Calcualtion methods in AA

Hi all guru's
what is the use of calcuation methods??
1. base methods, declining balance method, maximum amt method, multlevel method, maintain periode control method???
why it assing to one depreciation key??
could you explain me???
regards
ss

Hi Supriya,
All will be used to calculate depreciation on particular Asset
Base method: Base method of the depreciation key for calculating depreciation or imputed interest.
Declining Balacne method:
A multiplication factor for determining the depreciation percentage rate
An upper limit for the depreciation percentage rate
A lower limit for the depreciation percentage rate
Multilevel Method:
Each level represents a validity period for a given percentage rate.
Maintain Period control Method:
Assign period control keys to the period control methods for:
Acquisition transactions
Subsequent acquisitions
Retirements and transfers
And so on
Best Regards
Ashish Jain
Message was edited by:
Ashish Bohara

Similar Messages

Need help pulling data from an outside file into my array. Please help =)

Hi,
I need help adapting my array to read the interest rates from an outside file. Here is my code and the outside file I wrote. Please help. Oh, the array in question is on line 259, inside of my calculation() method.
Thanks...
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.text.NumberFormat;
import java.text.DecimalFormat;
import java.io.*;
import javax.swing.JOptionPane;
public class Workshop5 extends JFrame implements ActionListener
     //declare gui components
     //declare labels
     JPanel contentPane = new JPanel();
     JPanel graphPane = new JPanel();
    JLabel instructionLabel = new JLabel();
    JLabel amountLabel = new JLabel();
     JLabel orLabel = new JLabel();
     JLabel comboBoxLabel = new JLabel();
     JLabel termLabel = new JLabel();
     JLabel rateLabel = new JLabel();
     JLabel calcLabel = new JLabel();
     JLabel paymentLabel = new JLabel();
     JLabel tableLabel = new JLabel();
     //declare font object
     Font labelFont = new Font("Tahoma", Font.PLAIN, 16);
     //declare text fields
     JTextField amountField = new JTextField(20);
     JTextField termField = new JTextField(20);
     JTextField rateField = new JTextField(20);
     JTextField paymentField= new JTextField(20);
     //declare combo box for loan selection
     JComboBox comboBox = new JComboBox();
    //declare button group and radio buttons
    ButtonGroup buttonGroup = new ButtonGroup();
    JRadioButton enterRadioButton = new JRadioButton("Enter amount, term, & rate", true);
    JRadioButton selectRadioButton = new JRadioButton("Select a preset term/rate loan", false);
     //declare button objects
     JButton clearButton = new JButton();
    JButton calcButton = new JButton();
    JButton quitButton = new JButton();
     //declare text area for amortization
     JTextArea amortTextArea = new JTextArea();
     JTextArea testTextArea = new JTextArea();
     //declare scroll bar for amortization table
     JScrollPane scrollPane = new JScrollPane(amortTextArea,ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED);
     public Workshop5()
          instructionLabel.setText("Choose one of the following payment calculation options:");
          instructionLabel.setFont(new Font("Tahoma",Font.PLAIN,16));
          //adds both buttons to button group
          buttonGroup.add(enterRadioButton);
          buttonGroup.add(selectRadioButton);
          enterRadioButton.setFont(labelFont);
          enterRadioButton.setBackground(Color.WHITE);
          enterRadioButton.setContentAreaFilled(false);
         enterRadioButton.addActionListener(this); //adds action listener to enter radio button
          orLabel.setText("OR");
          orLabel.setFont(new Font("Tahoma",Font.BOLD,18));
          selectRadioButton.setFont(labelFont);
          selectRadioButton.setBackground(Color.WHITE);
          selectRadioButton.setContentAreaFilled(false);
          selectRadioButton.addActionListener(this); //adds action listener to select radio button
          amountLabel.setText("Enter mortgage amount");
          amountLabel.setFont(new Font("Tahoma", Font.PLAIN,16));
          amountField.requestFocusInWindow();
          termLabel.setText("Enter term length in years:");
          termLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
          rateLabel.setText("Enter interest rate:");
         rateLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
            comboBoxLabel.setText("Select a loan:");
         comboBoxLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
         comboBox.setBackground(new Color(255,255,255));
         comboBox.setFont(new Font("Tahoma", Font.PLAIN, 14));
         comboBox.setEnabled(false);
         ComboBox();
          calcLabel.setText("Press Calculate button to determine monthly payment.");
         calcLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
         calcButton.setText("Calculate");
         calcButton.setFont(new Font("Tahoma", Font.BOLD, 14));
         calcButton.addActionListener(this);
            //define monthly payment label
         paymentLabel.setText("Monthly payment:");
         paymentLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
         //define monthly payment text field
         paymentField.setFont(new Font("Tahoma", Font.BOLD,16));
         paymentField.setBackground(new Color(255,255,255));
         paymentField.setEditable(false);
          //define clear button
          clearButton.setText("Clear");
          clearButton.setFont(new Font("Tahoma", Font.BOLD,14));
          clearButton.addActionListener(this);
          //define quit button
          quitButton.setText("Quit");
          quitButton.setFont(new Font("Tahoma", Font.BOLD,14));
          quitButton.addActionListener(this);
          tableLabel.setText("Amoritization Table");
          tableLabel.setFont(new Font("Tahoma", Font.BOLD, 16));
          graphPane.setBackground(Color.WHITE);
          //add components to content
          getContentPane().add(contentPane);
          contentPane.setLayout(null);
          addComponent(contentPane, instructionLabel, 80,10,450,26);
          addComponent(contentPane, enterRadioButton, 30,40,220,30);
          addComponent(contentPane, orLabel, 280,40,100,30);
          addComponent(contentPane, selectRadioButton, 335,40,350,30);
          addComponent(contentPane, amountLabel, 100,80,220,26);
          addComponent(contentPane, amountField, 300,80,150,26);
          addComponent(contentPane, termLabel, 15,125,200,30);
          addComponent(contentPane, termField, 195,125,125,30);
          addComponent(contentPane, rateLabel, 62,160,200,30);
          addComponent(contentPane, rateField, 195,165,125,30);
          addComponent(contentPane, comboBoxLabel, 400,125,200,26);
          addComponent(contentPane, comboBox, 400,155,150,30);
          addComponent(contentPane, calcLabel, 100,200,400,30);
          addComponent(contentPane, calcButton, 250,240,100,30);
          addComponent(contentPane, paymentLabel, 150,285,200,30);
          addComponent(contentPane, paymentField, 300,285,100,30);
          addComponent(contentPane, clearButton, 100,330,100,30);
          addComponent(contentPane, quitButton, 400,330,100,30);
          addComponent(contentPane, tableLabel, 200,370,300,26);
          addComponent(contentPane, scrollPane, 10,400,450,360);
          addComponent(contentPane, graphPane, 475,400,305,360);
          //add window listener to close window when user presses X
          addWindowListener(new WindowAdapter()
               public void windowClosing(WindowEvent e)
                    System.exit(0);
         pack();
     //method to add components
     private void addComponent(Container container, Component c, int x, int y, int width, int height)
          c.setBounds(x, y, width, height);
          container.add(c);
     //action performed method
     public void actionPerformed(ActionEvent event)
          Object source = event.getSource();
          if (source == calcButton)
               Calculate();
          if (source == clearButton)
               Clear();
          if (source == quitButton)
               Exit();
          //defines active area based on user selection of mortgage calculation method
           //if user chooses to enter the mortgage manually, combo box fields are inactive
           if (source == enterRadioButton)
                comboBox.setEnabled(false);
                termField.setEnabled(true);
             termField.setEditable(true);
             rateField.setEnabled(true);
             rateField.setEditable(true);
             amountField.setText("");
               amountField.requestFocusInWindow();
               termField.setText("");
              rateField.setText("");
              paymentField.setText("");
              amortTextArea.setText("");
          //if user chooses to select from a preset mortgage, rate and term fields are inactive
          if (source == selectRadioButton)
               comboBox.setEnabled(true);
               termField.setEnabled(false);
               termField.setEditable(false);
               rateField.setEnabled(false);
               rateField.setEditable(false);
               amountField.setText("");
               amountField.requestFocusInWindow();
               termField.setText("");
               rateField.setText("");
               paymentField.setText("");
               amortTextArea.setText("");
     }//end of action performed method
     //combo box method
      public void ComboBox()
           String[] LoanArray = {" 7 years at 5.35 %", " 15 years at 5.50 %", " 30 years at 5.75 %"};
           for (int i = 0; i < LoanArray.length; i++)
                comboBox.addItem(LoanArray);
     }//end combo box method
     //calculation method
     void Calculate()
          //resets fields
          paymentField.setText("");
     amortTextArea.setText("");
          //calculation variables
     NumberFormat currency = NumberFormat.getCurrencyInstance();
          int [] termArray = {7, 15, 30};                               //array of years
               double [] yearlyInterestArray = {5.35, 5.5, 5.75};           //array of interest
               int totalMonths = 0;                                    //total months
               double Loan = 0.0;                               //amount of loan
               double MonthlyInterest = 0.0;                               //monthly interest rate
               double Payment = 0.0;                               //calculate payment
               double monthlyPayment = 0.0;                                   //calculate monthly payment
               double Interest = 0.0;                                              //variable for Interest Array input
               int Term = 0;                                              //variable for Term Array input
               double NewMonthlyInterest = 0.0;                               //new interest amount
               double NewLoan = 0.0;                               //new loan amount
               double Reduction = 0.0;                               //principle reduction
               //validate input
               try
                    Loan = Double.parseDouble(amountField.getText());
               catch (NumberFormatException e)
                    JOptionPane.showMessageDialog(null,"Invalid Entry. Please enter valid loan amount.", "Error", JOptionPane.WARNING_MESSAGE);
               //resets input fields after error message
          amountField.setText("");
          amountField.requestFocusInWindow();
               //if select button is chosen
          if (selectRadioButton.isSelected())
               int index = comboBox.getSelectedIndex();
               Term = termArray[index];
               Interest = yearlyInterestArray[index];
          //if user chooses to enter mortgage information
          else
               if (enterRadioButton.isSelected())
                    //validates input
          try
          Term = Integer.parseInt(termField.getText());
          catch (NumberFormatException e)
               JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid term length in years.", "Error",JOptionPane.WARNING_MESSAGE);
               //clears fields after error message
               termField.setText("");
               termField.requestFocusInWindow();
          try
               Interest = Double.parseDouble(rateField.getText());
          catch (NumberFormatException e)
               JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid rate (without percent symbol).","Error",JOptionPane.WARNING_MESSAGE);
          //clears fields after error message
          rateField.setText("");
                         rateField.requestFocusInWindow();
               //perform calculations
               if (Loan > 0)
                    Loan = Double.parseDouble(amountField.getText());
                    MonthlyInterest = (Interest / 12)/100;
                    totalMonths = Term * 12;
                    monthlyPayment = Loan * MonthlyInterest *(Math.pow((1 + MonthlyInterest), totalMonths)/(Math.pow((1 + MonthlyInterest), totalMonths)-1));
          paymentField.setText("" + currency.format(monthlyPayment));
                    //send information to amortization text area
               amortTextArea.append("Number\t");
               amortTextArea.append(" Amount\t");
               amortTextArea.append("Interest\t");
               amortTextArea.append("Principle\t");
               amortTextArea.append("Balance\n");
          NewLoan = Loan;
                    for (int i = 1; i <= totalMonths; i++)
                         NewMonthlyInterest = MonthlyInterest * NewLoan;
                         Reduction = monthlyPayment - NewMonthlyInterest;
                         NewLoan = NewLoan - Reduction;
                         amortTextArea.append(" " + i +"\t");
                         amortTextArea.append(" " + currency.format(monthlyPayment) + "\t");
                         amortTextArea.append(" " + currency.format(NewMonthlyInterest)+ "\t");
                         amortTextArea.append(" " + currency.format(Reduction) + "\t");
                         amortTextArea.append(" " + currency.format(NewLoan) + "\n");
                    //resets fields if loan amount is less than zero
                    if((Loan <= 0 || Term <= 0 || Interest <= 0))
                         paymentField.setText("");
                         amortTextArea.setText("");
     }//end calcualtion method
     //clear method
     void Clear()
          amountField.setText("");
          amountField.requestFocusInWindow();
          termField.setText("");
          rateField.setText("");
          paymentField.setText("");
          amortTextArea.setText("");
     }//end of clear method
     //main method
     public static void main(String args[])
          Workshop5 f = new Workshop5();
          f.setTitle("Carol's Mortgage Calculator");
          f.setBounds(200,100,800,800);
          f.setResizable(false);
          f.setVisible(true);
     }//end of main method
     //exit method
     void Exit()
          System.exit(0);
     }//end of exit method
}//program end
My data file is called: "InterestData.dat" and only contains the following text:
5.35, 5.5, 5.75

Ok, now I am getting this error message:
cannot resolve symbol method lenght()
Please help me out here, this is due tomorrow and I've been killing myself on it...
attaching program with revised code included, see beginning of calculation method line 250:
import javax.swing.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.* ;
import java.text.NumberFormat;
import java.text.DecimalFormat;
import java.io.*;
import javax.swing.JOptionPane;
public class Workshop5 extends JFrame implements ActionListener
     //declare gui components
    //declare labels
    JPanel contentPane = new JPanel();
     JPanel graphPane = new JPanel();
     JLabel instructionLabel = new JLabel();
        JLabel amountLabel = new JLabel();
    JLabel orLabel = new JLabel();
    JLabel comboBoxLabel = new JLabel();
    JLabel termLabel = new JLabel();
    JLabel rateLabel = new JLabel();
    JLabel calcLabel = new JLabel();
    JLabel paymentLabel = new JLabel();
    JLabel tableLabel = new JLabel();
    //declare font object
    Font labelFont = new Font("Tahoma", Font.PLAIN, 16);
    //declare text fields
    JTextField amountField = new JTextField(20);
    JTextField termField = new JTextField(20);
    JTextField rateField = new JTextField(20);
    JTextField paymentField= new JTextField(20);
    //declare combo box for loan selection
    JComboBox comboBox = new JComboBox();
        //declare button group and radio buttons
        ButtonGroup buttonGroup = new ButtonGroup();
        JRadioButton enterRadioButton = new JRadioButton("Enter amount, term, & rate", true);
        JRadioButton selectRadioButton = new JRadioButton("Select a preset term/rate loan", false);
    //declare button objects
    JButton clearButton = new JButton();
        JButton calcButton = new JButton();
        JButton quitButton = new JButton();
    //declare text area for amortization
    JTextArea amortTextArea = new JTextArea();
    JTextArea testTextArea = new JTextArea();
    //declare scroll bar for amortization table
    JScrollPane scrollPane = new JScrollPane(amortTextArea, ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS,ScrollPaneConstants.HORIZONTAL_SCROLLBAR_AS_NEEDED);
     public Workshop5()
         instructionLabel.setText("Choose one of the following payment calculation options:");
        instructionLabel.setFont(new Font("Tahoma",Font.PLAIN,16));
        //adds both buttons to button group
        buttonGroup.add(enterRadioButton);
        buttonGroup.add (selectRadioButton);
        enterRadioButton.setFont(labelFont);
        enterRadioButton.setBackground(Color.WHITE);
        enterRadioButton.setContentAreaFilled(false);
        enterRadioButton.addActionListener(this); //adds action listener to enter radio button
        orLabel.setText("OR");
        orLabel.setFont(new Font("Tahoma",Font.BOLD,18));
        selectRadioButton.setFont(labelFont);
        selectRadioButton.setBackground(Color.WHITE);
        selectRadioButton.setContentAreaFilled(false);
        selectRadioButton.addActionListener (this); //adds action listener to select radio button
          amountLabel.setText("Enter mortgage amount");
        amountLabel.setFont(new Font("Tahoma", Font.PLAIN,16));
        amountField.requestFocusInWindow();
        termLabel.setText("Enter term length in years:");
        termLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
        rateLabel.setText("Enter interest rate:");
        rateLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
        comboBoxLabel.setText("Select a loan:");
        comboBoxLabel.setFont(new Font("Tahoma", Font.PLAIN,14));
        comboBox.setBackground(new Color(255,255,255));
        comboBox.setFont(new Font("Tahoma", Font.PLAIN, 14));
        comboBox.setEnabled(false);
        ComboBox();
        calcLabel.setText("Press Calculate button to determine monthly payment.");
        calcLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
        calcButton.setText("Calculate");
        calcButton.setFont(new Font("Tahoma", Font.BOLD, 14));
        calcButton.setBackground(new Color(202,255,112));
        calcButton.addActionListener(this);
        //define monthly payment label
        paymentLabel.setText("Monthly payment:");
        paymentLabel.setFont(new Font("Tahoma", Font.PLAIN, 16));
        //define monthly payment text field
        paymentField.setFont (new Font("Tahoma", Font.BOLD,16));
        paymentField.setBackground(new Color(255,255,255));
        paymentField.setEditable(false);
          //define clear button
        clearButton.setText("Clear");
        clearButton.setFont(new Font("Tahoma", Font.BOLD,14));
        clearButton.setBackground(new Color(202,255,112));
        clearButton.addActionListener(this);
        //define quit button
        quitButton.setText("Quit");
        quitButton.setFont(new Font("Tahoma", Font.BOLD,14));
        quitButton.setBackground(new Color(202,255,112));
        quitButton.addActionListener(this);
          //define label for amortization table
        tableLabel.setText ("Amoritization Table");
          tableLabel.setFont(new Font("Tahoma", Font.BOLD, 16));
        graphPane.setBackground(Color.WHITE);
        //add components to content
        getContentPane().add(contentPane);
        contentPane.setLayout(null);
          addComponent(contentPane, instructionLabel, 80,10,450,26);
        addComponent(contentPane, enterRadioButton, 30,40,220,30);
        addComponent(contentPane, orLabel, 280,40,100,30);
        addComponent(contentPane, selectRadioButton, 335,40,350,30);
        addComponent(contentPane, amountLabel, 100,80,220,26);
        addComponent(contentPane, amountField, 300,80,150,26);
        addComponent(contentPane, termLabel, 15,125,200,30);
        addComponent(contentPane, termField, 195,125,125,30);
        addComponent(contentPane, rateLabel, 62,160,200,30);
        addComponent(contentPane, rateField, 195,165,125,30);
        addComponent(contentPane, comboBoxLabel, 400,125,200,26);
        addComponent(contentPane, comboBox, 400,155,150,30);
        addComponent(contentPane, calcLabel, 100,200,400,30);
        addComponent(contentPane, calcButton, 250,240,100,30);
        addComponent(contentPane, paymentLabel, 150,285,200,30);
        addComponent(contentPane, paymentField, 300,285,100,30);
        addComponent(contentPane, clearButton, 100,330,100,30);
        addComponent(contentPane, quitButton, 400,330,100,30);
        addComponent(contentPane, tableLabel, 200,370,300,26);
        addComponent(contentPane, scrollPane, 10,400,450,360);
        addComponent(contentPane, graphPane, 475,400,305,360);
        //add window listener to close window when user presses X
        addWindowListener(new WindowAdapter()
             public void windowClosing(WindowEvent e)
                  System.exit(0);
        pack();
       //method to add components
       private void addComponent(Container container, Component c, int x, int y, int width, int height)
               c.setBounds(x, y, width, height);
               container.add(c);
       //action performed method
       public void actionPerformed(ActionEvent event)
               Object source = event.getSource();
               if (source == calcButton)
                       Calculate();
               if (source == clearButton)
                       Clear();
               if (source == quitButton)
                       Exit();
               //defines active area based on user selection of mortgage calculation method
               //if user chooses to enter the mortgage manually, combo box fields are inactive
               if (source == enterRadioButton)
                       comboBox.setEnabled(false);
                       termField.setEnabled(true);
               termField.setEditable(true);
               rateField.setEnabled(true);
               rateField.setEditable(true);
               amountField.setText ("");
                       amountField.requestFocusInWindow();
                       termField.setText("");
                   rateField.setText("");
                   paymentField.setText ("");
                   amortTextArea.setText("");
               //if user chooses to select from a preset mortgage, rate and term fields are inactive
               if (source == selectRadioButton)
                       comboBox.setEnabled(true);
                       termField.setEnabled(false);
                       termField.setEditable(false);
                       rateField.setEnabled (false);
                       rateField.setEditable(false);
                       amountField.setText("");
                       amountField.requestFocusInWindow();
                       termField.setText ("");
                       rateField.setText("");
                       paymentField.setText("");
                       amortTextArea.setText("");
       }//end of action performed method
       //combo box method
        public void ComboBox()
               String[] LoanArray = {" 7 years at 5.35 %", " 15 years at 5.50 %", " 30 years at 5.75 %"};
               for (int i = 0; i < LoanArray.length; i++)
                       comboBox.addItem(LoanArray);
}//end combo box method
//calculation method
     void Calculate()
          //resets fields
          paymentField.setText("");
          amortTextArea.setText("");
          //calculation variables
          NumberFormat currency = NumberFormat.getCurrencyInstance();
          //declare input stream object
          InputStream istream;
          //create a file object to refer to the outside file
          File interestData = new File("InterestFile.dat");
          //assign instream to the new file object
          istream = new FileInputStream(interestData);
          try
               StringBuffer sb = new StringBuffer();
               BufferedReader in = new BufferedReader(new FileReader(interestData));
               String line = "";
               while((line = in.readLine()) != null)
                    sb.append(line);
               in.close();
               String fileData = sb.toString();
               String[] splitData = fileData.split(", ");
               double [] yearlyInterestArray = new double[splitData.length()];
               for(int j = 0; j < splitData.length(); j++)
                    yearlyInterestArray[j] = new Double(splitData[j]).doubleValue();
          catch (IOException e)
               JOptionPane.showMessageDialog(null, "File does not exist." + e.getMessage());
          int [] termArray = {7, 15, 30}; //array of years
          double [] yearlyInterestArray = { 5.35, 5.5, 5.75}; //array of interest
          int totalMonths = 0; //total months
          double Loan = 0.0; //amount of loan
          double MonthlyInterest = 0.0; //monthly interest rate
          double Payment = 0.0; //calculate payment
double monthlyPayment = 0.0; //calculate monthly payment
double Interest = 0.0; //variable for Interest Array input
int Term = 0; //variable for Term Array input
double NewMonthlyInterest = 0.0; //new interest amount
double NewLoan = 0.0; //new loan amount
double Reduction = 0.0; //principle reduction
//validate input
try
     Loan = Double.parseDouble(amountField.getText());
catch (NumberFormatException e)
     JOptionPane.showMessageDialog(null,"Invalid Entry. Please enter valid loan amount.", "Error", JOptionPane.WARNING_MESSAGE);
//resets input fields after error message
amountField.setText("");
amountField.requestFocusInWindow ();
          //if select button is chosen
          if (selectRadioButton.isSelected())
               int index = comboBox.getSelectedIndex ();
               Term = termArray[index];
               Interest = yearlyInterestArray[index];
          //if user chooses to enter mortgage information
          else
               if (enterRadioButton.isSelected())
          //validates input
          try
               Term = Integer.parseInt(termField.getText());
catch (NumberFormatException e)
     JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid term length in years.", "Error",JOptionPane.WARNING_MESSAGE);
     //clears fields after error message
     termField.setText("");
     termField.requestFocusInWindow();
try
     Interest = Double.parseDouble(rateField.getText());
catch (NumberFormatException e)
     JOptionPane.showMessageDialog(null,"Invalid entry. Please enter valid rate (without percent symbol).","Error",JOptionPane.WARNING_MESSAGE);
     //clears fields after error message
     rateField.setText("");
     rateField.requestFocusInWindow();
          //perform calculations
          if (Loan > 0)
               Loan = Double.parseDouble(amountField.getText ());
               MonthlyInterest = (Interest / 12)/100;
               totalMonths = Term * 12;
               monthlyPayment = Loan * MonthlyInterest *(Math.pow ((1 + MonthlyInterest), totalMonths)/(Math.pow((1 + MonthlyInterest), totalMonths)-1));
paymentField.setText("" + currency.format(monthlyPayment));
//send information to amortization text area
amortTextArea.append("Number\t");
amortTextArea.append(" Amount\t");
amortTextArea.append("Interest\t");
amortTextArea.append("Principle\t");
amortTextArea.append("Balance\n");
               NewLoan = Loan;
               for (int i = 1; i <= totalMonths; i++)
     NewMonthlyInterest = MonthlyInterest * NewLoan;
     Reduction = monthlyPayment - NewMonthlyInterest;
     NewLoan = NewLoan - Reduction;
     amortTextArea.append(" " + i +"\t");
     amortTextArea.append (" " + currency.format(monthlyPayment) + "\t");
     amortTextArea.append(" " + currency.format(NewMonthlyInterest)+ "\t");
     amortTextArea.append(" " + currency.format(Reduction) + "\t");
     amortTextArea.append(" " + currency.format(NewLoan) + "\n");
//resets fields if loan amount is less than zero
if((Loan <= 0 || Term <= 0 || Interest <= 0))
     paymentField.setText("");
     amortTextArea.setText("");
     }//end calcualtion method
//clear method
void Clear()
amountField.setText("");
amountField.requestFocusInWindow();
termField.setText("");
rateField.setText("");
paymentField.setText("");
amortTextArea.setText("");
}//end of clear method
//main method
public static void main(String args[])
Workshop5 f = new Workshop5();
f.setTitle("Carol's Mortgage Calculator");
f.setBounds(200,100,800,800);
f.setResizable(false);
f.setVisible(true);
}//end of main method
//exit method
void Exit()
System.exit(0);
}//end of exit method
}//program end

FM or Method for replicating trasaction EAMASI

I am working on a utility project right now.
I want to do a mass Billing simulation run from a custom program. Please advice me on any function module or method which will help me in attaining the same functionality as done in EAMASI (Mass Billing Simulation).
I found the FM ISU_BILLING_SIMULATION_SERVICE, but it is not serving our purpose as the input for this does not seems to be same as inthe trasaction EAMASI.
Waiting for a very quick and positive response.
Thanks,
Arun Devidas
Edited by: Arun Devidas on Feb 26, 2009 6:37 PM

My requirement was to do some calcualtion to get average for the readings and then use that for actual billing.
I wrote a user exit in the billing and thus got resolved.
But the FM you gave me also seems to be working for biling simulation. Thanks.

User exit-FI-Changeover method

I am using the user exit EXIT_SAPLAFAR_003 for changeover method.In the transaction AFAMA we can assign the depriciation calculation methods w.r.t depriciation key.There are two phases for the dep.key.requirmrnt is that when i want to do acquisition for an asset if the acquistion yr. is same as the current year phase 1 of the should be called which is defining 30% tax on the asset.If asset has already been acquired previous year then phase 2 should be called which defines 10% tax.
I can check my user-exit through t-code F-90.Problem is im unable to make out what parameters i need to pass from the user exit to calcualte according to requirement.
Urgent help required.Thanks.

Hi
Have you set that field as available for subistitution?
See table GB01
Max

Valid methods to back up ASO database

Hi Experts,
I think there are 2 ways to back up ASO database
1) Maxl alter database commands
2)Esscmd BEGIN ARCHIVE/END ARCHIVE
Can any one confirm me that above methods are valid to do the tasks .If invalid let me know which one is invalid.I went through dbag and it give me little confusion in finding which one is valid methid.

Hi John,
Thank you for the reply.
I have some clarification on the following question which i came in certification last 2 days back.
A calcualtion is performed on a database for which create block on equation is off.The command SET CREATEBLOCKONEQ ON is issued immediately before an equation in the script.which statements accurately describe when blocks will be created?
1) blocks will be created ONLY when the equation assigns non - constant values to members of sparse diemension.
2)blocks will be created only when the equation assigns constant values to memebers of sparse dimension
3)blocks will be created when the equation assignes either constant or non constant values to a members of sparse dimension
4)No blocks will be created.
please clarify on the above.

Error while calling a method on Bean (EJB 3.0)

I am getting an error while calling a method on EJB. I am using EJB3.0 and my bean is getting properly deployed(i am sure b'cos i can see the successfullly deployed message). Can any body help me
Error is -->
Error while destroying resource :An I/O error has occured while flushing the output - Exception: java.io.IOException: An established connection was aborted by the software in your host machine
Stack Trace:
java.io.IOException: An established connection was aborted by the software in your host machine
at sun.nio.ch.SocketDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:33)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at com.sun.enterprise.server.ss.provider.ASOutputStream.write(ASOutputStream.java:138)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at org.postgresql.PG_Stream.flush(PG_Stream.java:352)
at org.postgresql.core.QueryExecutor.sendQuery(QueryExecutor.java:159)
at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:70)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:482)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:461)
at org.postgresql.jdbc1.AbstractJdbc1Connection.rollback(AbstractJdbc1Connection.java:1031)
at org.postgresql.jdbc2.optional.PooledConnectionImpl$ConnectionHandler.invoke(PooledConnectionImpl.java:223)
at $Proxy34.close(Unknown Source)
at com.sun.gjc.spi.ManagedConnection.destroy(ManagedConnection.java:274)
at com.sun.enterprise.resource.LocalTxConnectorAllocator.destroyResource(LocalTxConnectorAllocator.java:103)
at com.sun.enterprise.resource.AbstractResourcePool.destroyResource(AbstractResourcePool.java:603)
at com.sun.enterprise.resource.AbstractResourcePool.resourceErrorOccurred(AbstractResourcePool.java:713)
at com.sun.enterprise.resource.PoolManagerImpl.putbackResourceToPool(PoolManagerImpl.java:424)
at com.sun.enterprise.resource.PoolManagerImpl.resourceClosed(PoolManagerImpl.java:393)
at com.sun.enterprise.resource.LocalTxConnectionEventListener.connectionClosed(LocalTxConnectionEventListener.java:69)
at com.sun.gjc.spi.ManagedConnection.connectionClosed(ManagedConnection.java:618)
at com.sun.gjc.spi.ConnectionHolder.close(ConnectionHolder.java:163)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeDatasourceConnection(DatabaseAccessor.java:379)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.closeConnection(DatasourceAccessor.java:367)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeConnection(DatabaseAccessor.java:402)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.afterJTSTransaction(DatasourceAccessor.java:100)
at oracle.toplink.essentials.threetier.ClientSession.afterTransaction(ClientSession.java:104)
at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.afterTransaction(UnitOfWorkImpl.java:1816)
at oracle.toplink.essentials.transaction.AbstractSynchronizationListener.afterCompletion(AbstractSynchronizationListener.java:161)
at oracle.toplink.essentials.transaction.JTASynchronizationListener.afterCompletion(JTASynchronizationListener.java:87)
at com.sun.ejb.containers.ContainerSynchronization.afterCompletion(ContainerSynchronization.java:174)
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:467)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:121)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:650)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:193)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1705)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1565)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:947)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:178)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:717)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:473)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1270)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:479)
End of Stack Trace
|#]
RAR5035:Unexpected exception while destroying resource. To get exception stack, please change log level to FINE.
EJB5018: An exception was thrown during an ejb invocation on [DepartmentSessionBean]
javax.ejb.EJBException: Unable to complete container-managed transaction.; nested exception is: javax.transaction.SystemException
javax.transaction.SystemException
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:452)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

Means theres an error in XML/ABAP conversion probably due a syntax error...
Regards
Juan

Issue with SharePoint foundation 2010 to use Claims Based Auth with Certificate authentication method with ADFS 2.0

I would love some help with this issue. I have configured my SharePoint foundation 2010 site to use Claims Based Auth with Certificate authentication method with ADFS 2.0 I have a test account set up with lab.acme.com to use the ACS.
When I log into my site using Windows Auth, everything is great. However when I log in and select my ACS token issuer, I get sent, to the logon page of the ADFS, after selected the ADFS method. My browser prompt me which Certificate identity I want
to use to log in and after 3-5 second
and return me the logon page with error message “Authentication failed”
I base my setup on the technet article
http://blogs.technet.com/b/speschka/archive/2010/07/30/configuring-sharepoint-2010-and-adfs-v2-end-to-end.aspx
I validated than all my certificate are valid and able to retrieve the crl
I got in eventlog id 300
The Federation Service failed to issue a token as a result of an error during processing of the WS-Trust request.
Request type: http://schemas.xmlsoap.org/ws/2005/02/trust/RST/Issue
Additional Data
Exception details:
Microsoft.IdentityModel.SecurityTokenService.FailedAuthenticationException: MSIS3019: Authentication failed. ---> System.IdentityModel.Tokens.SecurityTokenValidationException:
ID4070: The X.509 certificate 'CN=Me, OU=People, O=Acme., C=COM' chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed
correctly, but one of the CA certificates is not trusted by the policy provider.
at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
--- End of inner exception stack trace ---
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.BeginGetScope(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.BeginIssue(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.DispatchRequestAsyncResult..ctor(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginDispatchRequest(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.ProcessCoreAsyncResult..ctor(WSTrustServiceContract contract, DispatchContext dispatchContext, MessageVersion messageVersion, WSTrustResponseSerializer responseSerializer, WSTrustSerializationContext
serializationContext, AsyncCallback asyncCallback, Object asyncState)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginProcessCore(Message requestMessage, WSTrustRequestSerializer requestSerializer, WSTrustResponseSerializer responseSerializer, String requestAction, String responseAction, String
trustNamespace, AsyncCallback callback, Object state)
System.IdentityModel.Tokens.SecurityTokenValidationException: ID4070: The X.509 certificate 'CN=Me, OU=People, O=acme., C=com' chain building
failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
thx
Stef71

This is perfectly correct on my case I was not adding the root properly you must add the CA and the ADFS as well, which is twice you can see below my results.
on my case was :
PS C:\Users\administrator.domain> $root = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
cer\SP2K10\ad0001.cer")
PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "domain.ad0001" -Certificate $root
Certificate : [Subject]
CN=domain.AD0001CA, DC=domain, DC=com
[Issuer]
CN=domain.AD0001CA, DC=portal, DC=com
[Serial Number]
blablabla
[Not Before]
22/07/2014 11:32:05
[Not After]
22/07/2024 11:42:00
[Thumbprint]
blablabla
Name : domain.ad0001
TypeName : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
DisplayName : domain.ad0001
Id : blablabla
Status : Online
Parent : SPTrustedRootAuthorityManager
Version : 17164
Properties : {}
Farm : SPFarm Name=SharePoint_Config
UpgradedPersistedProperties : {}
PS C:\Users\administrator.domain> $cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
cer\SP2K10\ADFS_Signing.cer")
PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "Token Signing Cert" -Certificate $cert
Certificate : [Subject]
CN=ADFS Signing - adfs.domain
[Issuer]
CN=ADFS Signing - adfs.domain
[Serial Number]
blablabla
[Not Before]
23/07/2014 07:14:03
[Not After]
23/07/2015 07:14:03
[Thumbprint]
blablabla
Name : Token Signing Cert
TypeName : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
DisplayName : Token Signing Cert
Id : blablabla
Status : Online
Parent : SPTrustedRootAuthorityManager
Version : 17184
Properties : {}
Farm : SPFarm Name=SharePoint_Config
UpgradedPersistedProperties : {}
PS C:\Users\administrator.PORTAL>

Using G_SET_GET_ALL_VALUES Method

Hi,
I need to use the following method. G_SET_GET_ALL_VALUES. But I'm not sure of the data type that it returns.
CALL FUNCTION 'G_SET_GET_ALL_VALUES'
EXPORTING
CLIENT                      = ' '
FORMULA_RETRIEVAL           = ' '
LEVEL                       = 0
    setnr                       = wa_itab_progrp-setname
VARIABLES_REPLACEMENT       = ' '
TABLE                       = ' '
CLASS                       = ' '
NO_DESCRIPTIONS             = 'X'
NO_RW_INFO                  = 'X'
DATE_FROM                   =
DATE_TO                     =
FIELDNAME                   = ' '
tables
    set_values                  = ????????
EXCEPTIONS
SET_NOT_FOUND               = 1
OTHERS                      = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Can anyone please let me know what I should do at the SET_VALUES section.
Thanks
Lilan

Hi,
See the FM Documentation,
This function module determines all the values of a set or its subordinate sets. The required call parameter is the set ID (SETNR). The other parameters are optional:
FORMULA_RETRIEVAL: 'X' => The formulas in the set are also returned (default ' ' requires fewer database accesses)
LEVEL: The default value is 0 and means "expand all levels". Values other than 0 determine the level to which they are to be expanded
VARIABLES_REPLACEMENT: 'X' => The value variables in the set hierarchy are replaced by their default values (this means additional database accesses for each variable)
NO_DESCRIPTIONS: 'X' => The short descriptions of the sets and set lines are not read from the database. For performance reasons you should only set this parameter to ' ' if you need the texts
The values determined are returned to the internal table SET_VALUES.
Thanks.

Clearing values from request in decode method

I am using a custom table paginator. In its decode method I have the next code to control whether next link is clicked:
String pLink = (String)requestMap.get("pLink" + clientId);
if ((pLink != null) && (!pLink.equals(""))) {
     if (pLink.equals("next")) {
     } else if (pLink.equals("previous")) {
}But the next sequence produces some problems:
1.     Initial page load.
2.     Click on next link.
3.     Table navigates ok to next page.
4.     Reload page (push F5).
5.     The previous click still remains in the request, so decode method think next link is pressed again.
6.     Application abnormal behaviour arises.
So, I am trying to clear the next_link key from the request, but next code throws an UnsupportedOperationException:
String pLink = (String)requestMap.get("pLink" + clientId);
if ((pLink != null) && (!pLink.equals(""))) {
     if (pLink.equals("next")) {
     } else if (pLink.equals("previous")) {
     requestMap.put("pLink" + clientId, "");
}Do any of you have some ideas?

Hey, where are you RaymondDeCampo, rLubke, BalusC ... the masters of JSF Universe?
;-)

Method all values from row

Hi,
Is there a method that get the all the values of a row? I've gone through the java api but didn't found one, but wanted to be sure.
If not I'll have to do getValueAt for every column?
Grtz

Here is one possible implementation using RowTableModel (a self made class).
To access a row, we can use this: Product product = (Product) model.getRow(rowIndex);
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.table.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.util.List;
public class Tabel extends JPanel {
    private JTable table;
    private JTextField filterText;
    private TableRowSorter<MyTableModel> sorter;
    private String output;
    private final MyTableModel model;
    public Tabel() {
        //Create a table with a sorter.
        model = new MyTableModel();
        sorter = new TableRowSorter<MyTableModel>(model);
        table = new JTable(model);
        table.setRowSorter(sorter);
        table.setPreferredScrollableViewportSize(new Dimension(500, 200));
        table.setFillsViewportHeight(true);
        //Single selection
        table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
        //Making sure columns can't be dragged and dropped
        table.getTableHeader().setReorderingAllowed(false);
        //Double click event
        table.addMouseListener(new MouseAdapter() {
            @Override
            public void mouseClicked(MouseEvent mouseEvent) {
                if (mouseEvent.getClickCount() == 2) {
                    System.out.print(output);
        //Create the scroll pane and add the table to it.
        JScrollPane scrollPane = new JScrollPane(table);
        //Add the scroll pane to this panel.
        add(scrollPane);
        JPanel form = new JPanel();
        JLabel l1 = new JLabel("Filter Text:");
        form.add(l1);
        filterText = new JTextField(15);
        //Whenever filterText changes, invoke newFilter.
        filterText.getDocument().addDocumentListener(
                new DocumentListener() {
                    public void changedUpdate(DocumentEvent e) {
                        newFilter();
                    public void insertUpdate(DocumentEvent e) {
                        newFilter();
                    public void removeUpdate(DocumentEvent e) {
                        newFilter();
        l1.setLabelFor(filterText);
        form.add(filterText);
        add(form);
     * Update the row filter regular expression from the expression in
     * the text box.
    private void newFilter() {
        RowFilter<MyTableModel, Object> rf = null;
        //If current expression doesn't parse, don't update.
        try {
            rf = RowFilter.regexFilter("(?i)" + filterText.getText(), 0); //"(?i)" => Zoeken gebeurd case-insensitive
        } catch (java.util.regex.PatternSyntaxException e) {
            return;
        sorter.setRowFilter(rf);
    class MyTableModel extends RowTableModel {
        private final List<Product> mData;
        private final List<String> cNames;
        public MyTableModel() {
            super(Product.class);
            mData = new ArrayList<Product>();
            mData.add(new Product("Frontline Small", 5, 1));
            mData.add(new Product("Frontline Medium", 10, 2));
            mData.add(new Product("Frontline Large", 15, 1));
            mData.add(new Product("Frontline Extra Large", 20, 2));
            mData.add(new Product("Frontline spuitbus", 7.5, 3));
            cNames = new ArrayList<String>();
            cNames.add("Product");
            cNames.add("Prijs");
            cNames.add("Aantal stuks beschikbaar");
            setDataAndColumnNames(mData, cNames);
            setColumnClass(0, String.class);
            setColumnClass(1, Double.class);
            setColumnClass(2, Integer.class);
        public Object getValueAt(final int rowIndex, final int columnIndex) {
            switch (columnIndex) {
                case 0:
                    return mData.get(rowIndex).getDescriction();
                case 1:
                    return mData.get(rowIndex).getPrice();
                case 2:
                    return mData.get(rowIndex).getNumber();
            return null;
        @Override
        public Class getColumnClass(int column) {
            return super.getColumnClass(column);
    private static void createAndShowGUI() {
        //Create and set up the window.
        JFrame frame = new JFrame();
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        Tabel newContentPane = new Tabel();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
    public static void main(final String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
class Product {
    private String descriction;
    private double price;
    private int number;
    Product(final String descriction, final double price, final int number) {
        this.descriction = descriction;
        this.price = price;
        this.number = number;
    public String getDescriction() {
        return descriction;
    public void setDescriction(final String descriction) {
        this.descriction = descriction;
    public int getNumber() {
        return number;
    public void setNumber(final int number) {
        this.number = number;
    public double getPrice() {
        return price;
    public void setPrice(final int price) {
        this.price = price;
    @Override
    public String toString() {
        return descriction + ", " + price + ", " + number;
}

How can I move an ArrayList from one method to another?

As the subject reveals, I want to know how I move an ArrayList. In one method, I fill my ArrayList with objects, and in the next I want to pick an arbitrary object out of the ArrayList.
How do I make this work??

You pass the same array list to both the method. Both method are getting the same thing.
void main(){
//create array list here
ArrayList aList = new ArrayList();
//pass it to a method to fill items
fillArrayList(aList);
//pass the same arraylist to another method
printArrayList(aList);
void fillArrayList(ArrayList list){
list.add("A");
void printArrayList(ArrayList list){
//The array list will contain A added by the previos method
System.out.println(list);
FeedFeeds : http://www.feedfeeds.com

HT1918 Can I have multiple payment methods on one account

Currently, both of my teenage sons and I are sharing an Apple account with one payment method. I would like to have a payment method for each of us.

If they are teenagers, it is not too soon to set up individual accounts per person.
This will address the separate payments issue, and will make it much easier in a few years when they start heading off to university or moving to their own living arrangements.

A method to convert an existing iCloud account to a Child iCloud Account for Family Sharing

I do not see any method by which to convert an existing iCloud account (we have three set up for our kids, all their birthdays are set later than their actual birthdays so we could grab their actual names before they were all gone years ago) to a new Child iCloud Account for use with Family Sharing (namely to be able to take advantage of the new features: Family Calendar, Photostream, 'Ask to Buy' on the Stores, etc. on their own iPad minis.
If this is just not possible under the current scheme, please oh please Apple make this an option - there are probably thousands of others in this same boat, and I refuse to give up my kids' iCloud accounts!

I've read every string and workaround solution on these forums (to date). There's really no good options here.
USER STORY: My kid (age 7) has an iPad 2. I created an email address for him (which he doesn't know about). I created an apple ID for him (which he also doesn't know or care about) and I set up his Apple ID with my credit card. In addition I've set up parental controls on the iPad to lock it down and make it more age appropriate. Over the past year or so it's worked out fine, he sees something he might like, brings the iPad to me and if I approve, I enter the Apple ID Password and approve the purchase. After a year of doing this, he has a nice little collection of apps, kid songs, a few movies, etc. I would like to move my kid over to a legitimate kid account now that Apple has released features that support this. Currently the ability to convert an account does not exist. Seems like it should be easy to change a birthday, etc.
Almost seems like Apple is penalizing us for getting our kid an iPad last year.
Apple - Please consider my user story for your upcoming feature enhancements.

How can i execute ejb method in a servlet?

hi
I am using a IBM HTTP Server and Weblogic Server.
I could execute below source in a main method of application but i could not that in a init method of servlet because of ClassCastException.
(a classpath of weblogic contains client's classpath)
// source code
Hashtable props = new Hashtable();
props.pu(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
props.put(Context.PROVIDER_URL,
"t3://192.168.1.5:7001");
Context ctx = new InitialContext(props);
Object obj = ctx.lookup("session.LigerSessionHome");
LigerSessionHome home = (LigerSessionHome) PortableRemoteObject.narrow (obj, LigerSessionHome.class);
// error code
Exception : session.LigerSessionBeanHomeImpl_ServiceStub
java.lang.ClassCastException: session.LigerSessionBeanHomeImpl_ServiceStub
at com.ibm.rmi.javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:253)
at javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:136)
at credit.getCreditResearch(credit.java:41)
at creditResearchClient.doGet(creditResearchClient.java:122)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
thanks

Have your stubs somehow got out of sync? So that your Servlet engine is pointing to a different jar than that of your jvm on which you were running your client application
hi
I am using a IBM HTTP Server and Weblogic Server.
I could execute below source in a main method of
application but i could not that in a init method of
servlet because of ClassCastException.
(a classpath of weblogic contains client's classpath)
// source code
Hashtable props = new Hashtable();
props.pu(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
props.put(Context.PROVIDER_URL,
"t3://192.168.1.5:7001");
Context ctx = new InitialContext(props);
Object obj = ctx.lookup("session.LigerSessionHome");
LigerSessionHome home = (LigerSessionHome)
PortableRemoteObject.narrow (obj,
LigerSessionHome.class);
// error code
Exception :
session.LigerSessionBeanHomeImpl_ServiceStub
java.lang.ClassCastException:
session.LigerSessionBeanHomeImpl_ServiceStub
at
com.ibm.rmi.javax.rmi.PortableRemoteObject.narrow(Porta
leRemoteObject.java:253)
at
javax.rmi.PortableRemoteObject.narrow(PortableRemoteObj
ct.java:136)
at credit.getCreditResearch(credit.java:41)
at
creditResearchClient.doGet(creditResearchClient.java:12
at
javax.servlet.http.HttpServlet.service(HttpServlet.java
740)
at
javax.servlet.http.HttpServlet.service(HttpServlet.java
865)
thanks

Can I use classes and methods for a maintenance view events?

Hello experts,
Instead of perform/form, can I instead use classes and methods, etc for a given maintenance view event, lets say for example I want to use event '01' which is before saving records in the database. Help would be greatly appreciated. Thanks a lot guys!

Hi viraylab,
1. The architecture provided by maintenance view
   for using EVENTS and our own code inside it -
   It is provided using FORM/PERFORM
   concept only.
2. At this stage,we cannot use classes.
3. However, inside the FORM routine,
   we can write what ever we want.
   We can aswell use any abap code, including
   classes and methods.
(But this classes and methods won't have any
   effect on the EVENT provided by maintenance view)
regards,
amit m.

Calcualtion methods in AA

Similar Messages

Maybe you are looking for