Calling ActiveX from WebDynpro ABAP application

Hello everyone,
I am looking for the possibility of calling an ActiveX control based application by extending my Web Dynpro ABAP application. Is this possible at all?
Thanks,
Amber
Message was edited by: Amber Gupta

Saraa_n wrote:
Hello Bala,
>
> I doubt whether you can pass parameter for the TCODE ME23N because in the ME23N transaction, you can select the PO only via the popup dialog and you cannot directly enter the PO number.
>
> I dont think while calling TCODE via ITS you can set value in the popup dialog and execute it. Alternative would be to use ME23 TCODe.
>
> BR, Saravanan
It is correct taht ME23N can be tricky (as can MIGO and MIRO) because of the way they launch. I've done this in the past by creating a new custom program and TCoce. The custom program has a simple parameter for the PO # so it can be passed in via URL. The logic of the custom program then starts a call transaction and handles the popup and supplies the PO #.

Similar Messages

Probelm in calling ME23N from WebDynpro ABAP application.

Dear All,
My requirement is to call the transaction ME23N by doing some action from WDA application.
And I have to pass the Purchase Order Nubmer from this WDA application.
This is for your information, For this I have created the Transactional iView for ME23N and I am using the PCD location .*
I am using the " navigate_absolute " method from the portal intergration ( IF_WD_PORTAL_INTEGRATION ).
There I am passing the launching paramerters and Business parameters . It is opening the ME23N Screen, But it is not taking the purchase order number what I am paasing in the business parameters . It is always taking the default purchase order number.
And one more this , the same thing i have tried for VA03 transaction, here everything is going fine.
But I did not understand the why it is not taking purchase order number what I am passing from the WDA application in the business parameters.
Hope I have given my query clearly...
Please help me...
Thanks & Regards,
Veerendra Nath

Solution found.
You can use Tcode MMPURPAMEPO Tcode.
In your URL set the parameter P_EBELN with the PO number and set the OKCODE to execute the report.
This transaction is used in Portail only.
You can found the same for MIGO/MIRO and several other Tcode.
Regards
Ludovic Bento

Calling GuidedProcess from WebDynpro ABAP

Hi all
can anybody tell me that how to call GP from webdynpro ABAP.
and what are the advantages and disadvantages in this scenario??
if anyone reply then it would be the great help to me
Regards
Suresh babu

Hey,
You can call a GP from WD ABAP through by implementing a service call from a method that is embedded in your WD. You can refer this link for the same.
http://help.sap.com/saphelp_nwce10/helpdata/en/44/58f9cc0d95311ce10000000a155369/frameset.htm
But you should note here that Data exchange between ABAP WD and GP is not two way but its only one way.
Cheers,
Mandrake

How to access SQL tables from WebDynPro ABAP application ?

Hi,
I am trying a scenario, where I need to send an user ID to SQL server table (update/modify/delete) from webDynpro ABAP application.
Basically ,I am trying to know:---
a>How to write a SQL Connection from ABAP code within webdynpro ABAP application
b>What are the ways to do it.(by code or any other API/mechanism)
I appreciate if anybody knows this.
Thanks
Praveen

Hi,
The EXEC CONNECT ... is usually used in the procedural ABAP code. For this you can refer to the ABAPDOCU.
I dont have any sample code on the classes I listed try to check out them for the parameters and the methods they have.
In WD for Java, we have these connection classes to connect to any databsae server.
Or try to create an RFC with DESTINATION for this
Pls check out this link for this -
Pull data from another r3 server using abap dynpro
Regards
Lekha

Calling Webdynpro Java Application from Webdynpro ABAP Application.

Hi,
We have developed one Application using Webdynpro Java and I m in need to call the Webdynpro Java application from Webdynpro ABAP.
Require Suggestions to acheive this.
Thanks In advance.
Reg,
Ajay.

Dear Ajay,
Assuming that both your applications WDA & WDJ are in the portal & you don't have to pass any parameters to the WDJ application.
Write the following code on the action where you would call the WDJ application.
DATA:
        lr_compcontroller TYPE REF TO ig_componentcontroller,
        l_component TYPE REF TO if_wd_component ,
        lr_port_manager TYPE REF TO if_wd_portal_integration ,
        wa_navigation TYPE navigation.
lr_compcontroller =   wd_this->get_componentcontroller_ctr( ).
l_component = lr_compcontroller->wd_get_api( ).
lr_port_manager = l_component->get_portal_manager( ) .
* The value inserted into the navigation-target field can be found in the Portal
* content administration tab of your portal. It is the ID or PCD Location field
wa_navigation-target = pcd. " Please provide the PCD Location of the WDJ Application here.
wa_navigation-mode   = '0'. "0 = INTERNAL(same page) and 1 = EXTERNAL(new page).
CALL METHOD lr_port_manager->navigate_absolute
    EXPORTING
      navigation_target = wa_navigation-target
      navigation_mode   = wa_navigation-mode.
You can get the PCD from the Page properties of the WDJ application page in the Portal.
Hope it helps!
Warm regards,
Upendra Agrawal

Calling a portal page from WebDynPro ABAp application

Hi,
I would like to call a portal page (any type) from a WebdynPro ABAP application. I have the PCD location of the page.
Which call shall I make :
Absolute Navigation
Relative Navigation or
OBN.
Also, can anyone send me short code snippet on the following.
The package SWDP test examples are not working.
Best Regards
Sid

Hi Siddharth,
Well, to start with you can go for ABSOLUTE NAVIGATION.
Secondly, you can find the snippet here
DATA LO_API_COMPONENT TYPE REF TO IF_WD_COMPONENT.
DATA LO_PORTAL_MANAGER TYPE REF TO IF_WD_PORTAL_INTEGRATION.
DATA L_NAVIGATION_TARGET TYPE STRING.
LO_API_COMPONENT = WD_COMP_CONTROLLER->WD_GET_API( ).
LO_PORTAL_MANAGER = LO_API_COMPONENT->GET_PORTAL_MANAGER( ).
MOVE 'pcd://portal_content/com.xxxx.zpof_f_XXXXportalcontent/com.xxxx.test/com.xxxx.folders.MaintenanceBusinessPackage/com.xxxx.test.mt.pages.Pages/com.xxxx.pages.MaintenanceTasks'
 to l_navigation_target.
CALL METHOD lo_portal_manager->NAVIGATE_ABSOLUTE
 EXPORTING
 NAVIGATION_TARGET = L_NAVIGATION_TARGET
* NAVIGATION_MODE = IF_WD_PORTAL_INTEGRATION=>CO_SHOW_INPLACE
* WINDOW_FEATURES =
* WINDOW_NAME =
* HISTORY_MODE = IF_WD_PORTAL_INTEGRATION=>CO_NO_DUPLICATES
* TARGET_TITLE =
* CONTEXT_URL =
* POST_PARAMETERS = ABAP_FALSE
* USE_SAP_LAUNCHER = ABAP_TRUE
* BUSINESS_PARAMETERS =
* LAUNCHER_PARAMETERS =
Above it, the examples of SWDP will not work if you test them from SE80-ABAP WAS...I suggest you to create a WDA IView in Portal and test it in Portal itself.
Hope this should solve your problem.
Regards
Raja sekhar

Exit from Webdynpro abap application in portal environment

Hi,
I created one custom service in Webdynpro ABAP in ESS and also integrated in the portal environment
I need to put Exit button in every page ( OVERVIEW, EDIT, REVIEW). When user click on 'EXIT' button from any one of page , it should return back to PERSONAL INFORMATION in ESS Homepage.
I have used Exit plug in window , but i read in SAP Library Exit plugs will not work in portal environment.
Let me know which way i should proceed to acheive the Exit functionality.

HI,
Add the following code in action of exit and also add the application parameter which gets the area page from the portal.
Apart from this, do the configuration settings in these screens ( Define resources, Define services ) in SPRO.
DATA: countrygrouping TYPE molga,
 arealink TYPE rhxss_ser_linkinfo_s.
DATA:
 node_settings TYPE REF TO if_wd_context_node,
 elem_settings TYPE REF TO if_wd_context_element,
 stru_settings TYPE if_componentcontroller=>element_settings .
navigate from <CONTEXT> to <SETTINGS> via lead selection
node_settings = wd_context->get_child_node( name = if_componentcontroller=>wdctx_settings ).
get element via lead selection
elem_settings = node_settings->get_element( ).
get all declared attributes
elem_settings->get_static_attributes(
 IMPORTING
 static_attributes = stru_settings ).
CALL FUNCTION 'RH_PM_GET_MOLGA_FROM_PERNR'
 EXPORTING
 pernr = stru_settings-personnelnumber
 begda = sy-datum
 endda = sy-datum
 IMPORTING
 molga = countrygrouping.
CALL FUNCTION 'HRXSS_SER_GETAREALINK'
 EXPORTING
 areagroupkey = stru_settings-home_service
 areakey = stru_settings-area_service
 portalcontext = 'X'
 personnelnumber = stru_settings-personnelnumber
 countrygrouping = countrygrouping
 IMPORTING
 arealink = arealink
 EXCEPTIONS
 areagroupkey_invalid = 1
 areakey_invalid = 2.
DATA: l_portal_manager TYPE REF TO if_wd_portal_integration,
 l_api type ref to IF_WD_COMPONENT.
l_api = wd_this->wd_get_api( ).
l_portal_manager = l_api->get_portal_manager( ).
l_portal_manager->navigate_absolute(
 navigation_target = arealink-linkpcdpage
 navigation_mode = if_wd_portal_integration=>co_show_inplace
 history_mode = if_wd_portal_integration=>co_no_duplicates

Problem in calling Webservice from Webdynpro ABAP

I want to call a BAPI FM which is available in SAP ECC server when user is clicking on a button in a web dynpro application which is available in SAP Portal server.
For example,
Portal server name is DVP-EPP &
ECC server name is DVP-ECC
I have the done the following steps to achieve it,
In Server DVP ECC:
1) Created Web service from the standard BAPI FM (SE37-->Utilities-->More Utilities-->Create WebService --> From the the Func.Module)
2) Downloaded the WebService as WSDL file from SOAMANAGER
3) Tested the Web service through SE80, it is correctly calling the BAPI & creating necessary data.
In Server DVP EPP:
4) Created a Proxy class as follows,
a) SE80 --> Package --> Create --> Enterprise service
b) Selected Object type "Service Consumer"
c) Selected Service Consumer "Local File"
d) Browsed and selected WSDL file downloaded from DVP ECC
e) Selected the Package, Prefix, Request, Completed the process & Activated it.
5) Configured the Logical port as follows,
a) Selected my Proxy class through F4
b) Wrote a name for Logical port, Selected 'Default port' checkbox and selected 'Create'
c) In the next screen, in 'Call parameters' tab, selected the 'URL' radio button & mentioned the URL of the WSDL-Document created in DVP-ECC system
d) Saved the data & activated it
5) Now, tested the service through (SE80-->Package-->Enterprise Services-->Client Proxy) option.
6) When I test it, system prompts a dialog box for User-Name & Password (as available in DVP-ECC system).
After the details are given, system throws the Information message as "SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/" - Exception of class CX_AI_SYSTEM_FAULT
No record is created in DVP-ECC through the WebService BAPI.
Please tell me whether the steps that I followed are correct as per my requirement and a solution for the above interruption.
Thanks in advance

Good day guys,
Somehow I managed to resolve the above error.
Now in DVP-EPP system, I am able to Test the Web service Client Proxy (through SE80) and a record is successfully created in destination system (DVP-ECC).
Now, in Webdynpro I am unable to call this webservice proxy class.
System throws the error,
Error (id=SoapFaultCode:5): Web service processing error; more details in the
web service error log on provider side (UTC timestamp 20141006045544;
Transaction ID 9A144DE49C12F1B5A6B9E41F137BE3CC)
I just created a sample WDA application and on click of a button I am calling the Webservice Proxy class as follows,
Method on_submit_click().
TRY.
      CREATE OBJECT wd_assist
        EXPORTING
          logical_port_name = 'ZLOG_PORT'. "Logic port creatd for Proxy class (in SOAMANAGER)
      CALL METHOD wd_assist->bus1240create     "Method available in generated Proxy Class
        EXPORTING
          input = ls_inp
        IMPORTING
          output = ls_outp.
    CATCH cx_ai_system_fault.
ENDTRY.
ENDMETHOD.
Do I have to do any thing additionally in order to call the WebService in WDA?? Because, in the same system, if I test it in SE80, record is perfectly created in destination server.
Also please suggest if I have to do any other configuration changes related to this.
Keenly awaiting your reply.
Have a nice day .
Thank you.

Pass value from webdynpro abap application to bsp application

Hello,
I want call api bsp javascript from WDA exchanging values between the two applications.
I have a solution but it is with portal integration.
I would like a procedure without using the portal.
Webdynpro and BSP only.
How can I do this ?
Thanks for your help.

Hi,
Refer these threads-
Re: Passing Object ref to Webdynpro Application while calling from BSP screen
Both BSP and WDA has an URL associated with it.
In the WDA, create an LinkToUrl UI element upon which triggers the BSP application and pass the parameters to this BSP application. Check for this BSP application has also parameters in it.
Refer this link Re: Read SICF URL
Regards,
Lekha.

How to call a webService from WebDynPro ABAP ?

We are trying to call a webService from WebDynPro-ABAP application. It is not working, While if we are calling the WebService from a Report, it is working.
How exactly do we call a WebService from a WebDynPro-ABAP application?
What are the main steps involved ?

Hi Phani,
You will need to create a service call as follows.
Right click on your WD component name and select Create->Service Call
The wizard will guide you through a series of steps to make a Web Service Call. On the 3rd screen, it will give you options such as Function Module, Web Service, etc
Before making a service call, you will need to create a proxy for the Web service in the ABAP Workbench using a WSDL document as a basis. To create or consume Web services, you will need the authorizations associated with the role SAP_BC_WEBSERVICE_ADMIN.

Calling Portal iView from a WebdynPro ABAP application

Hi ,
I have a requirement where I need to call an iView in my portal from the Webdynpro application also existing in the portal.
Can anyone provide me the method with source code( if possible ) to call an iView existing in the portal from the WebDynPro ABAP application.
Best Regards
Sid

Hi Siddharth,
Well, I think you can go for Portal Navigation concept.
Please check the required source code in WDR_TEST_PORTAL_NAV Web Dynpro component. That will illustrate both Page based Navigation and Object based Navigation.
Hope that should solve your problem.
Regards
Raja Sekhar

Need a call a portal iView from a WebDynPro ABAP Application

Hi,
I have to call a portal iView from the WD ABAP application.
The iView root is e.g.
folder1/folder2/check_workset1/iView
How can we call it using Absolute navigation or Relative Navigation.
I just want to call this path.
Can anyone provide me with a code snippet.
Best Regards
Sid

Hi ,
I am calling the following method in my action call of a Webdynpro ABAP View
CALL METHOD lo_portal_manager->NAVIGATE_ABSOLUTE
EXPORTING
    NAVIGATION_TARGET   = 'Roles://portal_content/xxxx._and_remuneration'
    NAVIGATION_MODE     = IF_WD_PORTAL_INTEGRATION=>CO_SHOW_EXTERNAL
   WINDOW_FEATURES    =
   WINDOW_NAME        =
   HISTORY_MODE       =
   TARGET_TITLE       =
      CONTEXT_URL       = 'http://xxx.xxx.adsint.biz:50000/irj/portal'
   POST_PARAMETERS    = ABAP_FALSE
   USE_SAP_LAUNCHER   = ABAP_TRUE
   BUSINESS_PARAMETERS =
   LAUNCHER_PARAMETERS =
But it is still noot opening the page for me from the WD ABAP application.
Can anyone let me know , what can be the reason.
Best Regards
Sid

Error when Interative Adobe Form is called from Webdynpro ABAP.

Hi Experts,
I trying to call a Interactive adobe form from ABAP Webdynpro application but I am facing the below error.
Line: -
The following error text was processed in the system GJD : User session (HTTP/SMTP/..) closed after timeout
The error occurred on the application server az18u021_GJD_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Line: -
When I uncheck the enabled property of the Interactive From in the Page of the WebDynpro I am able to execute the application successfully.But the Adobe form behaves as a Static Form when I uncheck the enabled property.
So kindly provide your valuable suggestions to avoid the above error when I am calling a Interactive adobe form from Webdynpro ABAP.
Thanks in Advance.
Regards,
Arun.

Hello,
Hello, are you sure you have your ADS credentials configured correctly and valid? I guess you know that is the only difference between clicking enabled on true or false. If you are not sure, you can use SE38, search for FP_* and pick some reports to check the licencing. The names of the reports are good enough to recognize the right one.
Or maybe that is a security problem? Have you checked the ADS_ERROR string? Did you use the ADS trace?
check: http://help.sap.com/saphelp_nw70/helpdata/en/2c/241a427ff6db2ce10000000a1550b0/content.htm
and especially note 999998
Regards, Otto

Calling Java code from Webdynpro Abap UI

Hi All,
Can anybody tell me, How to make calls to java code on a button click from webdynpro ABAP UI ?
Thanks in Advance.
Jenish .V. Joy

Hi Jenish,
As I am new to WebDynpro for ABAP I could not help you out exactly.But See this link which will help you to create applications in WebDynpro by using ABAP language.
https://www.sdn.sap.com/irj/sdn/developerareas/abap?
rid=/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
If you get any answer for your question let me know.
Regards,
Karthick K Eswaran

Webdynpro abap application attached to SWFVISU is tested from se80

hi,
when webdynpro ABAP application is attached to workitem in SWFVISU the the workitem id is passed via url when calling the application. (though the url seen in the application in se80 in the webdynrpo abap component does not have workitem id paramter)
[link1|http://forums.sdn.sap.com/thread.jspa?threadID=1209159]
[link2|http://forums.sdn.sap.com/thread.jspa?threadID=226957]
[link3|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6?QuickLink=index&overridelayout=true]
I am running this application from se80 - application - right click - test. (this is required to troubleshoot one of the issues.)
at this time it does not ask for workitem id and directly runs the application . It picks the same workitem id everytime. I tried doing this with a couple of different user ids. but I cant figure out from where it picks this particular workitem id. the status of this workitem is complete in the system.
thanks
bhakti

Hi-
(though the url seen in the application in se80 in the webdynrpo abap component does not have workitem id paramter)
It is required to have a parameter WI_ID (as an Application parameter) in your WDA. And via this Application parameter WDA will receive the workitem id, when the task is exceuted from UWL (provided configuration is done in swfvisu)
Could you confirm, there is no Application parameter (WI_ID) in your WDA?
It picks the same workitem id everytime. I tried doing this with a couple of different user ids. but I cant figure out from where it picks this particular workitem id
If you defined WI_ID in Application parameter and there is an option to provide value and it seems, you have defined some value over there or other way might be in your method (inbound plug), you may gave default value to WI_ID in the parameter
If your application is working properly from UWL and for testing purpose, you could put a breakpoint and change the workitem id, when executing from se80
Vinoth

Calling ActiveX from WebDynpro ABAP application

Similar Messages

Maybe you are looking for