Calculating the distance to the bottom of the page

Hi All,
I have several reports which include multiple details desction within them, which display on certain data conditions. I need a way to be able to group these together so as to be able to page break better.
what i was hoping to be able to do was on a new group record, figure out a set distance and see if it was close to the bottom margin, if so then pagebreak it first .
How would I be able to acheive this ??
Any ideas greatly appreciated
Tim

There is no inherent way to do this via a formula, but there is an option using a subreport.
If you make a subreport that is placed in the report header and is designed exactly like the main report you could use shared variables to calculate how much space will be used (rows) by each section and then pass that data to the main report. Inside the main report you would be able to conditionally handle suppression and page breaks to show the data as you desire.
Let me know if this helps,
-Sean

Similar Messages

Hi. I am building a website with the White template. Does anyone know which typeface was used by Apple on the heading index? (I would like to repeat the index at the bottom of my pages).

Hi I am building a website using iWeb's white template. I can't write HTML, so can't change the index, but would like to repeat it at the bottom of my pages. Does anyone know which typeface Apple used? Presumably it would be 'web friendly' for use as described above?

Arial
PS. You can see it in the source of the published page where it says new NavBar etc...
".navbar {\n\tfont-family: Arial, sans-serif;\n\tfont-size: 1em;\n\tcolor: #666;\

Trying to combine multi PDF docs into one, but losing a barcode overlay at the bottom of the page.

Hello,
I'm attempting to put approximately 100 PDF documents (various page lengths) together to create one, however when I use the typical method, File>Create PDF>Multiple Files then combine them I lose the barcode at the bottom of the page. I believe the barcode is seen by Adobe as an overlay, but I could be mistaken. I'm not sure if there is some options I could be changing to make this work. My other alternative is to use the insert...but this would be very time consuming. I'm looking to have more of these in the future so any assistance would be greatly appreciated.
Thank you,

Hi,
Trying to check this issue. Please let us know the version of Acrobat that this Combine behavior is seen in.
thanks

When I'm on microsoft word and typing and get to the bottom of the page a new page doesn't just come up, i have to manually put it there so then when i go back and add stuff to the first page i loose whatever was at the bottom. how do i stop this?

When I'm on microsoft word on my macbook air and get to the bottom a the page, a new page does not come up. i have to manually insert one. so then when i go back to edit my work and add something in what ever was at the bottom of the page disappears. how can i stop this from happening or change it so a new page opens by itself?

It sounds like you have chosen a publishing template rather than a word processing template. There are two basic modes in MS Word: word processing and publishing layout. Word processing mode (and all word processing templates) have a continuous text box in the page for writing text. The publishing layout mode (and publishing templates) are documents that have text boxes placed for articles, titles, pictures, etc. Be sure to choose the word document template and you’ll get what you expect. Do not choose the word publishing document.

How do you disable the notifications that display at the bottom of the page when requesting a page (i.e. "waiting...", "connecting...")? I am trying to run Firefox in a kiosk mode and remove any indication that the content is online.

I have an iFrame setup to display multiple pages using a timer and an array to automatically change the source of an iFrame every "x" seconds. Each time the iFrame source is changed, a small gray notification box appears (for about 1 second or so) at the bottom left part of the screen that seems to indicate a new page is loading. I would like to remove that notification so the page will change seamlessly without indicating that the source for the iFrame has changed.

You can use this extension to hide the pop-up that shows the URL of a link on hover and other data that previously appeared on the Status bar.
*Status-4-Evar: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/

When I open a link in a new tab, most of the time it opens to the bottom of the page, and I have to scroll back up to the top or hit the Home key.

When reading a web page, I will right-click on a link and select 'open link in new tab' and most of the time it will open the new page right at the bottom. I then have to scroll up with the mouse or hit the 'home' button on my keyboard to get back to the top of the page. I've already looked at the tab settings in the options menu, and there's nothing there that seems to apply.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox

Printing on the bottom of the page...

Hi,
I'm working on a Dunning letter report that has a remit slip. The remit slip needs to always print on the bottom of the page. Is there a way to force a frame to always print at the bottom of the page.
Thanks,
Tom

Hi Navneet,
Thanks for the suggestion, but it worked the same way as when I anchored the objects from the top of frame B to the bottom of frame A.
There are two problems that make this a little harder then it looks. One of the problems is that this a modification to the Oracle Apps Dunning Letter report. We do not want to loose too much of the vanilla stuff. So the main repeating frame incloses everything. The second problem is that there is data in the bottom frame. So it has to be in the repeating frame or I can't show the data that I need.
Thanks for the try, but it seems like this is just something that Oracle can't handle. If it could I would think Oracle would have done it in the first place. Just my guess. I'm still open to try any other suggestions you have.
Thanks,
Tom

Can't reach the print button on the bottom of the page

When the page preview page appears, I can't reach the print button at the bottom of the page.

To use AirPlay, you will need the following:
iPhone 4s (or later), iPad 2 (or later), iPad mini, or iPod touch (5th generation)
Apple TV (2nd or 3rd generation)
AirPort Express
Wi-Fi (802.11a/g/n) network

In my Yahoo mail: when I click on any opened email the page jumps down to the bottom of the email. I've contacted Yahoo about this. Is this a problem with Yahoo, Mozilla or neither? Is it just my computer has something wrong with it? This started last wee

When I open a Yahoo email the page jumps down to the bottom of the page. Is this a Yahoo problem, Mozilla or neither?
== This happened ==
Every time Firefox opened
== last week

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

When I reply to a e-mail, my reply always goes to the bottom of the page on the E-mail rather than on the top of the page. How can I fix that. in English

Is there a fix for making the reply message start at the top of the Page rather than the bottom of the page. No one ever thinks to look at the bottom of the page for a reply message to a E-mail.

Firefox doesn't do email, it's strictly a web browser.
If you are using Firefox to access your mail, you are using "web-mail". That is probably a setting in the web-mail software, like in their Preferences panel. There is no setting for that in Firefox.

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

How do I get my animation to start at the bottom of the page?

I have an edge animation that looks like it starts at the bottom of the page when I view in Edge but on my HTML there is a gap between the start of the animation and the bottom of the page. They style specifies margin of 0px but there is still a gap.
Here's the page: https://dl.dropboxusercontent.com/u/250742873/web/orangeballoon/orangeballoon.html
Any help would be appreciated!

The project files are correct, But still not clear on the start margin problem that you are facing.
I changed the bg color of stage to red and seems like things look correct ( screenshot. ).
Also at frame ( 00:04.500 ), the keyframe has a value of 296px, would making it 300px help ?
Can you provide a screenshot on what is expected ?
-Avinash

When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!

When I open a new website, the page does not open, instead it places a tab in the bottom task bar? How can I change the settings so as when I open a new website the page is automatically displayed on my desktop. Thank You!

Tools > Options > Tabs - is the last preference there check-marked??

In the Calendar there used to be the daily activities listed at the bottom of the page when you had the monthly view on it

In the Calendar there used to be the daily activities listed at the bottom of the page when you had the monthly view on it.
For example you could see the whole month, the day you select was highlighted and at the bottom of the page listed any activities.
Now this does not happen. Am I missing something?
The Calender seems to have gone backwards!!!
HELP!!!
PLEASE!!!!

Ditto! I have always preferred the month as the default view and the list at the page bottom let me know what I need to pay attention to for today (or tomorrow, or any future date). Having to scoll through every hour of the day to find items that may or not be there is a huge waste of time!
I hate this calendar!!!! I've been okay with other changes in ios7 but they need to make changes. How about letting us configure our own calendar views? Choose "home" page look by month or week, itemize daily view by hour or by items entered, etc.

I have a yahoo search at the bottom of mozilla page and want it gone.

My son installed a video game and didn’t catch the yahoo search. The yahoo search is at the bottom of the page along with my weather info I have added on. This is not an extension or an add-on that I can just simply go into add-ons and uninstall it. I have tired going into about:config and there is nothing about yahoo that I can find please help.

Hey Joe,
Are you saying that your default search has been changed? If so, that's an easy fix. Just take a look at the [[Search bar]] Knowledge Base article. This will give you steps to change it back.
When you mentioned weather, it sounds like maybe this is some sort of Yahoo toolbar that has been added on though. Is that what you are talking about? If that is the case, I would head over to Yahoo and look at some of their help documentation. This one looks about right:
http://help.yahoo.com/l/us/yahoo/toolbar/toolbar1ff/basics/general-07.html
Hopefully this helps

How do I get rid of the new "status bar" at the bottom of the page where the web address pops up?

On the left hand side of the page in the bottom corner, the web address pops up every time a new page is loading. What if I don't want that? How do I disable it?

miss.bev.brown, Right-click on a toolbar, then click on teh "Add-on bar" entry to de-select it.
If the add-on bar keeps coming back, you will have an add-on that is causing this. One that does this is the McAfee Site Advisor, disabling or uninstalling it stops that from happening.

Calculating the distance to the bottom of the page

Similar Messages

Maybe you are looking for