CALL_FUNCTION_OPEN_ERROR
Hi experts,
We are have an issue with the RFC connection. it gives a short dump with CALL_FUNCTION_OPEN_ERROR Error when opening an RFC connection when the number of users goes up. The RFC is link/gateway connection is not getting disconnected when the RFC is done with the execution. so the number of connections are going up and once the max is reached it starts dumping.
Is there a way to stop/kill the RFC connection once the execution of RFC is complete.
ST22 Error analysis
An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=249#Active connection table is full.
Please try again later "
Status of connection.... "CODE=CM_DEALLOCATED_ABEND -1 -1 SAPCODE=249 CONV="
Internal error code.... "RFC_IO5"
Is there a SM59 RFC connection setting which says disconnect once the RFC execution is done ?
Any inputs are welcome,
Regards
Diwakar
Hi,
Yes I was able to solve this,
Whenever I call a RFC the connection was not being closed when the execution of the RFC is complete . So I have to write the code to close that instance of RFC connection. I used the Function module 'RFC_CONNECTION_CLOSE' to close the connection whenever I call a RFC.
Thanks
Divakar
Similar Messages
-
CALL_FUNCTION_OPEN_ERROR in CRM while trying to connect to ECC system
Hi All,
We are having issues while connecting to ECC system from CRM at specific point of time.
It occurred only once yesterday . Since it is a production system, we need to investigate the cause of the issue.
Upon checking the logs, I can see dumps in ST22 stating CALL_FUNCTION_OPEN_ERROR while trying to connect to ECC.
This issue has been faced by multiple users at the same time.
Both CRM and ECC are in the same server . There are no errors in ECC system ,
The error description says
Error opening RFC connection
Error text........... "Group USER not found"
Description.......... "LgIGroupX"
The response time is fine for the system and during the time when the error occurred.
Both the systems are in kernel 720 patch level 416.
There are no errors in dev_rd and dev_ms as well.
The errors in trace file also give information that ECC system cannot be reached.
However our ECC system was available , up and running and there were no issues at that time with ECC.
I have attached the dump, kernel and patch level details , work process trace files and the response times.
Please suggest.
Thanks,
Sowmya.LB: Hostname or service of the message server unknown#DEST =PUCCLNT220#MSHOST
=puc.apps.eon.com#R3NAME =PUC#GROUP =USER"
disp+work information
kernel release 720
kernel make variant 720_EXT_REL
compiled on Linux GNU SLES-11 x86_64 cc4.3.4 use-pr121116 for linuxx86_64
compiled for 64 BIT
compilation mode UNICODE
compile time Feb 16 2013 02:50:12
update level 0
patch number 416
source id 0.416
Error from work process trace file
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
A reached MAX_RUDILOCKS for (user: L13526 , ta: ), sending RUDILOCK_RESET
M
M Mon Apr 20 15:48:09 2015
M ThPlgTimeout: ThPlgTimeout for plugin T144/U17974
A
A Mon Apr 20 15:58:59 2015
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c 9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
A
A Mon Apr 20 15:59:02 2015
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c 9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c 9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
LB: Hostname or service of the message server unknown
DEST =PUCCLNT220
MSHOST =puc.apps.eon.com
R3NAME =PUC
GROUP =USER
[abrfcio.c 9213]
A {root-id=441EA15C8F181ED4B9E4168F16E66417}_{conn-id=441EA15C8F181ED4B9E416A941234417}_1 -
RFC call from portal gives dump call_function_open_error
Hi all ,
We have a RFC function module where standarad BAPI BAPI_ENTRY_SHEET_CREATE IS USED
where a dump call_function_open_error occurs when the rfc is called from portal , while on r3 it works fine.
I wanted to know if somebody has faced this kind of problem anytime and what can be the possible solution .
There is no problem with data , there is no problem with RFC where can be the problem ?
Please suggest >Hi Bhanu,
Can be helpful
too many dumps in production Env: CALL_FUNCTION_OPEN_ERROR -
Load balancing CALL_FUNCTION_OPEN_ERROR
HI,
WE ARE TRYING TO TRANSFER HUGE DATA FROM CRM TO ANOTHER CRM SERVER, AT SOME POINT OF TIME NO USERS WERE ABLE TO LOGIN WITH SHORT DUMP..
CALL_FUNCTION_OPEN_ERROR
KINDLY HELP US TO OVERCOME THIS ERROR.
JAGHi,
One reason could be there is no proper authorization to use the function module.
I suggest you better debug the program in production (if you have authorization) and analyze the error.
Regards,
Subramanian -
A lot of CALL_FUNCTION_OPEN_ERROR in production environment
Hello
We have a lot of CALL_FUNCTION_OPEN_ERROR in our production environment.
An error occurred when executing a Remote Function Call.
"Protocol error when communicating with SAPGUI."
Status of connection.... "RFC DRV=GUI INPUT"
Internal error code.... "RFC_IO20"
When communicating with SAPGUI, a protocol error was detected.
The termination occurred in the ABAP program "SAPLOLEA" in
"AC_FLUSH_CALL_INTERNAL".
The main program was "RSPOLPRF ".
WE get these errors when user have 5 sessions open and then they start a printout.Hi,
I am not sure about what is causing the roblem in your system. Did try to find the error on the forum. Most of them refer sapnote 1079446 . Kindly have a look if this can be of any help.
Thanks,
Bhavnesh -
Runtime Error: CALL_FUNCTION_OPEN_ERROR
Hi all,
we are facing a short dump while executing an RFC Function Module:
Please note the trace file for the short dump:
Error analysis
An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=497#Unable to determine host add
NiHostToAddr failed "
Status of connection.... "CODE=CM_PRODUCT_SPECIFIC_ERROR -1 -1 SAPCODE=497
CONV= "
Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
and resolve the error, contact your system administrator.
Last error logged in SAP kernel
Component............ "NI (network interface)"
Place................ "SAP-Gateway on host GOLITSAPD17 / sapgw01"
Version.............. 38
Error code........... "-2"
Error text........... "hostname 'golitsapd09.go-d01.local' unknown"
Description.......... "NiHsLGetNodeAddr: hostname cached as unknown"
System call.......... " "
Module............... "nixxhsl.cpp"
Line................. 223
After doing the initial analysis of this short dump and also doing the Connection Test using the transaction code SM59, the following error log is generated:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: hostname 'golitsapd09.go-d01.local' unknown
Error Details LOCATION: SAP-Gateway on host GOLITSAPD17 / sapgw01
Error Details DETAIL: NiHsLGetNodeAddr: hostname cached as unknown
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 2701
Error Details MODULE: nixxhsl.cpp
Error Details LINE: 223
Error Details RETURN CODE: -2
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Wed Mar 25 03:34:07 2009
Error Details VERSION: 38
Please give your valuable inputs in order to solve this problemCheck note 710920.
Also check this.
[Error: CALL_FUNCTION_OPEN_ERROR|https://forums.sdn.sap.com/click.jspa?searchID=24006645&messageID=6319578] -
ABAP/4 processor: CALL_FUNCTION_OPEN_ERROR
Has anyone any idea why this <b>Abend message</b> <b>ABAP/4 processor: CALL_FUNCTION_OPEN_ERROR</b> is displayed.
I have a programs wich fails at a RFC call and the message (type -A) displayed is
ABAP/4 processor: CALL_FUNCTION_OPEN_ERROR.
Thanks.Hi,
maybe the function you call on the remote system is not available?
Kostas -
Dump in Production due to CALL_FUNCTION_OPEN_ERROR???
Hi all,
I am getting lot of dumps in Production with following details
What happened?
Error in ABAP application program.
The current ABAP program "SAPLOLEA" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An error occurred when executing a Remote Function Call.
"Protocol error when communicating with SAPGUI."
Status of connection.... "RFC DRV=GUI INPUT"
Internal error code.... "RFC_IO20"
When communicating with SAPGUI, a protocol error was detected.
Any have Idea for this ?Dear Vipin
That is a very complicated error, difficult to analyze.
First I would recommend an update of the SAP GUI onto the newest patch
level. Additionally please update the SAP kernel to the latest patchlevel and the RFC libraries!
If that all should not help, deeper analyses are to be made so in your system.
For that you should then create a support message.
Best regards
Sven -
Hi,
In our CRM systems, While opening a business activity through transaction CRMD_ORDER there
comes a short dump in the production system showing "Call Function Open
Error" mentioning error while RFC connection in Program SAPLOLEA
in "AC_FLUSH_CALL_INTERNAL".
The SP levels are below:
SAP_ABA 700 0008
SAP_BASIS 700 0008
PI_BASIS 2005_1_700 0008
ST-PI 2005_1_700 0004
SAP_BW 700 0008
SAP_AP 700 0005
BBPCRM 500 0005
ST-A/PI 01J_CRM500 0000
VIRSANH 520_700 0005
Please give me your insights.
Thanks
PSHi,
In our CRM systems, While opening a business activity through transaction CRMD_ORDER there
comes a short dump in the production system showing "Call Function Open
Error" mentioning error while RFC connection in Program SAPLOLEA
in "AC_FLUSH_CALL_INTERNAL".
The SP levels are below:
SAP_ABA 700 0008
SAP_BASIS 700 0008
PI_BASIS 2005_1_700 0008
ST-PI 2005_1_700 0004
SAP_BW 700 0008
SAP_AP 700 0005
BBPCRM 500 0005
ST-A/PI 01J_CRM500 0000
VIRSANH 520_700 0005
Please give me your insights.
Thanks
PS -
Customer creation with Business Partner Error
Hello Experts,
I am a Functional consultant and trying to create Customer which has to create a Business Partner in one of the test system. All the config to create Business Partner is completed.
When trying to create customer it throws a RFC connection error. I have pasted the dump details below. Please help me to solve the issue.
Category
ABAP Programming Error
Runtime Errors
CALL_FUNCTION_OPEN_ERROR
ABAP Program
CL_RPM_FES_BUFFER_MANAGEMENT==CP
Application Component PPM-PFM
Date and Time
22.09.2014 19:43:45
Short text
Error when opening an RFC connection ("CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_RPM_FES_BUFFER_MANAGEMENT==CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThSAPOCMINIT' : cmRc=20 thRc=236#SAP gateway connection failed. Is
SAP gateway started? "
Status of connection.... "CODE=CM_PRODUCT_SPECIFIC_ERROR -1 -1 SAPCODE=236
CONV= "
Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
and resolve the error, contact your system administrator.
Last error logged in SAP kernel
Component............ "NI (network interface)"
Place................ "SAP-Gateway on host KNACKS06 / sapgw01"
Version.............. 40
Error code........... "-10"
Error text........... "partner 'knacks06:sapgw01' not reached"
Description.......... "NiPConnect2: 54.201.94.167:3301"
System call.......... "connect"
Module............... "nixxi.cpp"
Line................. 3286
The error reported by the operating system is:
Error number..... 10060
Error text....... "WSAETIMEDOUT: Connection timed out"
Check the host name and service that define the remote program. Are
these parameters correct? You can use the "ping" command to check
whether the specified host is reachable. If the remote program is an
application server, check whether it is running and whether the local
gateway of this server is listening for the specified service. If the
service is sapgw<nn>, the remote server must run with SAPSYSTEM number
<nn>.
Trigger Location of Runtime Error
Program CL_RPM_FES_BUFFER_MANAGEMENT==CP
Include CL_RPM_FES_BUFFER_MANAGEMENT==CM00J
Row 2
Module type (METHOD)
Module Name CHANGES_BY_ORG
Source Code Extract
Line SourceCde
1 METHOD changes_by_org.
>>>>> CALL FUNCTION 'RPM_FES_RECALCULATE_BY_ORG' STARTING NEW TASK 'RPM_FES_RECALCULATE_BY_ORG'
3 EXPORTING
4 old_image = old_image
5 new_image = new_image
6 plog_tab = plog_tab
7 tb_plog_tab = tb_plog_tab
8 * IMPORTING
9 * ET_MSG =
10 * EV_RC =
11 .
12
13 ENDMETHOD.
Active Calls/Events
No. Ty. Program Include Line
Name
13 METHOD CL_RPM_FES_BUFFER_MANAGEMENT==CP CL_RPM_FES_BUFFER_MANAGEMENT==CM00J 2
CL_RPM_FES_BUFFER_MANAGEMENT=>CHANGES_BY_ORG
12 METHOD CL_IM_RPM_FES_ORG_CHANGES=====CP CL_IM_RPM_FES_ORG_CHANGES=====CM004 4
CL_IM_RPM_FES_ORG_CHANGES=>IF_EX_HRBAS00INFTY~IN_UPDATE
11 METHOD CL_EX_HRBAS00INFTY============CP CL_EX_HRBAS00INFTY============CM004 35
CL_EX_HRBAS00INFTY=>IF_EX_HRBAS00INFTY~IN_UPDATE
10 FORM SAPLRHAP LRHAPF1R 110
UPDATE_DATABASE
9 FUNCTION SAPLRHAP LRHAPU08 19
RH_BASE_UPDATE_DB_DIALOG
8 FORM SAPLRHAP LRHAPF30 248
UPDATE_PLOG
7 FUNCTION SAPLRHAP LRHAPU40 31
RH_UPDATE_DATABASE
6 FORM SAPLBUBA_4 LBUBA_4F31 14
HR_DATA_SAVE
5 FORM SAPMSSY0 SAPMSSY0 504
%_PROCESS_P_O_C
4 FORM SAPMSSY0 SAPMSSY0 249
%_COMMIT
3 FORM SAPMF02D MF02DFS0 511
SCHLUSS_BEARBEITUNG
2 FORM
SAPMF02D
MF02DFO0
2335
OKCODE_BEARBEITEN
1 MODULE (PAI) SAPMF02D
MF02DI00
5632
OKCODE_BEARBEITEN
Regards,
BV PATILHi,
It would make more sense to speak to a technical resource who is familiar with your system. Based on the error, it looks like you have connection issues in your landscape - I'm assuming you have CRM & ERP systems communicating and it looks like there is a problem with their connectivity. Best get some basis resource to help you out.
cheers,
G. -
XI: RFC -- JDBC communication deep structure
Hello to all!
I've got a RFC <--> JDBC szenario. Insert an update statements work fine.
Now I want to implement a "SELECT"-statement. Therefore the XML-SQL-statements needs a <key>-tags such as:
<key>
<col1>value</col1>
<col2>value</col2>
</key>
<key>
<col2>value</col2>
</key>
To represent the key structure in ABAP I did the following steps
- I created a structure "keyvalue" with fields: column, value (for <col>value</col>),
- a table type "andkey" with line type "keyvalue",
- another table type "orkey" with linetype "andkey"
I use the table type "orkey" as exporting parameter for the element "selectkey" in my rfc funtion module :
CALL FUNCTION 'FUBA_JDBC' DESTINATION 'XI'
EXPORTING
selectkey = it_key
TABLES
outtab = it_outtab
RESPONSE =
My problem is now, that the rfc function module creates a shortdump: CALL_FUNCTION_OPEN_ERROR
Does anybody know a solution? Could I use the table type "orkey" in the rfc?
Thanks for your suggestions,
ChristianChristian,
This should probably be posted in the abap forum, you can get some help there.
Regards
Ravi Raman -
Syntax Error, don't know how to solve
I've got an syntax error in the following report. The compiler says: "SPACE" could not be interprated.
It focus this code section:
rp-provide-from-last p0001 space keyda keyda.
rp-provide-from-last p0002 space keyda keyda.
Here you can see the complete report:
*& Report Z_SAP_HR_LDAP *
REPORT Z_SAP_HR_LDAP USING DATABASE PNP.
DATA: PLVAR LIKE OBJEC-PLVAR,
OBJID LIKE HROBJECT-OBJID,
KEYDA LIKE PLOG-BEGDA,
P_OBJECTS LIKE HROBJECT OCCURS 0,
P_OBJECTS_WA LIKE HROBJECT,
S_OBJECTS LIKE HROBJECT OCCURS 0,
S_OBJECTS_WA LIKE HROBJECT,
I1001_ITAB LIKE P1001 OCCURS 0 WITH HEADER LINE,
I1001_ITAB2 LIKE P1001 OCCURS 0 WITH HEADER LINE,
* LDAPDESTINATION LIKE LDA_TYPES-LDAPDESTINATION,
* LDAPSERVER LIKE LDA_TYPES-LDAPSERVER,
ldapinitialrun like lda_types-flag,
LOGSYS LIKE TBDLS-LOGSYS,
ERRORS LIKE BAPIRET2 OCCURS 0,
ERRORS_WA LIKE BAPIRET2.
* structure for short ldap-attributes
* fieldnames must be equal to basis strucutre LDA-ATTR_S (for RFC_CALL)
TYPES: BEGIN OF TS_LDAP_ATTR_S,
PERNR LIKE LDA_TYPES-PERNR,
ATTR_TAB LIKE LDA_TYPES-ATTR_TABNAME,
ATTR_FIELD LIKE LDA_TYPES-ATTR_FIELDNAME,
VALUE LIKE LDA_TYPES-VALUE_S,
END OF TS_LDAP_ATTR_S.
data: attributes type ts_ldap_attr_s occurs 0,
attributes_wa type ts_ldap_attr_s.
infotypes: 0001, 0002.
tables: pernr, rfcdes.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_TEST default 'X' AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK B1.
Parameters: LDAPSRV Default 'SAPHRLDAP' LIKE LDA_TYPES-LDAPSERVER,
LDAPDEST Default 'LDAPDEST' LIKE rfcdes-rfcdest.
at selection-screen.
clear: p_objects[], s_objects[], attributes[].
CALL FUNCTION 'RH_GET_PLVAR'
IMPORTING
PLVAR = PLVAR
EXCEPTIONS
no_plvar = 1
OTHERS = 2.
if sy-subrc <> 0.
MESSAGE E015(HRLDAP).
endif.
KEYDA = sy-datum.
get pernr.
rp-provide-from-last p0001 space keyda keyda.
rp-provide-from-last p0002 space keyda keyda.
ATTRIBUTES_WA-PERNR = p0001-pernr.
* lastname
attributes_wa-attr_tab = 'EMPLOYEE'.
attributes_wa-attr_field = 'LASTNAME'.
attributes_wa-value = p0002-nachn.
append attributes_wa to attributes.
* firstname
attributes_wa-attr_tab = 'EMPLOYEE'.
attributes_wa-attr_field = 'FIRSTNAME'.
attributes_wa-value = p0002-vorna.
append attributes_wa to attributes.
* sAMAccountName
attributes_wa-attr_tab = 'EMPLOYEE'.
attributes_wa-attr_field = 'SAMACCOUNTNAME'.
* Using the employee number a unique name is created
* for the sAMAccountName
concatenate E p0001-pernr into attributes_wa-value.
append attributes_wa to attributes.
* other attributes have to added here.
* for each additional attribute an appropriate field
* has to defined in the structure EMPLOYEE
* for example you can choose the following:
* attributes_wa-attr_tab = 'EMPLOYEE'.
* attributes_wa-attr_field = 'TELEPHONE'.
* if you want to transfer the telephone number
* of an employee from SAP HR to Active Directory
* In the web Application Server an appropriate mapping
* has to be defined using transaction LDAP for each new
* attribute (here called TELEPHONE).
end-of-selection.
* get own logical system
CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
IMPORTING
OWN_LOGICAL_SYSTEM = LOGSYS
EXCEPTIONS
OWN_LOGICAL_SYSTEM_NOT_DEFINED = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
* TODO: Komprimierung sy-mandt: 3 -> 2 Stellen !!!
CONCATENATE SY-SYSID SY-MANDT INTO LOGSYS.
ENDIF.
loop at attributes into attributes_wa.
write: / ATTRIBUTES_WA-PERNR , attributes_wa-attr_tab.
write: attributes_wa-attr_field ,attributes_wa-value.
endloop.
IF P_TEST = 'X'.
EXIT.
ENDIF.
* send attributes to ldap client
* send attributes
CALL FUNCTION 'SPLDAP_RECEIVE_ATTRIBUTES'
DESTINATION LDAPDEST
EXPORTING
LOGSYS = LOGSYS
SERVERID = LDAPSRV
ATTRIBUTES_S = attributes[]
INITIAL_RUN = LDAPINITIALRUN
* ATTRIBUTES_L = TOTAL_ATTRS_L[]
* ATTRIBUTES_X = TOTAL_ATTRS_X[].
IMPORTING
RETURN = ERRORS[].
IF NOT ERRORS[] IS INITIAL.
READ TABLE ERRORS INDEX 1 INTO ERRORS_WA.
MESSAGE ID ERRORS_WA-ID TYPE ERRORS_WA-TYPE
NUMBER ERRORS_WA-NUMBER
WITH ERRORS_WA-MESSAGE_V1 ERRORS_WA-MESSAGE_V2
ERRORS_WA-MESSAGE_V3 ERRORS_WA-MESSAGE_V4.
ENDIF.If i test this report, he can access the HR employee data an read my selection but if i run it really the following error occurs:
Laufzeitfehler CALL_FUNCTION_OPEN_ERROR
aufgetreten am 10.05.2005 um 22:22:26
"program LDAP_SAP_ADS_DC_1 not registered" / &CT.
He stands at the following line:
> CALL FUNCTION 'SPLDAP_RECEIVE_ATTRIBUTES'
I think it's a problem with that function.
I found this function in my R/3 System. -
Material Group Replication from ECC
Dear SRMers,
System Landscape : ECC 6.0 and SRM 5.0.
I am doing a material group replication from ECC to SRM using the DNL_CUST_PROD1 customizing object. Before the replication ECC was trying to confirm the target RFC destination(SRM) by prompting a logon. I logged in as myself and the system gave a CALL_FUNCTION_OPEN_ERROR.
I defined the CRM Consumer as SRM in the CRM middleware parameters..
My question is do we need to define the User SRM in SU01 and when ECC tries to confirm the target RFC destination, do we need to login as the SRM User ?
Points will be rewarded for answers.
Thanks in advance,
BobHi,
The RFC user which you define in the SRM RFC detsination has to be obviously as SU01 user in SRM.Also the RFC user need to have SAP_ALL and SAP_NEW profile attached.See note 642202 for details.
Also Check:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/84/d3eb4190966024e10000000a1550b0/frameset.htm
BR,
Disha.
Pls reward points for useful answers. -
Hi Gurus
Here is a list of our system dumps in September and October. I would like if any of you would analyze these for any trends or differences.
The reason is that we upgraded from BW 3.1 to 3.5 by the end of September. We need to know if this has lead to a signifiacant change in the types of dumps we are receiving.
<b>Pre Upgrade</b>
<b>Runtime error Count</b>
MESSAGE_TYPE_X 214
DYNPRO_SEND_IN_BACKGROUND 43
STORAGE_PARAMETERS_WRONG_SET 41
CALL_FUNCTION_SEND_ERROR 29
UNCAUGHT_EXCEPTION 17
START_CALL_SICK 14
TIME_OUT 12
RAISE_EXCEPTION 9
TYPELOAD_LOST 8
CALL_FUNCTION_OPEN_ERROR 7
DBIF_RSQL_INVALID_RSQL 5
DBIF_RSQL_SQL_ERROR 5
RFC_ATTACH_GUI_FAILED 4
IMPORT_FORMAT_ERROR 4
DBIF_DSQL2_SQL_ERROR 4
DBIF_SETG_SQL_ERROR 4
LOAD_PROGRAM_LOST 4
TSV_TNEW_PAGE_ALLOC_FAILED 4
RABAX_CALLING_RABAX 3
DBIF_REPO_SQL_ERROR 2
SYSTEM_CORE_DUMPED 2
OBJECTS_OBJREF_NOT_ASSIGNED 2
CONNE_IMPORT_ILL_OBJECT_TYPE 1
ITAB_DUPLICATE_KEY 1
SAPSQL_INVALID_TABLENAME 1
DBIF_RTAB_SQL_ERROR 1
DBIF_DSQL2_OBJ_UNKNOWN 1
SAPSQL_ARRAY_INSERT_DUPREC 1
GETWA_NOT_ASSIGNED 1
<b>Post Upgrade </b>
<b>Name of runtime error Count</b>
MESSAGE_TYPE_X 211
DBIF_RSQL_SQL_ERROR 16
STORAGE_PARAMETERS_WRONG_SET 11
OBJECTS_OBJREF_NOT_ASSIGNED 10
CALL_FUNCTION_SEND_ERROR 9
SYNTAX_ERROR 9
TIME_OUT 8
TSV_TNEW_PAGE_ALLOC_FAILED 6
TYPELOAD_LOST 5
CALL_FUNCTION_OPEN_ERROR 5
IMPORT_FORMAT_ERROR 5
SYSTEM_CORE_DUMPED 4
DBIF_RSQL_INVALID_RSQL 3
LOAD_PROGRAM_LOST 3
UNCAUGHT_EXCEPTION 3
SAPSQL_CURSOR_ALREADY_OPEN 3
RAISE_EXCEPTION 2
CALL_FUNCTION_NOT_FOUND 2
CALL_FUNCTION_NO_DEST 2
DBIF_SETG_SQL_ERROR 2
RFC_ATTACH_GUI_FAILED 2
ITAB_DUPLICATE_KEY 1
SAPSQL_INVALID_TABLENAME 1
CALL_FUNCTION_ACCEPT_FAILED 1
CONNE_IMPORT_ILL_OBJECT_TYPE 1
SAPSQL_INVALID_FIELDNAME 1
TYPELOAD_NEW_VERSION 1
SYSTEM_CANCELED 1Hi Jeevi,
You can check Dump using ST22 transaction. Dump analysis is nothing but the analysis as what was the cause of dump, what went on the worng in the program which resulted in dump and such questions and getting there answers.
Reward points if useful.
Regards,
Atish -
Maximum Numebr Of Session reached error.
Hello Friends,
When we are processing to post the inbound deliveries using the RBDAPP01, the deliveries are getting posted but we also get dumps in ST22 as a CALL_FUNCTION_OPEN_ERROR.
The numbre of dumps are also very high as the file has also has around 3000 idocs to process.
When we run RBDAPP01 Program in foreground we get the pop up message as Maximun number of sessions are reached.
Not come across such kind of issue.
Any hint to tackle and avoid these dumps.
Best Regards
PrashantSee link for how to log on.
http://www.btwifi.com/help/login-with-bt/
Make sure you use your primary email address and password. If that doesn't work try using @btconnect instead of @btinternet for your email address.
Maybe you are looking for
-
Data Type Is Not Vailid for Input
Hello, I'm new in (ABAP) WebDynpro and I have a problem with displaying data - particularly with HROBJECTs from our e-Recruiting system. In my WebDynpro-Component i read some data of candidates into my context. One table (with candidate-infos) which
-
How to share USB superdrive?
I'm trying to share my Macbook air's USB superdrive with my iMac (the iMac's superdrive broke for the 3rd time in 2 years time). How can I do this? I set my Macbook air to share it's external superdrive, but it doesn't shw up on my iMac as a remote d
-
Preventing images from displaying in email messages
New to Mac. Not a month yet. In the process of getting set up on my machine somewhere back there it took a picture of me and put it in my entry in the Addressbook. Now when I send mail my address includes the picture. I don't want the picture. I've t
-
Hello Sir/Mam, Im Sanjeev Das from Bhilai(C.G.). Doing my B.E.(C.S.) and in final year from RCET, Bhilai.And has been selected by RISPL, Bhilai and Lambent, Nagpur mobiles companies. My J2ME training was completed from RISPL on June of calendar year.
-
How can I deauthorize my account without having my previous laptops?
I change my laptop a lot and now I bought a new laptop, but somehow I can't authorized my account in itunes because it said max to 5 computer. The laptop that I used previously have given to others. How can I deauthorize my account without having tho