Call the subscreen from a function group

hi experts.
i have created a module program in which i need to call a subscreen. the sub screen is created in a function group .
how can i call it.
thanks
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 7, 2008 11:45 AM

deepu K,
I always have the same problem in such cases.
Your hints concerning se38 and deleting with /h are very helpful but
it is diffucult to locate the right location of this problem. I have followed
your instructions and I get this:
PROCESS AFTER INPUT.
CHAIN.
    MODULE EXIT.
    FIELD: RS38M-FUNC_EDIT,
           RS38M-FUNC_HEAD,
           RS38M-FUNC_DOCU,
           RS38M-FUNC_TEXT,
           RS38M-FUNC_SSET.
      MODULE SET_XCODE_SE38.
    FIELD RS38M-PROGRAMM:
      MODULE PROGRAMM.
    MODULE FUNCTION_MENU.
ENDCHAIN.
MODULE MNGR_PAI.
Is generally any way to find out very quickly the affected loacation
in such cases ?
Regards
sas

Similar Messages

How to access the screen from one function group to other function group

Hi Experts,
How to access the the screen from one function group to other function group.
Please help me on this , Bcoz it is client requirement i need to finish this urgently.
Please
Thanks
Basu

HI ,
You can do a call transaction or submit and return
Regards,
Sooness.

I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(POHD) TYPE ZPOHD OPTIONAL
*"     VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*"      RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
         ls_pohdx TYPE bapimepoheaderx,
         lt_poit TYPE TABLE OF bapimepoitem,
         lt_poitx TYPE TABLE OF bapimepoitemx,
         ls_poit TYPE bapimepoitem,
         ls_poitx TYPE bapimepoitemx.
   MOVE-CORRESPONDING pohd to ls_pohd.
   MOVE-CORRESPONDING poitem to ls_poit.
   ls_pohdx-comp_code = 'x'.
   ls_pohdx-doc_type = 'x'.
   ls_pohdx-vendor = 'x'.
   ls_pohdx-purch_org = 'x'.
   ls_pohdx-pur_group = 'x'.
   ls_poit-po_item = '00010'.
   APPEND ls_poit to lt_poit.
   ls_poitx-po_item = '00010'.
   ls_poitx-po_itemx = 'x'.
   ls_poitx-material = 'x'.
   ls_poitx-plant = 'x'.
   ls_poitx-quantity = 'x'.
   APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
   EXPORTING
     POHEADER                     = ls_pohd
    POHEADERX                    = ls_pohdx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
*   PARK_COMPLETE                =
*   PARK_UNCOMPLETE              =
* IMPORTING
*   EXPPURCHASEORDER             =
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
TABLES
    RETURN                       = return
    POITEM                       = lt_poit
    POITEMX                      = lt_poitx
*   POADDRDELIVERY               =
*   POSCHEDULE                   =
*   POSCHEDULEX                  =
*   POACCOUNT                    =
*   POACCOUNTPROFITSEGMENT       =
*   POACCOUNTX                   =
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
*   POLIMITS                     =
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
*   POSRVACCESSVALUES            =
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
*   POCOMPONENTS                 =
*   POCOMPONENTSX                =
*   POSHIPPING                   =
*   POSHIPPINGX                  =
*   POSHIPPINGEXP                =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
*   INVPLANHEADER                =
*   INVPLANHEADERX               =
*   INVPLANITEM                  =
*   INVPLANITEMX                 =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Calling java APIs from a function module

Hi,
Can someone tell me whether it is possible to call Java APIs from a function module in SAP system?
Thanks in advance,
Vineetha

Hi,
I guess you have changed the properties of screen only.
I assume you have made a Ztransaction Code.
When you define a transaction code, you need to specify a screen number for radio option program and screen and you need to specify a screen and not subscreen.( I think so!!)
You changed only the code without changing the transaction code properties.
Therefore, i think u r getting a dump.
If you want to call your subscreen, call it in some screen and then call that screen using your transaction code properties.
To include a subscreen screen in the subscreen area of the main screen and call its PBO flow logic, use the following statement in the PBO event of the main screen:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN <area> INCLUDING <prog> <dynp>.
To call the PAI flow logic of the subscreen screen, use the following statement in the PAI flow logic of the main screen:
PROCESS AFTER INPUT.
CALL SUBSCREEN <area>.
Refer:
http://help.sap.com/saphelp_webas630/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Regards,
Tanveer.
Please mark helpful answers.
Message was edited by: Tanveer Shaikh
Message was edited by: Tanveer Shaikh

How to call the RFC from R/3 to SRM, when we use webdynpro abap? (Urgent)

Hello
We use SRM Server 5.5 with classic scenario.
We want to call RFC in R/3 from webdynpro ABAP.
How can we do that?
We are developing the web report using webdynpro abap.
So we need some of R/3 data such like PR(EBAN)and PO(EKKO,EKPO).
When user choose the search parameter, report diplay the Shopping cart, PR and PO data on webdynpro. So we call the R/3 RFC to display the PR, PO data.
But I tired to call the RFC in R/3, We could not call it.
How to call the RFC from R/3 to SRM, when we use webdynpro abap?
Thank you,
Best Regards,
SH.

Hi
Please look at the following threads as well ->
WebDynpro in SRM
BAPI's /RFC's in SRM
BAPI to Change Shopping Cart by RFC
SRM60 and webdynpro
Webdynpro Services Exception
WebDynpro using BAPI has an error
SRM60 and webdynpro...
SAP uses META Function modules in SRM to get data from R/3 back-end.
For getting Purchase requistion data, use the function modules ->
META_REQUISITION_CHANGE Change purchase requisition
META_REQUISITION_CREATE Create Requisition
META_REQUISITION_DELETE Delete/close purchase requisition
META_REQUISITION_GETDETAIL Display requisition details
META_REQUISITION_GETITEMS Display requisition items
META_REQUISITION_GETRELINFO Get Releasease Info for requisitions
For getting Purchase order data, use the function modules ->
META_PO_CREATE Create purchase order
META_PO_DELETE Delete reservation
META_PO_GETDETAIL Display purchase order details
META_PO_GETITEMS Display purchase order items
META_PO_GETRELINFO Display purchase order release information
Hope this will definitely help. Do let me know.
Regards
- Atul

Call .xhtml file from javascript function

Hi,
Is there a way to call .xhtml page from javascript function???

BalusC wrote:
Yes there are some ways. But this question has nothing to do with JSF and certainly not with Java at all. Javascript is an entirely different language, although it has a similar syntax as Java (and unforunately also a similar name, they should never have renamed it from ECMAScript).I think ECMAScript is a renaming from JavaScript. The originally JavaScript was called LiveScript by Netscape. I've heard that the ECMAScript name was deliberately chosen to be unsexy.

Call the BAPI from the program..

Hey guys,
can we call the BAPI from the program..
if yes how can we can show sales orders being loaded..
thanks its urgent

Nishant,
yes easily you can call bapi from program.
for getting all sales order use:
BAPI_SALESORDER_GETLIST
also am providing a program so that you can see how bapi has to call in program.
CALL FUNCTION 'BAPI_SALESORDER_GETLIST'
             EXPORTING
                  customer_number    = lf_customernumber
                  sales_organization = if_sales_organization
                  document_date      = lf_document_date_from
                  document_date_to   = lf_document_date_to
*              PURCHASE_ORDER     = IF_PURCH_ORDER
                  material           = lf_matno
             IMPORTING
                  return             = ls_return
             TABLES
                  sales_orders       = sales_orders.
Am afraid to say you that above solution you get about bapi it is not for showing the list of SO these are for creating SO.
Edited by: Amit Gujargoud on Jul 3, 2008 3:12 PM

Calling the subscreen into main screen

Hi Guru's,
 I am having a main screen, which holds 2 radio buttons.
 If I select one radio button it has to call one table control, if I select 2nd radio button it has to call different table control.
 For this I have created two subscreens, each one holds a table control.
based on the selection of radio button I have to call these subscreens in to the main screen.
 Please help me how to call the subscreen into main screen.

There is no help text for this dump
Either the text was inadvertently deleted or the release of
the kernel differs from the release of the database
Refer to the Note system for further information on this dump.
000160 %_archive TYPE arc_params,
000170 END OF COMMON PART.
000180 *
000190 FIELD-SYMBOLS: <%_1> %_PREDEFINED.
000200
000210 DATA: %_repid TYPE syst-repid %_PREDEFINED,
000220 %_viaselscr TYPE x VALUE '04' %_PREDEFINED.
000230
000240 SYSTEM-EXIT.
000250 PERFORM (sy-xform) IN PROGRAM (sy-xprog).
000260
000270 * Nach Laden des Dynpros
000280 MODULE %_ctl_init OUTPUT.
000290 %_repid = sy-repid.
000300 PERFORM %_ctl_init IN PROGRAM sapmssyd USING %_repid IF FOUND.
 > ENDMODULE.
000320
000330 * Um DCO
000340 MODULE %_ctl_output OUTPUT.
000350 %_repid = sy-repid.
000360 PERFORM %_ctl_output IN PROGRAM sapmssyd USING %_repid IF FOUND.
000370 ENDMODULE.
000380
000390 * Um DCI
000400 MODULE %_ctl_input INPUT.
000410 %_repid = sy-repid.
000420 PERFORM %_ctl_input IN PROGRAM sapmssyd USING %_repid IF FOUND.
000430 ENDMODULE.
000440
000450 * Erstes Modul in PAI
000460 MODULE %_ctl_pai INPUT.
000470 %_repid = sy-repid.
000480 PERFORM %_ctl_pai IN PROGRAM sapmssyd USING %_repid IF FOUND.
000490 ENDMODULE.

Premium subscription - calling the US from Interna...

Can I use Skype to call the US from Bahrain with the premium subscription?

No. You can't call to any landline or cellphone with Skype Premium.
The product is for Skype-to-Skype video Group calling.
http://www.skype.com/intl/en/prices/premium/
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

TS3367 I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling m

I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling mine.

Each device needs a separate address. Use an email address (gmail.com) on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

How to transfer the tables from one file group to another file group in SQL 2008.?

Hello all,
I have few issues regarding the transfer of the tables from one file group to another file group  in SQL 2008 and also How can we  backup
and restore the particular database based on file group level.
Let’s say I have a tables stored within the different FG. such as
Tables
  File group
Dimension tables
Primary
Fact tables
  FG1
FG2…
zzz_tables
  DEFAULT_FG
dim.table1                                                                                                                          DEFAULT_FG
dim.table2                                                                                                                          DEFAULT_FG
Here all I want to transfer the dim.table1 ,dim.table2  from  DEFAULT_FG to the Primary File
group .So is there simple methods for transfer the dim.table1,2  from one FG to another .I have tried somewhat but I couldn’t get the exact way .So if someone have better idea please share your knowledge that would be really appreciated.
Secondly after moving those dim.table1 ,dim.table2 from DEFAULT_FG to Primary ,All I want to backup and restore the database only containing  the Primary and FG1,FG2… not
a DEFAULT_FG.Is it possible or not.?
Hope to hear from the one who knows better approach for this kind of task .Your simple help will be much appreciated.
Regards,
Anil Maharjan

Well after all my full day research on this topic had paid off, I finally got the solution and am so happy to research on these things. It makes
us feel really happy after all our research and hard work doesn't goes as waste.
Finally I got what I am looking for and want to make sure that I am able to transfer the tables from DEFAULT_FG to another FG without tables
having clustered index on that tables .
With the help of the link below I finally got my solution where Roberto’s coded store procedure simply works for this.
Really thanks to him for his great post and thanks to all for your response and your valuable time.
http://gallery.technet.microsoft.com/scriptcenter/c1da9334-2885-468c-a374-775da60f256f
Regards,
Anil Maharjan

I have a mac mini with a web cam/microphone and would like to be able to facetime with my families iPhones 4S/5 using wi-fi email address. I can't call the iPhones from the Mac Mini with Mountain Lion OS. What is wrong?

I am trying to include a Mac Mini with a webcam/microphone to call several family iPhones 4S/5 usisng email addresses vice phone numbers so that we can communicate from outside the US via iPhone to the US (Mac Mini) via wi-fi and email addresses. We are using the same email address for the Mac Mini as for Itunes and made new email addresses for each of the iPhones. I cannot receive calls from the iPhones but can call the iPhones from the Mac Mini. what needs to be corrected?
Thanks.
Steve

Hi Steve,
Thanks for visiting Apple Support Communities.
You may find some useful suggestions in these articles:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Have a great day!
Jeremy

Getting the error while calling the report from oaf page

Dear all
when i am calling the report from oaf page
if (pageContext.getParameter("PrintPDF") != null)
DataObject sessionDictionary =
(DataObject)pageContext.getNamedDataObject("_SessionParameters");
HttpServletResponse response =
(HttpServletResponse)sessionDictionary.selectValue("HttpServletResponse");
try
ServletOutputStream os = response.getOutputStream();
// Set the Output Report File Name and Content Type
String contentDisposition = "attachment;filename=EmpReport.pdf";
response.setHeader("Content-Disposition", contentDisposition);
response.setContentType("application/pdf");
// Get the Data XML File as the XMLNode
XMLNode xmlNode = (XMLNode)am.invokeMethod("getEmpDataXML");
ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
xmlNode.print(outputStream);
ByteArrayInputStream inputStream =
new ByteArrayInputStream(outputStream.toByteArray());
ByteArrayOutputStream pdfFile = new ByteArrayOutputStream();
//Generate the PDF Report.
TemplateHelper.processTemplate(((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getAppsContext(),
"XXCRM", "XXCRM_EMP",
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getLanguage(),
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getCountry(),
inputStream,
TemplateHelper.OUTPUT_TYPE_PDF, null,
pdfFile);
// Write the PDF Report to the HttpServletResponse object and flush.
byte[] b = pdfFile.toByteArray();
response.setContentLength(b.length);
os.write(b, 0, b.length);
os.flush();
os.close();
} catch (Exception e)
response.setContentType("text/html");
throw new OAException(e.getMessage(), OAException.ERROR);
pageContext.setDocumentRendered(false);
i am getting the error java.classcastexception at this line
DataObject sessionDictionary =
(DataObject)pageContext.getNamedDataObject("_SessionParameters");
regards
Sreekanth

check if you have import oracle.cabo.ui.data.DataObject; in your import statement.
--Prasanna

THE DETACH FROM TEMPLATE FUNCTION IN DREAMWEAVER CC DOES NOT SEEM TO BE FUNCTIONAL Can you please explain.

The detach from template function in Dreamweaver CC does not seem to be functional
Can some explain.
Bruce K.

Hi Lalita
Yes you are correct, I TRY THE Modify -> Templates -> Detach from Template. I have built over 50 websites with this method using Modify -> Templates -> Detach from Template in DW CS5.5
After a save a page to a template for future ref.
I create a new page using this temp. but can not use the Modify -> Templates -> Detach from Template. The Detach from Template is not functional. It is there but when I mouse over its not operative.
Does DW CC need update maybe.
Thanks
Bruce

Call the RDF from Froms but generate in PDF format

Hai all,
i can call the RDF from Froms but my requirement is after calling the RDF i want to generate it into PDF.
Thanks in Adv

You should have posted in appropriate forum. Perhaps, more people there to help you out:
Forms (Forms)
Sidhu
http://amardeepsidhu.blogspot.com

Call the subscreen from a function group

Similar Messages

Maybe you are looking for