Can ant call a target from my build.xml from another xml file?

can ant have a target something like this:
<target mytarget>
<antcall file="C:\app\build2.xml" targetname="blah">
</target>
Is it possible to call a target in my build.xml that will then look in a file called build2.xml and call a target in that xml file?
Thanks,
Tad

I looked at the manual and the site and couldn't find anything, you don't have to tell me the exact xml if
it bugs you, all I want to know is if it is possible and if it is what task should I use, I will look up
the attributes and how to do it.Now this really takes the biscuit.
I gave you a very specific link to the document that tells you which task to use and which arguments to set. Did you check that link? If so, what else do you want? If not, why not?

Similar Messages

Can LabVIEW call a function from a .sys file or is LabVIEW limited to dll access?

My vendor has sent me a .sys file with functions accessing their hardware. Can i call these function from labview directly or do I have to wrapper the .sys with a dll?

Well a sys file is a kernel device driver. LabVIEW does not have any direct way of accessing such a driver. The way kernel drivers are accessed is usually through a DLL which makes calls to WinAPI functions such as CreateFile(), ReadFile(), WriteFile(), CloseHandle() and DeviceIORequest(). Since these WinAPI calls are basically just DLL calls too, you could theoretically use the Call Library Node to call them and access the kernel device driver in such a way.
However for any kernel device driver with more than one or two device driver calls, it will certainly be easier in terms of development, debugging and maintenance of the code, to write actually a dedicated DLL in C/C++ for this device driver and access that DLL from LabVIEW, especially if you consider the LabVIEW datatype limitations when designing the DLL interface (Basically this same DLL can then be called from any other Windows development environment, be it Visual Basic (similar datatype limitation as LabVIEW), Delphi, (Visual) C, LabVIEW or also various scripting environments like Python and Lua.
Some of the necessary WindAPI calls are rather involved and pose quite a bit of trouble to get the parameter data right in LabVIEw.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How can I call a variable from another class

hi
If I have two classes : one and two
In class two I have a variable called : action
In class one I want to check what is the value of action.
How can I call action?

Thank you scorbett
what you told me worked fine, but my problem is that MyClass2 is an application by itself that I don't want to be executed.
Creating myClass2 as in the following:
MyClass2 myClass2 = new MyClass2();
[/code]
executes myClass2.
Can I prevent the exectuion of MyClass2, or is there another way to call the variable (action)?

How can i call one report from another report (Drill Down Approach)

Hi Friends,
I've two reports in completely different layout format.
One is in Crosstab & another is in Tabular.
Now i want to call my Tabular report(report 1) from my Crosstab (report 2) without using BO's default drill down feature. Or, you can show using BO's feature if it supports my requirement.
How to do that?
Is it at all possible?
Please share your thoughts. Thanks in advance for your time.
Regards.
Satyaki De.

hi
you can use openDocument for this.
[http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_url_reporting_opendocument_en.pdf]
I would suggest to use variables that build the HTML code for the hyperlinks dynamically, and display them in your crosstab. Set the display option for the related cells (ie. the cells where your variables are displayed in) so that the cell's contents as interpreted as HTML code.
Regards,
Stratos

Calling a method from another Java file.

I think I'm doing this right, but I'm obviously going wrong somewhere.
In order to not have one big long java file, I've created one main one to execute the program, and another to do some of the functions. I'm using eclipse, btw.
In the main file, I have
currentTB = getActiveTB(playerArea);If it works, it should get send the player area variable to the getActiveTB method, and store the value it returns in the currentTB variable, right?
In the other file, I have;
package scenes;
public class sceneIndex {
     private TerrainBlock getActiveTB(String areaCode) {
          TerrainBlock tBlock = new TerrainBlock();
                 **DOES STUFF**
          return tBlock;
}I have it set up so the second file is in the source folder "resources" and the package "scenes." The problem is I'm not calling it properly. I'm missing something simple, I think. The only error I'm getting is;
The method getActiveTB(String) is undefined...
Where am I screwing up?
EDIT: Yeah, I'm a rookie here trying to figure it out on my own. My computer science courses, so far, conveniently all consist of just one big java file. Easier to write, sure, but not very efficient/organized.
Message was edited by:
SuckerPunch

Yeah, so this is still pissing me off. I'm not sure what else to do. I've tried this a million different ways, in both eclipse and netbeans. Whatever. Here's the code, I'd love it if someone could point out the boneheaded mistake I'm making. I'm getting a little frustrated at being stuck on such a simple problem.
Main.javaimport com.jme.app.BaseGame;
import com.jme.input.KeyBindingManager;
import com.jme.input.KeyInput;
import com.jme.math.Vector3f;
import com.jme.renderer.Camera;
import com.jme.renderer.ColorRGBA;
import com.jme.scene.Node;
import com.jme.system.DisplaySystem;
import com.jme.system.JmeException;
import com.jme.util.Timer;
import com.jmex.terrain.TerrainBlock;
import resources.*;
public class Main extends BaseGame {
     /* General Variable Declaration */
     private String scene;   // Tells application which scene to load, default loads default scene
     private int width, height, depth, freq; // Creates variables to store information
     private boolean fullscreen;             // on the user's window
     private Camera playerCam; // Defines the main camera for the player, first person view
     private Timer timer; // Creates a timer to be used for FPS calculations
     private Node currentScene; // The basis for building the scene the player is in
     private TerrainBlock currentTB; // This variable holds the current landscape
     private String playerArea = new String("initial"); // Contains the string
                                                                    // code for the scene
                                                                    // the player is in,
                                                                    // defaults to the opening scene, unless changed by
                                                                    // the player loading their game
        public static void main(String[] args) {
          /* Initializes and Starts the Applications. */
          Main app = new Main();
          app.setDialogBehaviour(ALWAYS_SHOW_PROPS_DIALOG, Main.class.getClassLoader().getResource("img/spunch.jpg"));
          app.start();
     protected void update(float interpolation) {
     protected void render(float interpolation) {
     protected void initSystem() {
           * Application initialization properties (window, camera, renderer, key
           * bindings, etc)
          // Stores variables for window properties
          width = properties.getWidth();
          height = properties.getHeight();
          depth = properties.getDepth();
          freq = properties.getFreq();
          fullscreen = properties.getFullscreen();
          // Assigns renderer and creates game window
          try {
               display = DisplaySystem.getDisplaySystem(properties.getRenderer());
               display.createWindow(width, height, depth, freq, fullscreen);
               playerCam = display.getRenderer().createCamera(width, height);
          } catch (JmeException e) {
               e.printStackTrace();
               System.exit(1);
          // Sets background to black, should never be seen anyway
          display.getRenderer().setBackgroundColor(ColorRGBA.black);
          // Initializes the camera
          playerCam.setFrustumPerspective(45.0f, (float) width / (float) height,
                    1, 1000);
          Vector3f loc = new Vector3f(250.0f, 100.0f, 250.0f);
          Vector3f left = new Vector3f(-0.5f, 0.0f, 0.5f);
          Vector3f up = new Vector3f(0.0f, 1.0f, 0.0f);
          Vector3f dir = new Vector3f(-0.5f, 0.0f, -0.5f);
          // Moves and orients the camera
          playerCam.setFrame(loc, left, up, dir);
          // Update the camera since it has been changed
          playerCam.update();
          // Create a timer for FPS updates
          timer = Timer.getTimer();
          // Assign the camera as the primary display in the application
          display.getRenderer().setCamera(playerCam);
          // Initialize the escape key as a way to exit the program
          KeyBindingManager.getKeyBindingManager().set("exit",
                    KeyInput.KEY_ESCAPE);
     protected void initGame() {
          /* Game initialization */
          display.setTitle("Slumlords"); // Displays title in window
                SceneIndex sIndex = new SceneIndex();
          currentTB = sIndex.getActiveTB(playerArea);
          currentScene.attachChild(currentTB);
          currentScene.updateGeometricState(0.0f, true);
          currentScene.updateRenderState();
     protected void reinit() {
     protected void cleanup() {
}SceneIndex.javapackage resources;
import javax.swing.ImageIcon;
import com.jme.bounding.BoundingBox;
import com.jme.image.Texture;
import com.jme.math.Vector3f;
import com.jme.scene.state.TextureState;
import com.jme.system.DisplaySystem;
import com.jme.util.TextureManager;
import com.jmex.terrain.TerrainBlock;
import com.jmex.terrain.util.MidPointHeightMap;
import com.jmex.terrain.util.ProceduralTextureGenerator;
public class SceneIndex {
     private DisplaySystem display;
     public TerrainBlock getActiveTB(String areaCode) {
          TerrainBlock tBlock = new TerrainBlock();
          if (areaCode == "initial") {
               // Generates random terrain data
               MidPointHeightMap heightMap = new MidPointHeightMap (64, 1.0f);
               // Scale the data
               Vector3f terrainScale = new Vector3f(4, 0.0575f, 4);
               // Create the terrain block
               tBlock = new TerrainBlock("Terrain", heightMap.getSize(), terrainScale, heightMap.getHeightMap(), new Vector3f(0, 0, 0), false);
               tBlock.setModelBound(new BoundingBox());
               tBlock.updateModelBound();
               // Creating a blended texture based on the height map
               ProceduralTextureGenerator pTexture = new ProceduralTextureGenerator(heightMap);
               pTexture.addTexture(new ImageIcon(SceneIndex.class.getClassLoader().getResource("img/grass.gif")), -128, 0, 128);
               pTexture.addTexture(new ImageIcon(SceneIndex.class.getClassLoader().getResource("img/dirt.jpg")), 0, 128, 255);
               pTexture.addTexture(new ImageIcon(SceneIndex.class.getClassLoader().getResource("img/granite.jpg")), 128, 255, 384);
               pTexture.createTexture(64);
               // Assigning the texture to the terrain
               TextureState tState = display.getRenderer().createTextureState();
               Texture t1 = TextureManager.loadTexture(pTexture.getImageIcon().getImage(), Texture.MM_LINEAR_LINEAR, Texture.FM_LINEAR, true);
               tState.setTexture(t1, 0);
               tBlock.setRenderState(tState);
          return tBlock;
}Again, I've tried this a few different ways, and I either get a "Could Not Find Symbol" error referring to the getActiveTB(playerArea); in Main, or it just says java.lang.NoClassDefFoundError: and Exception in thread "main".
Whatever.

Help on Calling a method from another class

how can i call a method from another class.
Class A has 3 methods
i just want to call only one of these 3 methods into my another class.
How can I do that.

When i am trying this
A a=new A;
Its calling all the methods from class A. I just want
to call a specfic method.How can it be done?When i am trying this
A a=new A();
Its calling all the methods from class A. I just want to call a specfic method.How can it be done?

Calling a servlet from another servlet?

Hi
I would like to know that how can I call one Servlet from another Servlet. I have tried getServlet() method of ServletContext but it has been deprecated. I want to call a specific method of the other Servlet, is there any other way?
Thanks

I should have seen it from your previous post :(
Code of Servlet 1:
public void doGet(HttpServletRequest request,
HttpServletResponse response) throws
ServletException, IOException
RequestDispatcher rDispatch = null ;
rDispatch = getServletConfig
().getServletContext().getRequestDispatcher
("/Servlet2") ;
rDispatch.forward(request, response) ;
System.out.println("Back in 1");
I assume Servlets 1and 2 are in same web app and you've mapped your servlet2 to /Servlet2 in your web.xml
make it as
rDispatch = request.getRequestDispatcher("/Servlet2");
rDispatch.forward(request,response);
Nothin's wrong with yer servlet2

How to call WD Application from another WD Appliction

Hi all,
how can we call webdynpro application from another wbdynpro application on click of a button in the same browser.
pls suggest
regards
vishal

Hi Vishal,
Just try to Embed the another WD Component into Component Controller first.
And then Create a View and map it to window as U regularly do,
then in Window- Explore the tree until that View, now open Context Menu for Embed View Option and from the scroll U get search for that WD Component U wanna Embed.
U also have to handle Plugs here, Because the result application required some parameters to be passed that U do from ur first application by passing those values through Plugs.

"Build.xml file not exist"

Hey Guys,
i am currently involving in a servelet project (RendreX). i want to install apachi ant as a prerequirement. i am using windows 2003 server. I already downloded latest ant version and apache tomcat4.0. Also i have set all the class path,ANT-HOME(C:\ANT) and other relevent paths. But when i run ant command in the command prompt(C:\ANT>ant)will generate error state that "build.xml" file can't be found. Have i done any wrong thing here? Can anybody give a way that i can easily install apache ant on winows.
It would be greatly appriciated if u can send me some advice to over come this problem.
Best Regards
Mohan

build.xml is the default build file assumed by ant. You have to provide a build file to control what you expect from ant to do.

Accessign webservice result from another mxml file

HI,
I have an mxml application that uses the <mx:webservice
function to load a wsdl and get some values. I have tested the code
and it works fine and i can get the result and fault methods
correctly.
I would now like to call this service from another mxml file
and use access the result or fault string accordingly.
example scenario would be that when i load my main page, i
would like the lookup values obtained from using the webservice to
be available.
i tried the following but didnt get any luck. Here lookup is
the mxml file which contains the webservice, which i am importing
in this file. GetLookValuesWithAuth is the operation name.
var l:lookup=new lookup;
var s:AsyncToken=l.es.GetLookupValuesWithAuth.send();
s.addResponder(new mx.rpc.Responder(onSResult,onSFault));
public function onSResult(e:ResultEvent):void{
Alert.show("value is");
var xy:XMLList=XMLList(e.result);
lplist=xy.descendants("LOOKUPVALUES");
Alert.show("lookup is
"+lplist.toXMLString()+xy.toXMLString());
public function onSFault(e:FaultEvent):void
Alert.show("Fault is "+e.toString());
An example of the webservice call in lookup.mxml is shown
below
<mx:WebService id="e1" wsdl="{wsdl "
result="resultHandler(event)"
fault="mx.controls.Alert.show(event.fault.faultString.toString())>
<mx:operation name="GetLookupValuesWithAuth"
resultFormat="e4x">
<mx:request>
<databaseName>{database name}</databaseName>
<userName>{username}</userName>
<password>{password}</password>
<lookupID>05855b98-75c7-4117-a91c-db59e9ea0204</lookupID>
</mx:request>
</mx:operation>
Any suggestions?

"amthekkel" <[email protected]> wrote in
message
news:g9ovt2$e63$[email protected]..
> HI,
> I have an mxml application that uses the
<mx:webservice function to load a
> wsdl and get some values. I have tested the code and it
works fine and i
> can
> get the result and fault methods correctly.
> I would now like to call this service from another mxml
file and use
> access
> the result or fault string accordingly.
> example scenario would be that when i load my main page,
i would like the
> lookup values obtained from using the webservice to be
available.
>
> i tried the following but didnt get any luck. Here
lookup is the mxml file
> which contains the webservice, which i am importing in
this file.
> GetLookValuesWithAuth is the operation name.
> {
> var l:lookup=new lookup;
> var s:AsyncToken=l.es.GetLookupValuesWithAuth.send();
> s.addResponder(new
mx.rpc.Responder(onSResult,onSFault));
> }
>
> public function onSResult(e:ResultEvent):void{
> Alert.show("value is");
> var xy:XMLList=XMLList(e.result);
> lplist=xy.descendants("LOOKUPVALUES");
> Alert.show("lookup is
"+lplist.toXMLString()+xy.toXMLString());
> }
>
> public function onSFault(e:FaultEvent):void
> {
> Alert.show("Fault is "+e.toString());
> }
>
> An example of the webservice call in lookup.mxml is
shown below
>
> <mx:WebService id="e1" wsdl="{wsdl "
result="resultHandler(event)"
I have no idea about web services, but it seems to me you
should have a
closing curly bracket in the wdsl property.
HTH;
Amy

How can i call a servlet from a servlet ?

Hello,
Can i call a Servlet from within a Servlet ?
and is it "right thing" to Do ?
Thanks

JMO, but I wouldn't do it like this.
Don't have a remote object like a servlet doing database queries for your app. That will mean TWO network hops for every query if the database resides on another machine. The network is the biggest bottleneck you've got.
Write a JavaBean that does the database stuff for you and just have the first servlet instantiate it when it needs it. A Bean has a better chance of being reused, too. Write a TableGateway or DAO for your object.
Or write an EJB to do it.
The only time I've done a servlet-to-servlet connection like that was for one servlet running in a DMZ that would authenticate a user and then forward the request to another servlet running inside the second firewall.
I wouldn't encapsulate database query logic in a servlet like that. JMO - MOD

How can I call a function from a procedure

I have a function named: f_calc_value which return the variable v_result. This function is part of a package.
How can I call this function from a new procedure I am creating?
Thanks

or refer this theread....calling function from procedure

How can I call a RFC from dynpage ?

Hi!
I would like to know how can I call a RFC from a Portal aplication, dynpage or jspdynpage. there include some libraries ?
any idea?
thanks

for deploying SAP Jra :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4#search=%22how%20to%20use%20jca%20sapjra%20site%3Asap.com%22
For lookup of SAP Jra use:
com.sapportals.connector.connection.IConnectionFactory connectionFactory =(IConnectionFactory) initctx.lookup( "deployedAdapters/SAPFactory/shareable/SAPFactory");
Using SAP Jra
http://help.sap.com/saphelp_nw04s/helpdata/en/47/13044258bdd417e10000000a1550b0/content.htm
The important jars required are:
connector.jar
Genericconnector.jar
prtjndisupport.jar
Thanks

How can i call a zreport from my bsp page.

Hi friends,
How can i call a zreport from my bsp page.
Moosa

Hi Friend,
These are the codings to be wirtten in BSP for transferring values to the REPORT
DATA:wf_date TYPE ztable-ID.
      data:seltab type standard table of rsparams,
       wa_seltab like line of seltab,
     event TYPE REF TO if_htmlb_data.
DATA:p_value TYPE REF TO CL_HTMLB_INPUTFIELD.
event = cl_htmlb_manager=>get_event( runtime->server->request ).
p_requ ?= CL_HTMLB_MANAGER=>GET_DATA(
                                        request = runtime->server->request
                                        name     = 'inputField'
                                        id       = 'i1'
if p_requ is not initial.
wf_date = p_requ->value.
endif.
clear wa_seltab.
if wf_date is not initial.
wa_seltab-selname = 'P_REQU'.
wa_seltab-kind = 'P'.
wa_seltab-option = 'EQ'.
wa_seltab-low = wf_date.
append wa_seltab to seltab.
endif.
submit *ZSAMPLEAP1* with selection-table seltab AND RETURN .(ZSAMPLEAP1 refers to the report name and AND RETURN for coming back to the BSP page after the completion of its operation in Report )
IMPORT int_name TO int_name FROM MEMORY ID '*zid*'.(For importing the obtained value from Report)
In Report
REPORT ZSAMPLEAP1.
SELECT-OPTIONS: p_requ FOR ztable-id NO INTERVALS.
SELECT SINGLE name from ztable into int_name WHERE id = p_requ-low.
WRITE:int_name.
    EXPORT int_name TO MEMORY ID 'zsharmila'.
With Regards,
SHARMILA BRINDHA.M

Can I call a function from a dll in LabVIEW that returns:double*string and int.?

I have a function from a dll that return a double* string and an integer. How can I call this function from LabVIEW? There is a possibility to work in LabVIEW with a double* string?

pcbv wrote:
> Hello all, The header of the function is:
>
> "HRESULT WRAPIEnumerateDevices(WRAPI_NDIS_DEVICE **ppDeviceList, long *plItems);"
>
> where WRAPI_NDIS_DEVICE have this form:
>
> typedef struct WRAPI_NDIS_DEVICE { 
> WCHAR *pDeviceName; 
> WCHAR *pDeviceDescription; }
> WRAPI_NDIS_DEVICE; 
>
> The function is from WRAPI.dll, used for communication with wireless card.
> For my application I need to call in LabVIEW this function.
Two difficulties I can see with this.
First the application seems to allocate the array of references
internally and return a pointer to that array. In that case there must
be another function which then deallocates that array again.
Then you would need to setup the function call to have a pointer to an
int32 number for the deviceList parameter and another pointer to int32
one for the plItems parameter.
Then create another function in your DLL similar to this:
HRESULT WRAPIEnumExtractDevice(WRAPI_NDIS_DEVICE *lpDeviceList, long i,
CHAR lpszDeviceName, LONG lenDeviceName,
CHAR lpszDeviceDesc, LONG lenDeviceDesc)
if (!lpDeviceList)
return ERROR_INV_PARAMETER;
if (lpDeviceList[i].pDeviceName)
WideCharToMultiByte(CP_ACP, 0,
pDeviceList[i].pDeviceName, -1,
lpszDeviceName, lenDeviceName,
NULL, NULL);
if (lpDeviceList[i].pDeviceName)
WideCharToMultiByte(CP_ACP, 0,
pDeviceList[i].pDeviceDescription, -1,
lpszDeviceDesc, lenDeviceDesc,
NULL, NULL);
return NO_ERROR;
Pass the int32 you got from the first parameter of the previous call as
a simple int32 passed by value to this function (and make sure you don't
call this function with a higher index than (plItems - 1) returned from
the first function.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Can ant call a target from my build.xml from another xml file?

Similar Messages

Maybe you are looking for