Call of function module "SUBST_START_BATCHJOB" by RFC failed

Hello Guru's,
We have the following Issue:
In Phase PREP_INIT/JOB_RSUPDTEC we get this error from EHPI (Version 710-1)
Checks after phase PREP_INIT/JOB_RSUPDTEC were negative!
Last error code set: BATCHJOB RSUPDTEC FAILED: Calling RSUPDTEC failed - repeat phase.
In the file PSUPDTEC.LOG are the following error:
4 ETQ260 Starting batchjob "RSUPDTEC"
4 ETQ230 Starting RFC Login to: System = "E11", GwHost = "sape11", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="E11", Nr="00", GwHost="sape11", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ399 JOBNAME='RSUPDTEC', REPNAME='RSUPDTEC', VARNAME='', BATCHHOST='sape11', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ399 Returned JOBCOUNT='14230100'
2EETQ235 Call of function module "SUBST_START_BATCHJOB" by RFC failed (error-status "27")
2EETQ261 Start of batchjob "RSUPDTEC" failed
In the Sysem we can see, that the Job RSUPDTEC was created by DDIC but not started.
We can start (and finish) the job successfully as logged in DDIC.
We don't know whats the problem. The EHPI stopped every time at this point.
Need Help...
regards
Chris

Issue solved.
In /etc/hosts the first entry was SAPE11.
But it must be sape11, because the instance is sape11_E11_00.
In SM51 we could see that
sape11_E11_00 SAPE11 Dialog Batch Update Upd2 Spool Enqueue ICM active
We changed the entry and restarted SAP.
Then the job can be started.

Similar Messages

Calling a function module on another server

Dear all,
I have a function module on a test server which accesses a database table on it. I need to call that function module from a development server. Both servers are AS ABAP. I believe I need RFC, but how do I specify the test server address from the development server function call?
Thanks for your help,
Philon

You need to call the Function module as a RFC FM.
The function module needs to be set as such.
In its atributes, it needs to be Remote-enabled function module.
To call it, proceed as follows:
CALL FUNCTION <FUNCTION MODULE> ON <DESTINATION>.
<DESTINATION> needs to be a predefined RFC destination. (See transaction SM59)
CALL FUNCTION func DESTINATION dest parameter_list.
Effect
Synchronous call of a remote-enabled function module specified in func using the RFC interface. Use addition DESTINATION to specify the destination in dest. For func and dest, character-type data objects are expected. After terminating the remotely called function, the calling program is continued after CALL FUNCTION.
Note
If the content of dest is equal to the constant space, then the addition DESTINATION is ignored and a normal call CALL FUNCTION func is executed.
Leonardo De Araujo

Program making a RFC call to Function Module not working in background

Hi All,
I have an ABAP Program which is used to do a reconciliation check between the R/3 and BI system for Invoice Data. Please find below the details of the program flow:
1.     Program counts the number of records in the DSO table and aggregates the Net_Value based on the date range (passed as parameters)
2.     Program calls a Function Module (RFC Call) which counts the number of records in the R/3 table and aggregates the Net_Value for the same date range
3.     Function Module Passes back the count values and aggregated Net_Value to the program
4.     Program compares the count and aggregated Net_Value from EDWH and MSP systems and sends an email mentioning whether the counts match or not
However we are facing an issue.
Whenever, we execute the program in dialog mode, it works fine and fetches results within 5-6 minutes. However if we schedule the program to run in background (parameters through a variant), it gives no results even after running for over 3-4 hours. We tried figuring it out yesterday but could not come to any conclusion. Since there is a RFC call being to the function module, we were wondering if we need to specify some other parameter as well.
Thanks & Regards
Dharmendra

RFC Call is a procedure for executing remote enables function modules. It is done via the 'Remote Enabled' radio button on the function module's attribute screen.

Third party system call function module/BAPI through RFC to update Z table

Dear Friends,
We have a third party system which directly inserts a Z table in SAP through its programming, which is an auditing issue.
We want the third party system should call function module/BAPI through RFC so that the Z table gets updated.
waiting for inputs..
Thanks,
Kumar

if third party system is capable of making Remote Function call, then writing a Function module & making it remote enable is not difficult task in ABAP.
You may have to prepare specifications first to decide if third party system is going to Read, insert, update, delete records from Zee table.

I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(POHD) TYPE ZPOHD OPTIONAL
*"     VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*"      RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
         ls_pohdx TYPE bapimepoheaderx,
         lt_poit TYPE TABLE OF bapimepoitem,
         lt_poitx TYPE TABLE OF bapimepoitemx,
         ls_poit TYPE bapimepoitem,
         ls_poitx TYPE bapimepoitemx.
   MOVE-CORRESPONDING pohd to ls_pohd.
   MOVE-CORRESPONDING poitem to ls_poit.
   ls_pohdx-comp_code = 'x'.
   ls_pohdx-doc_type = 'x'.
   ls_pohdx-vendor = 'x'.
   ls_pohdx-purch_org = 'x'.
   ls_pohdx-pur_group = 'x'.
   ls_poit-po_item = '00010'.
   APPEND ls_poit to lt_poit.
   ls_poitx-po_item = '00010'.
   ls_poitx-po_itemx = 'x'.
   ls_poitx-material = 'x'.
   ls_poitx-plant = 'x'.
   ls_poitx-quantity = 'x'.
   APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
   EXPORTING
     POHEADER                     = ls_pohd
    POHEADERX                    = ls_pohdx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
*   PARK_COMPLETE                =
*   PARK_UNCOMPLETE              =
* IMPORTING
*   EXPPURCHASEORDER             =
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
TABLES
    RETURN                       = return
    POITEM                       = lt_poit
    POITEMX                      = lt_poitx
*   POADDRDELIVERY               =
*   POSCHEDULE                   =
*   POSCHEDULEX                  =
*   POACCOUNT                    =
*   POACCOUNTPROFITSEGMENT       =
*   POACCOUNTX                   =
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
*   POLIMITS                     =
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
*   POSRVACCESSVALUES            =
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
*   POCOMPONENTS                 =
*   POCOMPONENTSX                =
*   POSHIPPING                   =
*   POSHIPPINGX                  =
*   POSHIPPINGEXP                =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
*   INVPLANHEADER                =
*   INVPLANHEADERX               =
*   INVPLANITEM                  =
*   INVPLANITEMX                 =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

How can call a function module(RFC)in one server to another sever in my rep

How can call a function module(RFC)in one server to another sever in my report program.
What i am know whenever rfc enabled immediately radio button checks then only it will come.
please justify.

Syntax
CALL FUNCTION func DESTINATION dest [EXPORTING p1 = a1 p2 = a2 ...]
[IMPORTING p1 = a1 p2 = a2 ...]
[CHANGING p1 = a1 p2 = a2 ...]
[TABLES t1 = itab1 t2 = itab2 ...]
[EXCEPTIONS [exc1 = n1 exc2 = n2 ...]
[system_failure = ns [MESSAGE smess]]
[communication_failure = nc [MESSAGE cmess]]
[OTHERS = n_others]].
http://help.sap.com/saphelp_47x200/helpdata/en/22/042537488911d189490000e829fbbd/frameset.htm

Is it possible to call Normal function Module from WD4A , Not RFCs

Is it possible to call Normal function Module(FM) from WebDynPro for ABAP , Not RFCs

There is no difference, unless you are specifically calling the RFC to connect to another system. If so, then you need to add the DESTINATION keyword to the function call and specify the destination name. This name must be defined in SM59. But, if you are not going to another system, you can call the RFC the same way you call the regular function module.
REgards,
Rich Heilman

How to create RFC function module and how to call this function module

Hi,
i want to know step for creating RFC function module and then How to use this function module from some other sap system.
Thnaks,
jigar

Jigar,
To implement a remote function module in ABAP, perform the following steps:
Register the module as remotely callable in the RFC server system.
In the function module Administration screen (transaction code SE37), set the field Can be called via REMOTE CALL. Registering a module as remote causes an RFC stub to be generated for it.
Write the code for the function module.
Create the destinations.....................
Displaying, Maintaining and Testing Destinations
To display, create or modify destinations, choose Tools ® Administration ® Administration ® Network ® RFC destinations or enter transaction code SM59.
Remote Destinations are stored in table RFCDES. The RFCDES table describes logical destinations for remote function calls.
It is not possible to maintain the RFCDES table directly.
You can also access logical destinations via the Implementation Guide (IMG) by choosing Tools ® AcceleratedSAP ® Customizing ® Execute Project ® SAP Reference IMG.
In the Implementation Guide, expand the following hierarchy structure:
Basis
Application Link Enabling (ALE)
Sending and Receiving Systems
Systems in Network
Define Target Systems for RFC Calls
Displaying Destinations
The initial screen for this transaction displays a tree:
Different connection types (i.e. partner systems or programs) are possible. For further information, see Types of Destinations.
To display all information for a given destination, double-click it, or place the cursor on it and press F2 .
To search for a destination, press the Find button and specify your selection. You get a list of all entries matching your selection. Place the cursor on the one you want, and press F2 or simply double-click the destination. All information for the given entry appears.
Creating Destinations
On the destinations overview screen (transaction code SM59), the connection types and all existing destinations are displayed in a tree structure.
All available connection types are explained in Types of Destinations.
To create a new RFC destination, press the Create button. A new screen is displayed with empty fields for you to fill in.
If you want to create a new destination
As you create a remote destination, you can specify a particular application server or a group of servers for a balanced distribution of system load.
For details of the destination parameters, see Entering Destination Parameters.
Changing Existing Destinations
On the destinations overview screen (transaction code SM59), the connection types and all existing destinations are displayed in a tree structure.
You can display all information for a given destination by double-clicking it or pressing F2 on it.
To change an existing destination, double-click it, or place the cursor on it and press the Change button.
For details of the destination parameters, see Entering Destination Parameters.
Testing Destinations
To test a destination, choose the appropriate function from the Test menu.
Connection (also available via the Test connection pushbutton)
Authorization (checks logon data)
Local network (provides a list of application servers)
You can use the CALL FUNCTION statement to call remote functions, just as you would call local function modules. However, you must include an additional DESTINATION clause to define where the function should run:
CALL FUNCTION RemoteFunction
DESTINATION Dest
EXPORTING
f1 =...
f2 =...
IMPORTING
f3 =...
TABLES
t1 =...
EXCEPTIONS......
The field Dest can be either a literal or a variable: its value is a logical destination (for example, "hw1071_53") known to the local SAP System. Logical destinations are defined in the RFCDES table (or the TRFCD table in R/2 Systems) via transaction sm59 or the following menu path: Tools ® Administration, Administration ® Network ® RFC destinations. You can also access logical destinations via the Implementation Guide (IMG) by choosing Tools ® Customizing ® Enterprise IMG. In the Implementation Guide, you can then choose Cross-application components ® ALE ® Communication ® Define RFC destination.
The remote function call concept, for example, allows you to access a function module in an R/2 System from an ABAP program in an R/3 System. If you want to read a customer record from your R/2 Systems database, create a remotely callable function module in the R/2 environment which retrieves customer records. Call this function from your R/3 System using a remote function call and listing the destination for the target R/2 System:
Pls. reward if useful

Calling a functional module in SAP

Hi
We have a require ment like we need to update the details in SAP by calling a functional module, the data comes from a legacy which deletes immediately after it sends to XI by using a webservice, It is XI responsibility to update the details. In case SAP is down , Can we preserve this message and update SAP as and when the SAP is Up.
Please comment.
Regs
Ramesh

Hi Prasad
Thank you so much. It has good information.
As Naveen Pandrangi's blog
XI : RFCAdapter ReConnect Issue
"when the end system comes up, calls from XI would be successful. RFC Adapter would now check the connection for every message instead of only once when the communication channel is updated."
Here small question is what about the old messages that were failed due to Connection Failure or SAP down.
Please try to comment.
Thanks in advance
Ramesh

CNTL_ERROR while calling a function module from Java webdynpro

I am calling a RFC function module from javawebdynpro app
which inturn calls a function module performing BDC on CAPP transaction. When I run this from SE37 of the same system or a different system everything works fine. But when called from Java webdynpro app, it raises a CNTL_ERROR exception and creates a short dump.
Any help on this is highly appreciated

Good catch, BI Learner. This was exactly it: when assigning the values from SOURCEFIELDS directly to the import/export parameters, you have to make sure that the types are EXACTLY the same, otherwise it will not work (the routine stops with an error when calling the FM, but there is no dump).
Therefore, to solve my problem, I created the declarations precisely as expected by the FM and assigned the values to these fields:
DATA:
      SOURCEVAL TYPE /BIC/OIINVQTY,
      SOURCEUOM TYPE /BIC/OIUSUOM,
      USITM TYPE /BIC/OIUSITM,
      TARGETUOM TYPE /BIC/OIUSUOM,
      CONVERTED_COST TYPE /BIC/OIINVQTY.
DATA PRODUCTION_UOM TYPE /BIC/OIUSUOM.
" get the Production UOM
    SELECT SINGLE I~/BIC/USPRDUOM
      FROM /BIC/PUSITM AS I
      INTO PRODUCTION_UOM
      WHERE I~/BIC/USITM = SOURCE_FIELDS-/BIC/USITM AND I~OBJVERS = 'A'.
    IF ( SY-SUBRC = 4 ). " no records found
      "RAISE PARTNO_NOT_FOUND.
      RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
    ENDIF.
" load the parameters
    SOURCEVAL = SOURCE_FIELDS-/BIC/USFRZMFC.
    SOURCEUOM = SOURCE_FIELDS-BASE_UOM.
    USITM = SOURCE_FIELDS-/BIC/USITM.
" then you can call the FM
    CALL FUNCTION 'Z_CA_CONVERT_US_COST'
      EXPORTING
        PSOURCEVAL                = SOURCEVAL
        PSOURCEUOM                = SOURCEUOM
        PUSITM                    = USITM
        PTARGETUOM                = PRODUCTION_UOM
      IMPORTING
        PTARGETVAL                = CONVERTED_COST
      EXCEPTIONS
        CONVERSION_NOT_MAINTAINED = 1
        PARTNO_NOT_FOUND          = 2
        OTHERS                    = 3.
" ... [do the rest]
Thanks for your help,
Dennis

Calling a function module from within a transformation routine

I created a routine within a transformation and experience the following weird behavior now:
When I call a function module within that routine, the load fails with the following error message:
Exceptions in Substep: Rules
When I click on the button next to this text, it point me to my function module call.
What I do not understand is, that the following two scenarios work fine:
- Having the same function call (with fake values) in a plain ABAP program works beautilfully
- If I copy the content of my function module directly into my transformation routine, everything works fine as well
I am now wondering whether the routine does not "see" the function module I am calling. The module resides in a different package. Is that a problem? Do I have to include something first?
Here is the code that calls my FM (
CALL FUNCTION 'Z_CA_CONVERT_US_COST'
     EXPORTING
        PSOURCEVAL                      = SOURCE_FIELDS-/BIC/USFRZMFC
        PSOURCEUOM                      = SOURCE_FIELDS-BASE_UOM
        PUSITM                          = SOURCE_FIELDS-/BIC/USITM
        PTARGETUOM                      = PRODUCTION_UOM
     IMPORTING
        PTARGETVAL                = RESULT
     EXCEPTIONS
       CONVERSION_NOT_MAINTAINED = 1
       PARTNO_NOT_FOUND          = 2
       OTHERS                    = 3.
Thanks a lot for your help. Points will be assigned.
Dennis

Good catch, BI Learner. This was exactly it: when assigning the values from SOURCEFIELDS directly to the import/export parameters, you have to make sure that the types are EXACTLY the same, otherwise it will not work (the routine stops with an error when calling the FM, but there is no dump).
Therefore, to solve my problem, I created the declarations precisely as expected by the FM and assigned the values to these fields:
DATA:
      SOURCEVAL TYPE /BIC/OIINVQTY,
      SOURCEUOM TYPE /BIC/OIUSUOM,
      USITM TYPE /BIC/OIUSITM,
      TARGETUOM TYPE /BIC/OIUSUOM,
      CONVERTED_COST TYPE /BIC/OIINVQTY.
DATA PRODUCTION_UOM TYPE /BIC/OIUSUOM.
" get the Production UOM
    SELECT SINGLE I~/BIC/USPRDUOM
      FROM /BIC/PUSITM AS I
      INTO PRODUCTION_UOM
      WHERE I~/BIC/USITM = SOURCE_FIELDS-/BIC/USITM AND I~OBJVERS = 'A'.
    IF ( SY-SUBRC = 4 ). " no records found
      "RAISE PARTNO_NOT_FOUND.
      RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
    ENDIF.
" load the parameters
    SOURCEVAL = SOURCE_FIELDS-/BIC/USFRZMFC.
    SOURCEUOM = SOURCE_FIELDS-BASE_UOM.
    USITM = SOURCE_FIELDS-/BIC/USITM.
" then you can call the FM
    CALL FUNCTION 'Z_CA_CONVERT_US_COST'
      EXPORTING
        PSOURCEVAL                = SOURCEVAL
        PSOURCEUOM                = SOURCEUOM
        PUSITM                    = USITM
        PTARGETUOM                = PRODUCTION_UOM
      IMPORTING
        PTARGETVAL                = CONVERTED_COST
      EXCEPTIONS
        CONVERSION_NOT_MAINTAINED = 1
        PARTNO_NOT_FOUND          = 2
        OTHERS                    = 3.
" ... [do the rest]
Thanks for your help,
Dennis

How to call a function module in VC

Hi,
I want to call a function module for an addition formula which shall calculate and infer the value.
eg. quantities of 5 different characteristics (of numeric data) is to be summed up and inferred against the 6th characteristic.
I want to know the detailed process to create a Variant Function and use it in a dependency.
Request to please advise the steps, type of dependency and its code.
Regards,
Rajesh Mohapatra

Dear Rajesh,
I also wanted to learn how to do that, your post motivated me to use a bit of freetime and investigate on the subject. I finally made my function work, so here are the tips.
The example is very simple, just a variant function with two inputs and which multiplies inside the input values and transfer that result to the output ( 3 x 4 => 12 ).
Deducting how to add five values or any other logic would be easier starting from there.
STEP 1: Create Variant Class for the product. I imagine you already have that. In my case its name is ZVC_CLASS, you have already a material assigned to the class, a configuration profile, etc....
STEP 2: Create Three Characteristics Z_NUM_CH_1,Z_NUM_CH_2,Z_NUM_CH_3 the three of numeric type
STEP 3: Assign characteristics from step 2 into class ZVC_CLASS
STEP 4: Create the function module with the code given below. I put the name ZVC_FUN_TEST
FUNCTION ZVC_FUN_TEST.
""Interfase local
*" IMPORTING
*"     REFERENCE(GLOBALS) TYPE CUOV_00
*" TABLES
*"      QUERY STRUCTURE CUOV_01
*"      MATCH STRUCTURE CUOV_01
*" EXCEPTIONS
*"      FAIL
*"      INTERNAL_ERROR
*- Inicializar los valores.
DATA:
GV_VALOR_FINAL        TYPE CUOV_01-ATFLV,
GV_VALOR_NUM1         TYPE CUOV_01-ATFLV,
GV_VALOR_NUM2         TYPE CUOV_01-ATFLV.
CLEAR:
    gv_valor_final,
    gv_valor_num1,
    gv_valor_num2.
CALL FUNCTION 'CUOV_GET_FUNCTION_ARGUMENT'
    EXPORTING
      ARGUMENT            = 'Z_NUM_CH_1'
    IMPORTING
     VTYPE               = P_VTYPE1
     SYM_VAL             = P_VALOR_SYM1
      NUM_VAL             = gv_valor_num1
IO_FLAG             =
    TABLES
      QUERY               = QUERY
    EXCEPTIONS
      ARG_NOT_FOUND       = 01.
IF SY-SUBRC <> 0.
    RAISE INTERNAL_ERROR.
ENDIF.
CALL FUNCTION 'CUOV_GET_FUNCTION_ARGUMENT'
    EXPORTING
      ARGUMENT            = 'Z_NUM_CH_2'
    IMPORTING
     VTYPE               = P_VTYPE1
     SYM_VAL             = P_VALOR_SYM1
      NUM_VAL             = gv_valor_num2
IO_FLAG             =
    TABLES
      QUERY               = QUERY
    EXCEPTIONS
      ARG_NOT_FOUND       = 01.
IF SY-SUBRC <> 0.
    RAISE INTERNAL_ERROR.
ENDIF.
*- Calculate final value
gv_valor_final = gv_valor_num1 * gv_valor_num2.          "Especifico de c/u.
DATA: VTYPE TYPE CUOV_01-ATFOR.
VTYPE = 'NUM'.
CALL FUNCTION 'CUOV_SET_FUNCTION_ARGUMENT'
    EXPORTING
      ARGUMENT                = 'Z_NUM_CH_3'
      VTYPE                   = VTYPE
      NUM_VAL                 = gv_valor_final
    TABLES
      MATCH                   = MATCH
    EXCEPTIONS
      EXISTING_VALUE_REPLACED = 01.
IF SY-SUBRC <> 0.
    RAISE INTERNAL_ERROR.
ENDIF.
ENDFUNCTION.
STEP 5: Activate the function module for Variant Configuration in transaction CU65, put there your function module, release int and in button characteristics write Z_NUM_CH_1,Z_NUM_CH_2,Z_NUM_CH_3. Flag the first two lines as they are inputs.
STEP 6: Create a Dependency ZVC_PROC_TEST of type Procedure to call the function with this code:
000010 Function ZVC_FUN_TEST
000020 (Z_NUM_CH_1 = $root.Z_NUM_CH_1,
000030 Z_NUM_CH_2 = $root.Z_NUM_CH_2,
000040 Z_NUM_CH_3 = $self.Z_NUM_CH_3)
STEP 7: Lets say I want to calculate the multiplication only upon the selection of another characteristic "Calculate" YES/NO. For this I create a characteristic in CT04 Z_CALCULATE type CHAR 1 with possible values Y or N. For the value Y y add the procedure ZVC_PROC_TEST so that formula only activates on Y.
STEP 8: Add characteristic Z_CALCULATE to class ZVC_CLASS
STEP 9: VA01, it should work

Call a function module from CRM 5.0 via ITS to FICA

Hi
I want to call a function module in FICA (FICA is using sapgui) from CRM (IC-web) via ITS (Not integrated in FICA)
Is it possible and how should this be done???
If someone know how, please help
BR//JL

generally RFCs should not have user dialogs.
any how to handle your case, you need ITS and since FICA is a WAS 6.20 system, you need to have a ITS installed for FICA system, without which you cannot do that.
alternatively you can mimic the functionality of the RFC by programming the same in a BSP and call this from CRM system
Regards
Raja

System failure during call of function module RSWR_RFC_SERVICE_TEST in BW

Hello All,
            I am doing configuration with BW and EP portal when we run the program (RSPOR_SETUP) in step - 12 Maintain User Assignment in Portal = (System failure during call of function module RSWR_RFC_SERVICE_TEST) giving this error SSO is working fine.
RFC connection is working fine with BW and portal
When i execute the FM - RSWR_RFC_SERVICE_TEST it is giving error (SYSTEM_FAILURE) and in Portal side log file it is giving below error.
dev_jrfc.trc
Exception thrown [Fri Sep 05 15:14:57,928]:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_RFC_SERVICE_TEST not found on host (Hostname), ProgId=EPP_PORTAL_SID: Object not found in lookup of RSWR_RFC_SERVICE_TEST.
        at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:138)
        at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:269)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Please help me find the solution.
Thanks
Gurpal

Hi Gurpal,
Please go through the below SAP notes
878455
- Information broadcasting: No portal user exists
814083
- Inf. broadcasting: Changed RFC settings as of NW 04 SP11
1135947 - Bean not found
Hope this solves your problem.
Regards,
Prithviraj.

Call a function module inside of another function module

Has anyone ever called a function module inside of a remote enabled function module? Maybe this needs to be accomplished inside of an include. Just wondering.
Thanks!

Hi
No u can't do it because the RE_LAST_DAY_OF_MONTH is not remote function module.
If you need to call it u should insert it in a RFC, so u should create in R/3 a new RFC calling both fms: RE_LAST_DAY_OF_MONTH and the remote one.
And so call this new rfc instead of the other one.
Max

Call of function module "SUBST_START_BATCHJOB" by RFC failed

Similar Messages

Maybe you are looking for