Can I change the color of an image to a specific color code?

Since I was unable to do this in Photoshop, I was wondering if there was a way in Flash to simply change the color of an image to a speciifc color code. The image is more or less a simple line with rounded corners. It is only composed of 1 color. Does anyone know if it can be done with Flash?

Shouldn't be a problem to do it in Photoshop or Flash. Since you couldn't do it in PS, I'm guessing that there is more to it than you are making obvious here.
But in Flash you would import it, make it into a movieclip or graphic. Then apply a tint from the color effect portion of the properties panel.

Similar Messages

How can i change the DPI of an image to 400 in illustrator?

I'm very stuck with trying to change the DPI of an image to 400 so that it is ready to print and the resolution will be fine once printed but i have no idea how to do this in illustrator?

dpi,
If you are talking about a raster image placed in Illy, you can only change the size to get the desired PPI/DPI.
If you are talking about raster effects or a raster image created in Illy, you may set the desired resolution of raster effects, or the desired resolution or total pixel x pixel size of the exported/saved image.
If you are talking about pure vector artwork, the resolution depends on your printer (driver) (settings), as Doug said.

How can I change the view of an image

Hi!! I want to ask if anybody know how to open a document from a content area not with the explorer, but with another image viewer.
Thanks in advance!!

dpi,
If you are talking about a raster image placed in Illy, you can only change the size to get the desired PPI/DPI.
If you are talking about raster effects or a raster image created in Illy, you may set the desired resolution of raster effects, or the desired resolution or total pixel x pixel size of the exported/saved image.
If you are talking about pure vector artwork, the resolution depends on your printer (driver) (settings), as Doug said.

I need to replace a color on my image with a specific color from another part of the image. How?!

I have spent over 2 hours trying to figure out how to replace a color on one part of my image with a specific color shown on another part of the image. So far I have been able to go to "Replace Color" on my Adobe Photoshop version, but it seems that I can only change the hue and brightness of the color that it currently is. I need to use a specific color so this does not help me. Does anyone know how to complete the task I am referring to?
Also, please keep in mind that I am using Adobe Photoshop 6.0, not a fancy cs version or anything. So it's pretty old school...
Any help/feedback is greatly appreciated! Thank you.

Hi brookehelene,
You might consider making a selection the object and using a color fill layer set to the color blend mode instead of replace color.
I used the same picture as kendallplant did and changed the color on the same flower by sampling the pink color from the flower to the right)
(click on the screenshots below for larger views)
1. Select>Color Range
   (i used color range because the dialog is somewhat similar to the replace color dialog, except one is making a selection instead of replacing a color)
   (there are many other ways to make the selection such as the magic wand, so if your more familar with the other selection tools you can use those instead to make your selection)
2. Use the eyedroppers and fuzziness slider in the color range dialog to make the selection of the object.
   (in the screenshot below the white areas are selected and black areas are not)
   (your selection probably won't be perfect, but you can paint on the layer mask to refine the selection)
3. After you press the okay in the color range dialog you'll see the selection (marching ants)
   At the bottom of the layers palette press the Create New Fill or Adjustment Layer icon
   to reveal a list and choose Solid Color.
   Then use the eyedropper to sample a color from your image and press ok.
   Change the Blend mode for the color fill layer to Color (top of the layers palette)
4. As you can see a lot has been selected besides the flower.
    To refine the areas of color, paint on the layer mask with the paintbrush tool.
    Use white to add the color or black to subtract the color
    You can press the D key on the keyboard to get the default colors (black and white) in the toolbox
    and press the X key to switch between the two when painting on the layer mask.
Even though the above takes longer you can easily change the color or modify the areas that you want to change the color on.
To change the color you can double click on the color fill icon in the layers panel.
You can also use other layer blend modes besides color such as hue, so you might try some of the others and see what they do.

How to I change the hue of a graphic to a specific color

I have a graphic for external links that I will be using on my web page. It is composed of various shades of blue with one dominant color of blue. I would like to change the hue of that graphic to match the colors of my web page. For example, I want that dominant shade of blue to become #bd0000. While I can use the hue slider to change the color, how do I make that dominant blue be exactly #bd0000?
Thanks,
Mike

There are a couple ways to do this, one with L*A*B* mode, the other with a channel mixer adjustment layer. Here's what I did with the channel mixer:
Your target color of #bd0000 has a RGB value of around 189r, 0g, 0b.
I put a color sample point on your blue and one on pure white.
I added the channel adjustment layer then adjusted each of the channels so that the blue color shifted to your desired color and so that the white remained white. This meant taking the blue slider in each of the channels and adjusting your blue to match the red color. This will make the white go off. So then I adjusted the color slider of the same color as the channel to clean up the white. If you have other colors this might get weird and you might have ot select just the blues with a mask. Here's a screen shot with my settings.

Can you change the colour of an 'image' bounding box?

This concerns bounding boxes not 'strokes'.
Is it possible to customise the default colour of a bounding box around an image?
I know that the default 'rectangle image frame' matches the Layer colour (eg: Layer 1 - Light Blue, with an the image bounded by a brown box) which is easily changed by moving it to another layer (eg: Layer 2 - Red, which displays an image bounding box of Cyan). What defines the colour of the bounding box of an image that is placed inside the 'rectangle image frame' and can it be changed?
I have no real necessity to change it, I just wondered if it was possible?
Steve

I'm not sure you understand the terminology.
The bounding box is an imaginary rectangle that encloses the shape of an object or group of objects. For a simple graphics frame this is the same size and shape as the frame and is poisitioned on the frame edge (and it's what you see when you select the frame). The bounding box is used for calculating object positioning. When dispalyed, it takes on the color assigned to the layer.
The frame edge is also fictitious. It's a screen display aid that can be tuned on or off to help you locate objects and also uses the color assigned to the layer. It corresponds to the path that describes the edge of the frame, so might not be rectangular (a bounding box is always rectangular).
The stroke is an attribute assigned to the path describing the perimeter of a closed object or the path itself of an open path. Stokes can be assigned a weight, color, and stroke style such as dotted or striped.
An image placed inside a frame has it's own bounding box, but not a frame edge or stroke. To see the image bounding box use the direct select tool to select the image inside the frame. If you crop an image so it is larger than the containing frame, or or enlarge the frame so the image does not completely fill it, you can see the differnce between the bounding boxes very easily. The color of the image bounding box is also tied to the layer color and is not editable by the user.

Can I change the bit depth on images in pdf files?

I have a lot of pdf files that were scanned in 24 bit colour. I'd like to convert some of them to greyscale or black and white, and reduce the resolution to make them smaller.
I can see how to reduce the resolution with Save As Other/Optimized PDF, but there are no options there to reduce bit depth. Is there any way to do this?

Thanks, I think I've worked out how to use them. I found a fixup called "Convert color to B/W", but it seems to convert to greyscale, not black and white.
I found this page describing how to convert to both greyscale and monochrome. It says the only way to do monochrome is to convert to tiff first:
http://blogs.adobe.com/acrolaw/2009/10/converting-color-pdf-to-greyscale-pdf-an-update/
If that's the case then Acrobat Pro isn't going to help me, but that was written in 2009. Does anyone know if true black and white conversion has been made available since then?

How much can I change the size of this image?

I want to print an image using an online sevice and the attached image shows the dimensions. I'm VERY new to Photoshop and want to know if I can just enter a larger size into the fields to print it at say, 8.5 x 11 and, if so, do I need to do anything else to prepare the image for this?
Thanks!

Ditto what Noel mentions, but your quality of enlargement will depend as well on the native format of the image. For example, you would get a better enlargement result if your original file as a TIFF and not so good if you are working on a JPEG due to the lossy compression.
While getting to Letter size might be a challenge you might get a good print by resampling at between 150ppi and 200ppi but you would need to make some test prints to see what would be an acceptable image. At 150ppi you would get an image around 10"x6" and at 200ppi the image would be around 7.7" x4.6"
Hope this helps
Mike

How can I change the standard (low-contrast) grey-on-grey UI colors?

... not the windows backgrounds in Edit>Preferences, but the fonts in the panels etc.

What you see in Preferences is what you have available. There is nothing more.

Change the iconbutton to another image when it unable?

I want create some State-sensitive iconbuttons in my script.
But I can's change the iconbutton to another image when it unable?
It's mean: When I click one of the iconbuttons,it convert to unable and auto change to another image.
This are some code of under.
Sorry of my BAD English.
Thank very much!
    //config iconbutton's different iamges.( _a is the normal image,_b is the unable image. )
    //I don't know which is the right way, or all wrong.
    var icon1 = {a:File("\icon\Icon_M1a.png"),b:File("\icon\Icon_M1b.png")} ;
    var icon1x = {a:"./icon/Icon_M1a.png",b:"./icon/Icon_M1b.png"} ;
    //BuildUI by under format.
    //My UI code is very complex, under is some line of it.
    Pleft: Group    { \
          orientation:'column', alignment:['left','fill'], margins: 0, spacing: 0, \
          grmm1: Group { margins: 0, spacing: 0, \
                        MBtn1: IconButton { text:'',preferredSize: [32, 32],image:("+icon.a+","+icon.b+")} \       //ERROR!! I don't know the right way.
                         MBtn2: IconButton { text:'',preferredSize: [32, 32],image:'./icon/Icon_M2a.png' } \
                          MBtn3: IconButton { text:'',preferredSize: [32, 32],image:'./icon/Icon_M3a.png' } \\
    //Unable the iconButton when mouse click.
    ...MBtn1.onClick = function () {
              this.enabled = false ;
              ...MBtn2.enabled = ...MBtn3.enabled = ture ;

I want create some State-sensitive iconbuttons in my script.
But I can's change the iconbutton to another image when it unable?
It's mean: When I click one of the iconbuttons,it convert to unable and auto change to another image.
This are some code of under.
Sorry of my BAD English.
Thank very much!
    //config iconbutton's different iamges.( _a is the normal image,_b is the unable image. )
    //I don't know which is the right way, or all wrong.
    var icon1 = {a:File("\icon\Icon_M1a.png"),b:File("\icon\Icon_M1b.png")} ;
    var icon1x = {a:"./icon/Icon_M1a.png",b:"./icon/Icon_M1b.png"} ;
    //BuildUI by under format.
    //My UI code is very complex, under is some line of it.
    Pleft: Group    { \
          orientation:'column', alignment:['left','fill'], margins: 0, spacing: 0, \
          grmm1: Group { margins: 0, spacing: 0, \
                        MBtn1: IconButton { text:'',preferredSize: [32, 32],image:("+icon.a+","+icon.b+")} \       //ERROR!! I don't know the right way.
                         MBtn2: IconButton { text:'',preferredSize: [32, 32],image:'./icon/Icon_M2a.png' } \
                          MBtn3: IconButton { text:'',preferredSize: [32, 32],image:'./icon/Icon_M3a.png' } \\
    //Unable the iconButton when mouse click.
    ...MBtn1.onClick = function () {
              this.enabled = false ;
              ...MBtn2.enabled = ...MBtn3.enabled = ture ;

How can I change the color of interactive image label box background.

Interactive image labels are a bit overwhelming in appearance. Can I change the label background color or make it partially transparent? I have tried several things and looked this up on Lynda.com training but no info.

don't know how much this might help but you can change some colors using the Inspector as follows:
from the text menu you can control paragraph and character colors, from the text menu you can control the text color.
hope this helps...

How can we change the color of the image for product display for different

Hi All,
How can we change the color of the image for product display for different colors, to be displayed on site.
jeff

Hi priya,
The requirement that you have stated is not a standard feature in ISA CRM. In order to do the same, you will need to modify the standard ISA code in Java. A common path for the solution would be as follows:
1. Colours
    a. Maintain a text type for Color under the object - PCAT_ITM in Customizing.
    b. Modify the standard search of ISA to search within your new text type as well. (In standard it only searches in Description.
   c. Maintain all shirts colour data in the new type created in step a.
   d. Your requirement will be done!
2. Price
a. Use list prices for your shop and assign the appropriate condition type, acces in your catalog.
b. Modify the standard search of ISA to search on the list prices as well.
c. This too will be done!
3. Accessories - This is very tricky, and will require some exploration. However, here's my opinion,
a. Search for the standard function module, which will return the accessories when provided the product as an input.
b. Modify this function module according to your requirement and ensure that it can be accessed remotely.
c. Modify the JSP as in steps 1b and 2b above to call this new remote-enabled function module.
d. Now you're done!!
The ISA modification part is not so simple, you need a really good guy like "Sateesh Chandra" who'll be able to handle your requirements. This is all I could manage, hope it is some help to you!
Thanks & Regards,
Nelson.

How can I change the background color of my podcast's iTunes page?

My RSS feed just got accepted but now I need to customize the title, author, background color, and logo of my site. Does anyone know how to do this? Thank you!

You can't change the background colour - it's white for audio and black for video. The other data can be changed by changing the appropriate tag in the feed, or if you're using a program or online service to make your podcast,. wherever they provide for entering this information.
The title is carried in the 'title' tag; the author in the 'itunes:author' tag, and the 'podcast image' which appears on the Store page in the 'itunes: image' tag. Republish the feed after making the amendments: it will take a couple of days for the new data to appear, though the image may take several days.
The image which appears in some podcasts in the bottom left-hand corner of iTunes when subscribing is not referenced in the feed but has to be actually embedded into the media file: please see this page:
http://www.wilmut.webspace.virginmedia.com/notes/coverart.html
You may find this general page on making a podcast helpful:
http://rfwilmut.net/pc

How can I change the color of a box in book layout?

I am try to change the color of a photo box when making a book.
Will the box print? and if so how can I change the color
Thank you
Mark

The box will print... but there is no way to just assign a color to a box. The closest you can get is ot create a small solid colored image in Photoshop and assign that to the box. You may get a resolution warning but as long as it's a solid color it does not matter how few pixels you have.

How can i change the color of the graph in agreement of the program's condition

Hi,
I am using labview 5.1 in my graduation's project final. (sorry by my english, but i am ina hurry)
How can i change the color of the graph in agreement of the program's condition?
I am developing a VI to control the temperature of termistors,but i have another sensor too.
In a graph i have the situation of the termistors,but i want to change the color of the graph when the sensor is active.
Thanks a lot
Rafael Wajnsztajn - Brasil

To change the color of the line itself, you can use the attribute Plot>>Plot Color.
To change the color of the points, you can use the attribute Cursor>>Cursor Color.
To select the color, you should have a color box constant inside the Numeric>>Additional Numeric Constants palette.
This is all in LV 7.0. I'm not sure how it similar it is in 5.1.
One important thing is to place the attribute node inside a case structure which will execute only when your condition has been filled.
If this didn't help you, I suggest you post the relevant piece of code, or at least an image of it (no BMPs, please).
Try to take over the world!

Can I change the color of an image to a specific color code?

Similar Messages

Maybe you are looking for