Call Transaction (BAPI) in ABAP Web Dynpro

I'm developing a ABAP WD application which make use of a RFC BAPI. The BAPI will then use call transaction to perform certain operation on R3.
<b>CALL TRANSACTION 'IQS12' USING bdcdata MODE 'P'
MESSAGES INTO itab.</b>
It works fine when I tested it using TCode SE37. When the call transaction fails all error message is trapped inside the internal table.
However when I run it using ABAP WD, it does not return the internal table but an error page on the portal. The error message was displayed on the portal page. I would like to handle the error message by my own. Is there any way doing this?
Appreciate if anyone can sort this out for me. Thanks in advance.
Ricky

Hi,
It's okie now. I have found out that this is a known issue and there's a SAP notes (935725) for that.
According to the notes, call transaction with message type E will fail if the BAPI is executed through http.
Thanks for replying. Appreciate that.
Ricky

Similar Messages

Calling Adobe form via ABAP Web Dynpro

Hi
Ive followed the below WIKI and have encountered an issue and finding it rather frustrating to resolve
http://wiki.sdn.sap.com/wiki/display/WDABAP/CallAdobeFormthroughABAPWebDynpro
Im fairly new to this to pls excuse my ignorance
The message Im getting when I check for errors in my MAIN view is
""A label must refer to element "DISPLAY_NO".""
The procedure tells me the follow
a) Create a label and bind its 'Label for' property to the UI element.
b) Select the label's 'Text' property, bind it to an appropriate context attribute or, alternatively, set the quick info (or accessibility description - if one exists) for the UI element.
c) Either set the visibility of the label to "visible" or set the element that the label refers to as invisible.
Im just not sure where to correct this under my DISPLAY_NO element
Im not sure if thisis the reason why im getting the UNCAUGHT_ EXEPTION - CX_WD_GENERAL runtime error as well
Telling me my object Z************* does not exist
Regards
Justy

Hi...
in your view for element DISPLAY_NO, There is no label. So create one label and
in corresponding label properties bind its 'Label for' property to the display_no ui element.
And did you activate your component ? if above is the error, you will not able to activate the component. So first check and activate component. if you get any error related to DISPLAY_No, then follow the above procedure.
if you have any doubts, post the same back
Regards
Srinivas

How Can I convert or include a Transaction to ABAP web dynpro

Hey,
Im new to web dynpro, and I have followed sap web dynpro tutorials step by step but I couldnt find a way to create an interface the same way I create screens. Can anyone tell me how do I design an interface in web dynpro or is there a way to convert my transaction to an ABAP web dynpro application?
Thanks.

No there is no way to convert your gui based screens to web dynpro, you have to design them in web dynpro. And the design of WD is not like normal screen painter(SE51).
What I would suggest you is first go thru some basic tutorials, then you will get the idea of UI elements which are used in WD.
Have a look on this link
https://www.sdn.sap.com/irj/scn/wiki?path=/display/wdabap/learning+map

RFC/BAPI Call (ABAP Web Dynpro)- DYNPRO_SEND_IN_BACKGROUND

Hi all,
I'm developing an ABAP Web Dynpro application which utilise a RFC enabled function module. When I tried to execute the function module through the browser it terminated with an abap dump. I checked ST22 and found the following dump: 'DYNPRO_SEND_IN_BACKGROUND'. However when I tried executing it using SE37, the function module works fine.
Any ideas?
Ricky

Hello Ricky,
to my guts feeling that should be fine, but I have never used call dialog in such a scenario. If I were in your shoes I would try to break down the problem:
- Is it of general nature?
- Is it specific to this dialog?
To distinquish that I would write the most basic dialog and use it the same way as the target one. If this fails too, using FuBa´s with call dialog seems to be not possible => try to avoid that situation. If the test succeeds, well the hunt for the needle in the haystack is open.
Good Luck
Klaus

Call a ABAP Web-Dynpro-application via a BSP-Application

We have a BSP-Framework, that call several applications among other things other BSP-Applications, ITS-Application and other systems. Now I want to integrate a ABAP Web Dynpro-Application.
For the moment I can call the ABAP Web Dynpro-Application from our application.
This application runs in the same session as the Framework (verify in transaction sm04).
When I want to call another application in the Framework, the session will be killed (no more sessions in sm04). This happens also, when I want to call the ABAP Web Dynpro-Application a second time.
I guess, that the ABAP-Framework thinks I want to go outside the system (for example www.google.de) and close the session. I found out, that this wouldn't happen, if the application were suspended. But I found no way to tell the application via a url-parameter to suspend.
Can someone help me?

Thx for the tip,
but I can't firea suspend plug. Because I'm in BSP. I understand the docu so, that you have the option to call a other apllication like BSP from a ABAP Web Dynpro.
I want to call the ABAP Web Dynpro form BSP like this way.
1. Start BSP-Framework
2. Call ABAP Web-Dynpro-Application from BSP
3. Call another Application from BSP without automatically logout by unload ABAP Web Dynpro. (I have a chance to call the ABAP Web Dynpro again via url to suspend before I call the other app.)
Regards Stefanie

Call back-end report from Web Dynpro for ABAP

Hi Experts,
I have an web dynpro for abap application, I put it into an iView. I also have a report which have selection screen and ALV display in back-end. Now I would like to call the report from the web dynpro application and display it in the web.
What steps need to be done to do it?
Thanks,
Anthony

Anthony,
you can create a custom transaction for your report "for example ZREPORT" and then create an IVIEW for ZREPORT.
in your webdynpro you can create a button or link and in the action behind you can call OBN and pass the IVIEW parameters for the OBN call.
OBN can be found in the webdynpro wizard tool.
thanks!
Jason PV

Calling an interface METHOD of another abap web dynpro application

Hi Experts,
Can u plz tell how we can Call an interface METHOD of another abap web dynpro application in main WD Component.
Thanks
Mahesh

Hi ,,
   Example ALV interface method calling   GET_MODEL interface method
   View attribute   declaration   :    M_WD_ALV type      IWCI_SALV_WD_TABLE
     DATA lo_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
      wd_this->M_WD_ALV =   wd_this->wd_cpifc_alv( ).   "ALV is the usage name
     DATA lv_value TYPE ref to cl_salv_wd_config_table.
      lv_value = wd_this->M_WD_ALV->get_model( ).   " interface method calling in ALV component usage.....
Regards,
Devi

Activating ABAP Web Dynpro's in transaction SICF

I need access to activate ABAP Web Dynpro's in transaction SICF but don't want access to anything else. It seems that I need to use authorisation object 'S_ICF_ADM' but I can't get this working. Can anyone guide me as to the values I need in there ?
thanks,
Malcolm.

Hi Malcolm,
Try to activate the services using this link:
[Active services in SICF|http://help.sap.com/saphelp_nw70/helpdata/en/46/d28dfa34bb12bee10000000a1553f7/frameset.htm]
I hope it helps.
Regards
Arjun

Consume WebService in ABAP Web Dynpro

Hi, Is there any How To or step by step document which shows to consume web service in ABAP Web Dynpro.
I've searched a lot but could not find any.
Please provide me some pointer/examples.
Thanks,
CD

Hi Thomas,
I am facing a problem in consuming web service in webdynpro.
I created a web service for standard FM BAPI_BUS1240_CREATE (it is available in SAP ECC server).
I want to consume this web service in another system (SAP Portal system, where users will be providing input; this FM is not available here).
I created a Proxy class in SAP Portal system through the WSDL document of the Web service.
I configured logical port for the same in TCode: SOAMANAGER and successfully tested the Client proxy (through TCode: SE80). As a result, the record is created in SAP ECC server.
Now, I am unable to do the same through Webdynpro. Please find the attached Proxy class screen-shot. It has 6 methods of which BUS1240_CREATE contains the relevant parameters of the actual BAPI FM.
I filled up the same parameters that I used in Testing the Client proxy but unable to create record in SAP ECC system. My code (On_submit of a button) looks like below,
TRY.
      CREATE OBJECT wd_assist
        EXPORTING
          logical_port_name = 'ZXXXXXXX'.          "Logical port configured through SOAMANGER
        CATCH cx_ai_system_fault.
ENDTRY.
      CALL METHOD wd_assist->bus1240create                  "Method filled with input parameters given by user
        EXPORTING
          input = ls_inp
        IMPORTING
          output = ls_outp.
After execution of method BUS1240_CREATE, system throws the error as below,
The following error text was processed in the system DEP : Error (id=SoapFaultCode:5 ): Web service processing error; more details in the web service error log on provider side (UTC timestamp 20141011062545; Transaction ID 5B0F51E4AD4EF13EA6B9E41F137BE3CC)
Please tell me where I went wrong. Do I need to call methods of the Proxy class? Also suggest if any configuration change involved in this.
Have a nice day, thanks.

How to call legacy system screen in web dynpro for java?

Now I'm using Netweaver CE for building BPM (Business Process Management).
In BPM system, I wana call legacy system screen(ERP, C/S , Web, etc..) in web dynpro.
I'v already known how to call legacy system method and data.( using RMI, SOAP and RFC )
But I don't konw how to call legacy system screen.
If there is no way calling legacy system screen, I will have to build every screen using web dynpro.
It's so terrible.
So I think there is a way calling legacy system screen.
It's just my opinion.
If It can call legacy system screen in web dynpro, please let me know how to call it.
Or, If there is no way calling legacy system, how solve I this problem?
Thank you reading my question.

I assume that with "legacy system screen" you mean ABAP Dynp sceens. Of cause it would be attractive to integrate into new BPM processes. However there is a conceptional issue: You could easily integrate them e.g. into a WebDypro using a URL to to the so-called WebGUI (the ITS that makes Dynp screens Web enabled).
However the Dynp screen store all there state in the ABAP backend. This information is not available to to the process engine, e.g. to set the Task to completed or to use the data in Output Mapping.
In fact you need a way to wrap the how UI transaction into a WebDynpro screen including data flow.

Incorporating web service in an ABAP web dynpro view

Hi,
I am trying to call an external web service to have its results displayed in an ABAP web dynpro view. I've seen various threads that are dealing with the same issue, but none of them seemed to have helped me (I am quite new at this so maybe I'm just having a slow beginning, please bear with me)
I'm interested in extracting information from a simple web service online. To this end, I went on www.xmethods.net and found a "quote of the day" service, which is practical because it doesn't even need input.
I am writing down all the steps I've taken, even if they seem trivial, because maybe my problem is the result of a silly mistake I'm not yet capable of noticing...
I am mostly following the instruction from here:
<a href="/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap:///people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
The SAP I use is the one on the SC7 system, seems to be ECC 6.0
After I created my package, I go on to create a Proxy Object, and when prompted for a WSDL source, I give the URL destination I got from xmethods.net: <a href="http://www.swanandmokashi.com/HomePage/WebServices/QuoteOfTheDay.asmx?WSDL">http://www.swanandmokashi.com/HomePage/WebServices/QuoteOfTheDay.asmx?WSDL</a>
Doing this I get an HTTP error (return code 400, message "ICM_HTTP_CONNECTION_FAILED") (others have had this problem, e.g. Calling Web Services from ABAP, but the answers offered haven't been much help to me)
and having no idea what to change or not change in SICF and other settings, I decided to save the file locally, and so I then created a Proxy Object by choosing the WSDL source as the local file I saved.
Telling me that multiple port types exist (SOAP, httpGet and httpPost) I picked SOAP. I can then see the properties of my Client Proxy Object, its structure with the classes and methods etc.
Then, following Thomas Jung's procedure, I went to create a logial port which I named QUOTE_PORT. When I do the F8 test he suggests to do, I get an error: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED") which was predictable since I still haven't resolved that same problem above.
I then proceed to create a Web Dynpro Component. In that component, in the component controller's context, I created a simple node into which I added attributes which I created using the wizard -> Attributes from components of structure, and there I picked the structures that had just been created in my proxy object, each in its own node
I have three proxy structures generated: GET_QUOTE_SOAP_IN, GET_QUOTE_SOAP_OUT and QUOTES. This last one has two attributes which are STRINGs, the quote of the day and its author.
I then create a rather trivial view, whose context I have mapped to the component controller's context so as to have access to those "quote" and "author" attributes I just mentioned. The layout is simplistic at best, containing only two textviews, each one bound to its respective attribute.
Once the application has been done and tested, the output is a blank page. I'm hoping that this is only because of that ICM_HTTP_CONNECTION_FAILED error. Has anyone else had these problems when calling external web services? Is this the right procedure for displaying output?
Thanks and Regards,
Micol

Hi, sorry for the long reply time.
from work I do have proxy settings:
automatic configuration script: http://proxy:8083
proxy server for LAN: proxy / 8080
from home it's a proxy free connection.
In both cases I tried changing the settings in the SICF transaction, but it hasn't changed much.
With the HTTP error that I get, I get a long text on how to maybe solve it,
<b>No connection to Integration Builder (only generic data visible)
Message no. SPRX081</b>
In this long text, I have four tests to do in order to check the connection (as far as I can understand)
1. The address of the Integration Builder must be stored in the SAP system
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
2. The HTTP connection of the ERP application server must function correctly
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION
3. The Integration Builder server must be running correctly
=>Check with report SPROX_CHECK_IFR_RESPONSE
4. Proxy generation must interpret the data of the Integration Builder correctly
==>Check with report SPROX_CHECK_IFR_CONNECTION
The checks for 1&2 work okay, but I get errors for checks 3&4
"Integration Builder data not understood"
How can I go on from here?
Thx

Is abap web dynpro is a netweaver product?

Dear experts,
is abap web dynro is a netweaver product? ..i wonder why is it categorized under application server in sdn forums can anyone explian..
in addition to abap i am willing to learn abap web dynpro.how would be the prospectes of abap web dynpro in the us market ...or do u suggest any other hot topic to learn?..please feel free to comment on my idea and kindly suggest me a better option if my idea is not ideal....
i am not into java till now so i am not willing to learn java web dynpro..
please suggest a better option so that i can use my abap skills to the fullest..
thanks in advance.

Hi Ramu,
Yes, ABAP Web dynpro is a Netweaver product. It cums with mySAP suite.
This is the hot technology in the market and if you are not a JAVA guy then you must go with ABAP Web dynpro.
Basically with the help of ABAP Web dynpro we develope custom products for the client. this is UI based technology and one of best option for "ABAPers" .
For Web dynpro ABAP you will require SAP ECC 6.0 onwards and WAS 7.0
is a must. It has very good future propspects as this is best UI technology.
In web dynpro ABAP we follow MVC(Model View Controller) architecture.
In this object oriented ABAP is used to provide background functionality. Here, your ABAP skills can be utilized to the fullest. Programming in web dynpro ABAP is different than conventional ABAP programming. Here we strictly follow MVC architecture in terms of controller interface. Also there are many wizards available so that we can directly pick the code from wizards.
e.g We can call BAPI through a service call in web dynpro application. Thus automatically backgroud code for BAPI execution will be generated.
To start with Web dynpro ABAP you can try following tutorial:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
You can start with tutorials and all. There are around six tutorials in SDN library.
Web Dynpro for ABAP
http://help.sap.com/saphelp_erp2005/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/frameset.htm
best tutorials in wbdynpro for ABAP to start with :
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
Have a look at the following SDN WDA Wiki . There you can find all relevant information.
https://wiki.sdn.sap.com/wiki/display/WDABAP/Main
Also you can search weblogs on web dynpro ABAP.
Hope this will help you.
Cheers,
Darshna.

Testing ABAP Web dynpro: Error code 403 and for the reason Forbidden

Hi,
We have NW04s Installed and trying to execute a SAP supplied ABAP web dynpro application DEMO_SIMPLE_MAIN. Please see the following error and let us know which service it's talking about? I am familiar with SICF. However in AS7.0( New name for WEB AS ) The transaction is little different.
Thanks
Arunava
However we are getting the following service error
Service cannot be reached
What has happened?
URL http://server.domain.name.com:8001/sap/bc/webdynpro/sap/demo_simple_main call was terminated because the corresponding service is not available.
Note
The termination occurred in system XXX with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NAME999_XXX_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team

Hi,
this was actually some services which needed to be started through SICF. Once I have started the service sap/bc/public ETC.. and the web dynpro started working. Most of the SAP delivered demo apps are working
However for some ABAP web dynpro ( for some application XRPM ) I get some peculiar error. Please see below and if you could think of anything out of these.
I have already checked and found the both HTTP and SMTP services are working fine.
The following error text was processed in the system PXA : Syntax error in program /1BCWDY/56ZRPAZLU25M8S1BKV2T==CP .
The error occurred on the application server fmsap994_PXA_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP

Launch ABAP Web Dynpro from UWL

I have developed an ABAP Web Dynpro application. The application needs to be launched from the UWL. This is not working. I get the message 404 Not found The requested resource does not exist. I think the problem is with the WebDynproNamespace setting in the UWL config file but i am not sure. Anyone have any ideas? Full points to the working answer
Application Properties (SE80):
Description     DJ: Link AR Invoice to AP Invoice
Component       ZDJLINKINV
Interface View MAIN_WINDOW
Plug Name       DEFAULT
Help Menu Text
Help Link
Show Message Component on Demand
Always Display Message Component
Package         ZSAPPHIRE_SUB_01
Language        EN
URL             http://<removed for security reasons>/sap/bc/webdynpro/sap/zdjlinkinv
Transaction SWFVISU:
(task visualization)
TS90100177 ABAP Web Dynpro
   (visualization parameters)
   APPLICATION ZDJLINKINV
   DYNPARAM     WI_ID=$(item.externalid)
   NAMESPACE   SAP
UWL Configuration:
<ItemType name="uwl.task.webflow.TS90100177.FISystem" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="FISystem" externalType="TS90100177" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproABAPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ZDJLINKINV"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="DynamicParameter" value="WI_ID=$(item.externalid)"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="WebDynproNamespace" value="SAP"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>

Check out the below links:
1) [UWL work item not launching |http://www.surfingincognito.com/index.php?q=aHR0cHM6Ly9mb3J1bXMuc2RuLnNhcC5jb20vdGhyZWFkLmpzcGE%2FdGhyZWFkSUQ9MTYxMzA2OA%3D%3D]
2) [Calling Web Dynpro ABAP application as work item|Calling Web Dynpro ABAP application as work item through workflow.;
3) [Integrating WebDynpro ABAP applications with UWL for workflow in Portal|http://wiki.sdn.sap.com/wiki/display/WDABAP/IntegratingWebDynproABAPapplicationswithUWLforworkflowin+Portal]
Hope it helps you..

ABAP Web Dynpro iView error

My ABAP Web Dynpro iView encouters errors:
The URL http://sp06:8004/sap/bc/webdynpro/sap/z_jgo_demo// was not called due to an error.
Note
The following error text was processed in the system SB2 : WebDynpro Exception: Error in UCF Template POPUP_PAGE ($).
The error occurred on the application server sw06_SB2_04 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: RENDER_TEMPLATE of program CL_WDR_UCF====================CP
Method: HANDLE_TEMPLATE of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
I was able to run the ABAP web dynpro application outside of portal by using the url: http://sp06:8004/sap/bc/webdynpro/sap/z_jgo_demo/. But with the extra / at the end, I get the same error.
Can anyone point me to how to remove that extra / at the end?
Thanks
Ben

Hi Gurus ,
We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
Following are the list of error in EHP4 system ,
1) Layout of ABAP Webdynpro Component are not displayed .
2) Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
error are as follows while trying to view layout in abap webdynpro application :
http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
If any one have information for this kindly let me know .
Thanks :
Vishwas

Call Transaction (BAPI) in ABAP Web Dynpro

Similar Messages

Maybe you are looking for