Calling T-code with JCO
Hi,
I want to write a small java application that simulate user activity on SAP.
can i use JCO to activate T-codes on SAP?
if so, how do i do it? if not, is there any other way?
thanks,
Eldad
Hi Precise,
Are you using EP?
You can create a SAP transaction iview for invoking SAP T-Code from EP.
Check this link if it helps you..
http://help.sap.com/saphelp_nw2004s/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm
regards,
avadh
Similar Messages
-
Hello everybody,
I have an application which a call a BAPI in an ECC System. This BAPI is a specific one, and it is developed in Batch input to create a Billing document from a sales order.
This call take too much time and my java program don't wait for the answer of it. I have done some performance check on the program and this call take more of 1 minutes to finish.
Here is my program :
//-Fill the entry parameter-
//Import parameter
paramImport = function.getImportParameterList();
paramImport.setValue(SalesOrder, Constants.IV_VBELN);
//Define Export parameter list for the returning Data
paramExport = function.getExportParameterList();
//Execute the BAPI
client.execute(function.getName(), paramImport, paramExport);
The fact it is developped in Batch input could be a problem ? Tell me if there is a solution to speed up the process or to say to my java program to wait until the answer of the BAPI.
Thanks.Hello Sir,
I am a student who is pursuing a project that deals with JCo 3.
I read your question on the forum and think that you have done the JCo stuff and can answer my questions.
Kindly, try to shed some light on following question:
Q1: I simply want to start with connecting my SAP system. I have a user ID and password for the same.
I saw some examples where they use "JCo.createClient(....)" and "JCo.client.connect()" to simply connect the client but
when I type in the code it shows me an error, because they are using package "com.sap.mw.jco" but since I am using JCo3,
I don't have that package instead I have "com.sap.conn.jco" which do not have createClient function.
Q2: By setting the classpath for "sapjco.jar" I was able to compile one of the sample programs but could not run it. Do you
know how to run the SAP JCo program.
Your guidance will be highly appreciated
-Thanks
-Dmukhi -
I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li -
Call T.Code MB5B from with in BSP
Hi All
i want ur's guidance on calling a Report Transaction Code (T.Code) from with in the BSP.
Like T.Code MB5B is for Stock on Posting date .
i want to call it in BSP with in the frame.
please guide me .
Regards
SachinHi
I have only one restriction that result of call should be with in BSP.
As u saying if it possible through iview then i can go for this.
I refered some threads by which we r Log-in into SAP then it opening new session of SAP GUI of desired code .
I think i have to use webGUI , first make a webGUI of t.code then call it in BSP , but how to initiate it , i don,t kow that.
Regrads
Sachin -
Suddenly NoSuchMethodError on calling DOCUMENT_CREATE2 with JCo
Hi.
I'm working with JCo to create ("BAPI_DOCUMENT_CREATE2") and modify ("BAPI_DOCUMENT_CHANGE2", "BAPI_DOCUMENT_DELETE") documents in SAP R/3.
Until yesterday all worked fine. Suddenly I get a "NoSuchMethodError" if I call this methods.
Is it possible that the server denies the execution of this methods?
BAPI_DOCUMENT_GETLIST and similar methods are still working.
thanks,
StefanHello
this looks like you are trying to call a java method which does not exist. Maybe you changed something in your java coding or you forgot to pack required .jar and .class files into your java application
also refer to java docs for
<a href="http://java.sun.com/j2se/1.5.0/docs/api/java/lang/NoSuchMethodError.html">NoSuchMethodError</a>
regards
franz
reward points if useful -
Calling an existing C code with JNI under linux.
Hi all,
I am trying to use an exsiting c code with jni but I am keep getting
java.lang.UnsatisfiedLinkError, I am working under linux.
This is what I have done so far:
1.export LD_LIBRARY_PATH='pwd'/lib
2. created HspellNative.java with the static System.loadLibrary("HspellNative") and native function called hspellInit
3. compiled the java class
4. javah -jni HspellNative
5. HspellNative.c:
#include <jni.h>
#include <stdio.h>
#include "HspellNative.h"
#include "hspell.h"
JNIEXPORT jint JNICALL
Java_HspellNative_hspellInit ( JNIEnv* env, jobject obj )
struct dict_radix **dict;
return ( (jint) (hspell_init(dict,0) ) );
6. could be the problematic one:
gcc -o lib/libHspellNative.so -shared -I/opt/bea/jdk142_05/include -I/opt/bea/jdk142_05/include/linux hspell.c HspellNative.c
7. java HspellNative
8. getting the following error:
Exception in thread "main" java.lang.UnsatisfiedLinkError: /opt/haim/Hspell/hspell-0.9/lib/libHspellNative.so: /opt/haim/Hspell/hspell-0.9/lib/libHspellNative.so: undefined symbol: hspell_debug
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1586)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1511)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at HspellNative.<clinit>(HspellNative.java:18)
My problem is that I don't know how to combine my HspellNative.c to the existing hspell.c, I know I should put them together in the shared library somehow, but how ?
Please advice.
Thanks in advance,
Haim.I know there is something wrong with the .so, the question is: what ? and how do I fix it ?
This is the ldd ldd libHspellNative.so output:
/etc/libcwait.so => /etc/libcwait.so (0x0060b000)
libc.so.6 => /lib/tls/libc.so.6 (0x00111000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x00359000)
I have no idea what it means...
I think I will try the SWIG.
Thanks any way. -
Import parameter is empty after an RFC call from BW to JCo
I am calling a Java function (implemented using JCO and deployed on J2EE stack of the Portal box) from within a user-exit in BW (on a separate box) using RFC. The code in BW looks like:
CALL FUNCTION 'Z_BW_VALIDATE_PROXY' DESTINATION 'ACF2PROXY'
EXPORTING
IREQUESTOR = 'AE012345'
IREQUESTED = '012345'
IMPORTING
ERESULT = lv_result
EXCEPTIONS
SYSTEM_FAILURE = 1 message lv_rfc_mess
COMMUNICATION_FAILURE = 2 message lv_rfc_mess.
The following are working/setup correctly:
1. RFC destination ACF2PROXY, in BW using transaction SM59;
2. Java function 'Z_BW_VALIDATE_PROXY' , as the server log on the Portal(J2EE) shows the correct IMPORT and EXPORT parameters after processing a call from BW;
The data types of the parameters in the function call above matches with those of the formal parameters in Java function where they are defined using JCO data types (export parameter is defined at CHAR 1 at both places).
The problem is that I am not getting any value back in the IMPORT parameter 'lv_result'. I am expecting either '0' or '1' which is populated correctly in the Java function.
Any insight is appreciated.The following is the code of the method in the class that inherits from JCO.Server. In this method the export parameter ERESULT is set with the value of variable 'result'. I thought it may be helpful to reporduce it here.
protected void handleRequest(JCO.Function function) throws MMException
if (function == null) {
LOGGER.logInfo("handleRequest - JCO.Function object is null.");
return;
LOGGER.logDebug("handleRequest(" + function.getName() + ")");
//process this function only, although I don't know what else would fall to this
//server request method...
if (function.getName().equalsIgnoreCase(ACF2Listener.ABAP_RFC_PROXY_FUNCTION)) {
//get input & output definitions from RFC. These are defined in the repository interface definition
JCO.ParameterList input = function.getImportParameterList();
JCO.ParameterList output = function.getExportParameterList();
LOGGER.logDebug("Received the following from ABAP: " + input.toString());
String requestor = input.getString("IREQUESTOR");
String requested = input.getString("IREQUESTED");
//call DAO to read ACF2 for these values
String result = null;
try {
ACF2DAO acf2 = ACF2DAO.getInstance();
if (acf2 != null) {
result = acf2.getACF2Delegation(requestor,requested);
catch (MMException e) {
LOGGER.logError("Exception occured during ACF2 DAO lookup: " + e.getMessage());
throw e;
output.setValue(result, "ERESULT");
LOGGER.logDebug("ACF2 Service Call returning: " + output.toString());
else {
throw new JCO.AbapException("NOT_SUPPORTED","This service is not implemented by the ACF2 Proxy external server.");
Thanks
Sanjeev -
How to call java code in xsl?
I'm trying to call java code in xsl. I've not been able to do so so far....any help is greatly appreciated.
Here's my xsl:
<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.1"
xmlns:xalan="http://xml.apache.org/xalan"
xmlns:java="http://xml.apache.org/xalan/java"
extension-element-prefixes="java">
<xsl:output method="xml" indent="yes"/>
<xsl:strip-space elements="*"/>
<xsl:template match="data_order">
<order xsl:use-attribute-sets="order-info"></order>
<fromdate><xsl:value-of select="ds/temporal/ds_start_date"/></fromdate>
<stringdate><xsl:variable name="stringDate" select="java:ConvertDate2.changeDate(ds_start_date)"/>
</stringdate>
<thrudate><xsl:value-of select="ds/temporal/ds_stop_date"/></thrudate>
<chans><xsl:apply-templates select="ds/subset_spec/channels"/></chans>
</xsl:template>
<xsl:attribute-set name="order-info">
<xsl:attribute name="id"><xsl:value-of select="@job_id"/></xsl:attribute>
<xsl:attribute name="job"><xsl:value-of select="@origin"/></xsl:attribute>
</xsl:attribute-set>
<xsl:template match="channels">
<xsl:copy use-attribute-sets="sequence">
<xsl:apply-templates/>
</xsl:copy>
</xsl:template>
<xsl:attribute-set name="sequence">
<xsl:attribute name="index"><xsl:value-of select="position()"/></xsl:attribute>
</xsl:attribute-set>
</xsl:stylesheet>
And here's my java code
import java.io.*;
import java.util.*;
import java.lang.*;
public class ConvertDate2
public static String changeDate(String inputdate)
String date_array[];
String combined_date;
date_array = inputdate.split("[-]");
combined_date = date_array[0]+ date_array[1]+ date_array[2];
return combined_date;
}//end changeDate
}// end classTry Changing your namespace for java to ConvertDate2(This class should be in classpath) and replace
<stringdate><xsl:variable name="stringDate" select="java:ConvertDate2.changeDate(ds_start_date)"/>
</stringdate>
with
<stringdate><xsl:variable name="stringDate" select="java:changeDate(ds_start_date)"/>
</stringdate>
Make sure your query matches with ds_start_date correctly. -
Error while executing BBP_UPDATE_PORG Tr Code with ADD Option
Hi All,
I changed the Back end Vendor Master Data - Purchasing View (Example Accounting Number) and run the BBPUPDVD Tr code in SRM. The Business Partner (Vendor) data is updated correctly in SRM System from Back End System.
We have set of purchasing organisations like one local (SRM) Purchasing Organisation and respective Back end Purchasing Organisation (account number). When ever I run BBPUPDVD, the SRM system updates the backend vendor master data with back end purchasing organisation into SRM Standard tables. Then I am running BBP_UPDATE_PORG Tr code to have updated data into SRM Local Purchasing Organisation. I am receiving error message.
Example Scenario:
step 1: Present values in Vendor Master Vendor Number 100250, Purchaing Organisation : 1010 A/c Number: 100250-1010
and I changed the account number as 10025o-test for vendor 100250 and pur organisation 1010.
step 2: I run the BBPUPDVD in SRM System.
Step 3: I checked the values in BBPMAININT - vendor data (for backend vendor number 100250 and backend pur organisation - 1010). The SRM system replicates the values correct.
Step 4: I executed BBP_UPDATE_PORG and replaced the local (SRM) business partner (for local vendor number - 100250 and local purchasing organisation) - REPLACE Option. Then SRM replaces the SRM Business Partner (local) Data with Back end Vendor Master Data and also Back End vendor master data is deleted in SRM System. Now I have updated business partner details in SRM System as SRM Local an no SRM Back End Vendor Master Data in SRM System. This step is working fine.
Step 5: One more time I am executing BBP_UPDATE_PORG Tr code with Add option to have SRM Back End Details (in SRM System) from SRM Local Details (SRM System). Then the system is error message in SM13 Tr code.
Kind Note: There is no SRM Back End Vendor details in SRM System which I want to have with the help of executing BBP_UPDATE_PORG Tr code with Add option.
For analysis I went to ST22 (dump Analysis), the SRM gave an error message like:
Runtime Error DYNPRO_SEND_IN_BACKGROUND
Date and Time 09/15/2008 10:56:58
ShrtText
Screen output without connection to user.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLBBP_PARTNER_MAINT" had to be terminated because
one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Information on where terminated
The termination occurred in the ABAP program "SAPLBBP_PARTNER_MAINT" in "BBP_PORG_INSERT".
The main program was "RSM13000 ".
The termination occurred in line 59 of the source code of the (Include) program "LBBP_PARTNER_MAINTU11"
of the source code of program "LBBP_PARTNER_MAINTU11" (when calling the editor 590).
The program "SAPLBBP_PARTNER_MAINT" was started in the update system.
56
57 * update database
58 IF NOT LT_FRG0060_NEW[] IS INITIAL.
>>>>> INSERT BBPM_BUT_FRG0060 FROM TABLE LT_FRG0060_NEW.
60 ENDIF.
61
62 IF NOT LT_FRG0061_NEW[] IS INITIAL.
63 INSERT BBPM_BUT_FRG0061 FROM TABLE LT_FRG0061_NEW.
64 ENDIF.
Kindly guide me or provide solution.
We are in SRM 4.0 and ECC 5.0.
Thanks a lot in advance.
Regards,
Sudarsan
Edited by: KOYYA SUDARSANA NAIDU on Sep 15, 2008 9:09 PM
Edited by: KOYYA SUDARSANA NAIDU on Sep 17, 2008 8:46 PMHi All,
I changed the Back end Vendor Master Data - Purchasing View (Example Accounting Number) and run the BBPUPDVD Tr code in SRM. The Business Partner (Vendor) data is updated correctly in SRM System from Back End System.
We have set of purchasing organisations like one local (SRM) Purchasing Organisation and respective Back end Purchasing Organisation (account number). When ever I run BBPUPDVD, the SRM system updates the backend vendor master data with back end purchasing organisation into SRM Standard tables. Then I am running BBP_UPDATE_PORG Tr code to have updated data into SRM Local Purchasing Organisation. I am receiving error message.
Example Scenario:
step 1: Present values in Vendor Master Vendor Number 100250, Purchaing Organisation : 1010 A/c Number: 100250-1010
and I changed the account number as 10025o-test for vendor 100250 and pur organisation 1010.
step 2: I run the BBPUPDVD in SRM System.
Step 3: I checked the values in BBPMAININT - vendor data (for backend vendor number 100250 and backend pur organisation - 1010). The SRM system replicates the values correct.
Step 4: I executed BBP_UPDATE_PORG and replaced the local (SRM) business partner (for local vendor number - 100250 and local purchasing organisation) - REPLACE Option. Then SRM replaces the SRM Business Partner (local) Data with Back end Vendor Master Data and also Back End vendor master data is deleted in SRM System. Now I have updated business partner details in SRM System as SRM Local an no SRM Back End Vendor Master Data in SRM System. This step is working fine.
Step 5: One more time I am executing BBP_UPDATE_PORG Tr code with Add option to have SRM Back End Details (in SRM System) from SRM Local Details (SRM System). Then the system is error message in SM13 Tr code.
Kind Note: There is no SRM Back End Vendor details in SRM System which I want to have with the help of executing BBP_UPDATE_PORG Tr code with Add option.
For analysis I went to ST22 (dump Analysis), the SRM gave an error message like:
Runtime Error DYNPRO_SEND_IN_BACKGROUND
Date and Time 09/15/2008 10:56:58
ShrtText
Screen output without connection to user.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLBBP_PARTNER_MAINT" had to be terminated because
one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Information on where terminated
The termination occurred in the ABAP program "SAPLBBP_PARTNER_MAINT" in "BBP_PORG_INSERT".
The main program was "RSM13000 ".
The termination occurred in line 59 of the source code of the (Include) program "LBBP_PARTNER_MAINTU11"
of the source code of program "LBBP_PARTNER_MAINTU11" (when calling the editor 590).
The program "SAPLBBP_PARTNER_MAINT" was started in the update system.
56
57 * update database
58 IF NOT LT_FRG0060_NEW[] IS INITIAL.
>>>>> INSERT BBPM_BUT_FRG0060 FROM TABLE LT_FRG0060_NEW.
60 ENDIF.
61
62 IF NOT LT_FRG0061_NEW[] IS INITIAL.
63 INSERT BBPM_BUT_FRG0061 FROM TABLE LT_FRG0061_NEW.
64 ENDIF.
Kindly guide me or provide solution.
We are in SRM 4.0 and ECC 5.0.
Thanks a lot in advance.
Regards,
Sudarsan
Edited by: KOYYA SUDARSANA NAIDU on Sep 15, 2008 9:09 PM
Edited by: KOYYA SUDARSANA NAIDU on Sep 17, 2008 8:46 PM -
Error while calling BAPI_PARTNEREMPLOYEE_CREATE BAPI using JCO
Hi All,
Our requirement is to create and update customer contact details from java application. For this purpose we are trying to call BAPI_PARTNEREMPLOYEE_CREATE BAPI for create contact and BAPI_PARTNEREMPLOYEE_EDIT for updating contact information. As these BAPIs are of online version, error is coming while calling these BAPIs.
So is there any way to call these BAPIs through JCO or are there any alternative BAPIs available for same purpose?
Thanks in advance,
Arati.Hi,
All the bapi or function module available in SAP to create contact person will internally do a call transaction to VAP1 and VAP2 tcodes in order to create or change contact person respectively.
We had a similar problem when we were creating and updating customer contact person using inbound idoc. We then created a bdc recording for the same and then created two function module with name Z_CREATE_CONTACT and Z_CHANGE_CONTACT. In your case you can make this function modules as RFC enabled FM and call them using JCO I guess.
KR Jaideep, -
Need sample code with RV_INVOICE_CREATE used
Hi everybody!
I need sample code with RV_INVOICE_CREATE or similar FMs used.
The thing is that I do not know how to populate parametres of this and other invoicing FMs....
For example, there are some tables to be passed to RV_INVOICE_CREATE
TABLES
XKOMFK = XKOMFK
XKOMV = XKOMV
XTHEAD = XTHEAD
XVBFS = XVBFS
XVBPA = XVBPA
XVBRK = XVBRK
XVBRP = XVBRP
XVBSS = XVBSS
How to populate them? I mean how to fill them with needed values?
Useful answers will be awarded.
Kind regards, M.RV_INVOICE_CREATE is the function module to create invoice based on delivery .
when you pass delivery number ,it will create invoice ,see the invoice number in vf02,vf03 transaction. and also see the data vbrk,vbrp tables
I have done this development and i have cancelled invoice,reverse goods issue,updated the delivery and again i am createing invoice..see the below progrm to get better understanding.
REPORT ZWM_OVERWEIGHT_FIX no standard page heading
message-id zwm.
======================================================================
Program Name : ZWM_OVERWEIGHT_FIX *
Description : Tool to fix Overweight in delivery line item, *
Used All Function module to cancel invoice , *
Reverse the goods issue ,Update Delivery qty,Create *
invoice *
Author : Seshu *
Date : 05/08/2007 *
MODIFICATION HISTORY *
DATE | AUTHOR | CHANGE # | DESCRIPTION OF MODIFICATION *
--|||--
05/08/07| Seshu | DEVK921979 | Initial *
D A T A - D E C L A R A T I O N *******************
Tables
Tables : vbak,
vbap,
vbfa,
likp,
lips,
vbrk,
vbrp.
Internal Tables
data : i_lips like lips occurs 0 with header line,
i_vbap like vbap occurs 0 with header line.
Variables
data : v_deliv like vbfa-vbelv,
v_invoic like vbfa-vbelv.
Data Declaration Part for Post Goods Issue
DATA: l_vbeln LIKE likp-vbeln,
l_vbkok LIKE vbkok,
i_prot LIKE prott OCCURS 0 WITH HEADER LINE,
ef_error_any_0 TYPE c,
ef_error_in_item_deletion_0 TYPE c,
ef_error_in_pod_update_0 TYPE c,
ef_error_in_interface_0 TYPE c,
ef_error_in_goods_issue_0 TYPE c,
ef_error_in_final_check_0 TYPE c,
d_return LIKE bapireturn1.
Internal tables for BAPI Function Module
data : i_cret like BAPIRETURN1 occurs 0 with header line,
i_csucess like BAPIVBRKSUCcESS occurs 0 with header line,
i_ret2 like bapiret2 ,
flag type c,
i_mesg like mesg occurs 0 with header line.
Data Declaration for Invoice Creation
DATA: VBSK_I LIKE VBSK.
data: d_success type c.
DATA: XKOMFK LIKE KOMFK OCCURS 0 WITH HEADER LINE,
XKOMV LIKE KOMV OCCURS 0 WITH HEADER LINE,
XTHEAD LIKE THEADVB OCCURS 0 WITH HEADER LINE,
XVBFS LIKE VBFS OCCURS 0 WITH HEADER LINE,
XVBPA LIKE VBPAVB OCCURS 0 WITH HEADER LINE,
XVBRK LIKE VBRKVB OCCURS 0 WITH HEADER LINE,
XVBRP LIKE VBRPVB OCCURS 0 WITH HEADER LINE,
XVBSS LIKE VBSS OCCURS 0 WITH HEADER LINE,
XKOMFKGN LIKE KOMFKGN OCCURS 0 WITH HEADER LINE.
S E L E C T I O N - S C R E E N ******************
Selection-screen
Selection-screen : begin of block blk with frame title text-001.
parameters : p_vbeln like vbak-vbeln obligatory.
selection-screen : end of block blk.
A T - S E L E C T I O N - S C R E E N ***************
Validation on Sales order
at selection-screen on p_vbeln.
Check the data on VBAK Table
select single vbeln from vbak into vbak-vbeln
where vbeln = p_vbeln.
if sy-subrc ne 0.
message e006 with p_vbeln.
endif.
S T A R T - O F - S E L E C T I O N *******************
Start-of-selection.
break sreddy.
Get the Invoice Number corresponding Sales Order Number
perform get_invoice.
Step 1.
Cancel the Invoice - Transaction VF11
perform cancel_invoice.
Reverse the goods issue
perform reverse_goodsissue.
Get the Order and Delivery Items
perform get_sales_deliv.
Delivery Change
perform Delivery_change.
Create Invoice document
perform invoice_create.
E N D - O F - S E L E C T I O N *******************
end-of-selection.
if flag = 'X'.
message i012 with p_vbeln.
endif.
*& Form get_invoice
Get Invoice Number
FORM get_invoice.
Clear Variables
clear : v_deliv,
v_invoic,
flag.
Get the Delivery Number First
select single vbeln from vbfa into v_deliv
where vbelv = p_vbeln
and vbtyp_n = 'J'.
if sy-subrc ne 0.
message i004 with p_vbeln.
stop.
endif.
Get the Invoice Number
select single vbeln from vbfa into v_invoic
where vbelv = p_vbeln
and vbtyp_n = 'M'.
if sy-subrc ne 0.
message i003 with p_vbeln.
stop.
endif.
ENDFORM. " get_invoice
*& Form cancel_invoice
Cancel the Invoice
FORM cancel_invoice.
clear : i_ret2,
i_cret,
i_csucess.
refresh : i_cret,
i_csucess.
CALL FUNCTION 'BAPI_BILLINGDOC_CANCEL1'
EXPORTING
BILLINGDOCUMENT = v_invoic
TESTRUN =
NO_COMMIT =
BILLINGDATE =
TABLES
RETURN = i_cret
SUCCESS = i_csucess
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = space
IMPORTING
RETURN = i_ret2.
read table i_cret with key type = 'E'.
if sy-subrc ne 0.
message i005 with v_invoic.
stop.
endif.
ENDFORM. " cancel_invoice
*& Form reverse_goodsissue
Reverse the goods Issue
FORM reverse_goodsissue.
Local Variable
data : lv_vbtyp like likp-vbtyp.
clear : i_mesg,
lv_vbtyp.
refresh : i_mesg.
select single vbtyp from likp into lv_vbtyp
where vbeln = v_deliv.
CALL FUNCTION 'WS_REVERSE_GOODS_ISSUE'
EXPORTING
I_VBELN = v_deliv
I_BUDAT = sy-datum
I_COUNT =
I_MBLNR =
I_TCODE =
I_VBTYP = lv_vbtyp
TABLES
T_MESG = i_mesg
EXCEPTIONS
ERROR_REVERSE_GOODS_ISSUE = 1
OTHERS = 2
if sy-subrc ne 0.
message i007 with v_deliv.
endif.
ENDFORM. " reverse_goodsissue
*& Form get_sales_deliv
Get the Sales order and Deliv Items
FORM get_sales_deliv.
Local Variables
data : lv_kwmeng like vbap-kwmeng.
clear : i_lips,
i_vbap.
refresh : i_lips,
i_vbap.
Select the data from LIPS
select * from lips into table i_lips
where vbeln = v_deliv.
if sy-subrc ne 0.
message i008 with v_deliv.
stop.
endif.
sort i_lips by vbeln posnr.
Get the Sales order Item Data.
select * from vbap into table i_vbap
where vbeln = p_vbeln.
if sy-subrc ne 0.
message i006 with p_vbeln.
stop.
endif.
sort i_vbap by vbeln posnr.
Compare delivery Item and Order Items
loop at i_lips.
clear lv_kwmeng.
read table i_vbap with key posnr = i_lips-posnr.
if sy-subrc eq 0.
lv_kwmeng = i_vbap-kwmeng * 2.
if lv_kwmeng >= i_lips-lfimg.
i_lips-lfimg = i_vbap-kwmeng.
modify i_lips.
endif.
endif.
endloop.
ENDFORM. " get_sales_deliv
*& Form Delivery_change
Delivery Update
FORM Delivery_change.
Clear : i_prot.
refresh : i_prot.
Delivery Update
CALL FUNCTION 'LE_MOB_DELIVERY_UPDATE'
EXPORTING
do_commit = 'X'
TABLES
t_delivery_items = i_lips
prot = i_prot
EXCEPTIONS
conversion_overflow = 1
essential_data_missing = 2
error = 3
nothing_to_update = 4
lock_after_update_failed = 5
error_in_delivery_update = 6
OTHERS = 7.
COMMIT WORK.
IF sy-subrc <> 0.
MESSAGE i009 with v_deliv.
endif.
Post Goods Issue
CLEAR: d_return,
i_prot,
l_vbeln,
l_vbkok.
REFRESH i_prot.
CLEAR: ef_error_in_item_deletion_0 ,
ef_error_in_pod_update_0 ,
ef_error_in_interface_0 ,
ef_error_in_goods_issue_0 ,
ef_error_in_final_check_0 .
carry out goods issue
l_vbeln = v_deliv.
l_vbkok-vbeln_vl = l_vbeln.
l_vbkok-wabuc = 'X'.
carry out goods issue
l_vbeln = v_deliv.
l_vbkok-vbeln_vl = l_vbeln.
l_vbkok-wabuc = 'X'.
SET UPDATE TASK LOCAL.
CALL FUNCTION 'WS_DELIVERY_UPDATE'
EXPORTING
vbkok_wa = l_vbkok
synchron = 'X'
no_messages_update = ' '
update_picking = 'X'
commit = 'X'
delivery = l_vbeln
nicht_sperren = 'X'
if_error_messages_send_0 = space
IMPORTING
ef_error_any_0 = ef_error_any_0
ef_error_in_item_deletion_0 = ef_error_in_item_deletion_0
ef_error_in_pod_update_0 = ef_error_in_pod_update_0
ef_error_in_interface_0 = ef_error_in_interface_0
ef_error_in_goods_issue_0 = ef_error_in_goods_issue_0
ef_error_in_final_check_0 = ef_error_in_final_check_0
TABLES
prot = i_prot
EXCEPTIONS
error_message = 1
OTHERS = 2.
if sy-subrc ne 0.
message i010 with v_deliv.
else.
COMMIT WORK .
endif.
ENDFORM. " Delivery_change
*& Form invoice_create
Invoice Creation
FORM invoice_create.
refresh: XKOMFK, XKOMV,
XTHEAD, XVBFS,
XVBPA, XVBRK,
XVBRP, XVBSS.
clear : XKOMFK, XKOMV,
XTHEAD, XVBFS,
XVBPA, XVBRK,
XVBRP, XVBSS,
VBSK_I.
VBSK_I-SMART = 'F'.
XKOMFK-VBELN = v_deliv.
XKOMFK-VBTYP = 'J'.
APPEND XKOMFK.
CALL FUNCTION 'RV_INVOICE_CREATE'
EXPORTING
VBSK_I = VBSK_I
WITH_POSTING = 'C'
TABLES
XKOMFK = XKOMFK
XKOMV = XKOMV
XTHEAD = XTHEAD
XVBFS = XVBFS
XVBPA = XVBPA
XVBRK = XVBRK
XVBRP = XVBRP
XVBSS = XVBSS.
if sy-subrc eq 0.
COMMIT WORK.
flag = 'X'.
else.
message i011 with p_vbeln.
endif.
ENDFORM. " invoice_create
Reward Points if it is helpful
Thanks
Seshu -
Hello,
I am here because I have exhausted my Coldfusion/Java ssl keystore certs trouble shooting abilities. Here is the issue. I am developing a Coldfusion 11 application that must make api calls to Chase payconnexion SOAP services. I am using the coldfusion cfhttp tags to do this, which is using the java jre 1.7.x to accomplish this. The problem, I am getting generic 500 internal server errors from Chase. They claim that I am not sending a cert during the ssl exchange. What I have done is:
- put our wildcard cert/key pair in the coldfusion keystore
- put our root and chain in the keystore
- put the chase server cert in the keystore
- converted the key/crt files to .pfx and make the calls
to chase with those, something like:
<cfset objSecurity = createObject("java", "java.security.Security") />
<cfset storeProvider = objSecurity.getProvider("JsafeJCE")/>
<cfset Application.sslfix = true />
<cfhttp url="#chase_api_server#/"
result="http_response"
method="post"
port="1401" charset="utf-8"
clientCert = "#cert_path#/#cert_file1#"
clientCertPassword = "#cert_password#">
<cfhttpparam type="header" name="SOAPAction" value="updateUserProfileRequest"/>
<cfhttpparam type="header" name="Host" value="ws.payconnexion.com" />
<cfhttpparam type="xml" value="#trim(my_xml)#"/>
</cfhttp>
Here is what I see in the Cf logs, can anyone help me interpret what
is happening ??
Thanks,
Bob
=============================================================
found key for : 1
chain [0] = [
Version: V3
Subject: CN=*.payments.austintexas.gov, O=City of Austin, L=Austin, ST=Texas, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
Validity: [From: Mon Aug 11 12:39:37 CDT 2014,
To: Thu Sep 01 18:34:24 CDT 2016]
Issuer: CN=Entrust Certification Authority - L1C, OU="(c) 2009 Entrust, Inc.", OU=www.entrust.net/rpa is incorporated by reference, O="Entrust, Inc.", C=US
SerialNumber: [<snip>7]
Certificate Extensions: 9
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.entrust.net
accessMethod: caIssuers
accessLocation: URIName: http://aia.entrust.net/2048-l1c.cer
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.entrust.net/level1c.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [1.2.840.113533.7.75.2]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[CertificatePolicyId: [2.23.140.1.2.2]
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
[7]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_Encipherment
[8]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
DNSName: *.payments.austintexas.gov
DNSName: payments.austintexas.gov
[9]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [1] = [
Version: V3
Subject: CN=Entrust Certification Authority - L1C, OU="(c) 2009 Entrust, Inc.", OU=www.entrust.net/rpa is incorporated by reference, O="Entrust, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Fri Nov 11 09:40:40 CST 2011,
To: Thu Nov 11 20:51:17 CST 2021]
Issuer: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
SerialNumber: [ <snip>]
Certificate Extensions: 7
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.entrust.net
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:0
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.entrust.net/2048ca.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.5.29.32.0]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[6]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[7]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [2] = [
Version: V3
Subject: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>public exponent: 65537
Validity: [From: Fri Dec 24 11:50:51 CST 1999,
To: Tue Jul 24 09:15:12 CDT 2029]
Issuer: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
SerialNumber: [<snip>]
Certificate Extensions: 3
[1]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
[2]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[3]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
trustStore is: /opt/coldfusion11/jre/lib/security/cacerts
trustStore type is : jks
trustStore provider is :
init truststore
adding as trusted cert:
<snip 85 certs>
trigger seeding of SecureRandom
done seeding SecureRandom
Jan 23, 2015 13:15:37 PM Information [ajp-bio-8014-exec-7] - Starting HTTP request {URL='https://ws.payconnexion.com:1401/pconWS/9_5/', method='post'}
Ignoring unsupported cipher suite: TLS_DHE_DSS_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_DHE_DSS_WITH_AES_256_CBC_SHA256
Ignoring unsupported cipher suite: TLS_DHE_RSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_DHE_RSA_WITH_AES_256_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
Ignoring unsupported cipher suite: TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
Ignoring unsupported cipher suite: TLS_RSA_WITH_AES_256_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
Ignoring unsupported cipher suite: TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
Ignoring unsupported cipher suite: TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
Ignoring unsupported cipher suite: TLS_RSA_WITH_AES_128_CBC_SHA256
Allow unsafe renegotiation: true
Allow legacy hello messages: true
Is initial handshake: true
Is secure renegotiation: false
%% No cached client session
*** ClientHello, TLSv1
RandomCookie: GMT: 1405197529 bytes = { 191, 115, 95, 85, 79, 234, 145, 176, 62, 70, 36, 102, 168, 15, 127, 174, 88, 118, 4, 177, 226, 5, 254, 55, 108, 203, 80, 80 }
Session ID: {}
Cipher Suites: [TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA, TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA, TLS_RSA_WITH_AES_256_CBC_SHA, TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA, TLS_ECDH_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_RSA_WITH_AES_256_CBC_SHA, TLS_DHE_DSS_WITH_AES_256_CBC_SHA, TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA, TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA, TLS_ECDH_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, TLS_ECDHE_ECDSA_WITH_RC4_128_SHA, TLS_ECDHE_RSA_WITH_RC4_128_SHA, SSL_RSA_WITH_RC4_128_SHA, TLS_ECDH_ECDSA_WITH_RC4_128_SHA, TLS_ECDH_RSA_WITH_RC4_128_SHA, TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA, TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_RC4_128_MD5, TLS_EMPTY_RENEGOTIATION_INFO_SCSV]
Compression Methods: { 0 }
Extension elliptic_curves, curve names: {secp256r1, sect163k1, sect163r2, secp192r1, secp224r1, sect233k1, sect233r1, sect283k1, sect283r1, secp384r1, sect409k1, sect409r1, secp521r1, sect571k1, sect571r1, secp160k1, secp160r1, secp160r2, sect163r1, secp192k1, sect193r1, sect193r2, secp224k1, sect239k1, secp256k1}
Extension ec_point_formats, formats: [uncompressed]
Extension server_name, server_name: [host_name: ws.payconnexion.com]
ajp-bio-8014-exec-7, WRITE: TLSv1 Handshake, length = 191
ajp-bio-8014-exec-7, READ: TLSv1 Handshake, length = 81
*** ServerHello, TLSv1
RandomCookie: <snip>
Cipher Suite: TLS_RSA_WITH_AES_256_CBC_SHA
Compression Method: 0
Extension renegotiation_info, renegotiated_connection: <empty>
%% Initialized: [Session-5, TLS_RSA_WITH_AES_256_CBC_SHA]
** TLS_RSA_WITH_AES_256_CBC_SHA
ajp-bio-8014-exec-7, READ: TLSv1 Handshake, length = 4183
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=ws.payconnexion.com, OU=PayConnexion, O=JPMorgan Chase, L=New York, ST=New York, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Sun Apr 20 19:00:00 CDT 2014,
To: Tue Jun 02 18:59:59 CDT 2015]
Issuer: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
SerialNumber: [ <snip>]
Certificate Extensions: 8
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://se.symcd.com
accessMethod: caIssuers
accessLocation: URIName: http://se.symcb.com/se.crt
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://se.symcb.com/se.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.16.840.1.113733.1.7.54]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
], PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.2
qualifier: <snip>
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
2.16.840.1.113730.4.1
[7]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
DigitalSignature
Key_Encipherment
[8]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
DNSName: ws.payconnexion.com
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [1] = [
Version: V3
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Sun Feb 07 18:00:00 CST 2010,
To: Fri Feb 07 17:59:59 CST 2020]
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
SerialNumber: [ <snip>]
Certificate Extensions: 10
[1]: ObjectId: 1.3.6.1.5.5.7.1.12 Criticality=false
Extension unknown: DER encoded OCTET string =
<snip>
[2]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.verisign.com
[3]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[4]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:0
[5]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.verisign.com/pca3-g5.crl]
[6]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.16.840.1.113733.1.7.23.3]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
], PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.2
qualifier: <snip>
[7]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
2.16.840.1.113730.4.1
2.16.840.1.113733.1.8.1
[8]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[9]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
CN=VeriSignMPKI-2-7
[10]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [2] = [
Version: V3
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Tue Nov 07 18:00:00 CST 2006,
To: Sun Nov 07 17:59:59 CST 2021]
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
SerialNumber: [<snip>]
Certificate Extensions: 8
[1]: ObjectId: 1.3.6.1.5.5.7.1.12 Criticality=false
Extension unknown: DER encoded OCTET string =
<snip>
[2]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.verisign.com
[3]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.verisign.com/pca3.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.5.29.32.0]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
codeSigning
2.16.840.1.113730.4.1
2.16.840.1.113733.1.8.1
[7]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[8]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
Found trusted certificate:
Version: V3
Subject: CN=ws.payconnexion.com, OU=PayConnexion, O=JPMorgan Chase, L=New York, ST=New York, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: public exponent: 65537
Validity: [From: Sun Apr 20 19:00:00 CDT 2014,
To: Tue Jun 02 18:59:59 CDT 2015]
Issuer: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
SerialNumber: [ <snip>]
Certificate Extensions: 8
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://se.symcd.com
accessMethod: caIssuers
accessLocation: URIName: http://se.symcb.com/se.crt
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://se.symcb.com/se.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.16.840.1.113733.1.7.54]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
], PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.2
qualifier: <snip>
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
2.16.840.1.113730.4.1
[7]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
DigitalSignature
Key_Encipherment
[8]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
DNSName: ws.payconnexion.com
Algorithm: [SHA1withRSA]
Signature:
<snip>
ajp-bio-8014-exec-7, READ: TLSv1 Handshake, length = 13
*** CertificateRequest
Cert Types: RSA, DSS
Cert Authorities:
<Empty>
*** ServerHelloDone
matching alias: 1
*** Certificate chain
chain [0] = [
Version: V3
Subject: CN=*.payments.austintexas.gov, O=City of Austin, L=Austin, ST=Texas, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
<snip>public exponent: 65537
Validity: [From: Mon Aug 11 12:39:37 CDT 2014,
To: Thu Sep 01 18:34:24 CDT 2016]
Issuer: CN=Entrust Certification Authority - L1C, OU="(c) 2009 Entrust, Inc.", OU=www.entrust.net/rpa is incorporated by reference, O="Entrust, Inc.", C=US
SerialNumber: [<snip>]
Certificate Extensions: 9
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.entrust.net
accessMethod: caIssuers
accessLocation: URIName: http://aia.entrust.net/2048-l1c.cer
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.entrust.net/level1c.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [1.2.840.113533.7.75.2]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[CertificatePolicyId: [2.23.140.1.2.2]
[6]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
[7]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_Encipherment
[8]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
DNSName: *.payments.austintexas.gov
DNSName: payments.austintexas.gov
[9]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [1] = [
Version: V3
Subject: CN=Entrust Certification Authority - L1C, OU="(c) 2009 Entrust, Inc.", OU=www.entrust.net/rpa is incorporated by reference, O="Entrust, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>
public exponent: 65537
Validity: [From: Fri Nov 11 09:40:40 CST 2011,
To: Thu Nov 11 20:51:17 CST 2021]
Issuer: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
SerialNumber: [<snip>]
Certificate Extensions: 7
[1]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
accessMethod: ocsp
accessLocation: URIName: http://ocsp.entrust.net
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
<snip>]
[3]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:0
[4]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://crl.entrust.net/2048ca.crl]
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.5.29.32.0]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: <snip>
[6]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[7]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
chain [2] = [
Version: V3
Subject: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: <snip>public exponent: 65537
Validity: [From: Fri Dec 24 11:50:51 CST 1999,
To: Tue Jul 24 09:15:12 CDT 2029]
Issuer: CN=Entrust.net Certification Authority (2048), OU=(c) 1999 Entrust.net Limited, OU=www.entrust.net/CPS_2048 incorp. by ref. (limits liab.), O=Entrust.net
SerialNumber: [<snip>]
Certificate Extensions: 3
[1]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
[2]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Crl_Sign
[3]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
<snip>]
Algorithm: [SHA1withRSA]
Signature:
<snip>
*** ClientKeyExchange, RSA PreMasterSecret, TLSv1
ajp-bio-8014-exec-7, WRITE: TLSv1 Handshake, length = 3970
SESSION KEYGEN:
PreMaster Secret:
<snip>
CONNECTION KEYGEN:
Client Nonce:
<snip>
Server Nonce:
<snip>
Master Secret:
<snip>
Client MAC write Secret:
<snip>
Server MAC write Secret:
<snip>
Client write key:
<snip>
Server write key:
<snip>
Client write IV:
<snip>
Server write IV:
<snip>
*** CertificateVerify
ajp-bio-8014-exec-7, WRITE: TLSv1 Handshake, length = 262
ajp-bio-8014-exec-7, WRITE: TLSv1 Change Cipher Spec, length = 1
*** Finished
verify_data: { 51, 254, 40, 56, 247, 218, 130, 183, 112, 239, 95, 4 }
ajp-bio-8014-exec-7, WRITE: TLSv1 Handshake, length = 48
ajp-bio-8014-exec-7, READ: TLSv1 Change Cipher Spec, length = 1
ajp-bio-8014-exec-7, READ: TLSv1 Handshake, length = 48
*** Finished
verify_data: { 89, 182, 137, 178, 177, 31, 27, 115, 151, 90, 169, 49 }
%% Cached client session: [Session-5, TLS_RSA_WITH_AES_256_CBC_SHA]
ajp-bio-8014-exec-7, setSoTimeout(60000) called
ajp-bio-8014-exec-7, WRITE: TLSv1 Application Data, length = 1520
ajp-bio-8014-exec-7, READ: TLSv1 Application Data, length = 128
Jan 23, 2015 13:15:38 PM Information [ajp-bio-8014-exec-7] - HTTP request completed {Status Code=500 ,Time taken=1302 ms}
ajp-bio-8014-exec-7, READ: TLSv1 Application Data, length = 256
ajp-bio-8014-exec-7, READ: TLSv1 Alert, length = 32
ajp-bio-8014-exec-7, RECV TLSv1 ALERT: warning, close_notify
ajp-bio-8014-exec-7, called closeInternal(false)
ajp-bio-8014-exec-7, SEND TLSv1 ALERT: warning, description = close_notify
ajp-bio-8014-exec-7, WRITE: TLSv1 Alert, length = 32
ajp-bio-8014-exec-7, called closeSocket(selfInitiated)
ajp-bio-8014-exec-7, called close()
ajp-bio-8014-exec-7, called closeInternal(true)Ok, apparently Chase person who said we were not sending the certs and achieving mutual auth
was incorrect. The https calls were connecting, and mutual auth was taking place. The 500
error was about a soap envelope being delivered, and NOT SSL as I directed to. Everything
is working fine now.
Thanks,
Bob -
Reg calling Transaction code in Webdynpro ABAP
Hi All,
Can I call Transaction code in Webdynpro ABAP Portal Application. If so, how can this be possible? Can anybody give me a lead?
Thanks.
Kumar Saurav.Hi,
The most easy Way is here:
1) Test any Webdynpro Application from SE80 when the webdynpro Browser opens to display output
Copy its HTTP link, Suppose we get the below link
http://r3d01web1.Siemens.dk:8001/sap/bc/webdynpro/sap/z_dynamic_view?sap-client=002&sap-language=EN
2) Now replace some part of the above link ( webdynpro/sap/z_dynamic_view?sap-client=002&sap-language=EN ) with the new link part ( gui/sap/its/webgui?~transaction=PA30 )
So that the newly generated link is such that the below one:
http://r3d01web1.Siemens.dk:8001/sap/bc/gui/sap/its/webgui?~transaction=PA30
Note in place of PA30 you can put any of your desired tcode.
3) Now Just Make a webdynpro component and in its View layout put a LINK TO URL ui element
and in its property REFERENCE just past the http link ( http://r3d01web1.Siemens.dk:8001/sap/bc/gui/sap/its/webgui?~transaction=PA30 )
4) Activate and test your webdynpro Application. -
Call of Duty with i915GM loki installer, not starting
Hey,
I just installed Call of Duty with the loki installer from liflg.org.
But when i tried to run i get this error
COD 1.3 build win-x86 Mar 2 2004
----- FS_Startup -----
Current language: english
Current search path:
Z:\home\jordz\Games\CoD\main\pakb.pk3 (60 files)
Z:\home\jordz\Games\CoD\main\paka.pk3 (41 files)
Z:\home\jordz\Games\CoD\main\pak9.pk3 (149 files)
Z:\home\jordz\Games\CoD\main\pak8.pk3 (235 files)
Z:\home\jordz\Games\CoD\main\pak6.pk3 (3 files)
Z:\home\jordz\Games\CoD\main\pak5.pk3 (4858 files)
Z:\home\jordz\Games\CoD\main\pak4.pk3 (1668 files)
Z:\home\jordz\Games\CoD\main\pak3.pk3 (1992 files)
Z:\home\jordz\Games\CoD\main\pak2.pk3 (694 files)
Z:\home\jordz\Games\CoD\main\pak1.pk3 (2642 files)
Z:\home\jordz\Games\CoD\main\pak0.pk3 (12816 files)
Z:\home\jordz\Games\CoD/main
Z:\home\jordz\Games\CoD\main\localized_english_pak5.pk3 (46 files)
localized assets pak file for english
Z:\home\jordz\Games\CoD\main\localized_english_pak3.pk3 (7 files)
localized assets pak file for english
Z:\home\jordz\Games\CoD\main\localized_english_pak2.pk3 (9 files)
localized assets pak file for english
Z:\home\jordz\Games\CoD\main\localized_english_pak1.pk3 (3736 files)
localized assets pak file for english
Z:\home\jordz\Games\CoD\main\localized_english_pak0.pk3 (1204 files)
localized assets pak file for english
File Handles:
30160 files in pk3 files
execing default.cfg
couldn't exec language.cfg
couldn't exec config.cfg
couldn't exec autoexec.cfg
========= autoconfigure
configure.csv: using configuration 800 cpu MHz 256 sys MB 64 vid MB
execing configure.cfg
fs_basepath is write protected.
fs_homepath is write protected.
Hunk_Clear: reset the hunk ok
...detecting CPU, found Intel Pentium III
Measured CPU speed is 0.87 GHz
System memory is 472 MB (capped at 1 GB)
Video card memory is 64 MB
Streaming SIMD Extensions (SSE) supported
----- Client Initialization -----
----- Initializing Renderer ----
----- Client Initialization Complete -----
----- R_Init -----
Initializing OpenGL subsystem
...initializing QGL
...calling LoadLibrary( 'c:\windows\system32\opengl32.dll' ): succeeded
...setting mode 4: 800 600 FS
...using colorbits of 32
...calling CDS: ok
...registered window class
...created window@0,0 (800x600)
Initializing OpenGL driver
...getting DC: succeeded
...GLW_ChoosePFD( 32, 24, 8 )
...0 PFDs found
...hardware acceleration found
...PIXELFORMAT 1 selected
...creating GL context: succeeded
...making context current: succeeded
Initializing OpenGL extensions
GL_VENDOR: Tungsten Graphics, Inc
GL_RENDERER: Mesa DRI Intel(R) 915GM 20061017 x86/MMX/SSE2
GL_VERSION: 1.3 Mesa 6.5.2
GL_EXTENSIONS: GL_ARB_depth_texture GL_ARB_fragment_program GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_point_parameters GL_ARB_shadow GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_cull_vertex GL_EXT_compiled_vertex_array GL_EXT_convolution GL_EXT_copy_texture GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_pixels GL_EXT_point_parameters GL_EXT_polygon_offset GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_vertex_array GL_3DFX_texture_compression_FXT1 GL_APPLE_client_storage GL_APPLE_packed_pixels GL_ATI_blend_equation_separate GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_INGR_blend_func_separate GL_MESA_pack_invert GL_MESA_ycbcr_texture GL_MESA_window_pos GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_rectangle GL_NV_texgen_reflection GL_NV_vertex_program GL_NV_vertex_program1_1 GL_OES_read_format GL_SGI_color_matrix GL_SGI_color_table GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SUN_multi_draw_arrays
----- CL_Shutdown -----
RE_Shutdown( 1 )
Shutting down OpenGL subsystem
...wglMakeCurrent( NULL, NULL ): success
...deleting GL context: success
...releasing DC: success
...destroying window
...resetting display
...shutting down QGL
...unloading OpenGL DLL
Hunk_Clear: reset the hunk ok
Your video card appears to be missing one or more features required to run Call of Duty.
You should install the latest drivers for your video card, being sure to uninstall the old drivers first. If you already have the latest drivers, you should completely uninstall the drivers and then reinstall them. This fixes most problems. If the game still doesn't work, it may be that your video card does not have the minimum features required. Please check the readme for more information, including a list of supported video cards.
But i got direct rending and i tried to install the mesa-git and libgl-dri-git packages from AUR, but that didn't help.
Can somebody push me in the right direction?
Thanks
Edit:
I get this output when running codsp:
fixme:d3d:IWineD3DDeviceImpl_GetAvailableTextureMem (0x166100) : stub, simulating 64MB for now, returning 64MB left
fixme:ddraw:IDirectDrawImpl_SetCooperativeLevel (0x165328)->((nil),00000008)
fixme:d3d:IWineD3DStateBlockImpl_Release Releasing primary stateblock
fixme:keyboard:RegisterHotKey ((nil),0,0x00000001,9): stub
fixme:keyboard:UnregisterHotKey ((nil),0): stub
Last edited by jordz (2007-04-11 21:48:47)When he installed the new fibre hub, did he use his laptop to take settings off old white hub and put it on new one?... way to check is dial into the hub ( 192.168.1.254 ) go to setting and then wireless, and see if the hub name and key are the same that is printed on card and back of hub....as this could be your problem...one thing to try is set the new hub back to default ( you will have to reconnect anything that uses wireless ) and see if this sorts it out.
-
Application crashes when calling DLL built with LabVIEW 2011
Hello everybody,
Our application calls DLLs built with LabVIEW 2010 SP1. We installed LabVIEW 2011 and built some DLLs. So far so good. If we start our application and run 2010 DLLs it still works fine. If we run a 2011 DLL just once no error happens, but if we try to run the same 2011 DLL our application crashes reporting the error below. I saved the code for 2010 version and built a DLL and it works fine. Does anyone know why?
Thank you in advance.
#Date: Fr, 16. Sep 2011 16:25:25
#OSName: Microsoft Windows XP Service Pack 3
#OSVers: 5.1
#OSBuild: 2600
#AppName: PasTA
#Version: 11.0f2 32-bit
#AppKind: AppLib
#LabVIEW Base Address: 0x30000000
16.09.2011 16:25:26.181
Crash 0x0: Crash caught by NIER
File Unknown(0) : Crash: Crash caught by NIER
minidump id: 8a779b3f-51d7-4864-8e4d-6ab0195cd158
ExceptionCode: 0xC0000005
N
0x3072C804 - lvrt <unknown> + 0
0x3072CBB8 - lvrt <unknown> + 0
0x7C864191 - KERNEL32 <unknown> + 0
0x7C83AB50 - KERNEL32 <unknown> + 0
0x00000000 - PasTA <unknown> + 0
Attachments:
error.PNG 11 KBOn that note, you should be able to create DLLs in 2010 and run them with 2011, correct?? In my case, I have a 2010 built DLL (talking to sbRIO), most of the functions work when run in 2011, but a couple of them lock up LabVIEW on the desktop (but not the sbRIO), no lock ups happen with 2010 on the desktop.
Maybe you are looking for
-
Is it possible to call the Print Quote functionality from Custom ADF page
Hi, We are researching if it is possible to call the Print Quote functionality from the Custom ADF application. Goal is to pop up the PDF report upon clicking the Print Quote button on the custom page. Is it possible ? Atleast advice on the direction
-
Firefox 31.0 tries to redownload files already downloaded
I recently updated Firefox to version 31.0, installed Google Chrome, and updated Java and Adobe Flash player to the latest versions, on my laptop running Win XP Pro SP3. This was all in an attempt to overcome problems I was having using an airline re
-
I cannot launch Firefox (suddenly) nor can I open Profile Manager, what next?
Windows 7, 64 bit. Experienced some Windows updates but I restored to prior to the updates and still cannot open Firefox. Can open Safari and IE.
-
Hi, I startet to learn Apex. I use Apex 3.0. I created 3 Pages and 3 Users. Now i want to assign one page to one user. i don´t want to create 3 applications for each user. just a authentification. each user has access to only on special page. and lat
-
Error when using Check For Updates
When I try to get updates using Help->Check For Updates I got following error: java.io.IOException: Server returned HTTP response code: 503 for URL: http://www.w3.org/TR/html4/loose.dtd at sun.net.www.protocol.http.HttpURLConnection.getInputStre