Can I convert many XMLs into one Excel Sheet?

Hi:
I get 20-30 XMLs daily from client and I want them all converted and merged in single excel sheet through AppleScript. Can any one help?
Thank you.

Similar Messages

Can I convert each playlist into one single mp3 file

I have had great success creating and burning a playlist to a CD however I'd really prefer to save an ENTIRE playlist of about 20 songs as a SINGLE MP3 file. I can then I burn each file (composed of songs in a playlist) to a CD and have a nice set of organized music set/PLAYLISTS to listen to. I stated my question in this manner because I've seen many similar questions but they are not what I am asking. I am using WIndows 7
What I have tried:
1.) ...selecting the group of songs within the playlist and exporting as an MU3. My results: It created an MU3 file that played for less than 1 second when played in anything other than itunes. In itunes it opened as the same playist I began with
2.) ...consolidating the files (the goal was to consolidate into one MP3 file) but once I selected the consolidate option I could not find that file under itunes Media which is the location where itunes says it would be stored.
3.) ..converting to MP3 Result: It just converted each individual file to MP3 format and NOT the entire list as a SINGLE MP3 file.
Does anyone know if there is a way to accomplish this?
Thanks in advance
D

Sorry to disappoint you, Chris... but I don't "take their product". Someone WHO WORKS FOR THEM "gives it to me". There's a MAJOR DIFFERENCE between someone handing you something that's theirs to hand you... and stealing it.
In 2006 I saw Sara Evans "perform" in Tucson. She flew on her congressional (then) husband's private plane from Portland to Orange County, refueled and flew to Tucson, where she got into a limo, and rode to the show. She got out of the limo, went straight backstage, I saw someone hand her a Dr. Pepper, which she opened, took a sip out of, and then went out on the stage as the headline act for the evening. She sang six (6) songs in twenty-three (23) minutes, walked offstage, did no encore, and got back in the limo, which whisked her back to the waiting jet to fly home.
The station manager of the radio station that sponsored the concert, later told me that she was paid $125,000 for that twenty-three minutes. Even he felt like the station didn't get their money's worth. The promoter paid for the jet fuel and her pilots' salaries.
In 2009, I went out to Phil Vassar's "motor coach" after a show, which is basically a house on wheels. He showed two friends and I the "studio" in the middle of this converted bus, where he can record new tracks and send them straight to the record company via satelite, for their final editing. The front has a full kitchen & living room and a 50" flat screen TV with a massive audio system. HE owns the whole thing, and when he doesn't feel like riding, he has a private plane of his own that will pick him up wherever they can land and fly him to the next show. His promo guy gave each of us a copy of every CD he's ever released before we left.
I have no problem with people making money for their work. But I've seen just how much is given away in the music industry, and I'm not going to refuse things offered to me because someone with a private jet and limo, getting $6000 a minute, or with a half million dollar "rolling house" isn't getting paid for the things their own people are handing out in bulk.

How can i writ many times in one Excel

I have a numbers in open excel,and than i want to compar those numbers to the new numbers, if it same the new number to be writ like the same as showing in excel (Abou55).but my probleme is when i am trying to writ the second number the first number desappear
somone can help me withe sample.
thank you
Attachments:
Abou55.zip ‏66 KB

Your inner loop interates thru all of the elements of the left column and writes the second column with either the new string value if there is a match, or a "" if there is no match. This loop will step on the previous number every time.
Your simplest solution is by enclosing the two nodes Range.Value2 in a case statement and execute it only if the compare is true.
There is also a flaw in the inner loop auto indexing. There will always be only one value in that array. This inner loop serves no purpose and should be removed.
Michael Munroe
Certified LabVIEW Developer
www.abcdef.biz
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

Saving the table content into one excel sheet

Hello,
I have got following problem:
I'm measuring data with a DAQ card. I'm interested in the min and max value of the measured data. Therefore I'm using the Amplitude and Level measurent function. Its no problem to display the results in the graphical interface. What causes me trouble is to save the content of the displayed table into some kind of file. Anybody know a solution?
Thanks!

The problem is that I use the descriped min/max function. If I write it to a text file I get a lot of additional information every second.
Following example shows what is written to the measurement file:
Channels 6
Samples 1 1 1 1 1 1
Date 2010/03/05 2010/03/05 2010/03/05 2010/03/05 2010/03/05 2010/03/05
Time 14:26:48.9938435554504394532 14:26:48.9938435554504394532 14:26:48.9938435554504394532 14:26:48.9938435554504394532 14:26:48.9938435554504394532 14:26:48.9938435554504394532
Y_Unit_Label Volts Volts Ampere Ampere Ampere Volts
X_Dimension Time Time Time Time Time Time
X0 0.0000000000000000E+0 0.0000000000000000E+0 0.0000000000000000E+0 0.0000000000000000E+0 0.0000000000000000E+0 0.0000000000000000E+0
Delta_X 0.001000 0.001000 0.001000 0.001000 0.001000 0.001000
***End_of_Header***
X_Value U_1 (Positive Peak) U_2 (Positive Peak) I_3(Positive Peak) I_1 (Positive Peak) I_2 (Positive Peak) U_3(Positive Peak) Comment
0.000000 3.461911 3.189588 0.115779 2.103480 0.739258 1.206654
This kind of information is not displayed if I visualize it in a table. The table only shows me the time and the corresponding min/max values. These values are updated every second.
I tried to write it to a spreadsheet, this approach was also not successful since a new spreadsheet was opened/generated every second respectively every time a new min/max value was aquired.
I would like to safe the data fro, the table to a file without the additionál information showed above in the example.
Thanks!

Can we combine multiple excel files into one excel file using SSIS?

I have a bunch of excel files in a specified folder. I wanted to combine all the excel files into one excel file by adding additional tabs in one excel file. Can I do this using SSIS?
OR
I know using macro we can combine multiple excel files. Can we run a excel macro in SSIS? Please help me.
Actually the complete package is this:
Step1: Using FTP task I'm downloading the bunch of excel files into a folder.
Step2: Above implementation is the second step that I have to do.

You can do it in two steps
1. First get all data from excel sheets to a sql staging table. For that you need to use a looping logic as explained in below link (you dont required the additional logic used for checking file name etc in below example as you need all files). Also make
source as excel instead of flat file
http://visakhm.blogspot.in/2012/05/package-to-implement-daily-processing.html
2. Once you get the data onto a single table, use below to get it exported to multiple sheets within same excel destination file
http://visakhm.blogspot.in/2013/09/exporting-sqlserver-data-to-multiple.html
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How can i convert my pdf into excel

How can I convert my pdf into excel, the tutorial shows a "content converter" option under the tools section but I do not have that option. I have Acrobat Pro v11.

With Acrobat XI Pro use this click-path:
File - Save As Other - Spreadsheet -
Then select the option desired.
Be well...

Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?

it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
Regards,
Nathaniel
[removed by moderator]

How can I convert page points into document points??

Hello,
How can I convert page points into document points? any API?
I have found 2 APIs
AIDocumentViewSuite::ArtworkPointToViewPoint( ) and
AIDocumentViewSuite::ViewPointToArtworkPoint( )
but I dont know what is view point and art work point.
I think artwork point = page points and view points = document points. am I correct ???

What do you mean by 'document points'? Do you mean document units? Like centimeters or inches? If that, there's no API to do (well, kind of in AIUser.h, but that gives you back a string with a unit suffix). Frankly, its pretty easy to just figure out the conversion values for each type of ruler unit -- there are only five or so you need -- and then write a dinky function that takes a value in one or the other, looks up the current document unit and uses that to convert the value (one function for each way). You just need to figure out everything in terms of points (since pixels == points) -- in that regard, it probably helps to know that 72 pt == 1 inch. From that you can figure out pointer-per-inch|centimeter|millimeter|pica.

How to combine many rows into one row

Hi all,
I have a question regarding to how to combine many rows into one row?
My result set is like that:
ITEM_NO NAME1
11 abc
11 cde
11 fg
Want to combine them into
ITEM_NO NAME1
11 abc;cde;fg
would anybody can tell me how to do that? Thanks
Ray

You can check this --
satyaki>
satyaki>
satyaki>create table t
2 as
3      select 11 ITEM_NO, 'abc' NAME1 from dual
4      union all
5      select 11 ITEM_NO, 'cde' NAME1 from dual
6      union all
7      select 11 ITEM_NO, 'fg' NAME1 from dual;
Table created.
satyaki>
satyaki>
satyaki>
satyaki>set lin 10
satyaki>
satyaki>desc t;
Name              Null?    Type
ITEM_NO                    NUMBER
NAME1                      VARCHAR2(3)
satyaki>
satyaki>
satyaki>set lin 1000
satyaki>
satyaki>
satyaki>
satyaki>SELECT ITEM_NO,
2         LTRIM(MAX(SYS_CONNECT_BY_PATH(NAME1,';'))
3         KEEP (DENSE_RANK LAST ORDER BY curr),';') AS NAME1_DET
4 FROM   (SELECT ITEM_NO,
5                 NAME1,
6                 ROW_NUMBER() OVER (PARTITION BY ITEM_NO ORDER BY NAME1) AS curr,
7                 ROW_NUMBER() OVER (PARTITION BY ITEM_NO ORDER BY NAME1) -1 AS prev
8          FROM   t)
9 GROUP BY ITEM_NO
10 CONNECT BY prev = PRIOR curr AND ITEM_NO = PRIOR ITEM_NO
11 START WITH curr = 1;
   ITEM_NO NAME1_DET
        11 abc;cde;fgRegards.
Satyaki De.

How to coalesce many rows into one?

I am using SSMS 2008 R2 and am simply trying to coalesce many rows into one. This should be simple I think, but it is currently repeating data in each row. Consider:
create table test
Name varchar(30)
insert test values('A'),('B'),('C')
select * from test
select distinct Name, coalesce(Name + ', ', '')
from test
How can I rewrite this to achieve one row like: A,B,C
Ryan D

Or as a variation
Declare @S varchar(MAX)
set @S = ''
select @S = @S + ', ' +Name
from test
Select substring(@s, 2, length(@s))
Would be interested to know performance difference between this style and the XMLPath used by Naomi though. The XMLPath technique certainly looks cleaner
A samll correction for RyanAB's solution:
Select substring(@s, 2, len(@s))
For more information about Len(), please see:
http://technet.microsoft.com/en-us/library/ms190329.aspx
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

Converting multiple columns into one.

All,
I have a requirement to convert multiple columns into one. Following is the pseudo code of current implementation. It unions the various columns ( col1, col2........) into a new column new_col. But perforamnce is extrmely slow owing to multiple unions. It may be noted that tables and where conditions of all these queries are same.
Can you help me create a more efficient query?
select col1 , col2, col3, col4 from my_tables where some_cols = my_condition;Below is the query used to convert these columns into one.
select col1 new_col from my_tables where some_cols = my_condition
union all
select col2 from my_tables where some_cols = my_condition
union all
select col3 from my_tables where some_cols = my_condition
union all
select col4 from my_tables where some_cols = my_condition

Without looking at those things you could be barking up the wrong tree by assuming the issue relates to the unioning of queries or other such things.Well, might be.........
Execution time of this query (just the execution time not the retrival) is around 34 seconds with connect-by clause for returning 22,000 records.
Here's the plan
Execution Plan
| Id | Operation                          | Name                        | Rows
| Bytes | Cost (%CPU)|
|   0 | SELECT STATEMENT                   |                             |   326
| 33904 |   135   (2)|
|   1 | SORT ORDER BY                     |                             |   326
| 33904 |   135   (2)|
|   2 |   MAT_VIEW ACCESS BY INDEX ROWID   | MV_COMQ_RM_DEAL             |     1
|    62 |     1   (0)|
|   3 |    NESTED LOOPS                    |                             |   326
| 33904 |   134   (1)|
|   4 |     MERGE JOIN CARTESIAN           |                             |   326
| 13692 |     3   (0)|
|   5 |      VIEW                          |                             |     1
|    13 |     2   (0)|
|   6 |       COUNT                        |                             |
|       |            |
|   7 |        CONNECT BY WITHOUT FILTERING|                             |
|       |            |
|   8 |         FAST DUAL                  |                             |     1
|       |     2   (0)|
|   9 |      BUFFER SORT                   |                             |   326
| 9454 |     3   (0)|
| 10 |       TABLE ACCESS BY INDEX ROWID | SF_SEARCH_IDS_TMP_COMQ      |   326
| 9454 |     1   (0)|
| 11 |        INDEX RANGE SCAN            | IDX1_SF_SEARCH_IDS_TMP_COMQ |   349
|       |     1   (0)|
| 12 |     INDEX RANGE SCAN               | IDX_MV_COMQ_RM_DEAL         |     9
|       |     1   (0)|
-----------------------     Hope, It's readable.......
I would have posted sample data and query but........I cant do that...:(

How do i convert multiple tracks into one large mp3?

how do i convert multiple tracks into one large mp3?

Hi,
You can use an app such as Audacity or Join Together to create one larger file. If AAC file used instead of mp3, you could use GarageBand.
If you have the original CD, you can join the tracks whilst re importing disc.
Jim

How can you convert a BufferedImage into a RenderedImage?

I'm using the Histogram class and I'm wondering how I can easily convert my BufferedImage into a RenderedImage so that I can use this class.
Of course, if I can use my BufferedImage object with the Histogram class, please let me know =D.

If you have Acrobat 11, you'd select: File > Save As Other > Image
and select one of the available image formats.

Can 2 people plug earphones into one iPad to watch a movie at the same time?

can 2 people plug earphones into one iPad to watch a movie at the same time?

If you purchase a splitter per the suggestions from the others, be sure that the earphones have their own volume control. Some, including the absolutely excellent Bose Quiet Comfort "15," rely on the iPad for volume control.
Also be prepared for the possibility that neither listener will be able to get the sound as loud as he/she wishes.

I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album?

I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album? I was trying to move several albums onto a USB drive and it stated all other files exist at this location. They are pictures taken at different times and have the same number I guess.

In iPhoto albums may contain photos with the same file name - iPhoto handles that just fine
If you are exporting them to move somewhere else use the sequential file name feature of export to give each file a unique name
LN

Can I convert many XMLs into one Excel Sheet?

Similar Messages

Maybe you are looking for