Cal year / Month is not populating correctly in Bex report

Hi Experts,
We have a bex query on virtual provider with only one column in it i.e 'cal year / month'. I'm having the problem with this column.
In the excel output of this report the cal year /month is displaying in this sequence.
01/0000     02/0000     03/0000     04/0000     05/0000     06/0000     07/0000     08/0000     09/0000     08/2008     09/2008     10/2008     11/2008     12/2008     01/2009     02/2009     03/2009     04/2009     05/2009     03/2010     04/2010     05/2010     06/2010     07/2010     08/2010     09/2010     10/2010     11/2010     12/2010     01/2011     02/2011     03/2011     04/2011     05/2011     06/2011     07/2011     08/2011     09/2011     10/2011     11/2011     12/2011     01/2012     02/2012     03/2012     04/2012     05/2012     06/2012     07/2012     08/2012
I'm not getting why the first 9 columns its displaying as 01/0000     02/0000     03/0000     04/0000     05/0000     06/0000     07/0000     08/0000     09/0000     .
It should display as
08/2008     09/2008     10/2008     11/2008     12/2008     01/2009     02/2009     03/2009     04/2009     05/2009
06/2009        07/2009        08/2009         09/2009         10/2009        11/2009        12/2009        01/2010         02/2010         03/2010     04/2010     05/2010     06/2010     07/2010     08/2010     09/2010     10/2010     11/2010     12/2010     01/2011     02/2011     03/2011     04/2011     05/2011     06/2011     07/2011     08/2011     09/2011     10/2011     11/2011     12/2011     01/2012     02/2012     03/2012     04/2012     05/2012     06/2012     07/2012     08/2012
My data source is fetching the correct data including this cal year/ month.
Thanks in advance for your help.
Regards,
Brahma Reddy

It seems there are some records of "cal year/month" with value 01/0000 02/0000 03/0000 04/0000 05/0000 06/0000 07/0000 08/0000 09/0000
2 possible solution:
1) Check the data again, you may simply filter them by restrict the cal year/month to the specific value (01/0000)
2) restrict the cal year/month, only allow 2008/8 + value in the result.

Similar Messages

Net value in the Invoice not populated correctly

Hi friends,
The net value in the Invoice is not populated correctly. The sales order unit price is say 100/EA and the qty is 10 and the net value is 1000 Rs. THe invoice is also showing up the unit price and qty similar to the sales order but the net value picked is 500Rs. There are no discount conditions as well. What might be the possible reasons for this?
Thanks
Isaac

Hi,
Check whether you have entered th value manually in the sales order and overwritten the condition record value .If so also check you copy control setting in VTFL that pricing type B is maintained at item level for the respective doc type .
It can happen that you have condition record maintained for 50rs per quantity and you have changed price manually in sales order to 100 per qty. Now if in copy control VTFL pricing type B is maintained than system will redetermine the prices at the billing level.
If this is the case than change the settings in VTFL pricing type at item level to D
Please check and revert with your feed back
Regards,
Krishna O

CopyDeliverToOrgId is not populated correctly when checkout PR in iPro

When we check out the Requisition in iProcurement, the system shows error for the Deliver-To Location, the error is 'Select a Valid Value'. After we click on the LOV and select the same value as in the Deliver-To Location field , the error gone.
Setp.
1. Select item and add to cart
2. Click View Cart and Check Out
3. Click Checkout
4. Click Next (at this point the Deliver-To Location values is PWH-MB-03-TA)
5. Error out 'Select a Valid Value'
6. Click LOV and select PWH-MB-03-TA from the LOV
7. Clikc Next again
8. Success
Do anyone knows why I have to reselect the value every time I check the requisition
One of the metalink note mention that the variable copyDeliverToOrgId is not populated correctly.
Thanks in advance for the help
Lawrence

Is any personalization already exists , some like it will be based on OU with certain location ..
In my case , it was to enter correct Deliver to location was based on requestor -location combination based on OU.
otherwise check for Profile 'POR : Preferences - Deliver to Location' in system admin ,
select * from fnd_profile_options_tl
where profile_option_name = 'POR_DEFAULT_DELIVER_TO_LOCATION_ID'
and language='US'
Regards,
Ashish

Why is repeated events not populating correctly?

I am trying to set up a repeating event at icloud.com and it is not populating correctly. I set up a custom repeating event to repeat every two weeks on certain days and it shows up every week regardless that I selected repeat every "2" weeks"

If known-good battery,
& known-good adapter;
check Mag-safe Board.
http://www.ifixit.com/Device/Mac_Laptop
http://www.ifixit.com/Device/Apple_AC_Adapter
Good luck & happy computing!

Cal.Year/ Month - Applet - MM.YYYY and HTML- MMM.YYYY

Hi All.
I have created Webi Report on top of Bex Query.
While running the webi report Cal.Year/ Month Prompts list of vales showing format as MM.YYYY (01.2014) in Applet version.
and running the same report with HTML version, Cal.Year/ Month Prompts list of vales showing different format as MMM.YYYY (Jan.2014).
I have checked at bex Q level Cal.Year/ Month variable have List of values MM.YYYY (01.2014) format.
Cal.Year/ Month - @
Bex Q : MM YYYY
Applet - MM.YYYY
HTML- MMM.YYYY
Need to understand same report Cal.Year/ Month Prompts list of vales showing different format (Applet - MM.YYYY. HTML- MMM.YYYY).
is there any way to fix the issue display same format in the both version.

Hi Sateesh,
Thanks for reply.
Are you using Unv /BICS ? BICS
Did you checked both applet and HTML version with the same user ? Yes, Same user
HTML and Applet version report pointed to same BO and BW system ? Yes, Both BO and BW systems are same. (development systems)
In BEx , variable values shows both text and key and when value selected it only show key in the entry field box .- Yes, bex variable and characteristic defined display as KEY.
I have created Cal.Year/ Month Prompts at webi level….while refresh the report. Cal.Year/ Month Prompts list of vales showing different format (Applet -MM.YYYY (01.2014). HTML- MMM.YYYY (Jan.2014)).

Discount Value - 0RPA_REA Not Populating Correctly in Multiprovider ZXX_XX01

Hi Gurus,
Discount Value - 0RPA_REA Not Populating Correctly in Multiprovider ZXX_XX01,
As you aware discount value (0RPA_REA) has Positive values correspond to a reduced sales value. Negative values correspond to a markup on the sales value.
Item discounts are already taken into account in the sales value. Discounts at POS transaction level (header discounts) are only taken into account at the point of processing.
This key figure is supplied by the Data Sources 0RT_PA_TRAN_CONTROL and 0RT_PA_TRAN_TOTALS and is filled by PIPE field REDUCTIONAMOUNT.
Can some one let me know how to achieve the correct discount type from POSDM?
Thanks and Regards,
Ramesh D

Hi Ramesh,
As Vikrant mentioned the discount values are shown against record qualifier 1101 in 2 instances in your snapshot.Please check the receipt/MON0 and compare the discount values.
Alternately pick anyother transaction which has maximum no of discounts and compare in RSA7.
You may also Import/Export this transaction and verify in any other environment(DEV/TEST) etc to see the results are matching.If not matching, then possibly,some of the config TRs may be missing in PROD.
Hope it helps.
Best Regards,
Aram.

Newly added Cal.View Measure does not appear in the BEX Designer

Hi,
anybody come about this :
A newly added Cal.View Measure does not appear in the BEX Designer:
I got a runnig query in Bex Designer, based on a transient InfoProvider which is based on a HANA Calculation View
and
added a new measure to the Calculation View
and
added a Reference InfoObject in the Publisher to the (transient) InfoProvider.
and
see the newly added filed in the Listccube of the(transient) InfoProvider with a technical generated name
and do not
get the newly added measure in the BEX Designer.
Whats wrong ? What needs to be done ?
Thank You
Martin

Hi Martin,
Are you trying to consume the HANA Calc View in BEx Front End Tool - Query Designer.Could you also check the data preview of the Calc View shows the newly added Measure.Check the definition of Calc View under SYS_BIC schema ->Column Views.
Rgds,
Murali

Tabular form LOV's not populating correctly on edit from report

My form has four LOV's and several text fields. Two of the LOV's will not populate (contains null value) from the report when i try to edit the row, however the other two Lov's populate correctly. Any ideas why i can't get the lov's to populate with the correct value from the report?
each LOV is set to display null value as -- choose value -- with no return value. when i click edit from the report the form (page 2) comes up with the corresponding values from the report, but as i stated two of the LOV's contain -- choose value -- instead of the correct value from the corresponding reports row. All four LOV's items are set exactly the same 2 being static and 2 dynamic; one of each not populating right.
any help would be greatly appreciated.

Hi
I've not used popup lovs in tabular forms for a few years now, but if your using the apex_item's to generate your tab form then I think you need to allow an idx number for the pass back value. e.g. (I have left idx value 2 for the pass back value)
SELECT
APEX_ITEM.POPUPKEY_FROM_LOV (1,deptno,'DEPT') dt,
APEX_HIDDEN(3, EMPNO) en
FROM emp
I hope that helps
Shunt

Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Customer Exit Variable on Cal Year/Month Error

Hi Experts
My requirment is to develop a Restricted Keyfigure...
The restriction is based on 0Calmonth (Calendar Year/Month)
The sales from beginning of calendar year up to last "closed" month in a Calendar.
Ex: in June i want to see 01.01.2009 to 31.05.2009 data.
in October i want to see 01.01.2009 to 30.09.2009 data.
When user execute the report
in Jan 2010 i want to see 0 as there is no closed month in that particular year.
in Fed 2010 i want to see 01.01.2010 to 31.01.2010 data.
For that purpose i created a variable
Customer Exit on calendar Year/Month
Variable represents : Interval
Variable is : Mandatory
Variable is Ready for Input (Uncheck)
in CMOD...i had written The below Code
WHEN 'ZYCCM' . "Current Year Culm. to Last Closed Month
DATA :Month(2) type c,
Start_Month like rsd_c_timnm-calmonth,
End_Month like rsd_c_timnm-calmonth.
Month = sy-datum+4(2).
if Month = '01'.
Start_Month = '000000'.
End_Month = '000000'.
Else.
concatenate sy-datum(4)'01' into Start_Month.
End_Month = sy-datum(6) - 1.
Endif.
CLEAR L_S_RANGE.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
L_S_RANGE-LOW = Start_Month.
L_S_RANGE-HIGH = End_Month.
When i execute the report i am getting an error
"No Value Could be determined for Variable ZYCCM"
Please update what went wrong and how to Correct error

Hi
Thanks for the update..
Modified code as below
WHEN 'ZYCCM' . "Current Year Culm. to Last Closed Month
DATA :Month(2) type c,
Start_Month like rsd_c_timnm-calmonth,
End_Month like rsd_c_timnm-calmonth.
Month = sy-datum+4(2).
if Month = '01'.
Start_Month = '000000'.
End_Month = '000000'.
Else.
concatenate sy-datum(4)'01' into Start_Month.
End_Month = sy-datum(6) - 1.
Endif.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = Start_Month.
L_S_RANGE-HIGH = End_Month.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND l_s_range TO e_t_range.
But when i executed the report....the report is executed sucessfully but the restriction applied to only Jan 2009
When i saw the KF definition in RSRT
I EQ JAN 2009
I am expecting
BT JAN2009 APRIL2009
Please help
Tahnks

Life in months is not populating from interface in Mass Additions Post

Hi,
We have one critical issue in FA conversion.We have popultaed the life_in_months in fa_mass_additions table.When we run the Mass Additions Post,it is defaulting the life_in_months from category and not from fa_mass_additions interface table.As per intended functionality,it should populate from interface table.
If any of you encounter the issue,Please let me know the soultinon.
Thnaks
Praveen

>
DATA showing on front end,but it is not populating into base table AP_INVOICE_DISTRIBUTIONS_ALL.
>
Are you saying you can see the distributions from front end but not in the table?
Did you populate the distribution related columns in AP_INVOICE_LINES_INTERFACE (e.g. DIST_CODE_COMBINATION_ID)?
Sandeep Gandhi

BP Balance not showing correctly in Aging report

Good Day all B1 experts,
We are converting to SAP B1 for fiscal year 2010 and earlier today I have found a problem with BP balance on the AR side. Below is a summary of the problem:
Problem:
- For some BP, after I entered opening balances, their total outstanding AR balance was not reflected in the Aging report, nor can be found in the Opening Balance window (under System Initialization).
- However, A/R control General Ledger account is correct and ties to my Year End 2009 Financial Statements
Attempted Solution:
- I reentered the "missing" opening balance for those BP accounts. After entering the numbers, however, the Aging report shows a DOUBLED amount of the correct balance. And when I go check the Opening Balance window, the system is showing the correct BP balance (NOT Doubled).
- Now my A/R control General Ledger and Opening Balance General Ledger Account is out of balance as well. The difference equals to the amount I reentered.
Has anyone encountered similar problem before? I cannot think of anything I did to cause such mess. In any case, I am wondering if I need to use the Restore BP function.
Please provide me some guidance on this. Thanks!!!
BR,
Sunny

Good Morning Kerstin,
Thank you for the article. The version that we are using is 2007A (8.00.180) SP:00 PL:45
In the article, it mentioned about the Single Reconciliation Engine. Do you know if that tool comes along with previous upgrades, or we will have to download and install it?
Actually it seems for one of those problem BP accounts, the correct balance is reflecting on the Aging Report after an invoice was issued yesterday. However, its BP balance is still not correctly reflecting elsewhere (such as Incoming Payment under banking module.)
Regards,
Sunny

Characteristic attribute does not show correctly on BEx Web Analyzer

Hello everyone!
I'm working on a report in BEx Web Analyzer wich has the characteristic 0EMPLOYEE. When I call the context menu for this characteristic and select properties, I get a list of it's attributes. I select one of them for display.
The problem is, the value shown is not the correct one. It's an "old" value.
I change the employee's attribute in R/3 via PA30;
I succesfully update the change in BW (0EMPLOYEE master data);
The value shown is the previous one.
Is there any buffer between the BW system and a BEx Web Analyzer query wich I need to force-clear in order to see the correct data?
Best Regards,
Luís Andrade.

Thanks for your response!
It was a buffer issue. I solved it by simply refreshing the query with different selection conditions to force the system to read data from the BW system.
Best Regards,

Kazakh characters not shown correctly in BO reports

Context :
While doing a project in KZ we make use of Business objects (BO XI R3 SP1) to generate reporting.
The language used for the reporting is Russian, but some client identification data of the company, which contains Kazakh characters, should be shown in the reports.
Problem :
KZ characters are not shown correctly in the BO reports (majority of time '?' is shown)
Details :
As I understand BO doesn't support the KZ language. We get the following message (CS : invalid native charset).
NLS_LANG : Russian : .CL8MSWIN1251 --> works
NLS_LANG : Kazakh : .CL8RK1048 --> not supported by BO. (This is though supported by the Oracle client and functions when we use SQL Plus)
Is there a workaround available to show KZ characters correctly in BO ?
Thanks

See my comments in this post:
client_get_file_name do not go to specified folder

ME2L : still to be delivered is not displayed correctly in ALV report

Dear All,
The still to be delivered and still to be invoiced quantity is not being displayed correctly in ME2L report. In BEST format the report displayes the correct values. In the ALV form the quantity is same as the ordered quantity.
can anyone he

If the selection is the same for BEST layout and ALV layout then the results should equal.
if a field in ALV display has a different value than in the old list display, then it pretty much looks like a bug, and bugs can only be erased by program changes from SAP via OSS notes.
Check SAPNet for notes, open a message yourself to SAP if you dont find any.

Cal year / Month is not populating correctly in Bex report

Similar Messages

Maybe you are looking for