Calling HTTP Service with Query string in Orchestration

Hi,
I have to BTS orchestration as a service to my end user. In Orchestration i have to call "http://abc.net/.xyz?a=101&b=102" service and response send to end user. a and b values are to be passed by end user system.Could you please help me how
to work on this requirement

When you use querystring in your URL, then your are not calling a webservice. You need a non-SOAP
adapter.
Best bet for you is to use
REST (WCF-WebHttp) adapter if you use BizTalk Server 2010 R2 or more. Otherwise
webHttpBinding with WCF-Custom
For use BizTalk Server 2010 R2 or more:
http://blogs.biztalk360.com/rest-wcf-webhttp-adapter-in-biztalk-server-2010-r2/
You can use webHttpBinding (that supports consuming and exposing ReSTful services) available with WCF-Custom adapter can send non-SOAP
messages. Refer this article for more info:
https://social.technet.microsoft.com/wiki/contents/articles/2474.invoke-restful-web-services-with-biztalk-server-2010.aspx
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Similar Messages

Sling mapping issue with Query String

For a button component, URL behaves differently with query string. Please let me know the sling mapping example for query string.
Button component behavior across env:-
Working Scenario:-
- In Author edit mode, URL pointing to "/content/<websitelink>"
- In Author preview mode shows URL "<host>:<port>/content/<websitelink>.html"
- In Publisher mode shows URL, "<host>:<port>/<websitelink>", we do not want "/content" before website link so it is fine.
Failure Scenario with query string:-
- In Author edit mode URL pointing to "/content/<websitelink>?username=han"
- In Author preview mode with URL "<host>:<port>/content/<websitelink>?username=han"
- In Publisher mode, <host>:<port>/content/<websitelink>?username=han - Here we see the content, which is not acceptable in our scenario.
Please let me know the mapping changes when we have a URL with query string.

1) I assume you configure as per the rules mentioned in http://sling.apache.org/site/mappings-for-resource-resolution.html --> 'Mapping Entry Specification' under /etc/map. Based on the configuration in /etc/map and the website that we publish, it translates and shows all the applicable combination in the Felix console http://<host>:<port>/system/console/jcrresolver.
2) How does Adobe CQ 5.4 resolve the right mapping, if we have multiple map folder like below in /etc directory with the same website with different rules.
etc/map --> http --> <website> with property sling:match, sling:internalRedirect
etc/map.publish --> http --> <website> with property sling:match, sling:internalRedirect
etc/map.publish-stag --> http --> <website> with property sling:match, sling:internalRedirect
Kindly clarify.

File uri with query string can't be propagated by desktop.browse()

I have been trying to show some help pages using the following command:
java.awt.Desktop.getDesktop().browse( helpURI);
while the helpURI.toString() prints out the following:
file:///C:/Share/Code/phoenix/Install/REDIST/Help_Files/en/wwhelp/wwhimpl/js/html/wwhelp.htm?context=BD&href=Chapter%202%20-%20Configuration.1.14.html
But when the getDesktop().browse() API is executed it will only propagate the uri-path and not the query string.
So the browser shows the following url as a result of the browse() call:
C:\Share\Code\phoenix\Install\REDIST\Help_Files\en\wwhelp\wwhimpl\js\html\wwhelp.htm
But if I manually copy the string "file:///C:/Share/Code/phoenix/Install/REDIST/Help_Files/en/wwhelp/wwhimpl/js/html/wwhelp.htm?context=BD&href=Chapter%202%20-%20Configuration.1.14.html" to the internet explorer it works fine.
So can somebody give me any guidance on how I can propagate the file uri with query string through the browse() API or is there a better API for that?
Sibon.

The "cmd /S /C" suggestion didn't seem to work. I don't think the problem is in java but how the command line parameter needs to be added from msdos shell to "iexplore.exe"
When from the command line I enter the following command:
iexplore.exe file:///C:/Share/Code/phoenix/Install/REDIST/Help_Files/en/wwhelp/wwhimpl/js/html/wwhelp.htm?context=BD&href=Chapter%202%20-%20Configuration.1.14.html
I get the same result as invoking from java Desktop API --- it truncates everything from question mark. I tried palying around with double quotes, single quotes, escaping and nothing seem to work.
Any ideas?

SharePoint 2013 List View with query string filter stops working after editing view from browser

I have created one list definition in which I have added one list view which will filter data from query string paramater
So when I am creating list from my list definition, view with query string filter is working fine.
But when I am modifying view from UI(I am not changing any thing , just opening "Modify View" page and then click on "Save" button), view gets stop working means it's not filtering data based on query string
Any suggestion what I am missing?
Below is my list view schema
<View BaseViewID="11" Type="HTML" TabularView="FALSE" WebPartZoneID="Main" DisplayName="$Resources:OIPLBScoreCard,viewFilterTasksByTarget;" MobileView="True" MobileDefaultView="False" Url="FilteredTasks.aspx" SetupPath="pages\viewpage.aspx" DefaultView="FALSE" ImageUrl="/_layouts/15/images/issuelst.png?rev=23">
<Toolbar Type="Standard" />
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
<ParameterBinding Name="TargetId" Location="QueryString(TargetId)" />
</ParameterBindings>
<JSLink>hierarchytaskslist.js</JSLink>
<XslLink Default="TRUE">main.xsl</XslLink>
<JSLink>clienttemplates.js</JSLink>
<RowLimit Paged="TRUE">100</RowLimit>
<ViewFields>
<FieldRef Name="Body"></FieldRef>
<FieldRef Name="Title"></FieldRef>
<FieldRef Name="StartDate"></FieldRef>
<FieldRef Name="DueDate"></FieldRef>
</ViewFields>
<ViewData>
<FieldRef Name="PercentComplete" Type="StrikeThroughPercentComplete"></FieldRef>
<FieldRef Name="DueDate" Type="TimelineDueDate"></FieldRef>
</ViewData>
<Query>
<Where>
<Eq>
<FieldRef Name="oipscTargetLookup" LookupId="TRUE"/>
<Value Type="Lookup">{TargetId}</Value>
</Eq>
</Where>
</Query>
</View>
I have one lookup field from "Target List" in my source list and I want to filter data based on that lookup field.

Hi JayJT,
The Miscellaneous is located in the contact list that you used for the connection.
So , you need to edit the page, then edit the contact list that you used, in the web part properties of the contact list, you will find Miscellaneous, then expand it and select ‘Server Render’ .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How to call rest service with POST Http method in SMP2.3 HWC?

Hi Experts,
I am doing a sample for Rest Service in smp.
http://192.168.1.119:8086/Test/services/Products
I am calling the above service in the smp it is pulling the data from the service with GET Http Method.
Now i want to call this service for login functionality.
http://192.168.1.119:8086/Test/services/auth?uname=:uname&pass=:pass
here :uname &:pass values are argument values for the uname & pass.
the output of the service is
http://192.168.1.119:8086/Test/services/auth?uname=sravanya.k&pass=sravanya
<?xml version="1.0" encoding="UTF-8"?>
<details>
<responsecode>200</responsecode>
<profile>
<firstname>sravanya</firstname>
<lastname>k</lastname>
<email>[email protected]</email>
<chart_type>North</chart_type>
<location>MACHILIPATNAM</location>
<language>English</language>
</profile>
</details>
How can i do this?
Thanks & Regards,
Sravanya K

Create a uriTemplate like this
/auth?uname={uname}&pass={pass}
use GET method only.
generate the personalization keys.

Calling Web Service with SOAP header from BPEL

Hi,
I am calling a web service (with header information) from BPEL. In the Invoke activity, i created a header variable to pass the header information.
But, when i test the BPEL service, invoke activity fails because the header information is not being passed.
Below is the error message (copied from clipboard).
+<messages><input><Invoke_1_getsubinfo_InputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="parameters"><getsubinfoElement xmlns="http://ws/its/tabs/webservices/SingleRowWS/SingleRowWS.wsdl">+
+<pSubnoin>+
+<insubno>12345678</insubno>+
+</pSubnoin>+
+</getsubinfoElement>+
+</part></Invoke_1_getsubinfo_InputVariable></input><fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke:+
start fault message:+
Internal Server Error (Caught exception while handling request: javax.xml.rpc.JAXRPCException: Not authenticated user)+
*:end fault message*</summary>
+</part></bindingFault></fault></messages>+
As said, no header information is visible in the Invoke activity.
Please provide help for the above issue.
-MJ

Hello Patrick,
Thanks for the response. I am using normal assign activity to assign values to the header variable as shown below. HeadMT is the header variable which is passed in the invoke activity.
+<assign name="Assign_Header">+
+<copy>+
+<from expression="'tkl12'"/>+
+<to query="/ns1:LOGIN_INFO/ns1:USER_NAME" variable="*HeadMT*"+
part="payload"/>
+</copy>+
+<copy>+
+<from expression="'tkl123'"/>+
+<to query="/ns1:LOGIN_INFO/ns1:PASSWORD" variable="*HeadMT*"+
part="payload"/>
+</copy>+
+<copy>+
+<from expression="'TKL'"/>+
+<to query="/ns1:LOGIN_INFO/ns1:CHANNEL_ID" variable="*HeadMT*"+
part="payload"/>
+</copy>+
+</assign>+
The expected input by the web service is as below with the header information highlighted.
+<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://ws/webservices/RowWS/RowWS.wsdl">+
+*<soap:Header>*+
+*<ns1:LOGIN_INFO>*+
+*<ns1:USERNAME>tkl12</ns1:USERNAME>*+
+*<ns1:PASSWORD>tkl123</ns1:PASSWORD>*+
+*<ns1:CHANNEL_ID>TKL</ns1:CHANNEL_ID>*+
+*</ns1:LOGIN_INFO>*+
+*</soap:Header>*+
+<soap:Body>+
+<ns1:substatusElement>+
+<ns1:pInparam>+
+<ns1:insubno>7674988</ns1:insubno>+
+</ns1:pInparam>+
+</ns1:substatusElement>+
+</soap:Body>+
+</soap:Envelope>+

How to call Web Services (with javascript) in a view load event ?

Hello to the expert community,
I'm looking for a piece of javascript code allowing to call Web Services in a view load event ?
Any ideas will be really appreciated.
Regards.
Have a nice week.

Thank you for your answer, dongmei.
It seems that the MethodResultTableDataProvider does not return the response of the web service as a value field if the WSDL contains only one result element.
E.g. from WSDL of the USWeather Web Service which returns theGetWeatherReportResult string:
<?xml version="1.0" encoding="utf-8"?>
<wsdl:definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://www.webserviceX.NET" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" targetNamespace="http://www.webserviceX.NET" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
 <s:schema elementFormDefault="qualified" targetNamespace="http://www.webserviceX.NET">
 <s:element name="GetWeatherReport">
 <s:complexType>
 <s:sequence>
 <s:element minOccurs="0" maxOccurs="1" name="ZipCode" type="s:string" />
 </s:sequence>
 </s:complexType>
 </s:element>
 <s:element name="GetWeatherReportResponse">
 <s:complexType>
 <s:sequence>
 <s:element minOccurs="0" maxOccurs="1" name="GetWeatherReportResult" type="s:string" />
 </s:sequence>
 </s:complexType>
 </s:element>
 <s:element name="string" nillable="true" type="s:string" />
 </s:schema>If I drag the web service method on the page and I should be able to select the response value in the Bind to Data dialog box. But there is no value field. Value fields only occur if the web service returns more than one value.
The question is how can I get the response GetWeatherReportResult from the service.

Calling web service with basic authentication from EP "unauthorized"

Hello,
I need to call a .NET web service with basic authentication on the IIS from my portal application (no http proxy between portal and IIS). But always I get the following exception:
com.sap.engine. services.webservices.jaxm.soap.accessor. NestedSOAPException:
Problem in server response: [Unauthorized].
I'm using the following code for calling the .NET web service:
...Licence_GetList lParameter = new Licence_GetList();
lParameter.setStatus(CEnvironment.TransformStatus_WebService(search));
ILicenceManager lLicMan = (ILicenceManager) PortalRuntime.getRuntimeResources().getService("LicenceManager");
ILicenceManager lLicManSecure = lLicMan.getSecurisedServiceConnection(request.getUser());
Licence_GetListResponse lGetListResponse = lLicManSecure.Licence_GetList(lParameter);...
I've also configured a http system in the portal system landscape using the following parameters:
Authentication Method : Basic Authentication
Authentication Type : Server
User Mapping Type : admin,user
The user mapping is also personalized for this system!
What's wrong? Please help! This is really urgent!
Kind Regards
Joerg Loechner

Hello Renjith,
here is a small cutout of my "portapp.xml";
<services>
<service alias="LicenceManager" name="LicenceManager">
 <service-config>
 <property name="className" value="de.camelotidpro.
 pct.xi.scm.webservice.LicenceManager"/>
 <property name="startup" value="false"/>
 <property name="WebEnable" value="false"/>
 <property name="WebProxy" value="true"/>
 <property name="SecurityZone" value="de.camelotidpro.
 pct.xi.scm.webservice.LicenceManager/
 DefaultSecurity"/>
 </service-config>
 <service-profile>
 <property name="SystemAlias" value="LicMan_NET"/
 </service-profile>
</service>
</services>
I'm using a http system created in the system landscape (alias LicMan_NET). But it seems that this system is not used by the web service call (No error, even if I delete this system!). The code used to call this web service can be found at the top of this threat...
Regards
Joerg Loechner

Receiver HTTP Adapter Dynamic Query String

Hello,
I am using HTTP Adapter on receiver side.
My URL is http://server:port/abc/def?xyz=123&luw=345
When I am using Adapter specific attributes.
If I check apply Parameters and pass
Parameter 1 as xyz and Parameter 2 as luw and pass their values through dynamic configuration will they get appended to the dynamic querystring
http://server:port/abc/def at the end and I get back the complete URL.
Can this be achieved? I am stuck on this.
Regards,

Srihari,
The best way to debug this and check what is happening would be to use the TCP gateway tool as shown in this blog by Stefan Grube.
/people/stefan.grube/blog/2007/03/29/troubleshooting-soap-http-and-mail-adapter-scenarios-with-tcpgateway
Send the request to the TCP gateway and forward it from there to the correspionding target.
You will be able to see the URL being passed including the Query String parameters.
Regards
Bhavesh

Call http service extract value from person/group field

Hi
I have a list that has people or group field.
When Runing my WF I want to get in to a variable the members of the group that is in people or group field.
I would like to extract members from group using call http action.
How can i start?
which URL should i put in "Enter the HTTP service URL"?
pleas your help.

Hi,
You can use the following URL to extract the members from group
http://siteurl/_api/Web/SiteGroups/getbyname('groupname')/users
You can create a workflow variable and extract the value from the people or group field
Build the URL using as follows
[%Workflow Context:Current Site URL%]/_api/Web/SiteGroups/getbyname([%Variable: GroupName%])/Users
For more information how to use the Web Service in workflow use the following article.
http://blogs.msdn.com/b/sharepointdesigner/archive/2012/09/05/how-to-work-with-web-service-using-call-http-web-service-action.aspx
Please don't forget to mark it answered, if your problem resolved or helpful.

How to call https service from OSB

hi
I need to call thirt party https service. Its a secured service with authentication.
I have Imported ssl certificate in keystore.
It's one way ssl with authentication and I need to pass wsse token (username/password) from Business service to invoke third party service.
What steps do I need to follow to call this service?
I have gone through all other
Thanks
Vibhor

Below note gives the high level steps to be performed for implementing different security requirements with OSB
OSB - Proxy Service HTTPS one way
Configure Identity & Trust Keystore
OSB - Proxy Service HTTPS 2 way
Configure Identity Assertion Provider to support X509
Configure user mapper class for default identity assertion provider
Change 2 way Client Cert behaviour from default
('Client Certificate Not requested”) to “Client Certificate requested but not enforced”
OSB - Business Service HTTPS one way
Add root & intermediate CA certificates of the server to the trust keystore
OSB - Business Service HTTPS 2 way
Add root & intermediate CA certificates of the server to the trust keystore
Configure PKI Credential Provider containing the client certificate
Configure a Service Key provider with SSL Client Authentication key
Associate the service key provider to the proxy service which invokes the business service
OSB - Proxy Service WS-Security User Name Token
Configure Auth.xml or custom username token WS-Security Policy
OSB - Proxy Service WS-Security X509 Token
Configure Auth.xml and Sign.xml Policy
Change UseX509ForIdentity attribute in domain → WS Security → Inbound Mbean Token handlers Page to true
Ensure Certificate passed by client is present in certificate registry or the root CA in trust keystore depending upon weblogic certification path provider configuration
Configure Identity Assertion Provider and Username mapper class.
OSB - Business Service WS-Security User Name Token
Configure Auth or custom username token WS-Security Policy
Configure Service account for username provider
OSB - Business Service WS-Security X509 Token
Configure Sign.xml and Auth.xml policy ( or custom signing and username token policies) in the business service
Configure a PKI credential provider and service key provider containing the certificate to be used for signing and authentication
Associate the service key provider to the proxy service which invokes the business service.
*OSB - Proxy Service Digital Signature     [ Request Only]*
Configure Sign.xml or a custom signing policy to the proxy service
Ensure Certificate passed by client is present in certificate registry or the root CA in trust keystore depending upon weblogic certification path provider configuration
*OSB – Business Service Digital Signature     [ Request Only]*
Configure Sign.xml policy ( or custom signing policy) in the business service
Configure a PKI credential provider and service key provider containing the certificate to be used for signing
Associate the service key provider to the proxy service which invokes the business service.
Edited by: atheek1 on Aug 26, 2010 5:17 AM
Edited by: atheek1 on Aug 26, 2010 8:20 AM

Calling a method with a string

Here's the question:
I want to call a method with the name equal to a string variable.
For example, if the string variable contains "hellojava" , i'd like the hellojava() method to be called..
if the string contains "error", the error() method should be called..
and so on..:)

Here is an example I had thrown together for this
purpose of the exact demonstration, Ar'nt you in luck.:-). If there is anything you don't understand,
I can be reached at [email protected] and will be happy to help....
import java.lang.reflect.*;
import java.io.*;
class Test {
 String name = "Default";
 public Test(String name) {
 this.name = name;
 public void test() {
 System.out.println("Hello");
 public void count() {
 for(int i=0; i<10; i++) {
 System.out.println(i);
 public static void main(String[] args) {
 try {
 Test myObject = new Test("test1");
 Class myClass = myObject.getClass();
 BufferedReader bRead =
 new BufferedReader(
 new InputStreamReader( System.in ));
 String bufStr = null;
 while( (bufStr = bRead.readLine()) != "exit") {
 Method noParams = myClass.getDeclaredMethod(bufStr, new Class[] {});
 noParams.invoke(myObject, new Object[] {});
 }catch(Exception e) {
 System.out.println("No Such Method.");
}Good Luck,
-- Ian

FLVPlayback source with query strings (parameters) doesn't load

Flash version: CS4
AS version: AS3
I'm currently trying to use the FLVPlayback component and pass a source FLV that's living on a cloudfront webserver. The problem is that the cloudfront requires authentication in the form of query strings in the source FLV. For example:
import fl.video.*;
var mainMovie:FLVPlayback = new FLVPlayback();
mainMovie.source = "http://www.somedomainname.com/firmware.flv?dummyquery=22";
trace(addChild(mainMovie));
As soon as I take away the "dummyquery", it works fine. When I add a query string, it breaks (nothing loads).
Here is the error output I get:
[object FLVPlayback]
VideoError: 1005: Invalid xml: URL: "http://www.somedomainname.com/firmware.flv?dummyquery=22&FLVPlaybackVersion=2.1" No root node found; if url is for an flv it must have .flv extension and take no parameters
 at fl.video::SMILManager/http://www.adobe.com/2007/flash/flvplayback/internal::xmlLoadEventHandler()
 at flash.events::EventDispatcher/dispatchEventFunction()
 at flash.events::EventDispatcher/dispatchEvent()
 at flash.net::URLLoader/onComplete()
It adds on "&FLVPlaybackVersion=2.1" to the end.
I saw a different article that said I should add a dummy variable at the end like "&dummy=.flv" because I was told that Flash is basically looking for an .flv extension at the end and you can trick it, but it doesn't work because they add on additional code.
Does anyone know how to work around this?

Hey supervu,
I know you already found a workaround to make this work, just figured I'd post an alternative to editing the FLVPlayback compoent. I also am retrieving an FLV file via a .Net ASHX file. To keep both worlds happy, I used a URLRewriter module to translate for me... this one translates what I am using for the FLVPlayback component source:
http://domain.com/flv/22.flv to be resolved as http://domain.com/API/resource.ashx?ID=22
There is of course no flv folder in the root of my application...
Here is my very simple URLRewriter class in vb.net:
Imports Microsoft.VisualBasic
Imports System
Imports System.Web
Public Class URLRewriter
 Implements IHttpModule
 Public Sub Init(ByVal inst As System.Web.HttpApplication) Implements System.Web.IHttpModule.Init
 AddHandler inst.BeginRequest, AddressOf Me.OnBeginRequest
 End Sub
 Public Sub OnBeginRequest(ByVal app As Object, ByVal e As EventArgs)
 Dim inst As HttpApplication = CType(app, HttpApplication)
 Dim req_path As String = inst.Context.Request.Path
 Dim trans_path As String = ""
 Dim search As String = "/flv/"
 Dim pos As Integer = req_path.IndexOf("/flv/")
 If pos > -1 Then
 Dim key as string = req_path.Substring(pos + search.Length, (req_path.LastIndexOf(".flv") - (pos + search.Length)))
 HttpContext.Current.Response.Redirect("~/API/resource.ashx?ID=" & key )
 End If
 End Sub
 Public Sub Dispose() Implements System.Web.IHttpModule.Dispose
 End Sub
End Class
and make sure you add this to your web.config.. this will cause URLRewriter to intercept all HTTP requests, and redirect as needed.
<system.web>
 <httpModules>
 <add name="URLRewriter" type="[Namespace].URLRewriter"/>
 </httpModules>
</system.web>
Hope this helps someone.

Having problems creating PDF from website with query-string URLs

I have a website that I would like to create a PDF from. I am using the Create -> PDF from Web Page..., selecting the site's home page, and capturing 2 levels, with "stay on same path" and "stay on same server" checked in order to limit the scope of the crawl.
Where the pages are at example.com/foo/ and example.com/foo/bar/, this works fine. However, where the pages are at example.com/foo/ and example.com/foo/?p=1, the page represented by the query string URL is not converted to the PDF.
This is a problem, given that the site I want to archive as a PDF uses query strings for most of its pages.
I have been able to individually convert a single query-string-based page into a PDF using this method, but doing this for every page on the site would be almost impossible given the sheer number of pages on the site.
Is this a known issue? Is there a workaround other than separately capturing each page (which would be prohibitive effort)?
I have tried this in both Acrobat Pro X and Acrobat Pro 9 for Mac, with the same results.

Remember, Acrobat is a 32-bit application and as such cannot access all that 'extra' stuff.
Be well...

Using HTTP Services with SSL using Internet Explorer

Hello,
Basically what's happening is that the secure services aren't
loading when I pull up the website when using Internet Explorer.
The website works perfect in FireFox and Safari however nothing
loads via the HTTP services when they use SSL. I've read over Lin
Lin's article
http://weblogs.macromedia.com/lin/archives/flex/security/index.cfm
about using SSL with IE however I'm confused as how to implement
the changes she mentions. She basically mentions a couple of the
reasons why the httpServices wouldn't be able to load data in when
connecting via SSL. I've read over the Adobe TechNote at
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fdc7b5c&pss=rss_flashplayer_fdc7b5 c
but this wasn't clear either.
1. How do I change the server settings to have the correct
header information?
2. Can I change something in the Flex Compiler to allow for
SSL and IE?
This works perfect in FireFox and Safari and retrieves data
with no problems. Any ideas, information would be appreciated.

Hello,
Basically what's happening is that the secure services aren't
loading when I pull up the website when using Internet Explorer.
The website works perfect in FireFox and Safari however nothing
loads via the HTTP services when they use SSL. I've read over Lin
Lin's article
http://weblogs.macromedia.com/lin/archives/flex/security/index.cfm
about using SSL with IE however I'm confused as how to implement
the changes she mentions. She basically mentions a couple of the
reasons why the httpServices wouldn't be able to load data in when
connecting via SSL. I've read over the Adobe TechNote at
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fdc7b5c&pss=rss_flashplayer_fdc7b5 c
but this wasn't clear either.
1. How do I change the server settings to have the correct
header information?
2. Can I change something in the Flex Compiler to allow for
SSL and IE?
This works perfect in FireFox and Safari and retrieves data
with no problems. Any ideas, information would be appreciated.

Calling HTTP Service with Query string in Orchestration

Similar Messages

Maybe you are looking for