Calling a secured external web service from ABAP

Hi,
I've created a client proxy from a wsdl to call a secured external WS from ABAP.
The question is: how to pass in the user/password in the client proxy?
thanks

Hi Rika,
have a look to the blog: https://weblogs.sdn.sap.com/pub/wlg/1645. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Screen shots are "old" but the concepts are already there. Serach the chapter "SAP Side - Setup".
Basically: define your RFC destination via SM59 of type G. There you'll define the target host and the user/password.
Then in LPCONFIG you can specify the defined RFC destination.
Have a look also to http://help.sap.com/saphelp_nw2004s/helpdata/en/16/285d32996b25428dc2eedf2b0eadd8/content.htm
and to
http://help.sap.com/saphelp_nw04s/helpdata/en/da/11df3a9b10355ae10000000a11405a/content.htm
Sergio
PS
Kindly close the thread and award appropriate a points to the answer given.
Message was edited by:
Sergio Ferrari

Similar Messages

Calling external web service from ABAP Program

Hi All,
Can somebody point me to the documentation where how to call an external (3rd party) web service from ABAP program is explained?
Thanks & Regards,
-Smita

which version of R/3 you are using. if you are on was 6.40 its very simple, there are delivered tools to generate client proxy for consuming webservice. if you are on wa 6.20 you can use cl_http_client to achieve the same. check out the following weblogs.
/people/durairaj.athavanraja/blog/2005/07/12/send-sms-to-india-from-abap
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Regards
Raja

Consume External Web Service from ABAP

Hello All,
I have a Web Service existing on a Non R/3 system.
I want to access this Web Service from my Development system (SAP 6.40).
I created a Client Proxy pointing to this WSDL named "ZUSER_ARS_EXCHANGECO_UPDATE".
I have created an FM to call this Web Service and update the data to it with the following code ->
DATA: lv_proxy TYPE REF TO zuser_ars_exchangeco_update,
        ws_header TYPE REF TO if_wsprotocol_ws_header,
        sys_fault TYPE REF TO cx_ai_system_fault,
        appl_fault TYPE REF TO cx_ai_application_fault,
        lv_request TYPE zuser_ars_exchangecreate_soap1,
        lv_response TYPE zuser_ars_exchangecreate_soap.
TRY.
      CREATE OBJECT lv_proxy
      EXPORTING
        logical_port_name = 'TO_ARS'
    CATCH cx_ai_system_fault .
ENDTRY.
MOVE-CORRESPONDING ip_userdata TO lv_request-parameters.
TRY.
      CALL METHOD lv_proxy->create
        EXPORTING
          input = lv_request
        IMPORTING
          output = lv_response.
    CATCH cx_ai_system_fault INTO sys_fault.
      IF sys_fault IS NOT INITIAL.
        RAISE proxy_create_system_fault.
      ENDIF.
    CATCH cx_ai_application_fault INTO appl_fault.
      IF appl_fault IS NOT INITIAL.
        RAISE proxy_create_appl_fault.
      ENDIF.
ENDTRY.
But when I am trying to execute, I am getting the error "cx_ai_system_fault " with the following Error Text -> "ARERR [149] Im Steuerungsdatensatz muss ein Benutzername angegeben werden." When translated to English, using Google, it is "ARERR [149] The control record must be a user name."
The WSDL has a line as follows -> soap:header message="s0:ARAuthenticate"
How do I pass the username and password to this "ARAuthenticate" parameter?
Can someone please help me in getting this fixed?
Thanks and Regards
Gladson Jacob

I created an HTTP RFC Destination to the WSDL URL and provided the username and password in the RFC Connection. And called the RFC Destination in the Proxy, instead of calling the URL directly in the proxy. But after that, I am getting some new errors, for which I have not received a solution yet. So, still stuck!!!
For steps on creating a Proxy, I need to know the ABAP version your are using.

Error while calling MII transaction as web service from ABAP

Hello Experts,
I want to call a MII transaction from ABAP program, as a web service.
Following is output of http://<<server>>:50000/XMII/SOAPRunner/TAG_TRX (TAG_TRX is name of my transaction).
<?xml version="1.0" encoding="UTF-8" ?>
- <definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.sap.com/xMII" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://www.sap.com/xMII">
- 
- <types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://www.sap.com/xMII">
- <s:complexType name="InputParams">
- <s:sequence id="InputSequence">
<s:element maxOccurs="1" minOccurs="0" name="WEIGHT" type="s:string" />
<s:element maxOccurs="1" minOccurs="0" name="BATCHID" type="s:string" />
</s:sequence>
</s:complexType>
- <s:element name="XacuteRequest">
- <s:complexType>
- <s:sequence>
<s:element maxOccurs="1" minOccurs="0" name="LoginName" type="s:string" />
<s:element maxOccurs="1" minOccurs="0" name="LoginPassword" type="s:string" />
<s:element maxOccurs="1" minOccurs="0" name="InputParams" type="s0:InputParams" />
</s:sequence>
</s:complexType>
</s:element>
- <s:complexType name="Rowset">
- <s:sequence>
<s:element maxOccurs="unbounded" minOccurs="0" name="Row" type="s0:Row" />
</s:sequence>
<s:attribute name="Message" type="s:string" />
</s:complexType>
- <s:complexType name="Row">
<s:sequence id="RowSequence" />
</s:complexType>
- <s:element name="XacuteResponse">
- <s:complexType>
- <s:sequence>
<s:element maxOccurs="1" minOccurs="0" name="Rowset" type="s0:Rowset" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</types>
- 
- <message name="XacuteSoapIn">
<part element="s0:XacuteRequest" name="parameters" />
</message>
- <message name="XacuteSoapOut">
<part element="s0:XacuteResponse" name="parameters" />
</message>
- 
- <portType name="XacuteWSSoap">
- <operation name="Xacute">
<input message="s0:XacuteSoapIn" />
<output message="s0:XacuteSoapOut" />
</operation>
</portType>
- 
- <binding name="XacuteWSSoap" type="s0:XacuteWSSoap">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="Xacute">
<soap:operation soapAction="http://www.sap.com/xMII" style="document" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
</binding>
- 
- <service name="XacuteWS">
- <port binding="s0:XacuteWSSoap" name="XacuteWSSoap">
<soap:address location="http://<<server>>:50000/XMII/SOAPRunner/TAG_TRX" />
</port>
</service>
</definitions>
Now, when I am using http://<<server>>:50000/XMII/SOAPRunner/TAG_TRX to create a Enterprise Service in SAP (i.e. SE80 transaction-> Create Enterprise Service-> Service Consumer-> URL/HTTP Destination-> URL ... I am getting following error.
Incorrect value: Entity "<<document>>"(5 /93 ). unexpected symbol: '<'
But, whenever I am using the same URL in MII BLS, it does not give any error. It correctly shows all input and output parameters.
Please help me to resolve this issue.
Regards
Neeta.

Now, I am able to create the Web Service in SAP and it is now showing the respective class, attribute and methods to execute this web service (web service to call MII transaction).
But when I am calling it from ABAP (a simple Web Dynpro for ABAP method), it is showing me the following error:
Error (id=GET_BUSINESS_SYSTEM_ERROR): An error occurred when determining the business system (LD_ERROR)
Thought this error is coming from ABAP program, but I am sure that this is related to some configuration at SAP level. (Let me inform you that there are two different servers for SAP Web Dynpro ABAP and SAP MII.
Please help.
Thanks in advance.

How to call a secure external Web Service using Oracle BPEL and OWSM

Hi,
i have to invoke an external secure Web Service using SOA Suite 10.1.3.1, but i don´t know how to do this. Do i use OWSM gateway or Agent? how to configure the gateway or agent to pass the required security to the external secure web service.
thanks in advance
Dong

Are you getting any errors? What type of XAI Class are you using?
One thing I've noticed is that if you are making changes to the XAI Sender you will have to restart the environment before the changes can take effect.
Also, if you are using RTHTTPSNDR as XAI Class you may have to include the HTTP Method - Post in the context.
Hope this helps.
Regards,
Philip

Create an SAP Web Service Consumer (calling External Sharepoint Web Service from ABAP)

hi all,
i am trying to
Create an SAP Web Service Consumer (calling sharepoint Web Service from ABAP) using blog given on following link
Create an SAP Web Service Consumer (calling External Web Service from ABAP)
but when i am using my url at the end of step 3, i am getting error as follows:
i dont want to use local file option. Can anyone help me in this??
thanks in advance
regards,
SDS

Hi SDS,
you recieved a http 404 error when trying to access the Sharepoint Web service. Http 404 indicates that the resource is not reachable (cf. HTTP 404 - Wikipedia, the free encyclopedia). There could be different reasons for that. I'd suggest rubble checking the URL of the Web service first. Try to access it from a browser on you desktop. If the URL is correc. Most likely the SAP system is not able to connect to the URL. This could, for example, be due to some firewall restrictions. You should ask a SAP Basis colleague if they are able to access the URL of the Web service from the server on which the SAP system is running.
Christian

Call webdynpro java Web Service from ABAP

Hello,
This is regarding calling portal web service from ABAP.
1. created web service in NWDS and deployed it to portal server
2. created abap proxy to call this web service from abap SE80 transaction
3. created logical portal for the above proxy LPCONFIG transaction
this is working perfectly. the web service is getting called from abap and funcitonality is working
but my doubt is we have no where given the login password for portal server in the abap system
then how come it works without login password
if i run this web service directly from portal in wsnavigator, then portal login is required.
If we want to incorporate authentication then how to do that ?
thankyou,
B

When you are testing the application in SE80.
Is it ot asking for the user id password.
I created a similar service and for me its asking for user id and password.
Go to SM59 and there look for a RFC destination of type HTTP Connection to External Serv. usually will be named as
SAP_PROXY_ESR.
for this connection check the logon and security tab.
may be some user id and password is given there. means hardcoded.
thanks
sarbjeet singh

Is it possible to call web service from ABAP SAP 4.6 c..If yes how

Hi Friends,
Is it possible to call web service from ABAP-SAP 4.6 c..If yes Could you please let me know how.
Thanks in Advance.
Murali Krishna K
Edited by: Murali Krishna Kakarla on Jan 26, 2008 7:09 PM
Edited by: Murali Krishna Kakarla on Jan 26, 2008 7:11 PM

Olivier CHRETIEN wrote:>
> Hi Terry,
>
> So these function modules must use the SAPHTTPA RFC destination which uses the exe saphttp.exe ?
>
> How much abap code lines do you have for a web service call ?
> Do you have to code the call specifically for each different web service ?
> Are you able to use the WSDL ?
>
> Nice job if you have coded your own private SOAP runtime !
>
> But I don't think this is an easy solution for everybody...
>
> Regards,
>
> Olivier
Yes, SAPHTTPA (runs on application server) and/or SAPHTTP (runs on front-end pc), one of which, is required for HTTP communication. So far, nothing too elaborate as far as SOAP goes, but the logic is simplistic. Here's some sample code:
DEST = 'SAPHTTPA'.
TRANSLATE HOST TO LOWER CASE.
MYURL = 'wssrvTest/Service.asmx/GetByOrderItem'.
CONCATENATE HOST MYURL INTO MYURL.
REQUEST_HEADERS-DATA =
              'Content-type: application/x-www-form-urlencoded'.
APPEND REQUEST_HEADERS.
CLEAR REQUEST_HEADERS.
*........Convert Order Number to External Format........................
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
            INPUT = ORDER
       IMPORTING
            OUTPUT = ORDER.
*........Convert Item Number to External Format.........................
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
            INPUT = ITEM
       IMPORTING
            OUTPUT = ITEM.
*........Convert Material Number to External Format.....................
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
            INPUT = MATERIAL
       IMPORTING
            OUTPUT = MATERIAL.
CONCATENATE 'sOrder=' ORDER
               INTO REQUEST_BODY-DATA.
APPEND REQUEST_BODY.
CLEAR REQUEST_BODY.
CONCATENATE '&sItem=' ITEM
               INTO REQUEST_BODY-DATA.
APPEND REQUEST_BODY.
CLEAR REQUEST_BODY.
CONCATENATE '&sMaterial=' MATERIAL
              INTO REQUEST_BODY-DATA.
APPEND REQUEST_BODY.
CLEAR REQUEST_BODY.
CALL FUNCTION 'HTTP_POST'
       EXPORTING
            ABSOLUTE_URI          = MYURL
            RFC_DESTINATION       = DEST
            BLANKSTOCRLF          = 'X'
       TABLES
            RESPONSE_ENTITY_BODY = RESPONSE_BODY
            REQUEST_ENTITY_BODY   = REQUEST_BODY
            RESPONSE_HEADERS      = RESPONSE_HEADERS
            REQUEST_HEADERS       = REQUEST_HEADERS
       EXCEPTIONS
            CONNECT_FAILED        = 1
            TIMEOUT               = 2
            INTERNAL_ERROR        = 3
            TCPIP_ERROR           = 4
            DATA_ERROR            = 5
            SYSTEM_FAILURE        = 6
            COMMUNICATION_FAILURE = 7
            OTHERS                = 8.
CHECK SY-SUBRC = 0. "more appropriate msg goes here
LOOP AT RESPONSE_BODY.
    IF RESPONSE_BODY+0(7) <> '<string' AND
       RESPONSE_BODY+0(8) <> '</string' AND
       RESPONSE_BODY+0(5) <> '<?xml'.
      SPLIT RESPONSE_BODY-DATA AT '=' INTO FIELD_NAME FIELD_VALUE.
      TRANSLATE FIELD_NAME TO UPPER CASE.
      CASE FIELD_NAME.
        WHEN 'HEIGHT'.
          HEIGHT = FIELD_VALUE.
        WHEN 'WIDTH'.
          WIDTH = FIELD_VALUE.
        WHEN 'LENGTH'.
          LENGTH = FIELD_VALUE.
        WHEN 'WEIGHT'.
          WEIGHT = FIELD_VALUE.
        WHEN 'QTY'.
          QTY = FIELD_VALUE.
      ENDCASE.
    ENDIF.
ENDLOOP.
Hope this helps...
Terry
Edited by: Terry West on Feb 4, 2008 3:08 PM

Problems calling external Web Service from a Java Stored Procedure

I'm using a sample code that I found here about calling external web services from a Java Store Procedure ( Credit Agency Web Service http://www.oracle.com/technology/sample_code/tech/java/jsp/samples/wsclient/Readme.html ) but when I run it ,send this error. I dont know what can I do or what is missing. Please help me. Thanks.
Error: Premature EOF encountered [java.io.EOFException] [SOAPException: faultCode=SOAP-ENV:IOException; msg=Premature EOF encountered; targetException=java.io.EOFException: Premature EOF encountered] at org.apache.soap.SOAPException.(SOAPException.java:77) at oracle.soap.transport.http.OracleSOAPHTTPConnection.send(OracleSOAPHTTPConnection.java:765) at org.apache.soap.rpc.Call.invoke(Call.java:261) at oracle.otnsamples.wsclient.CreditAgencyServiceStub.authorizeCustomer(CreditAgencyServiceStub.java:84) at Products.jspService(Products.jsp:120) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:349) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:795) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:794) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)

I'm also facing problem in running the example on the page http://www.oracle.com/technology/sample_code/tech/java/jsp/samples/wsclient/Readme.html
I've Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and Oracle Application Server 10g (10.1.3). When I executed the following command,
loadjava -thin -user sys/password@localhost:1521:oradb -resolve -synonym -verbose -grant public %OC4J_HOME%/webservices/lib/soap.jar %OC4J_HOME%/lib/dms.jar %OC4J_HOME%/jlib/javax-ssl-1_1.jar %ORACLE_HOME%/lib/servlet.jar %OC4J_HOME%/j2ee/home/lib/mail.jar
... mentioned in step 3 under the "Configuring the Application" section on the above link, the process terminates with the following error
The following operations failed
class oracle/net/www/protocol/https/Handler: resolution
class oracle/net/www/protocol/https/HttpsURLConnection: resolution
class oracle/soap/client/ProviderManagerClient: resolution
class oracle/soap/client/ServiceManagerClient: resolution
class oracle/soap/providers/JavaProvider: resolution
class oracle/soap/providers/ejbprov/EntityEJBProvider: resolution
class oracle/soap/providers/ejbprov/StatefulEJBProvider: resolution
class oracle/soap/providers/ejbprov/StatelessEJBProvider: resolution
class oracle/soap/providers/sp/SpProvider: resolution
class oracle/soap/server/http/SOAPServlet: resolution
class oracle/soap/transport/http/OracleSOAPHTTPConnection$1: resolution
class oracle/soap/transport/http/OracleSOAPHTTPConnection: resolution
class org/apache/soap/messaging/Message: resolution
class org/apache/soap/rpc/Call: resolution
class org/apache/soap/rpc/RPCMessage: resolution
class org/apache/soap/rpc/Response: resolution
class javax/net/DefaultServerSocketFactory: creation (createFailed)
class javax/net/DefaultSocketFactory: creation (createFailed)
class javax/net/ServerSocketFactory: creation (createFailed)
class javax/net/SocketFactory: creation (createFailed)
class javax/net/ssl/DefaultSSLServerSocketFactory: creation (createFailed)
class javax/net/ssl/DefaultSSLSocketFactory: creation (createFailed)
class javax/net/ssl/HandshakeCompletedEvent: creation (createFailed)
class javax/net/ssl/HandshakeCompletedListener: creation (createFailed)
class javax/net/ssl/SSLException: creation (createFailed)
class javax/net/ssl/SSLHandshakeException: creation (createFailed)
class javax/net/ssl/SSLKeyException: creation (createFailed)
class javax/net/ssl/SSLPeerUnverifiedException: creation (createFailed)
class javax/net/ssl/SSLProtocolException: creation (createFailed)
class javax/net/ssl/SSLServerSocket: creation (createFailed)
class javax/net/ssl/SSLServerSocketFactory: creation (createFailed)
class javax/net/ssl/SSLSession: creation (createFailed)
class javax/net/ssl/SSLSessionBindingEvent: creation (createFailed)
class javax/net/ssl/SSLSessionBindingListener: creation (createFailed)
class javax/net/ssl/SSLSessionContext: creation (createFailed)
class javax/net/ssl/SSLSocket: creation (createFailed)
class javax/net/ssl/SSLSocketFactory: creation (createFailed)
class javax/security/cert/Certificate: creation (createFailed)
class javax/security/cert/CertificateEncodingException: creation (createFailed)
class javax/security/cert/CertificateException: creation (createFailed)
class javax/security/cert/CertificateExpiredException: creation (createFailed)
class javax/security/cert/CertificateNotYetValidException: creation (createFailed)
class javax/security/cert/CertificateParsingException: creation (createFailed)
class javax/security/cert/X509Certificate: creation (createFailed)
exiting : Failures occurred during processing
I've checked the path to all the jar files.
I tried to run the command again with system/password instead sys/password but then I got the following stacktrace:
The following operations failed
class oracle/net/www/protocol/https/Handler: resolution
class oracle/net/www/protocol/https/HttpsURLConnection: resolution
class oracle/soap/client/ProviderManagerClient: resolution
class oracle/soap/client/ServiceManagerClient: resolution
class oracle/soap/providers/JavaProvider: resolution
class oracle/soap/providers/ejbprov/EntityEJBProvider: resolution
class oracle/soap/providers/ejbprov/StatefulEJBProvider: resolution
class oracle/soap/providers/ejbprov/StatelessEJBProvider: resolution
class oracle/soap/providers/sp/SpProvider: resolution
class oracle/soap/server/http/SOAPServlet: resolution
class oracle/soap/transport/http/OracleSOAPHTTPConnection$1: resolution
class oracle/soap/transport/http/OracleSOAPHTTPConnection: resolution
class org/apache/soap/messaging/Message: resolution
class org/apache/soap/rpc/Call: resolution
class org/apache/soap/rpc/RPCMessage: resolution
class org/apache/soap/rpc/Response: resolution
exiting : Failures occurred during processing
Thanks in advance for any useful help.
-

Error while trying to call external web service from oracle PL/SQL 10.2 g

Hi I am trying to call an external web service from oracle PL/SQL .I am getting following run time error when I try to set the opeartion style.
But as per the oracle documentation this is one of the 2 valid values.
ORA-29532: Java call terminated by uncaught Java exception: operation style: "document" not supported.Teh webservice does expect the operation style as document.
Following is the code I am executing.
FUNCTION email
return varchar2
AS
service_ SYS.utl_dbws.SERVICE;
call_ SYS.utl_dbws.CALL;
service_qname SYS.utl_dbws.QNAME;
port_qname SYS.utl_dbws.QNAME;
operation_qname SYS.utl_dbws.QNAME;
string_type_qname SYS.utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params SYS.utl_dbws.ANYDATA_LIST;
l_input_params SYS.utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://webservices.imacination.com/distance/Distance.jws?wsdl
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://service.xmlservices.global.freedomgroup.com/';
-- search for 'service name' in the wsdl
service_qname := SYS.utl_dbws.to_qname(l_namespace, 'ClientCoreWebServiceBeanService');
-- this is just the actual wsdl url
service_ := SYS.utl_dbws.create_service(HTTPURITYPE('http://hostname/GlobalWebServices/services/ClientCoreWebService?wsdl'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := SYS.utl_dbws.to_qname(l_namespace, 'ClientCoreWebServiceBeanPort');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'getCity'
operation_qname := SYS.utl_dbws.to_qname(l_namespace, 'postalCodelookup');
-- bind things together
call_ := SYS.utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
SYS.utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <wsdl:operation name="getCity">
-- it is blank, so we make it ''
SYS.utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle' under <wsdl:operation name="getCity">
SYS.utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
SYS.utl_dbws.set_property(call_, 'OPERATION_STYLE', 'DOCUMENT');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <wsdl:message name="getCityResponse"> you will see the line <wsdl:part name="getCityReturn" type="xsd:string" />
-- thus the return type is 'string", removing 'xsd:'
string_type_qname := SYS.utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- in the line <wsdl:operation name="getCity" parameterOrder="zip">
-- the parameterOrder is 'zip', thus we put in 'zip'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the sys.utl_dbws package
--vj this cud be either params or xml
SYS.utl_dbws.add_parameter(call_, 'param1', string_type_qname, 'ParameterMode.IN');
SYS.utl_dbws.add_parameter(call_, 'param2', string_type_qname, 'ParameterMode.IN');
SYS.utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('<TFGGlobalBasicXMLDO><systemCd>GLOBAL</systemCd><username>GlobalAdmin</username><password>GlobalAdmin</password><localID>1</localID></TFGGlobalBasicXMLDO>');
params(1) := ANYDATA.convertvarchar('<TFGGlobalPostalCodeLookupIDDO><postalCode>02446</postalCode><countryCode>USA</countryCode><stateCode>MA</stateCode><cityDisplay>BROOKLINE</cityDisplay><countyDisplay>NORFOLK</countyDisplay><include_inactive_flag>True</include_inactive_flag></TFGGlobalPostalCodeLookupIDDO>');
-- invoke the web service
retx := SYS.utl_dbws.invoke(call_, params);
dbms_output.put_line(retx.gettypename);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('done' || retx_string);
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
SYS.utl_dbws.release_service(service_);
return retx_string;
end email;

thsi is urgent anybody ????

Calling web service from ABAP - version 4.6C

Hi,
I would like to know how to call a web service from ABAP. Version is 4.6C. Any help would be greatly appreciated.
Thank you,
Rekha

Hi Rekha,
Please go through these..
call web service using ABAP
http://help.sap.com/saphelp_nw04/helpdata/en/a0/da0710b6560a4e80fb94f3f712dfc0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e9/ae1b9a5d2cef4ea4b579f19d902871/frameset.htm
Hope these help you!
cheers,
Prashanth

How to call an external web service from OIM?

Hi,
I have a question on how to call an external web service from OIM within e.g. creating user process? How should it be done; through adapter and task in the process?
Any recomendations?
Thanks in advance!

it is not clear to me if you are having problems with calling java code from OIM or if the problem is the web service API.
Lets do some divide and conquer:
Can you create a simple java class that just writes a couple of lines to the log? Please attach this code to the OIM task and make sure it runs.
Once this works we can start looking at the web service call.
Best regards
/Martin

Calling external web service from XI 3.0

Does anyone know how I can call an external web service from xi to post a message? I have a WSDL for the web service.

Hi,
Refer the how to guide, How To Develop a Simple Web Service Application Using SAP NetWeaver Developer Studio & SAP XI, You can find at ,
https://websmp106.sap-ag.de/nw-howtoguides
--> EXCHANGE INFRASTRUCTURE.
Or
https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
Yes, u may use WSDL.
Regards,
Anirban.

Calling an external web service from SharePoint 2010

Hi Friends,
Idea is to call an external web service from SharePoint 2010 list.
Can we do this using visual studio 2010, how.
another pointers, please advise.

Hi,
You can create Windows Communication Foundation (WCF) web services that you can consume as external content types from Microsoft Business Connectivity Services (BCS).
For more information, you can refer to:
http://msdn.microsoft.com/en-us/library/office/gg318615(v=office.14).aspx
http://www.c-sharpcorner.com/UploadFile/Roji.Joy/connecting-to-a-web-service-using-business-connectivity-serv/
http://blogs.msmvps.com/windsor/2011/11/04/walkthrough-creating-a-custom-asp-net-asmx-web-service-in-sharepoint-2010/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

HELP!!! Problem of Calling external Web Service from a Java Stored Procedur

1.I read the topic on http://www.oracle.com/technology/sample_code/tech/java/jsp/samples/wsclient/Readme.html about Calling external Web Service from a Java Stored Procedur.
2.After I import .jar to Oracle what is required by the topic,som error occued.
Like: ORA-29521: javax/activation/ActivationDataFlavor class not found,
ORA-29545: badly formed class.
3.These is not enough .jar required on the topic? What can I do for ORA-29545: badly formed class?
Thany you!

Try this
Re: HELP! Loading Java Classes into Oracle ERROR

Calling a secured external web service from ABAP

Similar Messages

Maybe you are looking for