Can i change the value of the discrete states in EMI_CB_CalculateResetStates?

can i change the value of the discrete states in EMI_CB_CalculateResetStates?
The help of LabVIEW said that calculates the values to which to reset the states of an external model in it.But it didn`t said how to reset the discrete states in it.EMI_GetNextDiscreteStates said it can be called only within the EMI_CB_CalculateDiscreteStates function.So if the discrete states can be reset in EMI_CB_CalculateResetStates,how to do it?
THX

What is EMI_CB_CalculateResetStates? If I knew what you were asking about I could give a little more inteligent answer.
Kelly Bersch
Certified LabVIEW Developer
Kudos are always welcome

Similar Messages

Can I change the rollover state of a placed photograph?

I simply want to be able to have a series of separate single, small photographs with descriptions below them and when someone moves their mouse over the photograph I would like it to display a larger version of that photograph on the same screen. Then, when they move their mouse away, the larger version of the photograph disappears.
I thought it would be configured in the rollover state of the image, but I must be doing something wrong. I have placed and resized a photograph on my site. I placed it, then resized it to basically a 1.5" w x 2.25" h. I have tried to change to the rollover state for the image and then hyperlink to a larger size of that image but it seems to hyperlink all of the states. And, if previewed, the mouse pointer becomes a hand, and when you click on the image it opens a new tab and displays the image there -- eventhough the box is not checked to open link in new tab.
Help! Is there a way to accomplish this?

Ok I did this on my site for one of my clients.
What you do is set a lightbox composite. Enable the thumbnails and on the options set the events to rollover.
Resize your thumbnails to desired size.
Hide the enlarged picture of the light box. Now when you hover over iton preview on muse you should get the effect. Make sure to just have the hero image of the lightbox image no fill that would normally happen when you select the image and your window would dim out.
Hopefully that helps you if not ill be on tomorrow and will post my finished site so you can see the effect and verify if its what you asked for.
Good Luck!
Edit: http://sanantoniorestaurant.businesscatalyst.com/index.html Link to my client's site, on the bottom half, Specials, hover over the images.

How can I change the state for normal. All I get is a question mark.

I can't change the normal state for my site. The button for color of text for the normal state is a question mark. Is there a way to reset this?

Thanks. I am trying to change the appearance of a hyperlink on a web page. Specifically, I want to change the default text color from blue to another color. I can change the color for the other states of the hyperlink (rollover, etc.) but the attempt to change the normal state of the hyperlink is unsuccessful because the color box for that state is a question mark. Bill

Can you change the value of a variable that is reset by a parameter?

Sorry if this is simple but I just crashed a package and can't do an autopsy. I suspect I sent it into an infinite loop. I know you can't change the value of any passed in parameters. What I tried to do was have the parameter set the value of a variable
and then I tried to change the value of the variable. Is that even allowed?
I was trying to do this:
MyCheckVariable = MyParameter (which equals true)
(some cool stuff happens)
MyCheckVariable = False
I hit F5 and my package turned into the Energizer Bunny. Is the way I try to reset the variable the culprit?

This is a prototype so I just created a project parameter and set it to true. In the real world the parameter will be used to control an optional part of the process because on a re-run after error that part doesn't have to be ran again.
So when I say MyCheckVariable = MyParameter (which equals true) in reality what I actually have is in the variables window I'm using an expression and it looks like this in the variables window
name = runDownload
Scope = Package
Data Type = Boolean
Value = True (but greyed out)
Expression = @[$Project::param_runDownload]

How can I change the value used in a Criteria Rule in a Subscription agent

Dear mobile heroes.... How can I change the value used in a Criteria Rule in a Subscription agent in a quality environment? (CRM 70 SP04).
I have built a subscription agent in dev, which uses a static where clause to filter activity_object on VKORG. I need to filter on a different VKORG value in the quality environment, but when I change the value of the sales org, the change is not saved. I have tried this even non 'activated' subscription agents, but it still does not appear possible to change and save the changes.
This poses a big problem because the VKORG value I want to use does not even exist in the dev environment, so I could not even rebuild in dev and transport the new agent to quality. Can anyone help me?

Too old to care now.

Can not change the control level of item attribute "Inventory Asset Value"

I can not change the control level of the item attribute "Inventory Asset Value" from Master Level to Org Level. It's show me the message "FRM-40200: Field is protected against update".
Version is below:
Oracle Application: 10.7SC
Form: INVIDCTL 6.0.26

I did a trace when I chage the control level. the SQL is below:
SELECT COUNT(*)
FROM CST_ITEM_COSTS CHILD
, CST_ITEM_COSTS MASTER
WHERE MASTER.INVENTORY_ITEM_ID = CHILD.INVENTORY_ITEM_ID (+)
AND MASTER.COST_TYPE_ID = 1
AND CHILD.COST_TYPE_ID (+) = 1
AND NVL(MASTER.ITEM_COST,0) != NVL(CHILD.ITEM_COST (+) ,DECODE(MASTER.ITEM_COST, NULL ,0,-99999))
AND MASTER.ORGANIZATION_ID IN (SELECT MASTER_ORGANIZATION_ID
FROM MTL_PARAMETERS
WHERE ORGANIZATION_ID != MASTER_ORGANIZATION_ID )
AND CHILD.ORGANIZATION_ID IN (SELECT ORGANIZATION_ID
FROM MTL_PARAMETERS
WHERE MASTER_ORGANIZATION_ID = MASTER.ORGANIZATION_ID )

Can we change the value of rating in assignment, performance screen oracle

can we change the value of rating in assignment, performance screen of oracle hrms?
If we can change the value, how we will do it?
I am using hr_perf_review_api to update the value but this value is getting update in the base table...
Please help me out on the same...
Thanks in advance...
Ajaykumar

Hi Mohammed,
afaik , it is not possible in current version.We can place an Idea in idea place.
But , we have weight to assign 1 to 100 and score is to 1 to 10.

Can you change the value of app_user?

can you change the value of app_user?

Hi Scott,
Thanks for being patient.
A lot of the reports are based on personal information tied to the username. so on my reports I use app_user to pull the information. the app is a production app so when problems arise a lot of the time is user error but the users are in some other state so i need a way to look at the same thing they are looking at. I need to be able to sign in as them but since the app uses sso they cannot give me their corporate passwords. when i changed the value of g_user it changes but only for the scope of the region that i changed it in. it does not persist for the session.
Thanks Fernando

How can I change the value of "colorscheme" parameter at runtime?

Hello all
Can I change the value of colorscheme at runtime ?
This parameter can be config in formsweb.cfg file.
I want to put this colorscheme as "User Preferences" in my application.
Please help me if some one knows how to achieve this.
From
Chirag Patel (Nairobi)

Hi,
Try the following. This might help you.
Edit you Formsweb.cfg file with following code (add the code to your file):
[look1]
separateFrame=True
lookandfeel=Generic
[look2]
separateFrame=True
lookandfeel=Teal
[look3]
separateFrame=True
lookandfeel=Khaki
and save your file.
Now, when you call your form in the address bar look for " ? ". After " ? " add config=look1 now your form will take Genric look & feel.
or
config=Teal now your form will take Teal look & feel.
That's how you can change the look & feel at run time.
Hope that you understand what i want to say......

Can I change the values of parameters without bringing database down.

Hi All,
Is database need to be restarted if these parameters value is changed. Can I change the parameter values without restarting the database.
--> pga_aggregate_target
--> memory_target
--> streams_pool_size
--> sga_target
Thanks !

Ven wrote:
Hi All,
Is database need to be restarted if these parameters value is changed. Can I change the parameter values without restarting the database.
--> pga_aggregate_target
--> memory_target
--> streams_pool_size
--> sga_target
Thanks !These are all dynamic parameters and thus can be changed without requiring the db to be down. That said, please check the oracle documentation to know about such things. Here is the link to the documentation, http://tahiti.oracle.com .
HTH
Aman....

How can i change the column label text in a alv table display

how can i change the column label text in a alv table display??
A similar kinda of question was posted previuosly where the requirement was the label text was needed and following below code was given as solution :
* declare column, settings, header object
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
DATA: lr_column_header type ref to CL_SALV_WD_COLUMN_HEADER.
get column by specifying column name.
lr_column = lr_column_settings->get_column( 'COLUMN_NAME1' ).
set Header Text as null
lr_column_header = lr_column->get_header( ).
lr_column_header->set_text( ' ' ).
My specific requirement is i have an input field on the screen and i want reflect that value as the column label for one of the column in the alv table. I have used he above code with slight modification in the MODIFYVIEW method of the view since it is a process after input. The component gets activated without any errors but while run time i get an error stating
"The following error text was processed in the system CDV : Access via 'NULL' object reference not possible."
i have checked in debugging and the error occured at the statement :
lr_column = lr_column_settings->get_column( 'CURRENT_YEAR' ).Please can you provide me an alternative for my requirement or correct me if i have done it wrong.
Thanks,
Suri

I found it myself how to do it. The error says that it is not able to find the reference object i.e it is asking us to refer to the table. The following piece of code will solve this problem. Have to implement this in WDDOMODIFYVIEW method of the view. This thing works comrades enjoy...
DATA : lr_cmp_usage TYPE REF TO if_wd_component_usage,
 lr_if_controller TYPE REF TO iwci_salv_wd_table,
 lr_cmdl TYPE REF TO cl_salv_wd_config_table,
 lr_col TYPE REF TO cl_salv_wd_column.
DATA : node_year TYPE REF TO if_wd_context_node,
 elem_year TYPE REF TO if_wd_context_element,
 stru_year TYPE if_alv_layout=>element_importing,
 item_year LIKE stru_year-i_current_year,
 lf_string TYPE char(x),
DATA: lr_column TYPE REF TO cl_salv_wd_column.
DATA: lr_column_header TYPE REF TO cl_salv_wd_column_header.
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
Get the entered value from the input field of the screen
node_year = wd_context->get_child_node( name = 'IMPORTING_NODE' ).
elem_year = node_year->get_element( ).
elem_year->get_attribute(
 EXPORTING
 name = 'IMPORT_NODE-PARAMETER'
 IMPORTING
 value = L_IMPORT_PARAM ).
WRITE L_IMPORT_PARAM TO lf_string.
Get the reference of the table
lr_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
 lr_cmp_usage->create_component( ).
ENDIF.
lr_if_controller = wd_this->wd_cpifc_alv( ).
lr_column_settings = lr_if_controller->get_model( ).
get column by specifying column name.
IF lr_column_settings IS BOUND.
 lr_column = lr_column_settings->get_column( 'COLUMN_NAME').
set Header Text as null
 lr_column_header = lr_column->get_header( ).
 lr_column_header->set_text( lf_string ).
endif.

How can I change the default web form names?

I'm using the web forms in Business Catalyst, but our web site is in Norwegian, so I want the default FirstName and LastName values to be displayed in Norwegian in the error message when the field is not filled out.
At the moment the user will get an error saying "Skriv inn First Name". "Skriv inn" is correctly translated from English to Norwegian, but the value "First Name" has to be changed. The same applies for "Cell Phone Number".
Also, I don't really want two fields for the name, I want the form to have just one field that is called "Name" or "Navn" in Norwegian.
I have tried deleting the name fields and replacing them by custom fields, but then I get an error message when the form is sent saying "ERROR: An error occurred. Your web form must capture customer name and email address. Please fix this issue and re-insert your web form on your web page."
Also, why does some of the "-" before the error have a space, and some not? I want all the errors to be displayed with a space between the dash and the error.
The e-mail error is automatically translated into Norwegian for some reason, but it should be a dash in there, so it says "e-postadresse" and not "epostadresse".
Is there anywhere I can customize these error messages? Or at least change the values of the English fields to Norwegian so the error messages display the Norwegian field names, and not the English?

That is very helpful! Thank you!
But how can I change the dashes that are shown before the error? It really annoys me that they are shown inconsistently with different spaces like this:
- Error 1
-Error 2
- Error 3
-Error 4
And is there any way to change the automatic translation from English to Norwegian?

How can we change the purchasing group which it is maintained in R/3?

Hello All.
In case of MM, purchasing group is assigned to material master.
It means purchasing group is maintained based on material code.
But SRM has different maintenance level.
As you know that purchasing group has the responsibility based on material group (Product category).
So we should change the purchasing group from R/3, when end user create shopping cart.
How can we change the purchasing group which it is maintained in material master?
Thank you,
Best regards,
SH.

Hello So Hee,
I am not a technical guy.
But for your requirement i am building a logic.
I am not sure whether it will work.
You need to check with your ABAPER.
It is as below:
When the SC is approved and the other configuration is correct ,
PR is created in ECC by the virtue of BAPI.
You want that the pur grp should be populated on the base of matl code and not on matl grp.
Hence in SC you will not fill up pur grp.
In the programme for BBPSC01 i.e. SC creation you will add modification that it will call a custom FM.
This custom FM will get the matl code from SC and will find the value of pur grp from R/3 MM01i.e. matl master(you may get in MARA).
Now in the BAPI you need to incorporate this additional value of yr pur grp field.
So the desired pur grp as per yr R/3 matl master will be populated in yr R/3 PR.
Again: this is all hypothesis.
That's all I can help you.
BR
Dinesh
Reward if helps

Assets panel styles, can i change the color of a style to be an exact color?

Assets panel > styles, can i change the color of a style
to be an exact color? for example, if i want to create a navbar
with the black and gray glass affect style, but i want to change
the color but keep the same style of shading. each style in the
assets panel has a default color, but i want to change the color
and keep the style. i did change the color a little bit by
adjusting the hue and saturation, but i can't seem to get an exact
match of the color i am trying to duplicate. any help is greatly
appreciated thanks

When a style is applied to any object, the Properties panel
at the bottom will reflect the attributes which are editable in
that applied style. The properties which can be edited are fill and
stroke colors also apart from adjusting the Hue and Saturation.
Gradient colors can be modified by changing the fill color.
The nodes in the gradient will change the color from blue to black
or any other intended color of change. If you know the color you
can either enter it as a 6 digit value or you can pick a color from
an existing object.
Hope it helps. Let me know I am missing you query
completely.

HOw can i change the color of a cell

How can I change the color of a cell when it is selected. I select the cell by pressing enter, then I want the text in the cell to change color to red, but all the cells in the table change color. Please I would be grateful for some help

Subclass DefaultTableCellRenderer.
public class MyCellRenderer extends DefaultTableCellRenderer
Override
public Componet getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column)
JLabel lab = new JLabel(String)value);
lab.setOpaque(true);
return lab;
if(isSelected)
lab.setBackground(Color.red);
else
lab.setBackground(Color.white);
Set the columns in your table:
table.getCoulumModel.getColumn(0).setCellRenderer(new myCellRenderer());
table.getCoulumModel.getColumn(1).setCellRenderer(new myCellRenderer());
etc. for each column in your table.

Can i change the value of the discrete states in EMI_CB_CalculateResetStates?

Similar Messages

Maybe you are looking for