Calling Syn proxy inside the proxy
Dear Friends,
1.) Can we call a synchronous proxy inside the asynchronous proxy. if yes tell, how this can be handled.
2.) Consider my sender JDBC is synchronous and it has the polling interval is 30 sec. If in case if the time crossed the 30 sec but still the response didnt come, in this case will my channel wait with out polling or it polles b4 the response comes.
Thanks
Prem
Hi Prem,
For every request in synchronous communication there should be corresponding response from the receiver, if for any reason receiver doesnt respond there will not be any further message processing.
Go throgh the following link
JDBC to Synchronous ABAP Proxy
Regards
Sridhar Goli
Similar Messages
-
Getting Bad Type Error when calling a method in the proxy class
Hi,
I have generated the proxy classes from wsdl.
When I am calling the methods in the proxy class from one of external class, I am getting following error.
Can anyone please help me in resolving this issue.
javax.xml.ws.soap.SOAPFaultException: org.xml.sax.SAXException: Bad types (interface javax.xml.soap.SOAPElement -> class com.intraware.snetmgr.webservice.data.SubscribeNetObjectReference) Message being parsed:
at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:197)
at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:122)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:125)
at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
at $Proxy176.find(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
at $Proxy173.find(Unknown Source)
at com.xxx.fs.FNServices.findAccountWs(FNServices.java:132)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:268)
at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:403)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:532)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:253)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:140)
at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:171)
at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:708)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.wsee.util.ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)
at weblogic.wsee.jaxws.HttpServletAdapter$3.run(HttpServletAdapter.java:311)
at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:336)
at weblogic.wsee.jaxws.JAXWSServlet.doRequest(JAXWSServlet.java:95)
at weblogic.servlet.http.AbstractAsyncServlet.service(AbstractAsyncServlet.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Thanks
AnoopHi Vlad,
The service has not been changed since i have generated the proxy.
I tried calling the service from soapUI and I am getting the following error now.
Request:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:uri="uri:webservice.subscribenet.intraware.com" xmlns:uri1="uri:subscribenet.intraware.com">
<soapenv:Header>
<uri:SessionHeader>
<uri:SessionID>hjkashd9sd90809dskjkds090dsj</uri:SessionID>
</uri:SessionHeader>
</soapenv:Header>
<soapenv:Body>
<uri:Find>
<uri:SubscribeNetObjectReference>
<uri1:ID></uri1:ID>
<uri1:IntrawareID></uri1:IntrawareID>
<uri1:SharePartnerID></uri1:SharePartnerID>
</uri:SubscribeNetObjectReference>
</uri:Find>
</soapenv:Body>
</soapenv:Envelope>
Response:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Header/>
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server.generalException</faultcode>
<faultstring>org.xml.sax.SAXException: WSWS3279E: Error: Unable to create JavaBean of type com.intraware.snetmgr.webservice.data.SubscribeNetObjectReference. Missing default constructor? Error was: java.lang.InstantiationException: com.intraware.snetmgr.webservice.data.SubscribeNetObjectReference. Message being parsed:</faultstring>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
Thanks
Anoop -
Send data via PI to a proxy inside the same PI system?
Hi,
I want to transfer data send to PI to several other applications and in addition to the same PI system. Therefor I thought PI proxy technology would be the best but. When I send the data to the PI proxy I will get an infinity loop.
So I want to do the same what is possible with IDOC scenarios. I found an article telling me that I need to set up a different client inside the PI system and configure this client as Application System and not as PI inside sxmb_adm.
But this does not work and I never found this article again.
Any ideas?
BR Markus>
Jan-Markus Wilhelm wrote:
> Hi,
> I want to transfer data send to PI to several other applications and in addition to the same PI system. Therefor I thought PI proxy technology would be the best but. When I send the data to the PI proxy I will get an infinity loop.
>
> So I want to do the same what is possible with IDOC scenarios. I found an article telling me that I need to set up a different client inside the PI system and configure this client as Application System and not as PI inside sxmb_adm.
> But this does not work and I never found this article again.
>
> Any ideas?
>
> BR Markus
the only way, yes is to have a different client which is configured as the application system.
if you look into this blog it shows two different client of the XI system interacting with each other...
yours will be similar /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy -
Proxy Problem The proxy server is refusing connections
I run Windows XP. I did have a Cybot backdoor Activity attack intercepted by Norton Internet Security and I used the Norton NPE to remove it from the computer. I do not know if this caused the proxy problem or not.
There is no proxy problem connecting to the internet through Internet Explorer just through Mozilla Firefox.
When Mozilla Firefox tries to connect to the internet I get the following message:
Firefox is configured to use a proxy server that is refusing connections.
Check the proxy settings to make sure that they are correct.
Contact your network administrator to make sure the proxy server is
working.
In Mozilla I click Tools, options, advanced, network, settings. Under settings Proxy is set on manual, it says that there is no proxy for the figures typed in.
So I click auto detect proxy and I then can connect to internet through Mozilla, however when I log out of the internet, the same proxy server issue is recreated.
What should the Proxy setting be?You can find the connection settings in Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Preferences_not_saved -
How can we call windows application inside the bsp ...
hi,
i just want to call the exe file or execute or open outlook express inside a page...
or.. openeing a notepad..
thanks
jaideepCheck this thread..
Call a Systemcommand from BSP
how to call DLL in BSP
<i>*Reward each useful answer</i>
Raja T -
Can we call a transaction inside the same transaction?
Hi all
in my csae am facing this tricky situtation to do call the same transaction for bdc purpose would you please assist me can we do that either by calling it in any exits or by using any function modules ?What exactly are you trying to do? Why not:
loop at i_detail.
your bdc code goes here ****
perform bdc_transaction using xxxx.
endloop. -
This problem only happens with one website when I try to follow hyperlinks to other pages. They have directed me to Firefox troubleshooting section. I have followed the advice there but it has not solved my problem.
I haven't been able to go on line since 7.01 and up. I have to use ieexplorer. are you idiots or what. I can't even contact you because i have to be in your latest version but i can't get the internet with the latest version. good bye for good
-
Problem in JNDI Lookup of Deployable Proxy inside logon.par
Hi,
I have customized the Logon par file and have a functionality to call a webservice when the Password Reset happens.
<b>from the ResetPassword.jsp , SAPMLogonLogic.java is getting called ,and there is a method called performResetPassword().</b>
I am calling a Deployable Proxy in that method by using the below code,
<b>Gateway objGateway=(SMSGateway)ctx.lookup("java:comp/env/MailProxy");
MailGatewayViDocument objSMSGatewayViDocument=(MailGatewayViDocument )objGateway.getLogicalPort("wsPort_Document",MailGatewayViDocument.class);</b>
objMailGatewayViDocument.sendMail(...);
I am getting the Exception,
<b>com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at java:comp, the whole lookup name is java:comp/env/MailProxy.</b>
I have deployed the Deployable Proxy in the J2EE Engine and add this API Jar as the External Library (Project >Properties>Java Build Path ---> Add External jars...Added the .jar file generated in the Proxy Project).
Please let me know the possible solutions where i can call a deployable proxy inside the logon par file.
Thanks and Regards,
SekarHi Sekar!
Try this:
MailGateway objMailGateway=(MailGateway)ctx.lookup
("wsclients/proxies/sap.com/MailProxy/com.ms.sap.sms.MailProxy/wsPort_Document");
I have understood you're deploying a par file... if you are doing this way, don't forget to put a reference to the webservice in portalApp.xml:
<property name="PrivateSharingReference" value="SAPJ2EE::sap.com/com.ms.sap.sms.MailProxy"/>
Hope this can work.
Are you sure this destination is the one you are looking for?
sap.com/CHEPSMSProxy/com.ms.sap.sms.SMSProxy/wsPort_Document
It seems to be anther app. If this is the correct app then the JNDI should be:
MailGateway objMailGateway=(MailGateway)ctx.lookup
("wsclients/proxies/sap.com/CHEPSMSProxy/com.ms.sap.sms.SMSProxy/wsPort_Document");
If this fails and if you have have source code of the proxy app, check out the application.xml file, and look for Display name. Also look for the application-j2ee-engine.xml file, and look for the 'Vendor name', and post them please.
Eneko
Message was edited by:
Eneko Rodriguez -
Problem in JNDI Lookup of Deployable Proxy from the logon par file
Hi,
I have customized the Logon par file and have a functionality to call a webservice when the Password Reset happens.
<b>from the ResetPassword.jsp , SAPMLogonLogic.java is getting called ,and there is a method called performResetPassword().</b>
I am calling a Deployable Proxy in that method by using the below code,
<b>Gateway objGateway=(SMSGateway)ctx.lookup("java:comp/env/MailProxy");
MailGatewayViDocument objSMSGatewayViDocument=(MailGatewayViDocument )objGateway.getLogicalPort("wsPort_Document",MailGatewayViDocument.class);
objMailGatewayViDocument.sendMail(...);</b>
I am getting the Exception,
<b>com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at java:comp, the whole lookup name is java:comp/env/MailProxy.</b>
I have deployed the Deployable Proxy in the J2EE Engine and add this API Jar as the External Library (Project >Properties>Java Build Path ---> Add External jars...Added the .jar file generated in the Proxy Project).
<b>Please let me know the possible solutions where i can call a deployable proxy inside the logon par file</b>.
Thanks and Regards,
SekarHi,
I have fixed this error by changing the lookup as follows.
InitialContext ctx=new InitialContext();
Gateway objGateway=(Gateway)ctx.lookup("wsclients/proxies/sap.com/GatewayProxy/com.ms.sap..GatewayProxy");
Just open Visual Administrator and look for the path under wsclients for proper naming.
Thanks and Regards,
Sekar
Edited by: Sekar M on Jan 16, 2008 6:10 PM -
Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be. -
Not enough disk space available on the proxy
Wondering if someone might be able to shed some light here.
Trying to deploy a 16GB flar image, but it fails claiming there is not enough disk space on the proxy, however the proxy appears to have plenty of space in /var:
The error:
Task : Download Image
Task Run ID : 23076
Target : PC->ocproxy-6c657073
Status : FAILED
Result : Failed to download image + combo-S10-v149.flar
Logs :
05/01/2015 01:47:15 PM PDT INFO Task is posted to the Proxy Controller (ocproxy-6c657073), from the Enterprise Controller. (15011)
05/01/2015 01:47:18 PM PDT INFO Task is received by the Proxy Controller. (15012)
05/01/2015 01:47:18 PM PDT INFO ---enter into image task run----
05/01/2015 01:47:18 PM PDT INFO download image combo-S10-v149.flar:osFlarImage:,jsPostInstall.sh:osScript:,osp_status_firstboot.sh:osScript:,
05/01/2015 01:47:53 PM PDT ERROR Not enough disk space available on the proxy to download the file - /var/opt/sun/xvm/proxyImageCache/os/flars/combo-S10-v149.flar.
05/01/2015 01:47:53 PM PDT ERROR Image file does not exist - combo-S10-v149.flar.
05/01/2015 01:47:53 PM PDT ERROR Failed to download the url - /ImageDownload/FileDownload?fileName=/os/flars/combo-S10-v149.flar.
05/01/2015 01:47:53 PM PDT ERROR Failed to download image + combo-S10-v149.flar
root@ocproxy:/# df -h
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-1 98G 3.3G 68G 5% /
/devices 0K 0K 0K 0% /devices
/dev 0K 0K 0K 0% /dev
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 5.5G 1.7M 5.5G 1% /system/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/usr/lib/libc/libc_hwcap1.so.1
71G 3.3G 68G 5% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
rpool/ROOT/solaris-1/var
98G 13G 68G 17% /var
swap 5.5G 96K 5.5G 1% /tmp
rpool/VARSHARE 98G 2.6M 68G 1% /var/share
rpool/export 98G 35K 68G 1% /export
rpool/export/home 98G 45K 68G 1% /export/home
Any ideas?
-JDid you format your new drive to MAC OS Extended?
Al -
The proxy server could not handle the request
i am trying to download a transcript from the IRS website and i get this error
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request POST /icce-core/load/gettrans/pages/availableTranscripts.xhtml.
Reason: Error reading from remote serverAre you using a proxy? Check you settings.<BR><BR>
===============================================
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you. -
How to confirm the Proxying happened?
Understanding Proxying and Redirection
http://technet.microsoft.com/en-us/library/bb310763(v=exchg.141).aspx
from the above article, we know if a Redirection happened, a new URL would be displayed on the login page, and so we can confirm a
Redirection happened.
So how about Proxying ,as the "Proxying isn't visible to the user.", so how can we confirm a Proxying happened?
It there any way/log to monitor the Proxying happened?
Please click the Mark as Answer button if a post solves your problem!to your specific question of how can we confirm.
get the user to login to owa
Step 1
Go to the Outlook Web Access website and log in with your user account.
Step 2
Click "Options" under the upper right-hand corner of the page.
Step 3
Click "About" on the lower part of the left window pane.
Step 4
Find the line "Client access server name."
This will be the cas server you are using and should be the one you want to be proxying to the remote site -
How to config the proxy of Bpel process manager(with password)
HI, i met the quetion as below
The The Oracle BPEL Process Designer & Manager server is installed on my computer in domin of my company, so if One of the BPEL processes deployed on the BPEL server needs to access a synchronous Web service hosted outside the firewall .i need to config the proxy, but the proxy of my company needs my ID and password to access outside . after I congfig the proxy
option of designer and build the Process, there will be pop-up a dialog box and ask for my ID & password .But how i config the proxy of Bpel process manager?? I read the tecnote about HTTP Proxy Configuration and config the proxy in the obsetenv.bat ,but it seems has no information about my ID&password in obsetenv.bat.
The question is How can i let the Bpel process manager know my proxy and ID&password ?? pls help me ,thx!I have set these value in obsetenv.bat as follows, and I restart the Bpel manager server and designer.
but the same issue still occur:
set OB_JAVA_PROPERTIES="-Djavax.wsdl.factory.WSDLFactory=oracle.j2ee.ws.wsdl.factory.WSDLFactoryImpl" "-Dhttp.proxySet=true" "-Dhttp.proxyHost=pxysha" "-Dhttp.proxyPort=8080" "-Dhttp.proxyUser=oocldm\hanfi" "-Dhttp.proxyPassword=123456" "-Dhttp.nonProxyHosts=localhost".
At the same time, I have set proxy server in bpel designer of eclipse, after I build the process,it can works well(which display BUILD SUCCESSFUL), but the bpel server display error message as below :
Exception Name:
Failed to read wsdl
Exception Description:
Error happened when reading wsdl at "C:\orabpel\domains\default\tmp\.bpel_TerraFlow_1.0.jar\TerraServiceRef.wsdl", because "WSDLException: faultCode=PARSER_ERROR: Error reading file: Server returned HTTP response code: 407 for URL: http://terraserver.microsoft.com/TerraService.asmx?WSDL".
what happen ? -
Outbound proxy in Inbound proxy
Hi Experts,
I am doing two way interface. JDBC asyn - proxy-JDBC asyn
I am calling outbound proxy in inbound proxy here.
While i am calling it is giving HTTP connection error.
So can i call outbound proxy in inbound proxy ????
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>Outbound proxy inside inbound proxy scenario usually works fine. But few suggestions,
1. Check if the message is failing in request side of asynchronous scenario. If this is the case then I think the error which you are getting is probably due to improper channel configuration.
2. If problem is not the one mentioned in point 1 above then, test the proxy in transaction SPROXY of ECC as to whether outbound proxy is called while inbound proxy is executed manually in transaction SPROXY . Once you execute the inbound proxy then go to transaction "SXMB_MONI" of ECC to check whether a message which outbound proxy is required to send to PI appears over there, if it appears there that means there is no issue on programming of proxy.
Hope it might help in finding resolution.
Thanks,
Amit
Maybe you are looking for
-
Creating a report with YTD values
Hello experts , I have a requirement wherein I have to modify a few Cash Spend reports in monthly movements format to Year to Date (YTD) format.I am a bit confused with the terms Monthly movements and Year to Date , can anyone who has some knowledge
-
Grain much worse on DVD than in FC timeline
Hi everybody. I'm working with some clips that are too dark. I brightened them in Final Cut using three-way color corrector, exported the timeline as usual and burned the film onto DVD. The grain is about twice as bad on the DVD as it is in Final Cut
-
Does cinema 4d lite work without cinema 4d
If I get the Creative Cloud subscription, because I only have CS.6 right now, does Cinema 4d Lite work in After Effects without the whole Cinema 4d program?
-
How to Add Industry Code in web Ui search result List
Hello Friends, I need some help from you... We have a Requirement like In Business Partner (BP) we have Identification tab in that we have again Industries. My client requirement is they need Industry codes In WEB UI Search Result list. Could you ple
-
Hello, how can we see the application patch number for a particular activity in finance? thanks.