Call Forms Forum from Oracle Forms Main Page - Error 404 Not Found

Hello !
The Layout and fuctionality of the Oracle Forms Forum has changed - very nice !
But it's not possible to call the Oracle Forms Forum
from the Oracle Forms Main Page !
Error-message :
404 Not Found
OracleJSP: An error occurred. Consult your application/system administrator for support. Programmers should consider setting the init-param debug_mode to "true" to see the complete exception message.
Thomas

Please use the [Post-Upgrade Problems|http://forums.oracle.com/forums/forum.jspa?forumID=587&start=0] to report Forums related problems.
This is the Forms Forum.
Tony

Similar Messages

First Page -Error 404--Not Found

Hi All,
I started learning ADF recently, I have created EO,VO,AM. My Jdev version is 11.1.1.3.0.
I tested with BC4J Tester everything is working fine.
But when I create JSF page and say Run I am getting the following error in the internet explorerer browser.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
This is the first time i am trying to run the page. could any one please let me know what are the setting i need to do,In Order to view my page.
Thanks
Kumar.

So first make sure the page is NOT under the web-inf folder (as John correctly stated) and then dragyour page onto the adfc-config.xml file. The the page gets hopefully registered.
If not drag a new view from the component palette onto the adfc-config.xml, give the view a name like 'TestMyApp' (don't let the name end in '.jspx'), create the page (double click on the icon) and put something onto the page.
Then you can change the view controllers project properties and select run/debug select the default run configuration and edit it. Under 'launch settings' select the adfc-config.xml as target, uncheck the 'attempt to Run Active...' and now select 'ADF Task Flow' in the left hand side tree. Now you select the newly created view TestMYApp and save your changes.
When you now run the app using the menu run (or debug) command, your app starts with the selected page 'TestMyApp'.
Timo

UCM Log in error : Error 404--Not Found From RFC 2068 Hypertext Transfer Pr

i am not able to get ucm login page , admin and manage server is up and there is no error in logs . but iam getting below error in login page
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Hi ,
This is an indication that ECM cs.ear deployment has failed for some reason . To get the exact reason either check ucm_server1.log or start the server from command line and there the errors will be shown.
Copy the core part and post it .
Thanks
srinath

Error : 404 not found while opening Ciscoview from Campus manager with LMS 3.2

Hi Friends,
While opening ciscoview from Campus Manager Topology, getting error 404 not found by apache web server. pls guide me to resolve this issue if anyone faces the same situation earlier.
Thnx

The name of Enterprise Manger service is em you can find it under deployments in weblogic console. Its status should be active and ok.
Have you tried this
http://technasir.blogspot.com/2013/04/enterprise-manger-is-not-working.html
regards
Nasir

URGENT!!! calling crystal reports from oracle forms 10g

Is it possible to call crystal reports from oracle forms 10g?
Can someone help to answer how, if there is a solusion, to call crystal reports from oracle forms 10g.
Please provide codes with details showing step by step.
Thanks

hi
try something like this.
DECLARE
charWinHandle VARCHAR2(50);
numWinHandle NUMBER;
BEGIN Set_Application_Property(Cursor_Style,'BUSY');
charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
numWinHandle := To_Number(charWinHandle);
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowParentHandle
:= numWinHandle;
:Item('Control.CrystalReport1').OCX.Crystal.Crysta lReport.WindowState := 2;
:Item('CONTROL.CRYSTALREPORT1').OCX.Crystal.Crysta lReport.Connect
:= 'DSN=;UID=' || Get_Application_Property(UserName) ||
';pwd=' || Get_Application_Property(password) || ';dsq=;';
Crystal_CrystalCtrl.ReportFileName( :Item('Control.CrystalReport1').interface,
'C:\Sample_Rep.Rpt' );
Set_Window_Property( Forms_Mdi_Window, Window_State,Maximize );
Set_Window_Property( 'MAIN', Window_State, Maximize );
:reptitle := 'Report Preview Window';
numWinHandle := Crystal_CrystalCtrl.PrintReport( :Item('Control.CrystalReport1').interface );
Set_Application_Property(Cursor_Style,'DEFAULT');
END;NOTE: Change the report name and path according to your required file name and path in
the "Crystal_CrystalCtrl.ReportFileName" method call. Also, the connection string shown
assumes that you will use the current USER and PASSWORD for the Form.
- To make the above Form generic so that you can run any Crystal report from it, then create
a parameter for the report name and pass it to the Form using CALL_FORM from any other Form.
Then just replace the file name with the passed parameter.
-. Run the Form
If its correct/helpful please mark it thanks.
sarah
Edited by: S@R@h on Nov 27, 2009 6:33 AM

Calling a report from oracle form 10g

how to call a report from oracle form 10g

Please see the link:
http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf

Error 404 -- NOT FOUND when running a form in form 11g

Hi All,
I got this problem when I run the forms using internet explorer.
I work on Forms 11g which uses weblogic 10.3 for web deployment of the forms.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Can any one tell me where it went wrong.
Thanks

Let's start by clearing up some confusion.
PORTS
In version 11.1.1.x here are how the common ports are defined by default:
1. HTTP Server - 8888
2. WLS_FORMS - 9001
3. WLS_REPORTS - 9002
4. WLS Admin Server - 7001
So, if you understand how ports work in general, you should see that there are two ways to run a form. You can either go through HTTP Server or call WLS_FORMS directly. This means that both of the following would work, although one would be a direct path and the other would route the request through the HTTP Server:
<li>http://ie1fdtfc5zl1s:9001/forms/frmservlet?config=frmdemo
<li>http://ie1fdtfc5zl1s:8888/forms/frmservlet?config=frmdemo
Port 7001, will always be the Admin Server port by default for the Classic domain. By default, the only thing you can do from here is access EM or WLS Console.
As for the tns issue, by default, both the Builder and runtime will expect to find tnsnames.ora in the Instance Home \config so be sure you are adding the correct entries to the correct file.
You can hard code a path to the file which you prefer be used by setting TNS_ADMIN in default.env (e.g. TNS_ADMIN=C:\Oracle\mytnsdirectory). This will apply only to running forms and not the Builder.
Also, here is something which often is confusing to many people.... just because you launched your form from the Builder does not mean that the running form has anything to do with the Builder at that point. In other words, when you click on the RunForm button in the builder all you are doing is passing a url to a browser. The browser and the form are not using any of the Builder's settings except those which may have been passed in the URL (e.g. username/password). ALL running forms are considered "runtime". This means all of the environment configuration information for a running form will need to be set in default.env. The Builder, on the other hand will rely on the System variable, Windows Registry (or shell if on Unix).

From RFC 2068 (10.4.5 404 Not Found)

Dear all,
I have installed Oracle Weblogic and 11G Forms in Windows server 2003 . But when I have tried to run a form Browser shows a error message .
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Where's the problem ? I have successfully run 11g forms with 10g Database on Windows 7 PC.

Please check Apache log files for details about the error.
Thanks,
Hussein

Call Oreacle report from Oracle form

Hi,
I need call a Oracle report from Oracle Form and found the the following procedure from this forum. I have 2 parameters 'start_date' and 'end_date' passing to called report. The following example just have onle parameter
'departmentno' passing. Is that mean I need to call add_parameter twice like the following?
add_parameter(plid, ''start_date' , TEXT_PARAMETER,:control.start_date);
add_parameter(plid, ''end_date' , TEXT_PARAMETER,:control.end_date);
In the following example:
add_parameter(plid, 'departmentno', TEXT_PARAMETER,to_char(:dept.deptno));
Thanks for clarification!!
Michael
PROCEDURE pass_parameter
IS
plid paramlist;
the_param varchar2(15) := 'tmpdata';
BEGIN
plid := get_parameter_list(the_param);
/* check if 'tmpdata' exists */
IF NOT id_null(plid) THEN
destroy_parameter_list(plid);
END IF;
/* if it does destroy it */
plid := create_parameter_list(the_param);
/* create it afresh */
add_parameter(plid, 'departmentno', TEXT_PARAMETER,to_char(:dept.deptno));
/* associate the param in the form with the param in the report */
add_Parameter(plid, 'PARAMFORM', TEXT_PARAMETER, 'NO');
/* to suppress the parameter form displaying */
run_product(REPORTS, /* product name */
'formrep.rdf', /* Oracle Reports module */
SYNCHRONOUS, /* communication mode */
RUNTIME, /* execution mode */
FILESYSTEM, /* location of the Reports module */
plid, /* handle to the parameter list */
null
END;

this my code on when_button_press
declare
rec_grp recordgroup;
col1 groupcolumn;
col2                    groupcolumn;
col3                    groupcolumn;
col4                    groupcolumn;
col5                    groupcolumn;
col6                    groupcolumn;
col7                    groupcolumn;
col8                    groupcolumn;
pl_id paramlist;
i number :=1;
begin
rec_grp := find_group('emp_rec');
if not id_null(rec_grp) then
delete_group(rec_grp);
end if;
rec_grp := create_group('emp_rec');
col1 := add_group_column('emp_rec','Empno',CHAR_COLUMN,8);
col2 := add_group_column('emp_rec','Ename',CHAR_COLUMN,30);
col3 := add_group_column('emp_rec','job',CHAR_COLUMN,15);
col4 := add_group_column('emp_rec','Mgr',CHAR_COLUMN,8);
col5 := add_group_column('emp_rec','Hiredate',DATE_COLUMN,10);
col6 := add_group_column('emp_rec','Sal',CHAR_COLUMN,10);
col7 := add_group_column('emp_rec','comm',CHAR_COLUMN,10);
col8 := add_group_column('emp_rec','Deptno',CHAR_COLUMN,4);
loop
go_block('emp_r');
go_record(i);
add_group_row(rec_grp,i);
set_group_char_cell('emp_rec.empno',i,:emp_r.empno);
set_group_char_cell('emp_rec.ename',i,:emp_r.ename);
set_group_char_cell('emp_rec.job',i,:emp_r.job);
set_group_char_cell('emp_rec.mgr',i,:emp_r.mgr);
set_group_date_cell('emp_rec.Hiredate',i,:emp_r.Hiredate);
set_group_char_cell('emp_rec.sal',i,:emp_r.sal);
set_group_char_cell('emp_rec.comm',i,:emp_r.comm);
set_group_char_cell('emp_rec.deptno',i,:emp_r.deptno);
i := i + 1;
     exit when :system.last_record='TRUE';
end loop;
pl_id := get_parameter_list('para1');
if not id_null(pl_id) then
destroy_parameter_list(pl_id);
end if;
pl_id := create_parameter_list('para1');
add_parameter(pl_id,'Q_EMP',DATA_PARAMETER,'emp_rec');
add_parameter(pl_id,'paramform',text_parameter,'no');
run_product(REPORTS,'D:\ora\daily.RDF',synchronous,runtime,filesystem,pl_id,NULL);
end;
---------and this is my reprot query----------
select Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,Deptno
from emp
where empno=:emp_rec
order by empno;
but it show error at run time
Rep-1340
plzz solve this problem to me
fahad

Calling web service from oracle forms 10g

Problem Description:
I'm following the steps as per the doc:
http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html
to create a java stub to call external web service and then use java importer in oracle forms to call this web service from oracle forms.
WSDL for external web service used is http://gend:83/DesignService.svc?wsdl
The service was developed by us.
Calling the web service using JDeveloper works fine but when I complie in Oracle Forms it returns wrong number of types of arguments in call SENDHELLO.
The code from oracle form to call web service is as below:
DECLARE
jo ora_java.jobject;
xo ora_java.jobject;
rv varchar2(2000);
ex ora_java.jobject;
str varchar2(100);
BEGIN
jo := GendServiceClient.new;
rv := GendServiceClient.sendHello('Nora');
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
message(Exception_.toString(ex));
END;
Any help/ideas on this is greatly appreciated. Thanks.
Edited by: KE Nora Loera on Jun 1, 2012 1:24 PM

My primary skill is PL/SQL but the only information I found on Oracle's site to call a web service from a 10g Form was creating a jar file and importing the java class. Since I don't want to ask our corporate IT to make changes on the UNIX box for the jar files I went a different route.
I use UTL_HTTP.BEGIN_REQUEST to call a URL then load I load the data to a table as a CLOB since we have more than 4000 characters. Now I need to parse the XML and load it into a form. I have never done this so if there is a helpful site please let me know. I have looked at several sites but none do what I want.
Thanks

Calling web service from oracle forms fails with ORA_JAVA.JAVA_ERROR

Problem Description:
I'm following the steps as per the doc:
http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html
to create a java stub to call external web service and then use java importer in oracle forms to call this web service from oracle forms.
WSDL for external web service used is http://www.webservicex.net/CurrencyConverter.asmx?wsdl
Calling the web service using JDeveloper works fine but from Oracle Forms returns ORA_JAVA.JAVA_ERROR; Unable to call out to Java, Invalid object type for argument 1
The code from oracle form to call web service is as below:
DECLARE
jo ora_java.jobject;
rv ora_java.jobject;
ex ora_java.jobject;
outString varchar2(2000);
BEGIN
jo:= CurrencyConvertorStub.new;
--This will get the exchange rate from US Dollars to UK Sterling.
rv:= CurrencyConvertorStub.ConversionRate(jo,'CAD','USD');
message (float_.floatValue(RV));
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
outString := Exception_.toString(ex);
message(outString);
END;
Any help/ideas on this is greatly appreciated. Thanks.

Yes, it is the message line - so basically this call fails => rv:= CurrencyConvertorStub.ConversionRate(jo,'CAD','USD'); and control goes in the exception block
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
Below is the code from java stub that was generated using JDeveloper by using web services stub/skeleton and associating the WSDL
public Double ConversionRate(String FromCurrency, String ToCurrency) throws Exception
URL endpointURL = new URL(endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
String wrappingName = "ConversionRate";
String targetNamespace = "http://www.webserviceX.NET/";
Vector requestData = new Vector();
requestData.add(new Object[] {"FromCurrency", FromCurrency});
requestData.add(new Object[] {"ToCurrency", ToCurrency});
requestBodyEntries.addElement(toElement(wrappingName, targetNamespace, requestData));
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.setSOAPTransport(m_httpConnection);
msg.send(endpointURL, "http://www.webserviceX.NET/ConversionRate", requestEnv);
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
Vector responseData = responseBody.getBodyEntries();
return (Double)fromElement((Element)responseData.elementAt(0), java.lang.Double.class);
}

Calling Crystal Reports from Oracle Forms 10G

Hi everyone,
I am trying to call a crystal report from Oracle Forms 10G.
I have a button on my Form which when clicked calls a Crystal Report which the uaser then wants to save as a PDf file.
Can someone please send me the code to do this and also the exact steps that are to be followed.
Thanks
Fm.

Hi Andreas,
I am trying to call the crystal report from an Oracle Form using a URL. No batch file is being used here.
I am looking for a peice of code similar to run_product or run_report built in in Oracle which calls an Oracle report from an Oracle Form.
Also I dont want to display the report on a screen or a window in Oracle Forms. I would like it to run just as we run an Oracle Report from an Oracle Form.
Is that possible ? If yes please let me know the steps to do this.
Thanks
Faiz
Edited by: IQ on May 13, 2011 11:38 AM

Calling a procedure from Oracle Forms with OUT parameter

HI,
Can anyone tell me in detail how to call a procedure with OUT parameters from Oracle Forms 6i ?
Thanks in advance.

Hello,
Just provide the out parameter in the call:
Declare
amount number; -- OUT number argument populated by the procedure
Begin
-- call the X procedure --
x( amount ) ;
End;Francois

Calling Sql*Loader from oracle Form builder

How do i call sql* loader from my forms to import the external data in different formats into my existing database?
Specify the flexibility of sql* loader to import external data from .txt files or .xls files.
Would be thankful if certain examples are given along with the answer.

Hi,
1. First you have to create seperate ctl (Control files) which maps to different file formats
2. Using Oracle Forms,
2a) You can use the 'HOST' command to execute the command line ie. In this case executing
SQL*Loader script
2b) You also have the feature in ORACLE forms to read text files and load the data into
ORACLE db.
This can be achieved by using TEXT_IO package which comes with ORACLE Forms.
Hope this helps
Ta
Shailender

Dynamic Pages & Parameters - 404 Not Found Error

I have the following dynamic page:
declare
M_subject varchar2(2000):= :message_subject;
begin
htp.print(''||M_subject||'');
htp.print('This is a Test - Passing a parameter to a Dynamic Page');
htp.p('Value: ' || M_subject);
end;
I also have another dynamic page that calls the above page and passes a parameter to it. And it works,..that is, the parameter gets passed to the page above, is assigned to M_subject and correctly prints on the screen.
The problem is that i want to do more then just simply print the variable, in particular, i'd like to use it in a sql query.
But when i add the following code into the above page
thebody varchar(2000);
select subject into thebody from MyTable where subject = M_subject;
htp.print(''||thebody||'');
it won't work. It compiles correctly but when i run the first dynamic page and call this 2nd page, i get a 404 Not Found error. Very strange because the page is definitely there.
So is there anything obvisous that i'm not doing correctly? Is my query not structured properly? Why can't i use this variable for something useful instead of just simply printing it on the screen?
Any comments, suggestions, fixes or ideas would be greatly appreciated.
thanks
chris

Put debug on on the application server for the dad you're using.
The error you are encountering will appear instead of the 404 not found error.
How:
in the home of your application server update the file
$ashome/Apache/modplsql:/conf/dads.conf
put ' PlsqlErrorStyle DebugStyle' in the dad you're using.
restart the application server, retry your dynamic page and the sql error will appear.

Call Forms Forum from Oracle Forms Main Page - Error 404 Not Found

Similar Messages

Maybe you are looking for