Calling PCUI call list mgt screen from ICWC

Hi,
My business requirement is to have visibility on the status of the call lists in ICWC. 
This cannot be done using standard ICWC screens, so I'm looking to PCUI application CRMD_CLMANAGEMENT to get it done.
So I created the transaction launcher class with the wizard.  As transaction parameter I enetered the call list ID.  The purpose is to have the selected call list opened when the PCUI screen is opened. 
However, seem to be facing issues passing over the correct parameters.
When I select a call list and open the PCUI tx, I get the message:  Execution not possible; data flow errors
When I select a bp and open the PCUI tx, the screen opens but there is no call list selected - you can't even search for it.  The only possible feature is the ability to (start to) create a call list.  (but PCUI could not complete this action either).
My questions are as follows:
what parameters do I need to pass over to CRMD_CLMANAGEMENT in PCUI?
How do I pass over these parameters?  Can it be done via the wizard or do I need to do it via additional programming?
How can I get the search function working on the PCUI screen?
Best regards,
Carl

Hi Thirumala,
Thx for you input, but this does not really tackle the problem.  The suggested line of coding only helps if you don't need to pass any compulsory parameters to the PCUI application.
I want the PCUI application to open the call list that was selected in ICWC, or at least a list of call lists that are active for the user.  The goal is the end user being able to have some kind of call list mgt transaction.
Best regards,
Carl

Similar Messages

  • Can we call a selection screen from List output

    Hi Folks,
    Can we call a selection screen from the list output?
    I mean for ex:-
    i am getting the data from MAKT and displaying it in the list output having a button EMAIL.
    When I press that button it should call a selection screen asking the user to enter EMAIL id .
    Thanks,
    K.Kiran.

    Hi
    U can create a dynpro as SELECTION SCREEN and call it using CALL SELECTION-SCREEN statament:
    SELECTION-SCREEN BEGIN OF SCREEN 100.
    PARAMETERS: P_MAIL(80) TYPE C.
    SELECTION-SCREEN END    OF SCREEN  100.
    AT USER-COMMAND.
       CASE SY-UCOMM.
          WHEN 'MAIL'.
              CALL SELECTION-SCREEN 100.
              IF SY-SUBRC = 0. "User press F8
              ELSE.
                " User press exit or back
              ENDIF.
    U can use the addition STARTING AT ..... ENDING AT ..... if you need to show the selection-screen as popup
    Max

  • How to call a sub screen from abap report

    Hellow friends,
    how to call sub screen 1001 prog name SAPLMGD1
    and main program SAPLMGMM screen 4000 of tcode MM02.
    i need to call the sub screen from abap report

    Hi Rajesh,
    You can use FM MATERIAL_MAINTAIN_DIALOGUE to go to subcreen MRP1 in MM02.
    Please check this sample code from other thread and enter 'MRP 1' for p_dytxt.
    REPORT zsritest.
    TABLES mara.
    DATA: lv_bilds LIKE t133a-bilds,
    ls_t130m LIKE t130m,
    ls_rmmg1 LIKE rmmg1,
    lwa_view TYPE mbildtab,
    lwa_auswg TYPE mgauswg,
    lt_views TYPE STANDARD TABLE OF mbildtab INITIAL SIZE 0,
    lt_auswg TYPE STANDARD TABLE OF mgauswg INITIAL SIZE 0.
    PARAMETERS: p_matnr LIKE mara-matnr,
    p_werks LIKE marc-werks,
    p_dytxt LIKE mbildtab-dytxt.
    SELECT SINGLE * FROM mara WHERE matnr EQ p_matnr.
    CHECK sy-subrc EQ 0.
    CALL FUNCTION 'T130M_SINGLE_READ'
    EXPORTING
    tcode = 'MM02'
    kzrfb = 'X'
    IMPORTING
    wt130m = ls_t130m
    EXCEPTIONS
    not_found = 1
    wrong_call = 2
    OTHERS = 3.
    CALL FUNCTION 'BILDSEQUENZ_IDENTIFY'
    EXPORTING
    branche = mara-mbrsh
    materialart = mara-mtart
    tcode_ref = ls_t130m-trref
    * KZRFB = ' '
    IMPORTING
    bildsequenz = lv_bilds
    * KZ_BILDS_CHANGED =
    EXCEPTIONS
    wrong_call = 1
    not_found = 2
    OTHERS = 3.
    CALL FUNCTION 'SELECTION_VIEWS_FIND'
    EXPORTING
    bildsequenz = lv_bilds
    pflegestatus = mara-pstat
    TABLES
    bildtab = lt_views[]
    EXCEPTIONS
    call_wrong = 1
    empty_selection = 2
    OTHERS = 3.
    ls_rmmg1-matnr = mara-matnr.
    ls_rmmg1-werks = p_werks.
    READ TABLE lt_views INTO lwa_view WITH KEY dytxt = p_dytxt.
    CHECK sy-subrc EQ 0.
    lwa_auswg-auswg = lwa_view-auswg.
    APPEND lwa_auswg TO lt_auswg.
    CALL FUNCTION 'MATERIAL_MAINTAIN_DIALOGUE'
    EXPORTING
    irmmg1 = ls_rmmg1
    * IRMMG1_REF = ' '
    KZ_EIN_DARK = 'X'
    t_tcode = 'MM02'
    * FLG_MATNR_RES = ' '
    p_pstat = mara-pstat
    * FLG_STAT_ALL = ' '
    * CALL_MODE2 = ' '
    * IMPORTING
    * MATERIAL_NO =
    * UPDATE_OK =
    TABLES
    iauswg = lt_auswg[]
    EXCEPTIONS
    no_authority = 1
    OTHERS = 2.
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards,
    Ferry Lianto

  • Calling a Selection Screen from a Function Module/Method

    Hi,
      I would like to call a selection screen from a function module or method. I understand it is not possible by the definition. Are there any alternative options as I am looking for the Variants Save option on the screen. Any thoughts?
    Thanks
    Raghav

    Since i don't know your exact requirements (standard SAP selection screen? your own selection screen?) the onl;y thing i can come up with is:
    1. in your function pool create your own screen with a subscreen area
    2. create your own selection screen as a subscreen.
    3. include the selection subscreen in the first screen
    4. call the first screen in your function.

  • Call Web Dyn Pro from ICWC on Button event

    Hi ,
    How to call web dynpro application from ICWC (CRM 5.0) ?
    In the srvTHead View a new button is provided and on click even the web dynpro application should be called.
    I tried calling the web page using function module CALL_BROWSER and cl_gui_frontend_services=>execute.
    is there any other way to call the web dynPro from ICWC.
    Thanks in advance.
    Regards,
    Prasad

    Stride,
    Try doing a rebuild on your project and if that fails too the check the project/zip file you downladed from SDN. t should have the external jar file.
    Also BTW which tutorial are you refering?
    Chintan

  • Calling custom dialog screen from Standard Transaction(user Exit)

    Hi, I'm calling Standard Transaction from a Custom Screen. I'm calling a custom screen again with in standard transaction (implemented custom screen thru user exits using macros). But when I click 'continue/cancel' in the custom screen, control is going back to main cutom screen rather go back to standard transaction. Could anyone please help me out how to come back to standard transaction from custom screen rather going back to main cutom screen.
    ***INCLUDE LZ_R_FORWARD_FORWARD_LOADI01 .
    *&      Module  USER_COMMAND_9000  INPUT
    MODULE user_command_9000 INPUT.
      CASE sy-ucomm.
        WHEN 'EXEC'.
          PERFORM validate_popup_data.
          IF flag_error_screen NE 'X'.
            MOVE-CORRESPONDING ZFFL_POPUP to var_ZFFL_POPUP.
            clear flag_return.
            SET SCREEN 0.
            LEAVE SCREEN.
          ENDIF.
        WHEN 'CANC'.
          flag_return = 'X'.
          SET SCREEN 0.
          LEAVE SCREEN.
        WHEN OTHERS.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_9000  INPUT
    *&      Module  exit_9000  INPUT
    MODULE exit_9000 INPUT.
      CASE sy-ucomm.
        WHEN 'CANC'.
    *      MOVE perf_flag TO lbpla_exist_flag.
          flag_return = 'X'.
          SET SCREEN 0.
          LEAVE SCREEN.
      ENDCASE.
    ENDMODULE.                 " exit_9000  INPUT
    Thanks in advance.

    Hi
    So the command SET SCREEN 0. LEAVE SCREEN. should "place" the program just after the calling of the popup so here:
    FUNCTION z_call_screen.
    * Call the Pop up screen
        CALL SCREEN 9000 STARTING AT 35 05.
    "<------------------------- The program should be here after going back from popup 9000
    ENDFUNCTION.
    Is it true?
    Max

  • Call module pool screen from ABAP Webdynpro

    Hi All
    I designed one screen in normal classical dynpro in SE80 for module pool program. I want to call that screen layout design in webdynpro view layout.
    So please help me how can i call that module pool screen from my ABAP webdynpro 

    Hi
    Thank you for your great replay. But Mr Ramakrishnappa and Mr Katrice as your reference i go through that but when i insert the program name and screen number program is end with a run time error saying
    dynamic type conflict when assigning reference.
    Please refer the below snap shot

  • How to call  web ui screen from bsp componants

    Hi Gurus,
                I am trying to call the web ui screen from bsp componants by using the function modules .but exception is coming. but from gui these functionmodules are opening the web ui screen.those function modules are BAPI_BUSPROCESSND_CHANGEDIALOG,CRM_1O_CALL_WEBUI here only we need to pass the GUID. but these are not working from bsp componants .i am not getting why these are not working if there is any solution Please give me suggestion.Its very needful.
    Regards,
    Bixamaiah.

    Hi Caíque Escaler,
             the requirement is workflow is triggered in web client.In the webscreen from the workflow task user selects the work item then one screen will come from there  if the user selects the reject option then immidiately  we need to open that order in web screen.that is the requirement.
    Regards,
    Bixamaiah.

  • Calling a WDA screen from SC

    Gurus,
    I need to provide a pop up to the user when the buyer adds certain part numbers to his shopping cart. In that pop up the buyer would be entering some information related to that part and that information needs to go in as item text.
    I have a WDA screen to call and really struck not knowing how and where to call this WDA screen. Any help in this direction would be appreciated.
    Thanks
    Sridhar

    Hi,
    I had similar requirement and implement it with DOC_CHECK_BADI and vendor text.
    The requirement was if item is for specific category, requester should add some information in vendor text.
    Regards,
    Masa

  • How to call dynamic selection screen from another report

    hi,
    i have transaction ZFAGLL03.
    it has got standard selection screen.. and dynamic selection screen...
    i am calling this transaction from another report, now how do i display this dynamic selection screen.....

    Try following code and see if it helps:
    TYPE-POOLS : rsds.
    TABLES:tgsb.
    DATA: trange TYPE rsds_trange,
           trange_line
             LIKE LINE OF trange,
           trange_frange_t_line
             LIKE LINE OF trange_line-frange_t,
           trange_frange_t_selopt_t_line
             LIKE LINE OF trange_frange_t_line-selopt_t,
              trange_line1
             LIKE LINE OF trange,
           trange_frange_t_line1
             LIKE LINE OF trange_line-frange_t,
           trange_frange_t_selopt_t_line1
             LIKE LINE OF trange_frange_t_line-selopt_t,
           texpr TYPE rsds_texpr.
    DATA: seltab TYPE TABLE OF rsparams WITH HEADER LINE,seltex TYPE rsds_texpr.
    SELECT-OPTIONS:so_gsber FOR tgsb-gsber.
    LOOP AT so_gsber.
       trange_line-tablename = 'FAGLFLEXA_FS'.
       trange_frange_t_line-fieldname = 'RBUSA'.
       MOVE-CORRESPONDING so_gsber TO trange_frange_t_selopt_t_line.
       APPEND trange_frange_t_selopt_t_line
       TO trange_frange_t_line-selopt_t.
    ENDLOOP.
    APPEND trange_frange_t_line TO trange_line-frange_t.
    APPEND trange_line TO trange.
    CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
       EXPORTING
         field_ranges = trange
       IMPORTING
         expressions  = texpr.
    submit FAGL_ACCOUNT_ITEMS_GL with FREE SELECTIONS texpr   AND RETURN .

  • Calling WebDynpro input screen from within an abap Function module / user

    Hi,
    I am posting SAP data with a BAPI from an Web Dynpro Application.
    In the Bapi I must use an BADI/User -EXIT to add some infornation.
    Today this is done by calling an Dynpro in a function module. This creates a pop up, data is filled and posted on commit.
    How can I get a Web Dynpro application to display this popup without showing the "call screen without connection " error ?
    Thanks for any help.
    Marcus

    >
    Deok-Byung Lim wrote:
    > Here is an unofficial way to get current WD component.
    > (WDR_TASK class is not for customer)
    >
    >   DATA lo_wdr_component TYPE REF TO cl_wdr_component.
    >   lo_wdr_component = wdr_task=>application->component.
    >
    >
    > then.. attach component usage and popup your WD screen
    >
    > BUT IT'S NOT OFFICIAL!!
    This approach is absolutely NOT supported nor recommended by SAP.

  • Reg: calling selection screen from the second list

    Hi all,
    How can we call the selection screen from the second screen.
    Can any one help me to solve this problem.

    HI RJ,
    Try .....
    case sy-ucomm.
    WHEN '&F03'.
    LEAVE TO SCREEN '0'.
    endcase.
    after the FM for grid-display
    i m using the same .....
    i hav selection-screen..then alv grid screen 1  then again another screen with alv grid display..
    bt in my code for first alv grid ...i m using REUSE_ALV_GRID_DISPLAY_LVC
    as
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
          EXPORTING
            i_callback_program       = sy-repid
            i_callback_pf_status_set = 'SET_PF_STATUS'(303)
            i_callback_user_command  = 'USER_COMMAND'(304)
            i_grid_title             = 'Reconcilation Report'(305)
            is_layout_lvc            = it_layout
            it_fieldcat_lvc          = gt_fieldcat3[]
          TABLES
            t_outtab                 = gt_msg[].
    here i musing set_pf_status to add one pushbutton to the screen. in ur case u can avoid that...
    after that
    *&      Form  set_pf_status
          text
         -->EXTAB      text
    FORM set_pf_status USING extab TYPE slis_t_extab.           "#EC NEEDED
      SET PF-STATUS 'STANDARD_FULLSCREEN'.
    *get back to Selection Screen
      case sy-ucomm.
        WHEN '&F03'(328).
          LEAVE TO SCREEN '0'.
      endcase.
    ENDFORM.                    "set_pf_status
    its working for me..
    Thnx
    Rohit...
    Edited by: Rohit Kumar on Oct 29, 2008 3:20 PM

  • Calling Java screens from Oracle Forms application

    I am working with a client that has a large Oracle forms application. Since rewriting the entire application in Java is not an option at this time, the strategic direction is that any new modules that are to be created for the application are to be done in Java and called from the Forms menu. The decision as to what tool to use to develop the Java modules is still under debate. What is the best (most seamless) way to do this...calling a Java screen from a Forms application? If anyone has any experience in this, or can direct me to some literature on it, it would be greatly appreciated. Thanks.

    This is a web app in Forms/Reports 10g R2 running off Oracle AS and an Oracle db. The challenge for us is that the direction is that any new enhancements (screens) are to be built using Java (in either ADF Faces or Swing, another point for debate later) and then called from the Forms app. The business client is only paying for the enhancement. They don't care about moving off Forms to Java, so any extra work on the part of IT to do this, has to be fairly minimal and doable within the project budget. The movement to Java is an IT direction. Is there a way to do this without having to build a java framework for the entire Forms application (which I assume would take some time and involve retesting the entire app)?

  • How to call custom screen from User exit?

    Hai,
    I have to call a custom screen from user exit include after the delivery save.
    Depends on the data in the delivery,
    if the data satisfies certain conditions I will call the screen otherwise no.
    Could any one please tell me how to do this?where to create screen & how to link it here?
    Regards,
    Bhaskar.

    Hi,
    Please check with the following Enhancements -
    V50PSTAT  - Delivery: Item Status Calculation 
    V50Q0001   - Delivery Monitor: User Exits for Filling Display Fields
    Rewards if it helps
    Regard
    Goutham

  • How to display Call list Large view as the initial view dynamically.

    My requiremet is that 
    1) User chooses a call list -> then clicks display calls -> then clicks Calls Full view
    Now ClmCallListDetailsLarge View is displayed
    2) Now the user chooses a call and then prceeds to Account confirmation, Interaction Record and then ends the call.
    3) Now when the Call list is choosen from navigation bar Available 'ClmAvailbleCallLists' View is displayed, but the requirement is to display 'ClmCallListDetailsLarge' view.
    4) There is some standard code related to this in 'DO_REPLACE_INITIAL_VIEW' method of the window controller. but this method is not getting triggered at all.
    Please let me know how this can be achieved

    Thanks for idea.
    Assume I stored my data in a List of HashMap.
    Could you provide an example of JSTL for displaying this list?

Maybe you are looking for