I am trying to achieve is changing the default value in an LOV, based on the value of another field. I have an LOV that lists employee names. There is another field, an account number, which when selected is used to determine the default employee set against this account. This employee I want to use to add into the LOV as a default the value, before the user selects a value in the LOV. The user can still invoke the LOV and search for a different employee, but the functionality I am concered with is setting this default employee.
I have modified the ProcessForm in the associated controller class. I have obtained the account number and using an SQL query I have obtained the default employer, but I can not seem to set this value in the LOV as a default. Does any one have any ideas?
For the LOV there are two criteria values in the LOV mapping, the org id and the code combination id, both used in the query to get the default employee.
Many thanks for your assistance in advance.
Mark

Hi,
IF want use dependent lov ..then refer below link..
http://oracleanil.blogspot.com/2010/12/dependent-lov-in-oaf.html
Or
IF u want set any default value in lov2 when value selecetd in lov1...
Get the event of the lov1 on PFR..
if("LOv1ID").equals(pageContext.getParameter(SOURCE_PARAM))
&& ("lovUpdate".equals(pageConext.getParameter(EVENT_PARAM))
|| "lovValidate".equals(pageConext.getParameter(EVENT_PARAM))))
Here try set default value as given by Gyan...
Pls check syntax errors...
Regards
Meher Irk

How can I reset the value of an array?

How can I reset the value of an array at the beginning of my program?

There is a option in LV,
"Edit --> Make current value defult"
Every time you reopen your VI, it will set to your custom default value.
There are many ways of doing this.
Another way of doing this is, You can use "sequence structure and property node". Make the property node of your array and choose "value". Then mark it to write. See attach.
When you feel sad, laugh
Attachments:
x.GIF ‏4 KB

Ship Confirm Tab: How to default the values?

Hi!
I am trying to determine if there is a way for me to default the various options on the Ship Confirm screen. ie When I ship confirm a window opens and I can choose if I want to backorder any quantity and what to do with left over quantity? Can I default these values?
Thanks much

Yes, you can do this thru the SYSTEM ADMINISTRATOR responsibilities. Query the Ship Confrim concurrent program and use the parameter window to default a values.

How can i pass the value one from to another form?

hi all
how can i pass the value one from to another form with out use it when ever i want to needed this value that ican useit?
like i have two fields U_test1 and U_test2 table name @AUSR
that i have four form A! , A2,A3,A4 please tell me in details....?

Hi,
U can assign the values to some variables and access then in ur required forms.
Vasu Natari.

How can I receive the value of a selected item in the backing bean

I have a table in a jspx file.
When I go to the detail page I want to do something with the value of the currentrow.
I want do a calculaction of the value of ClbId.
How can I receive the value of the selected ClbId in my backing bean
<af:table value="#{bindings.Searchteamlist.collectionModel}"
var="row" rows="#{bindings.Searchteamlist.rangeSize}"
first="#{bindings.Searchteamlist.rangeStart}"
emptyText="#{bindings.Searchteamlist.viewable ? 'No rows yet.' : 'Access Denied.'}"
selectionState="#{bindings.Searchteamlist.collectionModel.selectedRow}"
selectionListener="#{bindings.Searchteamlist.collectionModel.makeCurrent}"
rendered="#{backing_FirstFlag_Club_Club.searchFirstTimeClub_Club_AdresAndereClubs == false}">
<af:column sortProperty="Matricule" sortable="true"
headerText="#{bindings.Searchteamlist.labels.Matricule}">
<af:outputText value="#{row.Matricule}"/>
</af:column>
<af:column sortProperty="ClbId" sortable="true"
headerText="#{bindings.Searchteamlist.labels.ClbId}">
<af:outputText value="#{row.ClbId}">
<f:convertNumber groupingUsed="false"
pattern="#{bindings.Searchteamlist.formats.ClbId}"/>
</af:outputText>
</af:column>
<af:column sortProperty="Nom" sortable="true"
headerText="#{bindings.Searchteamlist.labels.Nom}">
<af:outputText value="#{row.Nom}"/>
</af:column>
<f:facet name="selection">
<af:tableSelectOne text="Select and">
<af:commandButton text="Submit"
action="club_AdresAndereClubsDetail">
<af:setActionListener from="#{row}"
to="#{processScope.row}"/>
</af:commandButton>
</af:tableSelectOne>
</f:facet>
</af:table>

hi tde
Using an Expression Language helper class like this one from Steve Muench ...
http://radio.weblogs.com/0118231/stories/2006/12/18/sourceForMyFavoriteElHelperClass.html
... you could write something like this in your backing bean:
Integer vClbId = (Integer)EL.get("#{row.ClbId}");(Make sure to cast it to the correct type.)
success
Jan Vervecken

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

How can I obtain the value of a database column in a JSP variable ?

How can I obtain the value of a table column in a JSP variable?
For example the <jbo:ShowValue datasource="cl" dataitem="Cont" ></jbo:ShowValue>
I need to have it in a variable like this:
<% String cnt=<jbo:ShowValue datasource="cl" dataitem="Cont" ></jbo:ShowValue>; %>
But it is not workig this way.
Please help me to obtain the value.
I am using JDev RC2.
Thanks.

Try something like
String cnt = c1.getRowSet().getCurrentRow().getAttribute("Cont").toString();
-A
How can I obtain the value of a table column in a JSP variable?
For example the <jbo:ShowValue datasource="cl" dataitem="Cont" ></jbo:ShowValue>
I need to have it in a variable like this:
<% String cnt=<jbo:ShowValue datasource="cl" dataitem="Cont" ></jbo:ShowValue>; %>
But it is not workig this way.
Please help me to obtain the value.
I am using JDev RC2.
Thanks.

Can I set the value of a list binding in my managed bean?

Dear All,
This is just an exercise for me and I just wanted to experiment on the bindings of ADF for me to understand it further.
I wanted to create a custom Model Driven LOV with my data control listed below
Countries
     -CountryId
     -CountryName..but I wanted to display the label similar to this
1 - USA
2 - England
n - France..so I thought of manipulating the select items in a bean
<af:selectOneChoice id="soc1" value="#{bindings.Countries.inputValue}">
<f:selectItems value="#{pageFlowScope.MyBean.countries}" id="si1" valuePassThru="true"/>
</af:selectOneChoice>..and the code similar to this
public class MyBean{
     public List<SelectItem> getCountries(){
          //countryMap points to accessing the iterator binding
          //BindingsHelper is a utility class that sets the value
          for(...){
               SelectItem item = new SelectItem();
               item.setLabel(countryMap.get("CountryId") + " - " + countryMap.get("CountryName"));
               item.setValue(countryMap.get("CountryId"));
               list.add(item);
          //set the item to the first row
          BindingsHelper.setExpressionValue("#{bindings.Countries.inputValue}",
                                 list.get(0).getValue());
          return list;
}...on the last part I wanted to set the value to the first item but I am encountering numberformatexception when setting the list binding.
I know I can do this declaratively also by removing the unselected item but as I have said I am experimenting on the bindings.
Is this not possible?
Thanks.
JDev 11G PS5

Hi ,
I understand that , you want to show select one choice (dropdown) with label (countyid - country name) and value is (countryid).
and these informnation is coming from ADf Model ( may be a VO).
in the UI page you used this list is coming from MyBean
<af:selectOneChoice id="soc1" value="#{bindings.Countries.inputValue}">
<f:selectItems value="#{pageFlowScope.MyBean.countries}" id="si1" valuePassThru="true"/>
</af:selectOneChoice>
so ,
The Managed Bean code should be ,
private List<SelectItem> countries;
///setter method
public void setCountries(List<SelectItem> countries) {
this.countries= countries;
// getter method
public List<SelectItem> getQuoteStatusList() {
quoteStatusList =
selectItemsForIterator("countriesVOIterator",
"countryId", "countryName");
return quoteStatusList;
public static List<SelectItem> selectItemsForIterator(String iteratorName, String valueAttrName, String displayAttrName) {
return selectItemsForIterator(findIterator(iteratorName), valueAttrName, displayAttrName);
public static DCIteratorBinding findIterator(String name) {
DCIteratorBinding iter = getDCBindingContainer().findIteratorBinding(name);
if (iter == null) {
throw new RuntimeException("Iterator '" + name + "' not found");
return iter;
public static List<SelectItem> selectItemsForIterator(DCIteratorBinding iter, String valueAttrName, String displayAttrName) {
List<SelectItem> selectItems = new ArrayList<SelectItem>();
for (Row r : iter.getAllRowsInRange()) {
string labelValue = (String)r.getAttribute(valueAttrName) +"-"+ (String)r.getAttribute(displayAttrName);
selectItems.add(new SelectItem(r.getAttribute(valueAttrName),labelValue ));
return selectItems;
this will give you what you except in the ui
when you try to get the value form that seclecOneChoice value in MyBean what user selects , you can simply get the value of this selectOneChoice.

Can you change the value of a variable that is reset by a parameter?

Sorry if this is simple but I just crashed a package and can't do an autopsy. I suspect I sent it into an infinite loop. I know you can't change the value of any passed in parameters. What I tried to do was have the parameter set the value of a variable
and then I tried to change the value of the variable. Is that even allowed?
I was trying to do this:
MyCheckVariable = MyParameter (which equals true)
(some cool stuff happens)
MyCheckVariable = False
I hit F5 and my package turned into the Energizer Bunny. Is the way I try to reset the variable the culprit?

This is a prototype so I just created a project parameter and set it to true. In the real world the parameter will be used to control an optional part of the process because on a re-run after error that part doesn't have to be ran again.
So when I say MyCheckVariable = MyParameter (which equals true) in reality what I actually have is in the variables window I'm using an expression and it looks like this in the variables window
name = runDownload
Scope = Package
Data Type = Boolean
Value = True (but greyed out)
Expression = @[$Project::param_runDownload]

How to default the value in Parameter ?

Hi all,
How am I going to default the paramenter say I have the From Item >= '0' and To Item <= '99999999', I will like system to be defaulted back the value in the parameter everytime when the refresh is being pressed ?
Currently, I have set the default value in the parameter, it work fine for the very first time, but after I have put the search value in the refresh button, the system still showing the old value which I have keyed in earlier. I want system to be defaulted the value that I keyed in the parameter. How to do that ?
Rgds
Lim

Hi Lim
Are you using Discoverer Plus?
If so, there is a preference in pref.txt that controls whether the parameter values are saved with the workbook. It is called SaveLastUsedParamValue. This has two settings as follows:
0 - Use the default value as set by the report writer
1 - Save the value the user just entered and use that as the default the next time
Best wishes
Michael

By using personalization can we default the values as null in oaf

Similar Messages

Maybe you are looking for